TosOBEX.exe eats up my Memory

Hello,
I'm currently using the Toshiba bluetooth stack, that came with the billionton BT Dongle, to manage my BT connections. The BT manager works fine, but I've noticed that TosOBEX.exe eats up my memory causing my PC to run slow. I figured it's the problem 'cause when I end TosOBEX.exe, my PC speed gets back to normal.
Is this normal? Or did I do something wrong?
Thank you?

Is your bluetooth stack up to date ? If not update it.
http://aps2.toshiba-tro.de/bluetooth/?page=download
In your case I would also check your COM ports. Maybe there is a conflict with an other device.

Similar Messages

Adl.exe eating up 100% CPU (CS5, Windows)

Hi,
In Flash Professional CS5 on Windows 7 (64bit), whenever I test a movie (ctrl+enter) targeted at AIR, the adl.exe process starts eating up 100% of the cpu at intervals, that is:
- adl.exe eats up 100% of the cpu for several seconds
- then back to normal for several seconds
- then eats up 100% of the CPU again for several seconds
and so on.
I see it in the task manager that the process eating up all CPU is adl.exe; obviously the application being tested (and the whole computer) becomes almost unresponsive on CPU peaks.
If I publish the very same test app as an air package, install and run it, it runs fine, with near to 0% cpu consumption, which is normal.
The raise in CPU consumption does not coincide with anything significant happening, it seems just a random (though almost regular in intervals) oscillation, with no apparent cause.
My swf is not very cpu greedy, it is almost idle. I do ctrl+enter and then don't touch anything, just leave it running (which does almost nothing) and the CPU usage goes up and down. I repeat, this does NOT happen if I publish, install and run the AIR application without the ADL debug launcher.
Has anybody run into the same problem?
Is there any fix?
thanks
m.

Hi ,
Would you mind help me with following questions :
1. What is your AIR version? Could you please have a try on our latest AIR build(http://get.adobe.com/air/?promoid=BUIGQ)
2. In Which running mode you encounter this performance issue? In an IDE , or installing it? According to the prior post, matteosistisette met this issue when running it on Flash CS5 with ctrl+enter NOT by installing it after packaging it as an AIR file
3. I tried with winxp on some machines (such as; dell OPTIPLEX 760 and laptop thinkpad :T400) , using adl to launch it .
   Set it to the front application ,and do nothing, the cpu is 20% - 23%
   Minimize the application, and the cup is 0% – 2%
   Do some operations on the app , it is 30% - 70%
   So have you tried on other machines, such as : winxp on PC instead of na Imac, ,and what's the CPU usage? and relevant PC processor and memory info
4.A little confused about the following info you mentioned:
"I speak of the screen following
the name entry, once all transitions have finished and the puzzle has
exploded it's pieces and the main menu is simply sitting idle"
that the main menu sit idle is the expected result/designed by your app, right?
thanks
Alisa

Since i up graded to itunes 10.5.2 i cannot access itunes store fully ,i have apple mobile device exe eating my cpu at 97% and now i tried to sync my ipod and it said that i needed to restore my ipod ,this i did and now i cant access my ipod library

this has got ridiculous now i cant access itunes tore,my ipod says there is no music on it even though i watched it sync nearly 5000 tunes and the program apple mobile device exe eats my cpu at 97% it slows my computer to a crawl should have had the courage of my convictions and stuck to itunes version9 at least that worked.tried resetting netsh winsock,flushing my dns all not worked.this has to be sorted out...and quick

Hi,
I have tried and confimed that you can download the previous version from some web-site about the version 10.5.1.42.
Remove/un-install 10.5.2.11 and restart your computer.
Install the old version 10.5.1.42
and then you can find the "Devices" on the left column and showing synchronizing when you connect the cable.
Good luck

FF15 hangs whenever plugin-container.exe is loaded in memory

I need help. Since at least in v14 and now v15, FF hangs becoming unresponsive whenever plugin-container.exe is loaded in memory, as monitored with Process Explorer of SysInternals. This happens in FF with all plugins manually disabled and with no extensions, loaded in either "normal" or safe mode, even after having reset it to default state in about:support. (The unresponsiveness is not absolute, since every some 90 seconds there is a brief refresh of the screen as indicated by an acknowledging screen change due to a prior click or mouse motion. (In this quasi-frozen condition, FF slowly ramps up its memory usage while plugin-container keeps alternating between two smaller vales in Process Explorer.) After some 15-20+ minutes, plugin-container unloads itself and FF starts responding again. If I then visit a page that triggers the loading of plugin-container, the described problem develops once more. Blocking the loading of plugin-container (e.g.,renaming or moving it out or blocking it with the firewall) hangs FF. The solution for FF 3.6.6 for dom.ipc in about:config does not work in these versions.
Ironically, the Mozilla support page about "Firefox crashes when loading certain pages" (http://goo.gl/i02Xz) is a page that loads automatically plugin-container and hangs my machine, so I had to enter the forums by selecting a different problem.
This occurs in a Windows-7 machine with sufficient memory (1025 MB physical, 1025 MB virtual) and a lean configuration (monitored and enforced with Autoruns and Process Explorer), which runs very well other browsers such as Chrome, Opera o IE9. I have been using FF since its v2 and would hate to switch permanently to a different browser. Any informed advice on how to fix the problem (or disable the plugin- container in a working manner) would be much appreciated. TIA.

Solved by blocking the loading of Plugin Container . . .
Searching in the bugzilla.mozilla.org site for text or attachments on bugs related to dom.ipc.plugins...., I encountered several references to a Windows environment variable MOZ_DISABLE_OOP_PLUGINS, for example in the patch at http://goo.gl/jYJKL. I then added this variable to the Windows 7 system environment of my machine setting it to 1. It works : FF15 no longer loads plugin container (and therefore does not hang) when visiting web pages that before froze the browser.NB : As I discovered shortly thereafter in googling this environment variable, this method of blocking the loading of plugin container was already reported 3 weeks ago by big_v in the Mozilla support forum, http://goo.gl/v7prA. Chapeau.

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Firefox is eating up my memory

Initially Firefox uses <100,000kb of memory when first opened. But after it has been open for so long, it starts to eat up my memory. Earlier i clocked it at 998,373kb when i realized my computer was slowing down. If i re-open Firefox, it starts off fine again but repeats the process

Hello, I am also having the same problem. 1GB memory it takes.
My config: 2 GB Ram, Windows 7 ultimate, core 2 duo 2.66 GHz.. I have several addons installed. How come it takes 1GB,. This is crazy lol..

How do i make the vurtrel memory smaller, it eating all my memory, and i have to shut down alot cuz it freezes my computer.

every time i open firefox it eat tons of memory in both the VM, and Usages, then my CPU will start getting really high to a point where everything stops working. It only happen since the last two updates I have did with firefox, but getting to a point where i am thinking about going back to explore. I really like firefox too.

That would be command + 0 (zero) on a Mac.
*https://support.mozilla.com/kb/Keyboard+shortcuts
*https://support.mozilla.com/kb/Page+Zoom

Pcdrcui.exe crashes out of memory

I've expanded the machine to 12 GB of memory.
PCDRCUI.EXE consumes all available memory and then crashes. Off hand I do not think this is proper behavior.
4319-2ru machine Win 7. Patched up to date.
{^_^}

Hi, Wizardess
I did some research and found this thread from Microsoft that may help. This .exe is a part of PC Doctor, which has caused issues like this on other user's machines. The Microsoft thread pretty much recommends uninstalling the program, which, if you do not use it, might not be a bad idea, in my opinion. There are also some other suggestions available on the thread if you would like to try those.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Javaw.exe eating memory

I'm running a particular piece of software called Mailloop that appears to use javaw.exe. After about 6 hours I see in Task Manager that javaw.exe has gone from using approximately 50 MB virtual memory to over 500 MB. If I terminate the process, everything drops back to a normal level (software quits as well naturally). I've read on other forums that this can happen w/ javaw.exe, but is there any fix?

How can you say that it is app problem ? The JVM is mature, and fairly well tested. It is unlikely that large bugs like this would be either unfixed, or at lest not "well known".
trouble even for a shorter period.Is there any work
around to find out what is the actual problem ..?A profiler. It is likely that the app is not closing something correctly (a socket, file, etc) or hanging on to objects once it is finished with them.

Wfmlrgsm.exe error. The memory could not be read.

Dear experts,
I have this Installation:
Oracle apps 11 on Windows XP Pro. Visual C++, cygwin.
After I bring up the database listener, and Apache Server,
I then start the service,
OracleConcMgrTEST
which is:
C:\oapps11\testappl\fnd\11.5.0\bin\CCMSVC.exe TEST
But I keep getting a pop up error window:
Wfmlrgsm.exe – Application Error
The instruction at "7C911F52" referenced memory at "4543414F". The memory could not be "read".
Click ok to terminate
Click on Cancel to debug the program.
The file is:
$ find . -type f 2>/dev/null | grep -i "Wfmlrgsm.exe"
/cygdrive/c/oapps11/testappl/fnd/11.5.0/bin/WFMLRGSM.exe
When I have pressed cancel to debug, it brings up Visual C++ debugger.
I see:
7C911F22 E8 2C BA 04 00 E9 29 F0 FF FF 0F B7 C0 50 56 E8 è,º..é)ðÿÿ.·ÀPVè
7C911F32 CB 00 00 00 E9 34 65 00 00 3B 5F 14 0F 87 3B 83 Ë...é4e..;_..‡;ƒ
7C911F42 03 00 E9 72 97 00 00 8B 70 04 83 EE 08 89 75 C8 ..ér—..‹p.ƒî.‰uÈ
7C911F52 8A 46 05 88 45 E3 8D 4E 08 8B 39 89 BD 48 FE FF ŠF..Eã.N.‹9‰½Hþÿ
7C911F62 FF 8B 56 0C 89 95 78 FF FF FF 8B 12 3B 57 04 0F ÿ‹V.‰•xÿÿÿ‹.;W..
7C911F72 85 F3 23 02 00 3B D1 0F 85 EB 23 02 00 8B 8D 78 …ó#..;Ñ.…ë#..‹.x
7C911F82 FF FF FF 89 39 89 4F 04 3B F9 75 2F 0F B7 0E 8B ÿÿÿ‰9‰O.;ùu/.·.‹
7C911F92 D1 C1 EA 03 89 95 40 FE FF FF 83 E1 07 33 FF 47 ÑÁê.‰•@þÿÿƒá.3ÿG
7C911FA2 D3 E7 89 BD 50 FF FF FF 8D BC 1A 58 01 00 00 33 Óç‰½Pÿÿÿ.¼.X...3
454340FF ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543410F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543411F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543412F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543413F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543414F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543415F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543416F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543417F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543418F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543419F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
454341AF ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
Call stack:
NTDLL! 7c911f52()
MSVCRT! 77c2c3c9()
MSVCRT! 77c2c3e7()
MSVCRT! 77c2c42e()
FNDCORE! 7aa6c96e()
FNDCORE! 7aa9ae36()
WFMLRGSM! 004011ea()
WFMLRGSM! 00401567()
WFMLRGSM! 0040411d()
KERNEL32! 7c816fd7()
I've also got this error when I:
Bring up the tutorial on making Oracle Forms.
Any ideas on how to make this error go away?
Thanks

Visual C++ Help, About, gives:
Visual C++ 6.0
BTW, Service Pack 3 that you mentioned in the other thread:
Re: Install of apps 11.5.8 on Windows - Problems with PreReqs
Is it the service pack for XP? Or, for C++?
Windows Event Viewer logs:
EvntAgnt
TraceFileName parameter not located in registry; Default trace file used is .
TraceLevel parameter not located in registry; Default trace level used is 32.
TraceFileName parameter not located in registry; Default trace file used is .
TraceLevel parameter not located in registry; Default trace level used is 32.
OracleFormsServer-Form
The description for Event ID ( 0 ) in Source ( OracleFormsServer-Forms60TEST ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: OracleFormsServer-Forms60TEST Started.
Here are the files I found:
OracleApps@green /cygdrive/c/oapps11
$ find . -type f | grep -i "adadmin"
./testappl/ad/11.5.0/bin/adadmin.exe
./testappl/ad/11.5.0/lib/adadmin.obj
./testappl/ad/11.5.0/res/adadmin.res
To relink, what do I do? Shut everything down, and run the exe?
Thanks a lot!

Why on close am I geting " firefox.exe -Application error - The memory could not be "written" "?

Why on close am I geting " firefox.exe -Application error "The instruction at "0x00000000" reference menory at "0x00000000". The memory could not be "written" Click OK to terminate."?
This is on Window XP
A program White Smoke was loaded into this unit about 3 month ago and a popup to buy started appearing 1 week ago. I unistalled the program and i found virus that was removed.
The unit will not allow a system restore also.

You do not need to start Firefox to disable the Java Quick Starter, you can do that via the Java Control Panel (Control Panel > Java > Advanced)
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Adobe reader x eats up my memory

I run my adobe reader x (10.1.1) on windows 7. In most cases, when i open the first pdf file, everything works fine. Problem occurs when i try to open the second one. The reader stop working and the memory usage goes up to like 1.6 Gb and keeps increasing. I have to end the prcess before it eats up all my memory. But for some other files, like the pdf file from http://unicode.org/charts/PDF/U0370.pdf, i cannot open at all. Is it a universal problem or just a special case happen to me?
Thank you for the reply.

it happens to both. I can see multiple instances of Adobe Reader, only one of them is acquiring large amount of memory
As for the pdf i linked, when i tried to opening it, everything stucked. Two processes of adobe reader were shown in task manager, and one of them used up almost all memeory. So i had to terminated it. For other pdf files which caused problems (when they are opend as a second pdf file), i can always reopen it as a first pdf file without problem. This one is different; i can never open it, no matter open it directly or download it and open it locally. i don't know why.
One thing stranged is that this issue never happened before until two days ago, i used to open 10+ pdf file for paper reviewing.
Thanks for your reply.

Cfgrid eating up all memory

I'm currently developing an application which makes use of
the new ajax CFGRID, displayed in a CFWINDOW.
I've noticed that with each page containing a grid,
iexplorer.exe uses more and more memory (on the client side). Even
a simple page refresh clearly shows the memory usage going up every
time. Users end up with an unresponsive IE after about twenty
minutes of working with the app because of their memory running
low.
This is of course unacceptable behaviour. Has anyone found a
solution for this problem?

Steps to reproduce the problem:
1. save the following code as test4.cfm
2. run the code, the page will refresh every 2 seconds
(mimics a user browsing on your website)
3. press ctrl-alt-del, open the task manager, find the
iexplore.exe task and watch the mem usage going up!
<cfif not isdefined('url.cfgridpage')>
<meta http-equiv="refresh" content="2">
Browser memory test - clearly shows the cfgrid leaking!
<cfform>
<cfgrid name="browseGrid" format="html"
bind="url:test4.cfm?cfgridpage={cfgridpage}&cfgridpagesize={cfgridpagesize}&cfgridsortcol umn={cfgridsortcolumn}&cfgridsortdirection={cfgridsortdirection}">
<cfgridcolumn name="artistid">
</cfgrid>
</cfform>
<cfelse>
<cfquery datasource="cfartgallery" name="qRead">
select * from app.artists
</cfquery>
<cfoutput>#serializeJSON(queryConvertForGrid(qRead,
cfgridpage, cfgridpageSize))#</cfoutput>
</cfif>

On Windows 2012,WMIPRVSE.EXE WMI service leaks memory when registering SMO to SQL Server events

Hi,
I have written an application which registers to events using SMO API.
I have noticed that after some time, suddenly event flow from SQL Server stops. and I can't event shut down my application properly, as StopEvents() method of SMO hangs the shutdown.
After further investigation, I have found out that a spawned process (probably by SQL Server) WMIPRVSE.EXE memory grows rapidly.
As soon as this process reaches about 482MB ~ 500MB memory consumption. I didn't notice any particular CPU peak for this process.
As I manually kill this process, I'm able to shutdown my application properly and even re-register it to events.
I may add that this issue doesn't happen on an regularly updated Windows 2008.
I managed to find this hotfix (the only one for 2012) but it won't install!!! http://support2.microsoft.com/kb/2790831/en-us?lc=1033
In an act of frustration , I decided to bypass your process, and write a heuristic mechanism to find WMIPRVSE.EXE which is related to my application, and kill it whenever it reaches the mentioned sizes.
But it's not the answer.
Please provide a proper hotfix for 2012, as you did with Windows 2008, or an answer regarding what is wrong?
simple search reveals that this process was very problematic in 2008...
Regards,
Adi

Hi Adi,
à
I managed to find this hotfix (the only one for 2012) but it won't install!!! http://support2.microsoft.com/kb/2790831/en-us?lc=1033
Would you please let me know detailed edition information of this server 2012? Was it Windows Server 2012 Standard
or
Essentials or any other?
Based on your description, I understand that
KB2790831 can’t be installed in that problematic Windows Server 2012. Would you please let me know the error message that you can get when failed to install the Hotfix? Please perform a
clean boot and check if still can’t install this Hotfix.
Meanwhile, please check if
KB2934016 was installed on your Windows Server 2012? If didn’t install, please install this update rollup and check if this issue still exists.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

On Windows 2012,WMIPRVSE.EXE WMI service leaks memory

Hello all,
In my Windows 2012 9700 server,I have installed LSI provider and I am running associator queries to LSI Provider which further interacts with WMI service which acts as a CIM Object Manager(CIMOM).When I run these queries,I am seeing huge memory
usage increase in the WMIPRVSE.EXE service.
I was browsing through some of the articles and came to know this is a known issue.But Microsoft has not applied this issue to Windows 2012 server.Below are my findings,
Maximum memory usage by the particular host:536870912 Bytes.After which it would crash and a new wmiprvse.exe would come up.I did not change this memory limit because it's not the procedure to resolve this issue.
Can anyone who has already experienced this issue,could guide me?
Thanks in advance.
Regards,
Ravi

Hi,
Thanks for posting.
Firstly, I recommend you to use Network Monitor to check the source of the high CPU in WMIprvse.exe:
Using Netmon to figure out the source of high CPU in WMIprvse.exe
In addition, maybe you can enable WMI logging to find more detailed information:
WMI Debug Logging
Best regards,
Susie

TosOBEX.exe eats up my Memory

Similar Messages

Maybe you are looking for