Total actual cost

Hello experts.
When we exacute transfer posting with movement type 631.
Especially we transfer special stock to consignment stock.
Price difference was occured.
So I've checked production order for the special stock.
Then I can find that the production order item's standard price is different from master data.
More detail I can find total actual cost has difference between them.
So I'd lke to know the calculation logic of total actual price.
Regards.

Hi,
Please check the thread . will be some what useful.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/d0/fc3cd891cf11d38ab70000e83234f3/content.htm,
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4c/013f188c7a11d38ab40000e83234f3/content.htm,
Regards,

Similar Messages

  • Field name of Total Actual Cost

    Hi,
    Can anyone tell me the Field name of Total Actual Cost in a PM Order.
    I tried and found a BAPI which will give all the costs involved in the order but i want to know the exact Field Name  and  Table from which it comes.
    Thanks,
    Amit.

    Hi Sunil,
    Can you tell me the Table Name also? I'm getting Structure but to extract data i need the table name also.
    Thanks,
    Amit.

  • Total actual cost for a given PM Order

    hello all,
    how do i get total actual cost for a given PM order (in IW33 under cost tab we have total actual cost)..
    is stored in table or do i need to use any function module.....
    thanks in advance....

    Hi Vinay,
    You can use the following logic for extracting the Actual cost of a PM order.
    Pass the Order No (AUFNR) in Table AUFK and fetch the Object number (OBJNR).
    Pass OBJNR value in table COEP.
    You can get the actual cost of the order in COEP table.
    Please mark this as correct if it resolves your issue.
    Regards,
    Joydeep

  • Table for total actual cost and total actual revenue.

    Hi Gurus,
    Can anybody pls tell me what is the table for total acutal cost and total actual revenue for a service order.
    Thanks in advance.
    Regards
    Satish

    Check COSP

  • How can I crosscheck Total Planned/Actual Cost in MCI3 (S061) correct?

    Hi Masters,
    I want to crosscheck "Total Planned Cost" and "total Actual Cost" in MCI3(S061) - Location and Planning analysis is correct or not.'
    In my current system I am trying to compare the Orders in IW39 and MCI3 but costs are not matching.
    I have done some analysis and found that the costs are updated in S061 from PMCO.
    But for same Orders in months e.g August I am getting posting for July,August and Semptember.
    So I am not sure how I can compare the values of "Total Planned Cost " and Total Actual Cost" in S061 to IW39.
    If it is possible to compare what selection criteria I should use for fetcing the Orders from AUFK or IW39. Which dates are I should used ( Date range - Period, Basic start/end dates, Actual start/End Dates).
    With Best Regards,
    Narendra dere
    SAP- Manufacturing.

    Hello,
    Comparing the MCI3 & IW39 cost figures is not right as per my knowledge.
    S061-->following below logic for calculations for Actual Cost and Planned Cost
    Total planned costs for PM measures
    Sum of planning costs for PM measures
    This key figure will be updated when a PM order with a time reference is created and changed at the starting date of the posting period, in which the costs were created.
    Total of the actual costs for PM measures
    This key figure is updated with every cost-relevant transaction for a PM order (for example, completion confirmation, material withdrawal) for the beginning date of the posting period, in which the costs were created. For historical orders, the key figure is updated when creating and changing a historical order with a time reference to the starting date of the posting period which was determined for the reference date of the order.
    Total of actual costs for companyu2019s own material for PM measures
    This key figure is updated for every cost-relevant operation for a maintenance order (for example, time confirmation, material withdrawal).
    For historical orders, the key figure is updated when creating and changing a historical order with a time reference to the starting date of the posting period which was determined for the reference date of the order. The key figure update is important from a business point of view only when a material removal is made.
    Total of actual costs for external material for PM measures
    This key figure is updated with every cost-relevant transaction for a PM order (for example, completion confirmation, material withdrawal) for the beginning date of the posting period, in which the costs were created.
    Regards,
    Rakesh

  • Break Up of Actual Costs in a report for list of orders

    Hi All,
    SAP standard reports displays only the total planned & total actual costs.
    Is there any standard report available which can display break up of planned & actual costs along with total costs, for list of orders (e.g: time, material and external resources consumption).
    Thanks in advance
    JK

    hi
    you can find the material cost,external service etc in the standard cost report itself select the change layout and select the items you want to display ,you can get the result
    regards
    thyagarajan

  • Report to see the actual cost and Revenue..

    Hi all,
    My Sales Cycle is Sales Order --> Delivery --> PGI --> Invoice --> and Accounting.
    When we do the PGI GOGS account entries will generate,
    When we do the Invoice Revenue and customer account entries will generate.
    Now my customer wants to see the total Actual cost as well as total revenues in a single report (Sales order wise).
    Is there any Standard report availble for this?????
    Thanks and Regards,
    SUBBU..

    Hi,
    You will have to use LIS and develop a std or flexible analysis to develop this report.
    Check the below links
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOLIS/LOLIS.pdf
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/LOLIS/LOLIS_KOMPONENTEN%20DES%20LIS.pdf
    Regards,
    Amit

  • Extraction of actual cost in the project

    hello all,
    Kindly suggest if any function module is available to extract actual cost incurred in the project? The actual cost includes the cost of material consumption, activity confirmation, Fi posting. The intention is to get the total actual cost on the WBS at one place.
    Regards,
    Sudhir

    RESOLVED

  • Actual Cost in Valuated Stock

    Dear PS experts,
         I am facing an issue in case of actual costs in 'valuated project stock' scenario.
          The scenario is as following:
       1. A material(assembly) is attached to network having planned costs as 100 Euros.
       2. The planned costs for project is also now 100 Euros.
       3. This material is assembly made from using 2 materials.
       4. The assembly is made by subcontractor.
       5. The breakup of the costs is 80 euro for 2 material components and 20 euro as subcontracting charges.
       6. When I run MRP and covert a req. to PO, the commitment is 20 euro for subcontracting order and 80 euro for material components PO.
      7. After I receive the 2 material components in stock, the actual cost(statistical cost element is hit) for project becomes 80 euro.
      8. When I send these components to the supplier and he converts it into assembly material, at GR the entries are like this:
              a. Commitment is reduced of 20 euro, actual cost is incurred for 20 euro for subcontracting charges.
              b. The consumption is booked for 2 components(movement type 543), actual cost incurred is 80 euro.
                 So total actual costs at this stage is 100 euros.
    9. Now the assembled material is issued against network activity ( movement type 281 Q), this again updates the the consumption at project with value 100 euro.
       In this way, I am seeing the actual cost at project is 200 euro. I think it is not correct, does anybody have any opinion on this. I am not able to understand if it is related to valuation categories.
      If you are having any clue about it, please let me know. Thanks in advance !
    Regards,
    Mahendra Dighe

    Hi,
    I hope this scenario clarifies your problem.
    assly- X- 100
    material A- 40
    Material B-40
    Sub contracting charges20
    MAterail A & B came to stock (project stock) so inventroy 80 INR(statistical)
    now subcontracting PO for 20 INR
    you can not issue project stock to subcontractor so you have to transfer A & B to plant stock. then do 541 for subcontracting
    now in project you are having actual -0 and commitment 20
    when you confirm subcontract PO then material X with 100rs will come to the stock. this will reflect as 100 INR in project as an inventory. just check cost element report.
    when you issue it to network then inventory become zero and actual consumption shows you 100 INR  again check yourcost element report.
    i think this is how subcontracting works... lets wait for other experts comment.
    I dont understand why you are doing 543 movement ( goods isue for sale order)?
    venkatesh
    Edited by: venkatesh  kulkarni on Dec 3, 2009 8:38 AM

  • WBS Element Actual Cost and 'Detailing the  Value Type ' issue

    Hello BW Experts ,
    I want to extract the WBS Element Actual Cost and Revenue.
    I have selected the data source 0CO_OM_WBS_6 .
    In this data source there is a field  Detailing the value type ' 0VTDETAIL.
    As per SAP BI Help if the value of this field exists between 1 to 4 then it is actual cost of WBS ( also Key figure Category 0METYPE should be 1000 for actual cost and for revenue it is 1001).
    value 4 of 0VTDETAIL means CO Activity Allocations.
    When I see  the data from this data source in RSA3 , I could not get any WBS whose 0VTDETAIL is 1 to 4 and Key Firgure Category as 1000, value type = 10.
    Is there any other data source I should select in order to get actual cost for WBS ?
    I can see the settelment cost whose 0VTDETAIL = 5 through this data source in RSA3.
    But I want to see the data for the Actual Cost whose 0VTDETAIL = 4 .
    What could be the reason ?
    Thanks in advance .
    Amol.

    Dear Oscar,
    Thanks for your response,
    The Actual Cost posted by our Functional Consultant is USD 250, but i am getting the Total Actual cost is ZERO (Sum of -250 +250) as i shown above.
    the posted  actual cost is +250, finally we need this figure only,
    if i do restriction on Sender receiver Indicater field with S than i will get Actual Cost 250, but in SAP standard RKF for Actual Cost there is no restriction on Sender receiver Indicater field (S & H)
    I hope you got my point now.
    Thanks
    Amar Reddy

  • Total planned costs

    Hi experts,
            iwant get the total planned costs and total actual costs in plant maintainance which are the fields are suits in r/3 side and which are infoobjects suits in bw side, if those are derived one then which are fields in r/3 and what is the formula for getting those values.
    Thanks & Regards,
    sathish.k

    By using generic datasource as by fs advise closed

  • Reoprt for Total Plan Revenue & Cost vs Total Actual Revenues & Cost

    Hello Gurus,
    Business has requested to extract overall plan VS actual values and total plan revenue & cost VS total actual revenue & Cost for all open sales orders  Is there any report to fulfill this requirement. If yes please let me know how to get data from SAP.
    Appreciate your help!!
    Regards,
    Prakash.

    Stil there is no reply yet.

  • Total up of Actual cost to Upper level

    Hi All ,
    I have WBS structure with 4 to 5 level .  Now I want sum of Actual cost from forth level to first level of GR value + Goods Issue value (from table QBWE -SALK3 & MSEG-
    BWART(281 ) & value from DMBRT  )  to Level 1 WBS  like standard report . I check in many table but no tables give such total value .
    Thanks ,
    Virendra

    Hi,
    Well I think, you can't get that level wise WBS actual  data in a table or report. You have to filter.
    As Amit suggest, CJI3 have the required info as you want. And as I understood, you want to sum-up cost only to some WBS levels. Right..You can manually select your WBS range using multiple selection criteria in CJI3 selection screen from 1 to 4 level and then sum-up there.
    Regards
    Shishir

  • Function Module to Find Actual costs and Total Cost Commitments

    Hi PS Experts ,
    Please let me know if there  is any function module to  find Acutal costs and Total cost commitments by passing WBS element as Input .
    Regards,
    Karan

    Hi Karan,
    I think for actual cost - there is definately one FM availbale. Try to find it out.
    Just ensure - if you are using Network Activity then you may have to pass NWA OBJNR into this FM to get actual cost. As some entry posting happens against NWA like Timesheet. Hope it will give you some idea to get rid on your issue.

  • Total Actual Qty is 0 in Cost Analysis

    Hi All,
    When I run Cost Analysis in COR3, 'Total Actual Qty' for labor hours is 0 even if we have confirmed hours. Why does the cost analysis post 0?
    We confirm using COR6N.
    Thank you and good day!

    Hi
    Go to KP26 for the current period 10 and To period 10 fiscal year 2009, with respecitve cost and activity type., check whether proper cost has been assigned for the period.

Maybe you are looking for