Total and non-total lines in ALV grid
Hi all,
Does anyone know if there is any standard SAP functionality for retrieving the non-total/raw item lines that lies beneath a total line in an ALV grid (after the user has selected the total line)?
All helpful answers will be rewarded!
Best regards,
MV
Try the ALV event AFTER-LINE-OUTPUT may be it can help u to achieve ur requirement.
Append AFTER-LINE-OUTPUT event to the internal table T_EVENT.
CLEAR W_EVENT.
W_EVENT-FORM = SLIS_EV_AFTER_LINE_OUTPUT.
W_EVENT-NAME = SLIS_EV_AFTER_LINE_OUTPUT.u201CAFTER_LINE_OUTPUT event
APPEND W_EVENT TO T_EVENT.
FORM AFTER_LINE_OUTPUT
USING P_RS_LINEINFO TYPE SLIS_LINEINFO.
Here you have to write the logic to retrieve the 'total' line
ENDFROM.
Now call the alv FM
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = L_REPID "Program Name
IS_LAYOUT = W_LAYOUT "Layout of the Report
IT_FIELDCAT = T_FIELDCAT "Field Catalog for Report
IT_EVENTS = T_EVENT "For setting the events
TABLES
T_OUTTAB = T_OUTPUT "Report data Internal Table
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
Similar Messages
-
Display totals on the first line in ALV grid and ALV LIST
Generally we wll display totals at the end..
bu the requirement is to display it in the first line of the column.
how to display the totals in the first line?
I have used ALV GRID and ALV LIST (choice) using function modules.
Plz help me
.for example : Po qty : Should display total po qty on the first line of the Po line item.IN LAYOUT
ILAYOUT-totals_before_items = 'X'.
REGARDS
SHIBA DUTTA -
Mix AVG and Total for the same column in ALV grid
Hi,
We are using CL_GUI_ALV_GRID=>SET_TABLE_FOR_FIRST_DISPLAY, and I'd like to know if the following situation is possible.
Let's say we have a column which contains a number of hours, and we set it up to subtotal by period, but as an average rather than a total (DO_SUM = "C"). This is not a problem so far.
The problem is that we'd like for the "Grand Total" at the bottom of the ALV grid to total all of the subtotal averages, instead of calculating an average.
Ex:
Period Hours
2010/01 6.0
2010/02 7.0
2010/03 2.0
5.0 (This is an average... 6.0 + 7.0 + 2.0 / 3)
2011/01 12.0
2011/02 5.0
2011/03 4.0
7.0 (This is an average... 12.0 + 5.0 + 4.0 / 3)
12.0 (We want this to be a total of 5.0 + 7.0)
So we want the "grand total" line to be 12.0 which is the sum, but it currently comes out as an average.
Therefore we're looking to average at the sub total level, but we want a total of the subtotal levels at the grand total level for the same column.
Thanks,
DenisRefer to the suggestion given by Naimesh here Can we modify a sub-total in ALV making use of function GET_GLOBALS_FROM_SLVC_FULLSCR and the method GET_SUBTOTALS. You can see the parameter ep_collect01 refered in case of subtotals. Can you please check ep_collect00 for grand total in your case.
As said about EP_COLLECT00,here goes a classic example Modify grand total in ALV GRID
BR
Keshav
Edited by: Keshav.T on Sep 21, 2011 9:39 AM -
Total for a Numeric field in ALV Grid display
Hi all,
I am not getting the Total for a Numeric field in ALV Grid output. What might be the problem.
Regards,
Balavardhan.KCheck this code for subtotals and totals..
REPORT ZYFI_REPT007
NO STANDARD PAGE HEADING
LINE-SIZE 300
LINE-COUNT 50
MESSAGE-ID ZYFI.
TABLES : COOI, " Commitments Management: Line Items
LFA1, " Vendor master (general section)
VBEP,
RKPLN.
TABLE TYPES AND INTERNAL TABLES *
DATA : BEGIN OF TYP_COOI ,
OBJNR LIKE COOI-OBJNR,
SAKTO LIKE COOI-SAKTO,
MEGBTR LIKE COOI-MEGBTR,
MEINH LIKE COOI-MEINH,
WKGBTR LIKE COOI-WKGBTR,
REFBN LIKE COOI-REFBN,
RFPOS LIKE COOI-RFPOS,
SGTXT LIKE COOI-SGTXT,
BUDAT LIKE COOI-BUDAT,
LIFNR LIKE COOI-LIFNR,
END OF TYP_COOI.
DATA : BEGIN OF TYP_LFA1 ,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
END OF TYP_LFA1.
DATA : BEGIN OF IT_OUTTAB OCCURS 0,
OBJNR LIKE COOI-OBJNR,
SAKTO LIKE COOI-SAKTO,
MEGBTR LIKE COOI-MEGBTR,
MEINH LIKE COOI-MEINH,
WKGBTR LIKE COOI-WKGBTR,
REFBN LIKE COOI-REFBN,
RFPOS LIKE COOI-RFPOS,
SGTXT LIKE COOI-SGTXT,
BUDAT LIKE COOI-BUDAT,
LIFNR LIKE COOI-LIFNR,
NAME1 LIKE LFA1-NAME1,
END OF IT_OUTTAB.
DATA : IT_COOI LIKE TYP_COOI OCCURS 0 WITH HEADER LINE,
IT_LFA1 LIKE TYP_LFA1 OCCURS 0 WITH HEADER LINE.
*-- ALV Declarations
TYPE-POOLS SLIS.
DATA: IT_EVENTS TYPE SLIS_T_EVENT,
GS_EVENT TYPE SLIS_ALV_EVENT,
wa_fldcat type slis_fieldcat_alv.
DATA: S_LAYOUT TYPE SLIS_LAYOUT_ALV,
GT_PRINT TYPE SLIS_PRINT_ALV.
DATA: IT_FLDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: IT_SORT TYPE SLIS_T_SORTINFO_ALV.
DATA: V_REPID LIKE SY-REPID.
SELECTION SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_KOKRS FOR COOI-KOKRS NO-EXTENSION NO INTERVALS,
" Controlling Area
S_BUKRS FOR COOI-BUKRS NO-EXTENSION NO INTERVALS,
" Company code
S_GJAHR FOR COOI-GJAHR NO-EXTENSION NO INTERVALS,
" Fiscal Year
S_OBJNR FOR RKPLN-AUFNR MATCHCODE OBJECT ORDE,
" Internal order
S_SAKTO FOR COOI-SAKTO MATCHCODE OBJECT KART,
" Cost Element
S_BUDAT FOR COOI-BUDAT, " Debit Date
S_LIFNR FOR COOI-LIFNR. " Vendor
SELECTION-SCREEN END OF BLOCK B1.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
*-- Read data
PERFORM GET_DATA.
E N D O F S E L E C T I O N *
END-OF-SELECTION.
*-- Process the data and prepare the output data
PERFORM CALCULATE_FINAL_INFO.
*--Display Report output
PERFORM DISPLAY_REPORT.
FORM CALCULATE_FINAL_INFO *
Process the data and prepare final internal table *
FORM CALCULATE_FINAL_INFO.
DATA : L_OBJNR LIKE COOI-OBJNR.
SORT IT_LFA1 BY LIFNR.
DELETE ADJACENT DUPLICATES FROM IT_LFA1 COMPARING LIFNR.
LOOP AT IT_COOI.
L_OBJNR = IT_COOI-OBJNR+2(20).
SHIFT L_OBJNR LEFT DELETING LEADING '0'.
IF L_OBJNR IN S_OBJNR.
READ TABLE IT_LFA1 WITH KEY LIFNR = IT_COOI-LIFNR.
IF SY-SUBRC EQ 0.
IT_OUTTAB-NAME1 = IT_LFA1-NAME1.
ENDIF.
MOVE-CORRESPONDING IT_COOI TO IT_OUTTAB.
CLEAR IT_OUTTAB-OBJNR.
IT_OUTTAB-OBJNR = L_OBJNR.
APPEND IT_OUTTAB.
CLEAR IT_OUTTAB.
CLEAR IT_LFA1.
CLEAR L_OBJNR.
ENDIF.
ENDLOOP.
ENDFORM.
*& Form GET_DATA
Fetch the Data from the table COOI and LFA1
FORM GET_DATA.
SELECT OBJNR
SAKTO
MEGBTR
MEINH
WKGBTR
REFBN
RFPOS
SGTXT
BUDAT
LIFNR
FROM COOI
INTO TABLE IT_COOI
WHERE BUDAT IN S_BUDAT
AND LIFNR IN S_LIFNR
AND KOKRS IN S_KOKRS
AND BUKRS IN S_BUKRS
AND GJAHR IN S_GJAHR
AND SAKTO IN S_SAKTO.
IF SY-SUBRC EQ 0 .
Get the Vendor name from LFA1
SELECT LIFNR
NAME1
FROM LFA1
INTO TABLE IT_LFA1
FOR ALL ENTRIES IN IT_COOI
WHERE LIFNR EQ IT_COOI-LIFNR.
ELSE.
MESSAGE I999 WITH TEXT-013.
ENDIF.
ENDFORM. " GET_DATA
*& Form DISPLAY_REPORT
Display the output
FORM DISPLAY_REPORT.
PERFORM BUILD_CATALOG.
PERFORM FRM_PREPARE_EVENT_LIST TABLES IT_EVENTS.
IF NOT IT_OUTTAB[] IS INITIAL.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_FIELDCAT = IT_FLDCAT
IT_SORT = IT_SORT
IT_EVENTS = IT_EVENTS
TABLES
T_OUTTAB = IT_OUTTAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ELSE.
MESSAGE I999 WITH TEXT-013.
ENDIF.
ENDFORM. " DISPLAY_REPORT
*& Form BUILD_CATALOG
Build the Field catalog for the ALV Report
FORM BUILD_CATALOG.
DATA: V_INDEX LIKE SY-TABIX.
V_REPID = SY-REPID.
DATA: LS_SORT TYPE SLIS_SORTINFO_ALV.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = V_REPID
I_INTERNAL_TABNAME = 'IT_OUTTAB'
I_INCLNAME = V_REPID
CHANGING
CT_FIELDCAT = IT_FLDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE IT_FLDCAT WITH KEY FIELDNAME = 'WKGBTR'
TABNAME = 'IT_OUTTAB' INTO WA_FLDCAT.
IF SY-SUBRC EQ 0.
WA_FLDCAT-DO_SUM = 'X'.
MODIFY IT_FLDCAT FROM WA_FLDCAT INDEX SY-TABIX.
ENDIF.
READ TABLE IT_FLDCAT WITH KEY FIELDNAME = 'OBJNR'
TABNAME = 'IT_OUTTAB' INTO WA_FLDCAT.
IF SY-SUBRC EQ 0.
WA_FLDCAT-SELTEXT_L = 'Order'.
WA_FLDCAT-COL_POS = 1.
WA_FLDCAT-DDICTXT = 'L'.
MODIFY IT_FLDCAT FROM WA_FLDCAT INDEX SY-TABIX.
ENDIF.
LS_SORT-FIELDNAME = 'OBJNR'.
LS_SORT-SPOS = 1.
LS_SORT-UP = 'X'.
LS_SORT-SUBTOT = 'X'.
APPEND LS_SORT TO IT_SORT.
ENDFORM. " BUILD_CATALOG
*& Form FRM_PREPARE_EVENT_LIST
Build the Events
FORM FRM_PREPARE_EVENT_LIST TABLES IT_EVENTS TYPE SLIS_T_EVENT.
CLEAR GS_EVENT.
GS_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
GS_EVENT-FORM = 'TOP_OF_PAGE_REPORT'.
APPEND GS_EVENT TO IT_EVENTS.
ENDFORM. " FRM_PREPARE_EVENT_LIST
TOP OF PAGE
FORM TOP_OF_PAGE_REPORT.
CALL FUNCTION 'Z_YREPORT_HEADER'
EXPORTING
DL_TITLE = SY-TITLE
DL_REPID = SY-CPROG
DL_LINSZ = SY-LINSZ
EXCEPTIONS
OTHERS = 1.
ENDFORM. " FRM_TOP_OF_PAGE_REPORT
*& Form USER_COMMAND
Drill Down Functionality to Call the Transaction ME23
FORM USER_COMMAND USING P_UCOMM LIKE SY-UCOMM
P_SELFIELD TYPE SLIS_SELFIELD.
DATA : L_INDEX LIKE SY-INDEX,
L_REFBN LIKE COOI-REFBN.
L_INDEX = P_SELFIELD-TABINDEX. " holds the selected table index
CLEAR L_REFBN.
CASE P_UCOMM.
*-- On Double Click
WHEN '&IC1'.
CLEAR L_REFBN.
*-- Read the Current Line
READ TABLE IT_OUTTAB INDEX L_INDEX.
IF SY-SUBRC EQ 0.
L_REFBN = IT_OUTTAB-REFBN.
IF NOT L_REFBN IS INITIAL.
*-- Set the BES Paramater Id to the Current line Purchase Order Number
SET PARAMETER ID 'BES' FIELD L_REFBN.
*-- Call the Transaction Purchase Order Display with the above PO Number
CALL TRANSACTION 'ME23' AND SKIP FIRST SCREEN.
ENDIF.
ELSE.
MESSAGE E999 WITH TEXT-014.
ENDIF.
ENDCASE.
ENDFORM. " USER_COMMAND -
Hi
I have a webi report of the following structure.
Fleet Center- Section on this column Information
Driver Name- Break on this column
No of Hours spent-measure
I have subtotal by driver name------- then by fleet -
and then grand total of all the fleet centers
The webi report also have a drop down ( drill enanbled) feature on Fleet center and Driver Name
When a user selects a particular driver name (e.g Mark Edwards) ...
the report shows driver total, fleet total and grand total.....
The probelm is for a single driver I want to represent same information at fleet level and grand total level.....but on my report it shows total for all the drivers on that fleet......and grand total of all fleet.....even though in the drop down I have one driver selected.
Is this requirement a possibility..?....or is there a way to hide section total and grand total when I select only a particular driver ... as showing the subtotals by fleet and grand total for just one driver does not make sense.
Thank you,
boe userA couple of options come to mind. DrillFilters function could be used on the Driver Name object. If its non-blank then a driver has been selected in which case you would use a formula to not show the total that you dont want visible
something like this for section total cell (not real code, just an pseudo code):
IF DrillFilters([Driver Name]) = "" THEN [section total measure]
(we rely on the implied ELSE to return NULL)
same for Grand Total
another variation is to use DrillFilters and optional hiding of cells or blocks. The latter is something that as of R3 webi it doesnt have as standard but you can fake it.
Try my first suggestion first and if you dont like the result we can talk about optionally hiding the section and grand totals when a value is selected -
Color a line in ALV Grid Control
<<Do not ask for or offer points>>
Hi all,
How to color a line in ALV Grid Control using OOPs.
The appropriate replies will be rewarded.
regards,
S Philip
Edited by: Matt on Dec 22, 2008 11:05 AM<<Points unassigned - cut and paste not allowed. http://sgstocks.tripod.com/alvgrid_control.htm>>
Hi,
To color a line, the structure of the table must include a Char4 field for color properties
TYPES: BEGIN OF st_sflight.
INCLUDE STRUCTURE zsflight.
Field for line color
types: line_color(4) type c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
Loop trough the table to set the color properties of each line. The color properties field is
Char 4 and the characters is set as follows:
Char 1 = C = This is a color property
Char 2 = 6 = Color code (1 - 7)
Char 3 = Intensified on/of = 1 = on
Char 4 = Inverse display = 0 = of
LOOP AT gi_sflight INTO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
g_wa_sflight-line_color = 'C610'.
ENDIF.
MODIFY gi_sflight FROM g_wa_sflight.
ENDLOOP.
Name of the color field
gs_layout-info_fname = 'LINE_COLOR'.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_layout = gs_layout
CHANGING it_outtab = gi_sflight.
Regards,
John
Edited by: Matt on Dec 22, 2008 11:18 AM -
Urgent : how to calculate sub total and grand total in smart forms
Hi Friens..how to calculate sub total and grand total in smart forms..How to print them in smart forms...Also kindly explain how to handle events in smart forms..Thanks in advance
Re: Subtotal with Table Node in smartforms
-
Displaying alternate shaded and non shaded lines in smartforms
hi.
I have got a requirement which says we need to display records on smartforms. It should have 50 lines on the page with alternating shaded and non shaded lines. I am using one internal table which contains all the data which is to be displayed. How can I proceed so that even when i have less than 50 records in the internal table it should display all the 50 lines on the form.
thanks in advance
Chetanhi chetan,
<b>1.</b>create a table-->create 2 line types(1 is plain and another one is with shading u cabn give shading by selecting the SHADING and sturation in TABLE TAB of table)...
<b>2.</b>then insert two lines in the MAINAREA of the table by righte clck create table line(for this give line type1), then inset the fields u want . create another table line in the main area but with the line type2.. insetr the the text u want as in first line.
if u run the smartform will get the output with 100 record (supoose u have 50 records) because u r using 2 table lines in the mainarea of the table so each line is printing 2 time one with plain and another is with shaded.
Now we have to avoid this repitation... u have to print the alternate one.... to achive this...
maintain a variable with v_flag type c.
by default v_flag = 'X'.
<b>3.</b>for the firstline in the mainarea of the table <b>CONDITION TA</b>B give the conditon v_flag = 'X'.
for the second gve the condtion v_flag = 'Y'.
now 2 line will trigger if the condition is valid.. our goal is to chage the value in the f_flag alternatively... for this
<b>4.</b> create PROGRAM LINES in the main of the table after the 2 lines..in this chage the value of v_flag. as follows
IF V_FLAG = 'X'.
V_FLAG = 'Y'.
ELSE.
V_FLAG = 'X'.
ENDIF.
now first time plain line will be triggered in the each loop pass and the v_flag value will be chaged in each loop pass so next time shaded line will be triggered. it will be repeated for all the records.
if u run the from now u will get 50 records with alternatinveshaded lines.
i hope the solution is clear.. if not read agin i am sure it works.
do not hesitate to come agiani if u r faciong any problems while implementing this.
Please Close this thread.. when u r problem is solved
Reward if Helpful
Regards
Naresh Reddy K -
How to Increase Line space between two lines in ALV Grid
hi,
I want to increase the line space between any two lines in ALV GRID. Can anybody has solution for this issue.
Regards,
MadanHi Madan
It's not possible
Regards
Gregory -
This is regarding totals and sub totals in sap-scripts
Hi to all...............
1...How to print totals and subtotals in sap-scripts? where we have to code the logic.what sort of logic is needed to print the same?
regards,
swaminath.Hi
HI,
To calculate totals and sub totals in sap scripts you have to use subroutines.
Say if you have to add the unit price (KOMVD-KBERT) then in the main window whereever tat value is picked write this routine
/: DEFINE &TOT_PRICE&
/: PERFORM F_GET_PRICE IN PROGRAM <subroutine prog name> /:USING &KOMVD-KBERT& /:CHANGING &TOT_PRICE& /:ENDPERFORM
Then write the variable where ever you want it to be printed (mostly it will be in footer window)
Then create subroutine pool program and you have to write the code.
FORM F_GET_PRICE tables int_cond structure itcsy
outt_cond structure itcsy. data : value type kbert.
statics value1 type kbert.
Read int_cond table index 1.
value = int_cond-value.
value1 = value1 + value.
Read outt_cond table index 1.
outt_cond-value = value1.
Modify outt_cond index 1.
ENDFORM.
To know more, have a look at this thread ..
Re: SAP Script: Display Total calculated on page 2 in page 1
<b>Reward if usefull</b> -
Break Total and Section Totals
Hi,
I have a webi report which consist of s section and a break. The report also does a sub total by break and then section. At last we also show grand total.
The report has section of fleet center.
The report has break on driver name.
The report is in drill mode and has drop downs on fleet name and driver name.
From the drop down menu when I select a particular driver to view information-- the webi shows :
Totals by that driver ( there is a break on this field)
Totals by that fleet ( there is a section on this field)
and Grand total :
Since I have selected a single driver information to view ---all the three totals comes out to be same .
The requirement is to hide the other two totals when we select a particular driver information from the drop down so that we only show the driver level totals. I am looking out for a way to hide section and grand totals when we select a particular driver .
Thank You,Hi Wavery,
Thank you for your response. I tried with the property when section is empty checkbox. In my case I still have a section value. My section is not empty. Its just that when I select only a particular driver the totaling information is repeated twice once at the break level, section level and grand total.
I am looking at ways to hide the section total and grand total when we select a particular drive from the drop down so that the redundant information is avoided at section and grand total level.
Let me know if there is a way out on this.
Thank you,
boe user. -
Hi,
Can I use a total line in an ALV grid and hide part of the columns, so that only the total line will be presented for some of the columns ?Hi,
Yes u can use a total column in the ALV Grid.
Check the code below:
AT LAST.
WA_ALV_CAT1-FIELDNAME = 'TOTAL'(004).
WA_ALV_CAT1-COL_POS = L_I.
WA_ALV_CAT1-COLTEXT = 'TOTAL'(004).
WA_ALV_CAT1-JUST = C_CENTER. " 'C'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR WA_ALV_CAT1.
ENDAT.
Regards
Kannaiah -
Totals and Sub-Totals in ALV GRID
Could anyone advice, how to display sub-totals and totals in ALV Grid(using FM).
Ex: value1 value2
100 50
200 50
subtotal 300 100
total 400
Thanks in advance...Refer below demo code and see perform Sort_list..
it wil serve ur purpose.
REPORT ZGILL_ALV message-id rp .
type-pools slis.
tables: zgill_main,zgill_details.
data z_fieldcat type slis_t_fieldcat_alv.
data begin of itab occurs 0.
DATA ICON TYPE ICON-ID.
include structure zgill_main.
data salary like zgill_details-salary.
data end of itab.
*data itab1 like table of itab with header line.
data : WA_SORT TYPE SLIS_SORTINFO_ALV,
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
IT_FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
PARAMETERS: p_list radiobutton group A1,
P_GRID RADIOBUTTON GROUP A1.
SELECT-OPTIONS: S_PERNR FOR ZGILL_MAIN-PERNR.
start-of-selection.
perform fill_itab.
perform sort_list.
**************Start of scenario without container******************************************
*********Method 1***********
perform fill_fieldcat. " Manuallly Preparing Fiedl Catalog
*********Method 2***********
*perform fill_fieldcat1 changing z_fieldcat. "Preparing field catalog with merge function
perform display_alv.
*****************end of scenario without container*****************************************
*& Form fill_itab
text
--> p1 text
<-- p2 text
form fill_itab .
*select * from zgill_main up to 20 rows INTO CORRESPONDING FIELDS OF TABLE itab.
*ITAB1[] = ITAB[].
select apernr aname aorg adob b~salary INTO CORRESPONDING FIELDS OF TABLE itab
from zgill_main as a join zgill_details as b on apernr = bpernr
WHERE A~PERNR IN S_PERNR.
LOOP AT ITAB.
IF ITAB-PERNR < 1111.
ITAB-ICON = '@08@'.
ELSEIF ITAB-PERNR > 1111 AND ITAB-PERNR < 11111111.
ITAB-ICON = '@09@'.
ELSEIF ITAB-PERNR GE 11111111.
ITAB-ICON = '@0A@'.
ENDIF.
MODIFY ITAB INDEX SY-TABIX.
ENDLOOP.
endform. " fill_itab
*& Form display_alv
text
--> p1 text
<-- p2 text
form display_alv .
data repid like sy-repid.
REPID = SY-REPID.
WA_LAYOUT-ZEBRA = 'X'.
WA_LAYOUT-WINDOW_TITLEBAR = 'GRID DISPLAY'.
WA_LAYOUT-SUBTOTALS_TEXT = 'SUBTOTAL'.
WA_LAYOUT-TOTALS_TEXT = 'TOTAL'.
IF P_GRID = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = repid
IT_FIELDCAT = IT_FIELDTAB
IT_SORT = IT_SORT
IS_LAYOUT = WA_LAYOUT
TABLES
t_outtab = itab[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF sy-subrc <> 0.
message e016 with 'Error in Display'.
ENDIF.
ELSEIF P_LIST = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = repid
IT_FIELDCAT = IT_FIELDTAB
IT_SORT = IT_SORT
IS_LAYOUT = WA_LAYOUT
TABLES
t_outtab = itab[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF sy-subrc <> 0.
message e016 with 'Error in Display'.
ENDIF.
ENDIF.
endform. " display_alv
*& Form fill_fieldcat1
text
--> p1 text
<-- p2 text
form fill_fieldcat1 changing d_fcat type slis_t_fieldcat_alv.
data repid like sy-repid.
data d_fcat1 type slis_t_fieldcat_alv with header line.
REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = repid
I_INTERNAL_TABNAME = 'ITAB'
I_STRUCTURE_NAME = 'ZGILL_MAIN'
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME =
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = d_fcat[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
IF sy-subrc <> 0.
message e016 with 'Error in preparing fiedl catalog'.
ENDIF.
loop at d_fcat into d_fcat1.
case d_fcat1-fieldname.
when 'NAME'.
d_fcat1-reptext_ddic = 'Emp Name'.
MODIFY D_FCAT FROM D_FCAT1.
WHEN 'PERNR'.
d_fcat1-reptext_ddic = 'Emp Num'.
MODIFY D_FCAT FROM D_FCAT1.
WHEN 'ORG'.
d_fcat1-reptext_ddic = 'Org Unit'.
MODIFY D_FCAT FROM D_FCAT1.
endcase.
clear d_fcat1.
endloop.
endform. " fill_fieldcat1
*& Form sort_list
text
--> p1 text
<-- p2 text
form sort_list .
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'DOB'.
WA_SORT-SPOS = '1'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'NAME'.
WA_SORT-SPOS = '1'.
WA_SORT-UP = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
endform. " sort_list
*& Form fill_fieldcat
text
--> p1 text
<-- p2 text
form fill_fieldcat .
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'ICON'.
WA_FIELDCAT-SELTEXT_L = 'TRAFFIC'.
WA_FIELDCAT-ICON = 'X'.
WA_FIELDCAT-ddictxt = 'l'.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-OUTPUTLEN = 10.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'PERNR'.
WA_FIELDCAT-SELTEXT_L = 'EMP NUMBER'.
WA_FIELDCAT-ddictxt = 'l'.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-OUTPUTLEN = 10.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
when 'maktx'.
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'NAME'.
WA_FIELDCAT-SELTEXT_L = 'EMP NAME'.
WA_FIELDCAT-ddictxt = 'l'.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-OUTPUTLEN = 15.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'ORG'.
WA_FIELDCAT-SELTEXT_L = 'ORG UNIT'.
WA_FIELDCAT-COL_POS = 4.
WA_FIELDCAT-OUTPUTLEN = 10.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'DOB'.
WA_FIELDCAT-SELTEXT_L = 'BIRTH DATE'.
WA_FIELDCAT-COL_POS = 5.
WA_FIELDCAT-OUTPUTLEN = 12.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'SALARY'.
WA_FIELDCAT-SELTEXT_L = 'SALARY'.
WA_FIELDCAT-COL_POS = 6.
WA_FIELDCAT-OUTPUTLEN = 25.
WA_FIELDCAT-do_sum = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
endform. " fill_fieldcat -
Identify selection of sub-total line in ALV grid
Hi folks,
Is there a way to identify in the report if the user has selected any sub-total line in an ALV grid? Both for REUSE_ALV_GRID_DISPLAY and CL_GUI_ALV_GRID.
Thanks
SagarSagar,
1. I don't think its good design, if you want to process those three lines, you should ask the user to select those 3 rows and process them.
2. If you have no choice, tyr these methods, these might give you some info
GET_SORT_CRITERIA
GET_SUBTOTALS
These methods might give you the info you are looking for. Try it out.
regards,
Ravi -
Regarding totals and sub totals text in alv
Hi all,
i am displaying Totals and subtotals ......but i want to display the text before the the Totals and Subtotals.
Please help me in regarding this..
Thanks in advance,
S.Gangi reddy.hi,
check this report.
*& Report ZGM_ALV_SUBTOTAL_TEXT *
*& Author :
*& Date :
*& Description :
*& Modification History
REPORT ZGM_ALV_SUBTOTAL_TEXT .
*& Table declaration
TABLES: ekko.
*& Type pool declaration
TYPE-POOLS: slis. " Type pool for ALV
*& Selection screen
SELECT-OPTIONS: s_ebeln FOR ekko-ebeln.
*& Type declaration
Type declaration for internal table to store EKPO data
TYPES: BEGIN OF x_data,
ebeln TYPE char30, " Document no.
ebelp TYPE ebelp, " Item no
matnr TYPE matnr, " Material no
matnr1 TYPE matnr, " Material no
werks TYPE werks_d, " Plant
werks1 TYPE werks_d, " Plant
ntgew TYPE entge, " Net weight
gewe TYPE egewe, " Unit of weight
END OF x_data.
*& Internal table declaration
DATA:
i_ekpo TYPE STANDARD TABLE OF x_data INITIAL SIZE 0,
Internal table for storing field catalog information
i_fieldcat TYPE slis_t_fieldcat_alv,
Internal table for Top of Page info. in ALV Display
i_alv_top_of_page TYPE slis_t_listheader,
Internal table for ALV Display events
i_events TYPE slis_t_event,
Internal table for storing ALV sort information
i_sort TYPE slis_t_sortinfo_alv,
i_event TYPE slis_t_event.
*& Work area declaration
DATA:
wa_ekko TYPE x_data,
wa_layout TYPE slis_layout_alv,
wa_events TYPE slis_alv_event,
wa_sort TYPE slis_sortinfo_alv.
*& Constant declaration
CONSTANTS:
c_header TYPE char1
VALUE 'H', "Header in ALV
c_item TYPE char1
VALUE 'S'.
*& Start-of-selection event
START-OF-SELECTION.
Select data from ekpo
SELECT ebeln " Doc no
ebelp " Item
matnr " Material
matnr " Material
werks " Plant
werks " Plant
ntgew " Quantity
gewei " Unit
FROM ekpo
INTO TABLE i_ekpo
WHERE ebeln IN s_ebeln
AND ntgew NE '0.00'. IF sy-subrc = 0.
SORT i_ekpo BY ebeln ebelp matnr .
ENDIF.
To build the Page header
PERFORM sub_build_header. "* To prepare field catalog
PERFORM sub_field_catalog. "* Perform to populate the layout structure
PERFORM sub_populate_layout."* Perform to populate the sort table.
PERFORM sub_populate_sort."* Perform to populate ALV event
PERFORM sub_get_event.
END-OF-SELECTION.
* Perform to display ALV report
PERFORM sub_alv_report_display.
*& Form sub_build_header
To build the header
No Parameter
FORM sub_build_header .
Local data declaration
DATA: l_system TYPE char10 , "System id
l_r_line TYPE slis_listheader, "Hold list header
l_date TYPE char10, "Date
l_time TYPE char10, "Time
l_success_records TYPE i, "No of success records
l_title(300) TYPE c. " Title
Title Display
l_r_line-typ = c_header. " header
l_title = 'Test report'(001).
l_r_line-info = l_title.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR l_r_line.
* Run date Display
CLEAR l_date.
l_r_line-typ = c_item. " Item
WRITE: sy-datum TO l_date MM/DD/YYYY.
l_r_line-key = 'Run Date :'(002).
l_r_line-info = l_date.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR: l_r_line,
l_date.ENDFORM. " sub_build_header
*& Form sub_field_catalog
Build Field Catalog
No Parameter
FORM sub_field_catalog .
Build Field Catalog
PERFORM sub_fill_alv_field_catalog USING: '01' '01' 'EBELN'
'I_EKPO' 'L'
'Doc No'(003) ' ' ' ' ' ' ' ', '01' '02' 'EBELP' 'I_EKPO' 'L'
'Item No'(004) 'X' 'X' ' ' ' ', '01' '03' 'MATNR' 'I_EKPO' 'L'
'Material No'(005) 'X' 'X' ' ' ' ', '01' '03' 'MATNR1' 'I_EKPO'
'L'
'Material No'(005) ' ' ' ' ' ' ' ',
'01' '04' 'WERKS' 'I_EKPO' 'L'
'Plant'(006) 'X' 'X' ' ' ' ', '01' '04' 'WERKS1' 'I_EKPO' 'L'
'Plant'(006) ' ' ' ' ' ' ' ', '01' '05' 'NTGEW' 'I_EKPO' 'R'
'Net Weight'(007) ' ' ' ' 'GEWE' 'I_EKPO'.ENDFORM.
" sub_field_catalog*&----
*& Form sub_fill_alv_field_catalog
*& For building Field Catalog
*& p_rowpos Row position
*& p_colpos Col position
*& p_fldnam Fldname
*& p_tabnam Tabname
*& p_justif Justification
*& p_seltext Seltext
*& p_out no out
*& p_tech Technical field
*& p_qfield Quantity field
*& p_qtab Quantity table
FORM sub_fill_alv_field_catalog USING p_rowpos TYPE sycurow
p_colpos TYPE sycucol
p_fldnam TYPE fieldname
p_tabnam TYPE tabname
p_justif TYPE char1
p_seltext TYPE dd03p-scrtext_l
p_out TYPE char1
p_tech TYPE char1
p_qfield TYPE slis_fieldname
p_qtab TYPE slis_tabname.
Local declaration for field
catalog
DATA: wa_lfl_fcat TYPE slis_fieldcat_alv.
wa_lfl_fcat-row_pos = p_rowpos. "Row
wa_lfl_fcat-col_pos = p_colpos. "Column
wa_lfl_fcat-fieldname = p_fldnam. "Field Name
wa_lfl_fcat-tabname = p_tabnam. "Internal Table Name
wa_lfl_fcat-just = p_justif. "Screen Justified
wa_lfl_fcat-seltext_l = p_seltext. "Field Text
wa_lfl_fcat-no_out = p_out. "No output
wa_lfl_fcat-tech = p_tech. "Technical field
wa_lfl_fcat-qfieldname = p_qfield. "Quantity unit
wa_lfl_fcat-qtabname = p_qtab .
"Quantity table
IF p_fldnam = 'NTGEW'.
wa_lfl_fcat-do_sum = 'X'.
ENDIF.
APPEND wa_lfl_fcat TO i_fieldcat.
CLEAR wa_lfl_fcat.
ENDFORM.
" sub_fill_alv_field_catalog*&----
*& Form sub_populate_layout
Populate ALV layout
No Parameter
FORM sub_populate_layout . CLEAR wa_layout.
wa_layout-colwidth_optimize = 'X'.
" Optimization of Col width
ENDFORM. " sub_populate_layout*&----
*& Form sub_populate_sort
Populate ALV sort table
No Parameter
FORM sub_populate_sort .
Sort on material
wa_sort-spos = '01' .
wa_sort-fieldname = 'MATNR'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
Sort on plant
wa_sort-spos = '02'.
wa_sort-fieldname = 'WERKS'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
ENDFORM.
" sub_populate_sort*&----
*& Form sub_get_event
Get ALV grid event and pass the form name to subtotal_text
event
No Parameter
FORM sub_get_event .
CONSTANTS : c_formname_subtotal_text TYPE slis_formname VALUE
'SUBTOTAL_TEXT'. DATA: l_s_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 4
IMPORTING
et_events = i_event
EXCEPTIONS
list_type_wrong = 0
OTHERS = 0.
Subtotal
READ TABLE i_event INTO l_s_event
WITH KEY name = slis_ev_subtotal_text.
IF sy-subrc = 0.
MOVE c_formname_subtotal_text TO l_s_event-form.
MODIFY i_event FROM l_s_event INDEX sy-tabix.
ENDIF.ENDFORM.
" sub_get_event*&----
*& Form sub_alv_report_display
For ALV Report Display
No Parameter
FORM sub_alv_report_display .
DATA: l_repid TYPE syrepid .
l_repid = sy-repid .
This function module for displaying the ALV
report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = l_repid
i_callback_top_of_page = 'SUB_ALV_TOP_OF_PAGE'
is_layout = wa_layout
it_fieldcat = i_fieldcat
it_sort = i_sort
it_events = i_event
i_default = 'X'
i_save = 'A'
TABLES
t_outtab = i_ekpo
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE i000 WITH 'Error in ALV report display'(055).
ENDIF.
ENDFORM.
" sub_alv_report_display*&----
FORM sub_alv_top_of_page
Call ALV top of page
No parameter
FORM sub_alv_top_of_page. "#EC CALLED*
*To write header for the ALV
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_alv_top_of_page.
ENDFORM.
"alv_top_of_page*&----
*& Form subtotal_text
Build subtotal text
P_total Total
p_subtot_text Subtotal text info
FORM subtotal_text CHANGING
p_total TYPE any
p_subtot_text TYPE slis_subtot_text.
Material level sub total
IF p_subtot_text-criteria = 'MATNR'.
p_subtot_text-display_text_for_subtotal
= 'Material level total'(009).
ENDIF.
Plant level sub total
IF p_subtot_text-criteria = 'WERKS'.
p_subtot_text-display_text_for_subtotal = 'Plant level total'(010).
ENDIF.
ENDFORM. "subtotal_textSelection screen:
\[removed by moderator\]
Edited by: Jan Stallkamp on Sep 3, 2008 6:17 PM
Maybe you are looking for
-
ICal won't sync from Mac to iPhone
iCal wont sync from Mac to iPhone
-
Bug When Converting (Back) To Local User Account
I am using Windows 8.1 Pro and began by setting up a local user account, which is the Administrator account. I then successfully switched the account to a Microsoft account, with the same user name. As a test, I then decided to switch back to a local
-
10.4.6 to 10.4.8 problem
During auto update or manual updates, when I get to "select a destination", I get this message "You cannot install mac os x Update on this volume this volume does not meet the requirements for this update" Comments or suggestions appreciated
-
Convert Web Application onto Adobe AIR
hi friends, I do have an adobe flex 3.0 application running on web..I want to convert the whole application on adobe air... I have done googling but doesnt end up with some solution.... does anyone know how to come our from this...???
-
Instale photoshop cs en mi equipo (Pentium 4, 80GB de disco, 256 de memoria, Windows XP). Pero cuando instalé el programa , me abrió una ventanita con esta advertencia: "La memoria virtual primaria del Photoshop y el archivo primario Windows en el mi