Total application memory increase?
About 2 months ago I purchased a 32gb memory card for my blackberry 8330 smartphone. Is there any way I can possibly increase the total application memory of my device? (Please forgive me if this is a stupid question as I am new to this whole smart phone universe.)
No.
The media card will be of use for media, i.e., music, videos, pictures and documents. You can't increase the device memory.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Can I increase application memory in finder
I get a message saying I am running out of application memory.
With OS9, I could increase the allocated memory in finder. Can I do this in 10.5.8?No. Mac OS X's RAM allocation is handled by the system automatically. If there's only a little free space on the internal drive, delete or move files as needed.
(64166) -
How do you increase an applications memory
Getting a memory error code from Outlook 108 so how do I increase the applications memory?
i googled your error and came up with a MS office thread that pointed to this
http://www.office.mvps.org/error/number.html#error-108
you've probably got an email with a bad header or some other such fun. if you have webmail access for your account, you can login there and try to delete the message.
-mvimp -
Memory applications HDD increased to 718 GB after the installation yosemity.
After the installation of yosemity, memory applications HDD increased to 718 GB, increasing every other day 2 GB.
Re-index Macintosh HD.
Do this twice.
Spotlight reindexing will take a while to finish.
System Preferences > Spotlight > Privacy
http://support.apple.com/kb/ht2409
You will see a new category “Other” in the Storage Display.
About “Other”:
http://support.apple.com/en-us/HT202867 -
New iMac27" OS 10.9.4 runs out of application memory
I have a brand new iMac 27" with 1TB Flash drive, 16GB RAM, i7 processor 3.5Ghz
Although I only migrated the data files from an older iMac running Lion OS, I installed only a few apps fresh on the systems:MS office 2011, Skype, Chrome, Teamviewer and Firefox.
It was running for several days with only Mail and Safari open.
Time Machine was on for backup.
Suddenly it gave an error that application memory was full and the computer needed to restart.
This is odd.
Etrecheck report:
EtreCheck version: 1.9.12 (48)
Report generated August 6, 2014 at 11:07:07 AM PDT
Hardware Information:
iMac (27-inch, Late 2013) (Verified)
iMac - model: iMac14,2
1 3.5 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information:
NVIDIA GeForce GTX 775M - VRAM: 2048 MB
iMac 2560 x 1440
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 0:37:1
Disk Information:
APPLE SSD SM1024F disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 999.7 GB (726.5 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. MacBook Air SuperDrive
FireWire Information:
OWC Mercury Elite-AL Pro unknown_device 400mbit - 400mbit max
EFI (disk1s1) <not mounted>: 209.7 MB
OWC Mercury Elite AL Pro (disk1s2) /Volumes/OWC Mercury Elite AL Pro: 999.86 GB (191.06 GB free)
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt to FireWire Adapter
Gatekeeper:
Mac App Store and identified developers
Launch Daemons:
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.teamviewer.Helper.plist Support
[running] com.teamviewer.teamviewer_service.plist Support
Launch Agents:
[running] com.teamviewer.teamviewer.plist Support
[running] com.teamviewer.teamviewer_desktop.plist Support
User Launch Agents:
[loaded] com.google.keystone.agent.plist Support
User Login Items:
Microsoft AU Daemon
Mail
Internet Plug-ins:
Default Browser: Version: 537 - SDK 10.9
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.1.0 Support
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
WebEx: Version: 1.0 Support
3rd Party Preference Panes:
None
Time Machine:
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 931.04 GB Disk used: 254.43 GB
Destinations:
OWC Mercury Elite AL Pro [Local] (Last used)
Total size: 931.19 GB
Total number of backups: 30
Oldest backup: 2014-08-01 03:42:38 +0000
Last backup: 2014-08-06 17:22:42 +0000
Size of backup disk: Adequate
Backup size 931.19 GB > (Disk used 254.43 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
53% TeamViewer_Desktop
11% WindowServer
1% TeamViewer_Service
1% fontd
0% coreservicesd
Top Processes by Memory:
573 MB Mail
324 MB TeamViewer_Desktop
197 MB WindowServer
164 MB mds_stores
115 MB com.apple.IconServicesAgent
Virtual Memory Information:
11.49 GB Free RAM
2.21 GB Active RAM
923 MB Inactive RAM
1.39 GB Wired RAM
1.49 GB Page-ins
0 B Page-outs
Seems odd that a brand new computer less than a week old would give this error. Any suggestions?There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
Why is my iMac telling me that I'm out of application memory when I have 8GB of RAM installed?
There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
Application Memory Full - how do I stop this?
Running LabView 3.1 on a 386 machine. After several minutes of running get the following: "Application Memory Full: Saving and closing VIs can free memory. You may need to increase the Total Memory allocated to LabView from the Preferences Dialog." I gave it the entire 32 meg and still the same. What to look into? remeber it's an ancient 386!
tks
Randy BatesShift registers accumulating data with Build Array or Append String functions inside!
Bad calculation of For loop count with autoindexing output on foor loop boundery.
Or simply an autoindexing output on a while loop. The CPU may be slow but 32 MB is fast depleted in a loop when you create an array of double precision values.
PS: You should have also a math coprocessor 387 installed or things get a little difficult in LabVIEW.
Rolf K
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
How do i resolve an issue where i have run out of application memory?
My imac says i have run out of application memory and that i should quit applications. How do i resolve this issue?
The message has nothing to do with low disk space.
There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
Yosemite - says "not enough application memory - and closes all open applications
Since the day I installed Yosemite I have had problems. First, some other file was downloaded when I did the Yosemite install which crashed the computer. It had to go in for repair. Once that was remedied, I frequently get an error message "Not enough
application Memory and it starts automatically shutting down all of my programs. Normally, first to go is Mail, then Google (Safari would not work with Maverick - it would freeze) then Photoshop and whatever else is open. I did not have this problem with Maverick. This is a pain!
I am working on a 2009 Mac Pro with 24 MB Ram.
Any ideas about what is going on and how to remedy it. I would appreciate it. ThanksThere is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
Hi everyone,
I'm running a late-2012 27 inch iMac - 3.4GHz Intel Core i7, 32GB 1600 MHz DDR3 with the 3TB fusion drive, OS 10.8.4. At present there is 1.92TB of available storage.
I have received this message "Your Mac OSX startup disk has no more space available for application memory" just before a full on crash multiple times in the past couple of days whilst using WeTransfer to send over some large files (500MB+). The applications I have had open at the time have been: Activity Monitor, App Store, Firefox, and Finder. Over the course of uploading the files, the active system memory has gone from 1.04GB and steadily increased until it more or less maxes out around 29GB, at which point the Page Outs rocket up to around 40GB/s and the swap memory fills up pretty quickly until the computer basically can't take any more and blacks out.
This is a pretty new thing, haven't really had an issues before. My main software used: Sibelius 7 & Logic Pro X. I've also recently started working with Final Cut Pro X, which seems to have been struggling at points. I've tried closing everything, restarting the computer and not opening anything (specifically NOT FCPX) before attempting an upload. I've even gone so far as to remove FCPX from my system, and yet the problem is still recurring. Both "kernal_task" and "WindowServer" have been running high on CPU when these problems have occurred.
Does anyone know what might be the issue and how it could possibly be resolved?
Really appreciate any help, I'm in the middle of a fairly sizeable project and the deadlines are just around the corner.
Thanks,
TomThere is excessive swapping of data between physical memory and virtual memory. That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
When I open my iMac, I get the following message : Your Mac OS X startup disk has no more space available for application memory. Then it says to quit applications not in usw and to close windows and remove files from startup disk. It lists Safari, email and Finder. I force a quit on all applications yet the same message comes up every time I open an application. What do I do to get rid of this once and for all? The computer is not even two years old and is only used for email and Safari. Help will be greatly appreciated,
The message has nothing to do with low disk space.
There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
Recent "out of application memory" dialog popup
Hello-
Within the last few days, I am receiving a message "Your system has run out of application memory." I've not changed anything and am not running more than iTunes, Safari, Mail and Marketcircle Daylite. The same programs I've run for years. Any ideas as whee to look/fix?There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Please note that if the cause is a memory leak, installing more memory will not help. That's likely if you already have more than 4 GB of memory. Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, reset the printing system. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
Says I'm out of Application memory
Error Message: Your system has run out of application memory. How do I fix this?
The message has nothing to do with low disk space.
There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
Your system run out of application memory
your system run out of application memory i get this message pop up and everything freezes
There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
I'm getting the message that my MacBook Pro has run out of application memory?
If I'm not paying attention and am running more then 1 application at the same time I get a message that I've run out of application memory and need to "force quit" current applications in order to continue. Anything I can do to resolve this problem like add more RAM/
First, all so-called "memory cleaning" software is worse than useless.
There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Please note that if the cause is a memory leak, installing more memory will not help. That's likely if you already have more than 4 GB of memory. Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, reset the printing system. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.
Maybe you are looking for
-
I want to know in which tables the data is saved when saving the expected receipts form. Navigation: Inventory:Transactions:Transaction Open Interface
-
Hi All, I have multiple APP Modules whcih points to different databases. I have one operation whcih writes data in two databases and commit should occur only if both transactions succeed. I think I should do this by using the commit and rollback oper
-
Illustrator CC Runs Poorly on Fast Windows 8.1 Machine (Laggy Movement etc)
Illustrator CC runs very sluggishly on my Windows 8.1 machine. Computer specs: i7 3770k 32GB Ram Installed on Samsung EVO SSD GTX 780 ACX graphics card It feels like at the very core of the program it is simply poorly optimized. I can draw a shape as
-
I just bought an iphone 4 about 2 weeks ago. the facebook application and safari run slow. I've deleted facebook and downloaded it again. Its a brand new phone so i'm not sure if i have the settings wrong or if theres something wrong with the phone?
-
Cannot find "Structure" menu under the Insert tab. Need it to insert a header
I just downloaded a trial version of DW CS6 and am following the on-line tutorial, but cannot find the "Structure" option under the "Insert" tab when creating an HTML document. Where di it go?