Total in BPS Layout

Hi All,
I want to add a line for total in a BPS layout.
In BPS0 transaction, there is a button that allowed to add line for total in the Excel sheet. The problem is that line don't appear in the layout of the campaign in CRM.
Could you please help me ?
Thank you in adavance
Regards

Hi Ivan,
yes.
You also might consider to use BW-IP where you have the full reporting and planning
features integrated in BW queries. There it would even be possible to make 'AVERAGE'
an input ready formula (BW 7.01, SP05 or higher):
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/49/db8d1bc2245d5de10000000a421937/frameset.htm
Regards,
Gregor

Similar Messages

How to Remove totals on few columns from SEM BPS layout

On SEM BPS layout it has 10 5 charatestics columns
and 10 key figure columns.
out of these key figures I want see totals on some
coulmns and for few columns I do not want to see totals.
for wxample it does not make sense of seeing total under
the salary incrase percentage coulmn.
Please suggest anyway we can remove total for some
columns on the layout

Hey, thanks -- everything worked as you described. It never would have occurred to me that the "put back" button refers to the browser selection not the layout selection, for reasons I give below.
I think Aperture exhibits some conceptual confusion here. First of all, a "light table" is created by the New > Light Table command, and you add images to the newly created light table just as you would add them to an album. But those images don't go on the light table layout until you drag them from the browser to the layout table. The "put back" button and "remove from light table" contextual menu command both mean remove from the layout. The phrasing of the contextual menu command make it sounds as if it will remove the clicked image from the light table's collection of images, like removing an image from an album -- it would have made more sense to name this command "put back". Furthermore, the "put back" button is above the layout display, not above the browser, which to me implies that it applies to selections in the layout display. To select an image in the browser, and click "put back selected" seems backwards -- if you just selected the image in the browser, your attention is focused on the browser, not the layout; from the browser's point of view, the button should read "bring back" not "put back".
The documentation didn't really help when I was trying to figure this out. Sometimes the Aperture documentation refers to just a "light table", as on the overview on page 732. On pages 733 and 734, though, it refers to a "light table album". On page 735 of the Aperture manual there is a very brief explanation of how "to add images to the light table" and "to remove an image from the light table". Here, "light table" refers to the layout not the album. The explanation of the "Put Back Selected" button says to select an image then click the button, and the picture shown is of an image selected in the layout, not in the browser.

Variable Range not working in BPS-Layout.

Hi BI Guru's,
I am facing Problem in BPS - Layout.
My requirement is to get YTD Budget Quantity in Single Coulumn. For Example, I need Quantiy for the Period 001.2009 to 12.2009 in single Column as Budget YTD 2009.
For this I defined a variable on the Planning area, with the characteristics "fiscper" and in the selection condition i entered the range 001.2009 to 012.2009, but when i executed the layout it is showing the quantity for the perios 001.2009 only and not for the entire range.
I tried with the User Exit also, where i copied the standard function module "UPF_VARIABLE_USER_EXIT" to 'Z' function and modified to my requirement.
Following is my Code for the Function Module
clear eto_charsel.
data ls_charsel type upc_ys_charsel.
clear ls_charsel.
i_area = 'ZUCOPA'.
I_CHANM = 'FISCPER'.
i_variable = 'ZACTDYTD1'.
ls_charsel-chanm = i_chanm.
ls_charsel-seqno = '1'.
ls_charsel-sign = 'I'.
ls_charsel-opt   = 'BT'.
ls_charsel-low   = '2009001'.
ls_charsel-HIGH   = '2009012'.
insert ls_charsel into table eto_charsel.
But the after using the Function Module in the User Exit area of Variable also, I am getting the Quantity for the Period 001.2009 only and not for the entire range ( 001.2009 to 012.2009 ).
Please suggest some solution ASAP.
Thanks in advance.
Regards,
VD.

Hi Marc,
Thanks For your Reply,
I changed the Layout as suggested by you, where i have now 12 columns for Budget Quantity and a Total column( C1C2....C12).
I do not want to show this 12 column and instead want to show only the total column, so I hide this columnn's in the change layout but after saving the layout these columns again appear in the layout.
How do i hide these columns in the layout????
Thanks
VD

Hierarchies in excel BPS Layout

Hi All,
I have created Cost Element hierarchies in RSH1 ,
Permanenet Salaries(Text Node)
1000 (Cost ELements)
2000
3000
Sub total
Training(Text Nodes)
1100(Cost ELements)
1200
1300
Sub total
In selection tab of Planning area i have assigned my hieararchy, and in BPS layout i have selected the option with hierarchies, but when i execute the hierarchy in excel layout , It displaying in single structure, its not breaking up individualy, and also i need subtotals at the end of the every text nodes.
Any clues will be much appreciated.
Thanks
Imran

Hi
To solve your problem check this doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9b39e690-0201-0010-748d-cc62c5ecbb49
Hope it helps

CRM fields not populating in BPS layout for opportunity Planning 0crm_order

Hello Support,
We are using SAP CRM 5.0 SP09 with BW 7.0 SP 09.
When creating an opportunity in CRM, the product data ( quantity ,
values) are not appearing in Planning tab( SEM-BPS Layout) .
Kindly let us know what needs to be done to resolve this issue.
Thanks and regards,
Rajiv Jain

In your CRM system, check your mapping from CRM to BW are correct.
You can do this in transaction SPRO. Menu path 'SAP Implementation Guide --> Integration with other mySAP components --> SEM --> Change mapping between CRM fields and InfoObjects'. Select planning application 'OPP' and click on 'Mapping table - system entries' on the left.
In here you should see the mapping from the InfoObject to the CRM field (eg. Infoobject 0CRM_EXPREV uses structure CRM_BW_OPPT_H and field name EXP_REVENUE).
In order for the value to be passed to planning you must tick the 'Empty' checkbox on.
Regards,
Adrian

Navigate from WebDynpro Application to BPS Layout and vice versa

Hi,
Please see the following Problem Statement:
We have WebDynpro applications and BPS applications in our project. All the applications are published via SAP Portal. Both areas (WebDynpro and BPS) have same selection screen (Selection fields are common). Is it possible to call
WebDynpro application from BPS layout (on click of button)and also passing the selection parameters to the WebDynpro application and vice-versa.
- Sujal Shah

Hi,
You can you free tool from Oracle called OMWB (Oracle Migration Workbench) for SQL Server to Oracle.
For more details, visit http://www.oracle.com/technology//tech/migration/workbench/index.html
From Oracle to SQL Server, there are third party tools available.
Cheers,
Harshw
Message was edited by:
[email protected]

BW authorizations in BPS layout

Dear all,
My question may seem basic, but I don't have any experience with authorizations.
I need to use already existing BW authorizations in my BPS layouts, so well, I created auth. variables on the needed characteristics and assigned it to my layout.
==> nothing changes when I'm launching the layout.
I wonder if I need to ask the modification of the already existing BW roles in order to add field ACTVT? Will this have an impact on already existing BW reports for the users?
Also, does something need to be done in RSSM (or other T-code) in order to activate the auth. for my planning cubes?
Thank you in advance for your help!!

Ravi,
The objects you mentionned talk about area, planning, etc,... so they are usefull when a user wants to launch a layout in order to let him launch/plan it or not, etc... . That's the first step, and that doesn't interest me.
Second step is that when launching, the user will get his layout. This layout will be generated regarding the design I made in BPS0 and then also the variables I've used.
If I've restricted my planning level by using variables of type authorization on an char. that is in the lead column of my planning layout, it should restrict the diplayed/available rows regarding that authorization (ex : only company code 1000 for user A; company code 2000 for user B ; company code 1000 and 2000 for user C ==> coming from reporting authorizations in BW)
So I really think we don't speak about the same thing... or it's me that doesn't understand! (that's also possible )

Printing Document and Comments of a BPS layout

Do you know how i can take print out of all the comments that i have in a BPS layout. Where does all these comments and documents are stored and how can i retrieve them. If it is same a Documents tab under BW, how can i get those documents for a particular layout, as i do not see the options of a Layout except to go with Queries and Info Cube.
What is the alternative solution to achieve this. All my Users want to see the comments of other users and then plan on it..
Thanks and appreciate your ideas.
Veeru

Hi Marc,
I have a requirement to print the comments entered in the planning layout to be printed in a Bex Web report.
I implemented your 'How To' paper but I still have to produce a web report to show all the comments from the planning layout.
I found on the forum about reading the DMS through a FM and writing into a table and uploading into a cube as a charcteristic.
Are there any better alternatives?
Thanks,
Jay

Loading data from excel to BPS layout

Hi,
I have BPS layouts in place and also excel sheets which are exact replica of those layouts.
I know 2 options to load excel data into the BPS. These are:
1) Copy and paste the data from excel to BPS layout.
2) Create a flat file in line format from excel and then use method explained in document "How to Load a Flat File into BW-BPS Using SAPGUI.pdf".
Is there any other way I can upload the same?
Any help in this regard will be highly appreciated.
thanks in advance.
regards,
Pankaj

Thanks to Vlad, Laurent & Srini for prompt replies.
But here the user needs to load data directly to the transactional cube.
So it is a case of "instead of keying in values" on to the BPS planning layout, user wants to upload the data from excel into the BPS layout.
Planning is done on SAP GUI and not web browser.
I am able to do the same using the document "How to Load a Flat File into BW-BPS Using SAPGUI".
But in this case the data needs to be converted into a simple csv file in line item format before it can be uploaded.
Is there any way, where we can upload from excel file without having it to change to csv format as required in "How to Load a Flat File into BW-BPS Using SAPGUI"?
thanks in advance.
regards,
Pankaj

Change Data in BPS Layout: Exit Function

Hello everyone,
We are using BW-BPS and we need to make a sort of a certain characteristic in a Planning Folder. In the specific Planning Folder it was defined an exit function and it was assigned a function module.
We implement the following code:
FUNCTION Z_ORDENAR_CLASSIFICACAO_PLANO.
""Interface local:
*" IMPORTING
*"     REFERENCE(I_AREA) TYPE UPC_Y_AREA
*"     REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
*"     REFERENCE(I_METHOD) TYPE UPC_Y_METHOD
*"     REFERENCE(I_PARAM) TYPE UPC_Y_PARAM
*"     REFERENCE(I_PACKAGE) TYPE UPC_Y_PACKAGE
*"     REFERENCE(IT_EXITP) TYPE UPF_YT_EXITP
*"     REFERENCE(ITO_CHASEL) TYPE UPC_YTO_CHASEL
*"     REFERENCE(ITO_CHA) TYPE UPC_YTO_CHA
*"     REFERENCE(ITO_KYF) TYPE UPC_YTO_KYF
*" EXPORTING
*"     REFERENCE(ET_MESG) TYPE UPC_YT_MESG
*" CHANGING
*"     REFERENCE(XTH_DATA) TYPE HASHED TABLE
DATA:
    lr_area TYPE REF TO cl_sem_planarea_attributes,
    wa_hash_table type ref to data,
    l_sortfield type STRING,
    lr_t_data TYPE REF TO data.
FIELD-SYMBOLS:
    <lt_data> TYPE STANDARD TABLE,
    <ht_head> TYPE ANY TABLE,
    <xth_data> TYPE HASHED TABLE,
    <ls_data> TYPE ANY,
    <wa_data> TYPE ANY,
    <fundo> TYPE ANY,
    <eco> TYPE ANY.
CALL METHOD cl_sem_planarea_attributes=>get_instance
    EXPORTING
      i_area = i_area
    RECEIVING
      er_instance = lr_area.
CREATE DATA wa_hash_table LIKE LINE OF xth_data.
ASSIGN wa_hash_table->* TO <ht_head>.
<ht_head> = xth_data.
LOOP AT <ht_head> ASSIGNING <ls_data>.
This is the characteristic that we pretend to sort
    l_sortfield = 'S_CHAS-0CMMT_ITEM'.
    SORT <ht_head>
      BY (l_sortfield) DESCENDING.
ENDLOOP.
<xth_data> = <ht_head>.
UNASSIGN: <ls_data>, <ht_head>.
ENDFUNCTION.
When execute this function, we get a DUMP (ASSIGN_TYPE_CONFLICT). Does anybody have any suggestion how to change a hash table or somehow make a sort in this hash table?
Thanks in advance.
Ilda

Hi,
After some changes in the code, it seems that xth_data table is assuming the new content. In debugging, we could see that the assignment was made and xth_data records are now in a different order. But when executing the BPS Layout assigned to this planning function, all the lines (records) still in the same place. The Layout doesnt change.
This is the code:
FUNCTION Z_ORDENAR_CLASSIFICACAO_PLANO.
""Interface local:
*" IMPORTING
*"     REFERENCE(I_AREA) TYPE UPC_Y_AREA
*"     REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
*"     REFERENCE(I_METHOD) TYPE UPC_Y_METHOD
*"     REFERENCE(I_PARAM) TYPE UPC_Y_PARAM
*"     REFERENCE(I_PACKAGE) TYPE UPC_Y_PACKAGE
*"     REFERENCE(IT_EXITP) TYPE UPF_YT_EXITP
*"     REFERENCE(ITO_CHASEL) TYPE UPC_YTO_CHASEL
*"     REFERENCE(ITO_CHA) TYPE UPC_YTO_CHA
*"     REFERENCE(ITO_KYF) TYPE UPC_YTO_KYF
*" EXPORTING
*"     REFERENCE(ET_MESG) TYPE UPC_YT_MESG
*" CHANGING
*"     REFERENCE(XTH_DATA) TYPE HASHED TABLE
DATA:
lr_area TYPE REF TO cl_sem_planarea_attributes,
l_sortfield type STRING,
data_ref TYPE REF TO data,
lr_t_data TYPE REF TO data.
FIELD-SYMBOLS:
<lt_data> TYPE ANY TABLE,
<ls_data> TYPE ANY,
<ls_data_copy> TYPE ANY.
CALL METHOD cl_sem_planarea_attributes=>get_instance
    EXPORTING
      i_area      = i_area
    RECEIVING
      er_instance = lr_area.
CREATE DATA lr_t_data TYPE (lr_area->typename_t_data).
ASSIGN lr_t_data->* TO <lt_data>.
<lt_data> = xth_data.
CLEAR xth_data.
l_sortfield = 'S_CHAS-0CMMT_ITEM'.
SORT <lt_data> BY (l_sortfield) DESCENDING.
MOVE <lt_data> TO xth_data.
ENDFUNCTION.
Does anybody understand this behavior, why the changes in the user-exit are not assumed in the BPS Layout?
Thanks,
Ilda

Data columns in BPS layout

Hi,
My current BPS layout has three columns, they are cost,price and margin respectively. The user now ask to add another column call "alert" after the margin column.
The logic is that if the margin is less than 10%, then the alert column should marked with "X", otherwise leave it blank.
In order to add a column after margin column, the added column have to be key figure which will not allowed characteristics,while all the other key figure type such as amount, quantity, date ect will not take
"X".
Any idea or suggestion.

JW,
If Margin is the last column on your layout, what you do is in the last layout definition screen, add the locl excel formula to the column after where the margin would appear. Then you just use simple excel formula to do it.
For things to appear only if there is data in the row, I typically use an IF in the excel formula and check for values in cost, price, margin. Actually it would be 2 nested IFs. One to check for value and the other to determine the 10% and mark it with a X... In purely excel formula, there is no distinction between key figures and characteristics since it is only Excel.
Hope this helps.

Check user manual input in excel BPS layouts

I have some problems for manual input characteristics checks on an excel bps layout.
I need to assign the value of an header characteristic to a detaild characteristic. How can I do ? I have already tried with characteristic rels. (exit, attributes, etc.) but without results.
Thanks in advance.

Hi Mario,
I am quite sure, that if a char is in an P.Level, and there is a char relationship for it, the char relationship will not be called (somebody correct me if am wrong).
So, in your case, you want to derive SALES ORG from Company code using char rel. The sales org is in the p.level, since it is in your layout. Threfore the char rel will be not called.
If you want to have it works, do not select sales org in your level. I assume that you filter your comp code in level with a bps variable. Get this variable value (using API_SEMBPS_VARIABLE_GETDETAIL function) and assign it to char SAles org in your char rel exit. Everytimes when you save your plan data, the char rel exit will be call and sales org will be derived.
If you want to show and derive the sales org in your layout based on selected company code, create a bps variable type exit for it, and read and derive the value from comp code variable.
Best Regards,
Suan Liono

Is it possible Hide a column in BPS layout "WEB" ?

Hi,
Is it possible to hide a column in a "WEB" BPS layout ?
Have you an example to hide a column in web thanks to Java and where insert it ?

Alessandro,
I create in BPS0 all the customizing I need (functions, layout...). After that, I create a web interface with these components (variables, functions, layout).
That 's why I wonder what could be the java code to hide a column in web interface.
regards

Hide a column in BPS layout ?

Hi,
Is it possible to hide a column in a BPS layout (Web Excel) ?
When I hide a column in the layout definition, saving it resets the hidden column.
Any idea if it will be included in a future release ?
Thanks

Alessandro,
I create in BPS0 all the customizing I need (functions, layout...). After that, I create a web interface with these components (variables, functions, layout).
That 's why I wonder what could be the java code to hide a column in web interface.
regards

Upload a flat file to BPS layout with hierarchy: is it possible?

Hello, BPS people!
I used a known "HowTo...using SAPGUI" to load a flat file to BPS layout. Finally I need to use a predefined layout with several variables and hierarchical representation of characteristic values in the key field ( I can't use a special layout for file uploading!). The procedure works fine if I use a flat structure of characteristic in the key field (no hierarchy). But once I choose a hierarchical representation of key characteristic in the level (but nonhierarchical model in the first screen of layout builder!) the layout data after uploading is absolutely wrong!
1) whether is it possible to perform that without ABAP coding?
2) If not, how can I change the function modules to use hierarchy?
Thank you!
Yurij

Sorry again!
I have solved it.
Probably nobody understood my question. First, I have tried to attach file upload function (see "How To..load a flat file into BW-BPS using SAPGUI") to the same planning level where original planning layout with hierarchical structure in the key field already existed. But now I realized that it's impossible!
SOLUTION: It is necessary to build the file upload function at the separated planning level with the same structure as that in the uploaded file. No hierarchies allowed in the "Selection" tab of planning level !!
Such upload function operates perfectly in the planning folder where original layout with the hierarchical structure of key characteristic is presented. After the file upload you can perform all further activities in the planning folder (including that with uploaded data).
Thanks,
Yurij

Total in BPS Layout

Similar Messages

Maybe you are looking for