Total Neophyte needs Mouse help

Hi all -
As the title states, I'm a total neophyte here. I want to learn Solaris, so I installed a fresh copy.
The problem is that Solaris will not recognize my mouse . . . at all. I have a wireless keyboard/mouse combo (running through one USB cable obviously). After reading online for some time, I was able to come up with two possible solutions:
kdmconfig -t results in telling me my mouse is recognized, but when the test begins, total and complete hell breaks loose (multiple fatal errors)
I also tried cfgadm, which tells me there is one USB connection, which works (makes sense).
Please help. It is frustrating to want to learn, but not even be able to get started.

My advice would be
1. Read the manual. don't worry yet that it doesn't make a whole lot of sense.
2. Religiously do the tutorial.
3. Read the manual again. It will make much more sense this time. don't skip anything.
4. give yourself a little project WITH A DEADLINE. There's nothing like a deadline to keep you sharp.
You're staring at a steep learning curve. If you spook now, you're lost, and might as well pack the box up and send it to me. I could use another seat. But the only way up that hill is one step at a time. So stop snivelling and crack open that manual.

Similar Messages

Totally Clueless & Need some help!

Ok so i have my first Macbook Pro... im not a computer wizz and really know nothing about them. So i need some help!
I have tried to install Snow Leopard and the installation finishes but nothing has changed? I dont have any of the new functions im still running on the normal Safari not Safari4, I have tried to download Safari4 but it says "Safari cannot be installed on this disk, this update requires Mac OS X 10.5.8 or newer"
I went into the apple menu and into 'about this mac' and it says im running on OS X 10.6.
Its like it has installed SL.. but nothing has been actually installed properly!
HELP! And dumb it down for me!!! LOL

Thank you for your help. One more if I may.
If I open my MacBook Pro 10.6 SL in the normal manner then go to About This Mac > More Info > Software, the System Software Overview among other things shows. 64-bit Kernel and Extensions: No.
If I Restart my computer holding down the 6 and 4 keys the answer then becomes Yes.
My question is do I really have to concern myself about this or, can I just start my computer in the normal manner and forget the No or Yes?

IPod Neophyte needs your HELP!!! (library transfer to iPod)

I recently upgraded to iTunes 7.01, **but this problem remains (b4 and after upgrade)! Can anyone tell me why (and how to fix) my iTunes Library shows aprox. 2800 songs (aprox. 15 GB), but regardless of how many times I connect my iPod (30GB 5th gen., NOT late 2006 version) to my PC (to charge, etc.)-- my iPod only contains/displays aprox. 2600 songs (13+ GB)?!?! What do I need to rectify this? Thanx in advance to all you much smarter technophiles!

did you check your itunes options to see if you
have
selected the 'Only Update checked songs' option
and
if some songs in your itunes library are
unchecked?
if this is so then unselect the 'Only update
checked
songs' option. Hope this helps
(2) YEAH, I checked and this option is NOT checked, so that's Not the problem
Thanx though!
*ANY OTHER SUGGESTIONS?? "Bueller..., Bueller anyone?"

Need Urgent Help in PM8M-V H problem - keyboard freeze

Hi everyone,
I'm a newbie in this forum and I really need urgent help with my motherboard.
My PC specification:
Intel Pentium 4 2.4GHz
MSI PM8M-V H W7104VMS v3.4 022206 14:32:17
1GB(512MB x 2) Kingston PC3200 400MHz
Seagate SATA II 320GB ST3320620SV (set with jumper to support SATA I)
Power Color ATI Radeon 9550 256MB
Lite-On DVDRW SHM-165P6S
USB mouse, PS/2 Keyboard
I really appreciate if anyone can help to guide me in solving my problem. My keyboard tends to freeze at the part where it says "Press any key to boot from CD". This limits me to do anything until I'm totally loaded into Windows. Thus, disable me to perform any formating and fresh installation of OS. However, the keyboards works fine at the begining of the POST and in BIOS. Is there any settings in BIOS that i should perform?.....
However, I realise in order to get through the foresaid message without the the keyboard freeze up is by keep on trying to boot up and shut down until it works (but only work once, then hv to try again), but this is not a solution as if what if I wanted to have 2 OS?... I cant use the keyboard to choose either of the OS installed. I have tried to change the RAM, change keyboard, use the build in VGA, or even remove the motherboard from the ATX casing - result: still have the same problem. What should I do??.. I have look around the forum for answers but there isnt any (I hope I didnt miss any). Is there any problem with my motherboard, or its BIOS, or any of the harware compatibility or etc..... what actually can I do?
I do not dare to perform any BIOS update Unnecessary (it seems that many have problems with BIOS problem in this forum) and moreover i think my BIOS is the most up-to-date. I cant find any new version in the net. Anyway I will check this topic frequently as possible to hope for any solution. What is the best solutions?
Thanks.

But the thing that makes me wonder is, my BIOS version is the latest but why this type of problem occurs??
What version of BIOS should I use?? Any recommendation ??
Thanks.

Anybody who can help me? I really need your help

I've tried to execute J2ee tutorial examples.
I don't know why this sample didn't execute...I've already finished to set up J2EE and enviornment variables.
I was trying this part from j2ee tutorial titled as "Packing Web modules".
Whenever I type "asant create-war" to make web modules in command window. I always got error.
Packaging Web Modules(From J2ee tutorial for your information)
A web module must be packaged into a WAR in certain deployment scenarios and whenever you want to distribute the web module. You package a web module into a WAR using the Application Server deploytool utility, by executing the jar command in a directory laid out in the format of a web module, or by using the asant utility. This tutorial allows you to use use either the first or the third approach. To build the hello1 application, follow these steps:
In a terminal window, go to <INSTALL>/j2eetutorial14/examples/web/hello1/.
Run asant build. This target will spawn any necessary compilations and will copy files to the <INSTALL>/j2eetutorial14/examples/web/hello1/build/ directory.
To package the application into a WAR named hello1.war using asant, use the following command:
asant create-war
This command uses web.xml and sun-web.xml files in the <INSTALL>/j2eetutorial14/examples/web/hello1 directory.
To learn how to configure this web application, package the application using deploytool by following these steps:
Start deploytool.
Create a web application called hello1 by running the New Web Component wizard. Select FileNewWeb Component.
In the New Web Component wizard:
Select the Create New Stand-Alone WAR Module radio button.
In the WAR File field, enter <INSTALL>/j2eetutorial14/examples/web/hello1/hello1.war. The WAR Display Name field will show hello1.
In the Context Root field, enter /hello1.
Click Edit Contents to add the content files.
In the Edit Contents dialog box, navigate to <INSTALL>/j2eetutorial14/examples/web/hello1/build/. Select duke.waving.gif, index.jsp, and response.jsp and click Add. Click OK.
Click Next.
Select the No Component radio button and click Next.
Click Finish.
Select FileSave.
A sample hello1.war is provided in <INSTALL>/j2eetutorial14/examples/web/provided-wars/. To open this WAR with deploytool, follow these steps:
Select FileOpen.
Navigate to the provided-wars directory.
Select the WAR.
Click Open Module.
I guess this step is for checking my system about setup information. I not sure how to change it.
the result from execution of ansnt command in dos
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>asant create- war Buildfile: build.xml
j2ee-home-test:
BUILD FAILED D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\common\targets.xml:10: T he j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/c ommon/build.properties.
Set the j2ee.home property to the location of your Application Server installati on.
On Windows, you must escape any backslashes in the j2ee.home property with anoth er backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to:
Total time: 0 seconds
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>
I've installed J2ee sdk in C:\Sun\AppServer
PATH: %J2EE_HOME%\bin;%JAVA_HOME%\bin;
CLASSPATH: %J2EE_HOME%\lib\j2ee.jar;C:\Java\jre1.6.0_05\lib\ext\QTJava.zip;C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jar
J2EE_HOME: C:\Sun\AppServer
JAVA_HOME: C:\Sun\AppServer\jdk
I've installed J2ee with administration 4848, HTTP: 8089 HTTP: 8090
I guess this could refer the target.xml and build.properties. So, I've tried after changing some value, which is fit for my setup.
but, still doesn't work.
targets.xml
<path id="classpath">
<fileset dir="${j2ee.home}/lib">
<include name="j2ee.jar"/>
</fileset>
</path>
<target name="j2ee-home-test" >

<available file="${j2ee.home}/lib/j2ee.jar" type="file" property="j2ee.jar.present" />
<fail unless="j2ee.jar.present">
The j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/common/build.properties.
Set the j2ee.home property to the location of your Application Server installation.
On Windows, you must escape any backslashes in the j2ee.home property with another backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to: ${j2ee.home}
</fail>
</target>
<target name="clean" >
<delete dir="${build}" />
<delete dir="${dist}" />
<delete dir="${assemble}" />
<delete file="${ear.name}" />
<delete file="${war.name}" />
<delete file="${war.file}" />
<delete file="${client.jar.name}" />
</target>
<path id="db.classpath">
<fileset dir="${db.root}/lib">
<include name="*.jar"/>
</fileset>
</path>
<target name="create-db_common"
depends="init,start-db,delete-db"
description="Create database tables and populate database." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="abort" >
<transaction src="${sql.script}"/>
</sql>
</target>
<target name="delete-db"
description="Deletes the database tables." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="continue" >
<transaction src="${delete.sql.script}"/>
</sql>
</target>
<target name="ping-db"
description="Checks to see if Derby is running." >
<java classname="org.apache.derby.drda.NetworkServerControl"
fork="yes"
resultproperty="db.ping.result">
<jvmarg line="${db.jvmargs}" />
<arg line="ping" />
<classpath refid="db.classpath" />
</java>
<condition property="db.running">
<equals arg1="${db.ping.result}" arg2="0" />
</condition>
</target>
<target name="start-db"
unless="db.running"
description="Starts the Derby databse server."
depends="ping-db">
<sun-appserv-admin
explicitcommand="start-database" />
</target>
<target name="stop-db"
description="Stops the Derby database server."
depends="ping-db"
if="db.running">
<sun-appserv-admin
explicitcommand="stop-database" />
</target>
<target name="admin_command_common">
<echo message="Doing admin task ${admin.command}"/>
<sun-appserv-admin
command="${admin.command}"
user="${admin.user}"
passwordfile="${admin.password.file}"
host="${admin.host}"
port="${admin.port}"
asinstalldir="${j2ee.home}" />
</target>
<target name="create-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="create-jdbc-resource
--connectionpoolid ${conpool.name} ${jdbc.resource.name}" />
</antcall>
</target>
<target name="delete-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="delete-jdbc-resource ${jdbc.resource.name}" />
</antcall>
</target>
<target name="deploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="deploy ${war.file}" />
</antcall>
</target>
<target name="undeploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="undeploy ${example}" />
</antcall>
</target>
<property environment="env" />
<target name="listprops"
description="Displays values of some of the properties of this build file">
<property file="../../common/admin-password.txt" />
<echo message="Path information" />
<echo message="j2ee.home = ${j2ee.home}" />
<echo message="j2ee.tutorial.home = ${j2ee.tutorial.home}" />
<echo message="env.Path = ${env.Path}" />
<echo message="env.PATH = ${env.PATH}" />
<echo message="" />
<echo message="Classpath information" />
<echo message="classpath = ${env.CLASSPATH}" />
<echo message="" />
<echo message="Admin information" />
<echo message="admin.password = ${AS_ADMIN_PASSWORD}" />
<echo message="admin.password.file = ${admin.password.file}" />
<echo message="admin.host = ${admin.host}" />
<echo message="admin.user = ${admin.user}" />
<echo message="admin.port = ${admin.port}" />
<echo message="https.port = ${https.port}" />
<echo message="" />
<echo message="Domain information" />
<echo message="domain.resources = ${domain.resources}" />
<echo message="domain.resources.port = ${domain.resources.port}" />
<echo message="" />
<echo message="Database information" />
<echo message="db.root = ${db.root}" />
<echo message="db.driver = ${db.driver}" />
<echo message="db.host = ${db.host}" />
<echo message="db.port = ${db.port}" />
<echo message="db.sid = ${db.sid}" />
<echo message="db.url = ${db.url}" />
<echo message="db.user = ${db.user}" />
<echo message="db.pwd = ${db.pwd}" />
<echo message="url.prop = ${url.prop}" />
<echo message="ds.class = ${ds.class}" />
<echo message="db.jvmargs = ${db.jvmargs}" />
</target>
build.properties ��
j2ee.home=
j2ee.tutorial.home=
asinstall.dir=${j2ee.home}
admin.password.file=${j2ee.tutorial.home}/examples/common/admin-password.txt
admin.host=localhost
admin.user=admin
admin.port=4848
https.port=8181
domain.resources="domain.resources"
domain.resources.port=8080
# Derby configuration settings
db.delimiter=;
db.root=${j2ee.home}/derby
db.driver=org.apache.derby.jdbc.ClientDriver
db.datasource=org.apache.derby.jdbc.ClientDataSource
db.host=localhost
db.port=1527
db.sid=sun-appserv-samples
db.url=jdbc:derby://${db.host}:${db.port}/${db.sid};create=true;
db.user=APP
db.pwd=APP
db.jvmargs=-ms16m -mx32m
Is there anyone who can tell me how to change it? I really need your help....
Thank you in advance.

ok,
First of all make sure your tutorial folder is installed from the root:
C:\javaeetutorial5
or
D:\javaeetutorial5
it makes things so simple.
Secondly:
set your jee tutorial home
JAVAEE.TUTORIAL.HOME =
C:/javaeetutorial5
Thirdly: check in:
C:\javaeetutorial5\examples\bp-project
make a copy of the build.properties.sample save it as build.propropties, as a property file,
edit the properties file as in:
build.properties
As follows:
# uncomment the property javaee.home, and add the path
# to your GlassFish Java EE 5 SDK installation
javaee.home=c:/Sun/SDK
javaee.tutorial.home=c:/javaeetutorial5
# Uncomment the property j2ee.server.username,
# and replace the administrator username of the app-server
javaee.server.username=admin
# Uncomment the property j2ee.server.passwordfile,
# and replace the following line to point to a file that
# contains the admin password for your app-server.
# The file should contain the password in the following line:
AS_ADMIN_PASSWORD=admin1234and so fourth. Some of the settings as the application server name is all done for you
and then test it again.
Take care of editing the property file. It can give you headache.
Note also that this is for application server 9.1 - JEE5.
eve

Please I need some help with a table

Hi All
I need some help with a table.
My table needs to hold prices that the user can update.
Also has a total of the column.
my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
I have tried using but as I need to set the toal with something like total
    totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
Can any one please advise on some way I can get this to work ?
Thanks for reading
Craig

Hi there camickr
thanks for the help the other day
this is my full code....
package printing;
import java.awt.*;
import java.awt.event.*;
import java.awt.print.*;
import javax.swing.*;
import javax.swing.table.*;
import java.text.DecimalFormat;
public class tablePanel
    extends JDialog implements Printable {
BorderLayout borderLayout1 = new BorderLayout();
private boolean printing = false;
private Dialog1 dialog;
JPanel jPanel = new JPanel();
JTable table;
JScrollPane scrollPane1 = new JScrollPane();
DefaultTableModel model;
private String[] columnNames = {
private Object[][] data;
private String selectTotal;
private double total;
public tablePanel(Dialog1 dp) {
    dp = dialog;
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
public tablePanel() {
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
private void jbInit() throws Exception {
    jPanel.setLayout(borderLayout1);
    scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
    this.add(jPanel);
    jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
    scrollPane1.getViewport().add(table);
    jPanel.setOpaque(true);
    newTable();
    addToModel();
    addRows();
    setTotal();
public static void main(String[] args) {
tablePanel tablePanel = new tablePanel();
tablePanel.pack();
tablePanel.setVisible(true);
public void setTotal() {
total = 0;
int i = table.getRowCount();
for (i = 0; i < table.getRowCount(); i++) {
    String name = (String) table.getValueAt(i, 1);
    if (!"".equals(name)) {
      if (i != table.getRowCount() - 1) {
        double dt = Double.parseDouble(name);
        total = total + dt;
String str = Double.toString(total);
table.setValueAt(str, table.getRowCount() - 1, 1);
super.repaint();
public void newTable() {
    model = new DefaultTableModel(data, columnNames) {
    table = new JTable() {
      public Component prepareRenderer(TableCellRenderer renderer,
                                       int row, int col) {
        Component c = super.prepareRenderer(renderer, row, col);
        if (printing) {
          c.setBackground(getBackground());
        else {
          if (row % 2 == 1 && !isCellSelected(row, col)) {
            c.setBackground(getBackground());
          else {
            c.setBackground(new Color(227, 239, 250));
          if (isCellSelected(row, col)) {
            c.setBackground(new Color(190, 220, 250));
        return c;
    table.addMouseListener(new MouseAdapter() {
      public void mouseClicked(MouseEvent e) {
        if (e.getClickCount() == 2) {
        if (e.getClickCount() == 1) {
          if (table.getSelectedColumn() == 1) {
   table.setTableHeader(null);
    table.setModel(model);
    scrollPane1.getViewport().add(table);
    table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
public void addToModel() {
    Object[] data = {
        "Price", "5800"};
    model.addRow(data);
public void addRows() {
    int rows = 20;
    for (int i = 0; i < rows; i++) {
      Object[] data = {
      model.addRow(data);
public void printOut() {
    PrinterJob pj = PrinterJob.getPrinterJob();
    pj.setPrintable(tablePanel.this);
    pj.printDialog();
    try {
      pj.print();
    catch (Exception PrintException) {}
public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
    Graphics2D g2 = (Graphics2D) g;
    g2.setColor(Color.black);
    int fontHeight = g2.getFontMetrics().getHeight();
    int fontDesent = g2.getFontMetrics().getDescent();
    //leave room for page number
    double pageHeight = pageFormat.getImageableHeight() - fontHeight;
    double pageWidth = pageFormat.getImageableWidth();
    double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
    double scale = 1;
    if (tableWidth >= pageWidth) {
      scale = pageWidth / tableWidth;
    double headerHeightOnPage = 16.0;
    //double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
    //System.out.println("this is the hedder heigth   " + headerHeightOnPage);
    double tableWidthOnPage = tableWidth * scale;
    double oneRowHeight = (table.getRowHeight() + table.getRowMargin()) * scale;
    int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
    double pageHeightForTable = oneRowHeight *numRowsOnAPage;
    int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
    if (pageIndex >= totalNumPages) {
      return NO_SUCH_PAGE;
    g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
//bottom center
    g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages), (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
    g2.translate(0f, headerHeightOnPage);
    g2.translate(0f, -pageIndex * pageHeightForTable);
    //If this piece of the table is smaller
    //than the size available,
    //clip to the appropriate bounds.
    if (pageIndex + 1 == totalNumPages) {
      int lastRowPrinted =
          numRowsOnAPage * pageIndex;
      int numRowsLeft =
          table.getRowCount()
          - lastRowPrinted;
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(oneRowHeight *
                                 numRowsLeft));
    //else clip to the entire area available.
    else {
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(pageHeightForTable));
    g2.scale(scale, scale);
    printing = true;
    try {
    table.paint(g2);
    finally {
      printing = false;
    //tableView.paint(g2);
    g2.scale(1 / scale, 1 / scale);
    g2.translate(0f, pageIndex * pageHeightForTable);
    g2.translate(0f, -headerHeightOnPage);
    g2.setClip(0, 0,
               (int) Math.ceil(tableWidthOnPage),
               (int) Math.ceil(headerHeightOnPage));
    g2.scale(scale, scale);
    //table.getTableHeader().paint(g2);
    //paint header at top
    return Printable.PAGE_EXISTS;
class TableRenderDollar extends DefaultTableCellRenderer{
    public Component getTableCellRendererComponent(
      JTable table,
      Object value,
      boolean isSelected,
      boolean isFocused,
      int row, int column) {
        setHorizontalAlignment(SwingConstants.RIGHT);
      Component component = super.getTableCellRendererComponent(
        table,
        value,
        isSelected,
        isFocused,
        row,
        column);
        if( value == null || value .equals("")){
          ( (JLabel) component).setText("");
        }else{
          double number = 0.0;
          number = new Double(value.toString()).doubleValue();
          DecimalFormat df = new DecimalFormat(",##0.00");
          ( (JLabel) component).setText(df.format(number));
      return component;
}

My iphone 4 has switch of itself, and cant switch on its blankout , i need some help to solve this matter, My iphone 4 has switch of itself, and cant switch on its blankout , i need some help to solve this matter

i need some help! my i phone has switch off totally blank as if there is no baterry, i cant wsitch on anymore, i live in Africa whereby there is no any apple offises arroung, i want to find a solution thats why i am asking for the help

Plug in iPhone with Wall Charger for 10 minutes, it may turn on itself. If not, keep on Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to restart. This usually takes less than 20 seconds of holding both buttons.

Slow Loading On iWeb Pages - Really in Need of Help! (Thanks!!) :o)

Hi Everyone!
I have been a lurker here, learning from reading other's posts. I am in serious need of help, as I have been struggling with this issue for over a week and I can't move forward to other things until I get it resolved...
Here's what's up: I am creating a single-page website as a landing page for a product I offer. (These are very common now in product marketing). The page is here: http://www.howtogetamazingrelationships.com.
The page that is there is about the 4th iteration of the page in the quest for a faster-loading page. Everytime I test it - no matter what I do - it ends up being about a 24 second load time. Here's a sample test for review: http://tools.pingdom.com/?url=howtogetamazingrelationships.com&treeview=0&column =objectID&order=1&type=0&save=true
Here are the things I have done to try to speed this baby up:
1. Took my youtube video off auto-play.
2. Optimized the site using Web Site Maestro. 27% decrease in size; no load time difference.
3. Took out shapes and graphics.
4. Rebuilt the site on a blank template - now it is actually a little worse!
5. Took out the website.js file - totally messed things up.
6. Eliminated the navigation.
Nothing is even showing the least bit of difference in speed...and it is driving me crazy.
Here's the thing - I have also contacted Web Site Maestro's support for help, and they said that the problem was the size of the site and the length of the page. But here's the thing - I checked the load speed of a page that is about double my page size and length, and it loads in like 4 seconds: http://tools.pingdom.com/?url=http://www.wealthbeyondreason.com/page2.php&treevi ew=0&column=objectID&order=1&type=0&save=true
Anyone have help/advice for me? I am so frustrated with this, as the iWeb is crazy-easy to build, but I can't have a simple one-page product page load that slow. No one is going to stay around for 24 seconds!
I just am at the end up my rope and don't know anything else to do. I really don't want to rebuild the site again and still not see results, so any help would be hugely appreciated.
Thanks so much in advance, and I hope you are all having a beautiful day -
:o) Tara

Okay, more info -
I checked my site on a different web analyzer, and it does seem to be loading quickly - 15.66 seconds for a 56 k, but only 3.6 for T1. So that is good -
One thing I noticed in the recommendations is that there are 6 scripts that are running, that can slow things down. I don't really know how to change that (I am pretty web-savvy, but far from a developer) Here's what they recommended on the page -
Analysis and Recommendations from webanalyzer.com:
TOTAL_OBJECTS - Caution. You have 18 total objects on this page. From 12 to 20 objects per page, the latency due to object overhead makes up from 75% to 80% of the delay of the average web page. See Figure II-3: Relative distribution of latency components showing that object overhead dominates web page latency in Website Optimization Secrets for more details. Consider reducing, eliminating, and combining external objects (graphics, CSS, JavaScript, iFrames and XHTML) to reduce the total number of objects, and thus separate HTTP requests. Consider using CSS sprites to help consolidate decorative images.
TOTAL_IMAGES - Caution. You have a moderate amount of images on this page (10 ). Consider using fewer images on the site or try reusing the same image in multiple pages to take advantage of caching. Using CSS techniques such as colored backgrounds, borders, or spacing instead of graphic techniques can help reduce HTTP requests.
TOTAL_SCRIPT - Warning! The total number of external script files on this page is 6 , consider reducing this to a more reasonable number. Combine, refactor, and minify to optimize your JavaScript files. Ideally you should have one (or even embed scripts for high-traffic pages) on your pages. Consider suturing JavaScript files together at the server to minimize HTTP requests. Placing external JavaScript files at the bottom of your BODY, and CSS files in the HEAD enables progressive display in XHTML web pages.
HTML_SIZE - Caution. The total size of this HTML file is 60492 bytes, which is above 50K but below 100K. With 50K of images and multimedia this means that your page will load in about 20 seconds. Consider optimizing your HTML and eliminating unnecessary features. To give your users feedback, consider layering your page or using positioning to display useful content within the first two seconds.

Cannot get slide show in full screen mode to come up on secondary monitor regardless of how I set up show it always opens on primary screen. Need some help here.

Slide show in PowerPosint for mac 2011 on iMac will not open full screen mode on secondary monitor. Regardless of how I set the slide show preferences it always opens on primary monior with secondardy monitor having totally balck screen. Need some help if anyone else has run into this problem.

You should contact Microsoft for Mac Support and/or post in their forums.

Need a help / advice & guidance whether to switch on my Career in SAP-PM from core industries after spending my 09 years of experience in Core field that to in Maintenance.

Hello Adviser /expert,
Need a help / advice & guidance whether to switch on my Career in SAP-PM from core industries after spending my 09 years of experience in Core field that to in Maintenance.
As now i m thinking to do SAP-PM certified course from authorized SAP partner in India that to Pune.
So any one can suggest authorized SAP partner in India that to Pune.
My introduction (About myself): - I had done my Diploma in Mechanical and had total 09 years of experience in Mechanical Maintenance field that to in different manufacturing company such as Steel, Auto Ancillary & Cotton plant.
Whether its right decision to change my career from Core sector to SAP-PM..??
Is there very good scope in SAP-Pm for me after 09 years of Core Maintenance field..???
Guide me
Warm Regard
Ravin

Ravindra,
SAP PM is very niche Module, very in demand module, at the same time, being niche, getting into it and getting 1 implementation is also difficult.
your decision of joining SAP authorized training is the best option, as a certified consultant, you have more chances to get a break as fresher and you can continue working on it, else it would waste of your intellectual energy.
you just search sap.com training or email them or chat with them, they will give u the training center details,
but very less training classes are available. Try you will get lucky soon

Need some help in LiveCycle Designer ES 8.2

Hi i need help with tables in livecyckle.
Example. I create one table with 32 rows and 8 numretic cells, and another table below with 1 row and 8 numretic cells.
In the big table i can input numbers and working fine.
now to my problem. Ex, i want to input number 12 in row 1 cell 3.and then again same number 12 in row 2 cell 3 and i want the result (24) in table 2 row 1 cell 3. is there anyboby who can help me with that See below
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Header 7
Header 8
12
3
5
12
7
9
4
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Header 7
Header 8
4
24
10
14
Best regards Stig

Hi again Steve and thanx for the reply..send you a coupie of my file.
All text on it is in swedish so i can explain a little for you.
Text Veckodag is Weekday,Tim is hours. Frånv. is a shortname for sickness,
Dagtid is daytime Kväll is evening, Helg is weekends, Afton is Big weekend
like christmas day, s-helg is a shortname for big weekendsdays like day
after christmas day, Jour is jour. The field to the left with numbers is
date. Totalt is total
The only fields i need some help with is the field from Tim to Jour. And the
result should apear in the last fielt Totalt
Can also tell that im not so good in english but im learning. And the last
thing of all :Happy easter to you and thanxs again.
Stig in sweden My E-mail adress is [email protected]

Very slow performance running Mavericks - need troubleshooting help

Hello folks:
I have a MBP 2011 which was upgraded to Mavericks from Mountain Lion about 6 weeks ago. Since then I have had a major performance drop - slow machine, very slow window renderings, etc. I know a number of people have been facing these issues and have been recommended to clean up 3rd party extensions/agents. I ran Etrecheck (report below) and I need some help with fixing the failed kernel extensions and launch daemons. Thanks much!
Pavan
Hardware Information:
MacBook Pro (13-inch, Late 2011)
MacBook Pro - model: MacBookPro8,1
1 2.8 GHz Intel Core i7 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9 (13A603) - Uptime: 6 days 4:6:6
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Hurricane (disk0s2) /: 749.3 GB (257.76 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information:
Western Digital My Book 1148 3 TB
EFI (disk4s1) <not mounted>: 209.7 MB
disk4s2 (disk4s2) <not mounted>: 3 TB
Boot OS X (disk4s3) <not mounted>: 134.2 MB
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Memorex TRAVELDRIVE 005B 16.01 GB
EFI (disk2s1) <not mounted>: 209.7 MB
Untitled (disk2s2) /Volumes/Untitled: 15.67 GB (15.63 GB free)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6)
Problem System Launch Daemons:
[failed] com.apple.AOSNotificationOSX.plist
[failed] com.apple.installd.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.versioncueCS3.plist
[loaded] com.barebones.textwrangler.plist
[loaded] com.cisco.anyconnect.vpnagentd.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.oracle.java.Helper-Tool.plist
[loaded] org.macosforge.xquartz.privileged_startx.plist
Launch Agents:
[loaded] com.cisco.anyconnect.gui.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.oracle.java.Java-Updater.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[failed] com.apple.CSConfigDotMacCert-[redacted]@me.com-SharedServices.Agent.plist
[loaded] com.google.Chrome.framework.plist
User Login Items:
Flux
iTunesHelper
Google Drive
Google Chrome
AdobeResourceSynchronizer
3rd Party Preference Panes:
Flash Player
Java
Internet Plug-ins::
o1dbrowserplugin: Version: 4.9.1.16010
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.2.0.49
Loki: Version: 3.0
net.juniper.DSSafariExtensions: Version: (null)
RealPlayer Plugin: Version: Unknown
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
DivXBrowserPlugin: Version: 1.3
Silverlight: Version: 5.1.20513.0 - SDK 10.6
Flash Player: Version: 11.9.900.170 - SDK 10.6
AmazonMP3DownloaderPlugin: Version: Unknown
googletalkbrowserplugin: Version: 4.9.1.16010
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
iPhotoPhotocast: Version: 6.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
JavaAppletPlugin: Version: Java 7 Update 45
User Internet Plug-ins::
Picasa: Version: 1.0
Google Earth Web Plug-in: Version: 7.1
Bad Fonts:
None
Old applications:
Audacity: Version: 1.3.14.0 - SDK 10.4
/Applications/Audacity/Audacity.app
Hugin: Version: 2011.4.0 - SDK 10.4
/Applications/Hugin/Hugin.app
Keynote: Version: 5.3 - SDK 10.5
/Applications/iWork '09/Keynote.app
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Document Connection.app
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
Microsoft Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Excel.app
Microsoft Graph: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Graph.app
Microsoft Language Register: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
Microsoft Outlook: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Outlook.app
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft PowerPoint.app
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
Microsoft Word: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Word.app
My Day: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/My Day.app
Open XML for Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Open XML for Excel.app
PTBatcherGUI: Version: 2011.4.0 - SDK 10.4
/Applications/Hugin/PTBatcherGUI.app
Picasa: Version: 3.9.16 - SDK 10.4
/Applications/Picasa.app
SLLauncher: Version: 1.0 - SDK 10.5
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Solver: Version: 1.0 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
Spotify: Version: 0.8.4.107.g4fa0003f - SDK 10.5
/Applications/Spotify.app
SyncServicesAgent: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
calibrate_lens_gui: Version: 2011.4.0 - SDK 10.4
/Applications/Hugin/calibrate_lens_gui.app
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Hurricane: Disk size: 697.84 GB Disk used: 457.78 GB
Destinations:
Gasolina [Local] (Last used)
Total size: 3
Total number of backups: 18
Oldest backup: 2013-07-09 19:11:24 +0000
Last backup: 2013-12-13 19:35:36 +0000
Size of backup disk: Excellent
Backup size 3 > (Disk size 697.84 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      22% storeagent
      2% WindowServer
      1% backupd
      1% Google Chrome
      1% EtreCheck
Top Processes by Memory:
119 MB Google Chrome
102 MB Google Chrome Helper
82 MB mds_stores
57 MB Finder
33 MB WindowServer
Virtual Memory Statistics:
45 MB Free RAM
792 MB Active RAM
748 MB Inactive RAM
1.06 GB Wired RAM
37.63 GB Page-ins
1.98 GB Page-outs

Here’s your report with some comments:
Hardware Information:
MacBook Pro (13-inch, Late 2011)
MacBook Pro - model: MacBookPro8,1
1 2.8 GHz Intel Core i7 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9 (13A603) - Uptime: 6 days 4:6:6
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Hurricane (disk0s2) /: 749.3 GB (257.76 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information:
Western Digital My Book 1148 3 TB    WD drives are one of the worst things that can happen to a mac. They have software on the drive and also in the firmware of the drive enclosure that is incompatible with Mavericks. The software that they also want you to install on your mac (to run the drive with the shitware on it that is incompatible with Mavericks) is also incompatible with Mavericks. The best thing to do with this drive is to open it and remove the hard drive and put it into a new (non-WD) enclosure. Then smash the WD enclosure into little bits with a sledgehammer and mail it back to WD.
EFI (disk4s1) <not mounted>: 209.7 MB
disk4s2 (disk4s2) <not mounted>: 3 TB
Boot OS X (disk4s3) <not mounted>: 134.2 MB
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Memorex TRAVELDRIVE 005B 16.01 GB
EFI (disk2s1) <not mounted>: 209.7 MB
Untitled (disk2s2) /Volumes/Untitled: 15.67 GB (15.63 GB free)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6)     This would be part of the shitware that you installed from WD. I would uninstall the WD application that installs this driver. If the driver is still there after that, I'd look for the extension in /System/Library/Extensions and delete it from there. This may have damaged your kernel, though. If your performance is not improved after removing the WD app and this extension, you should probably back up your documents, erase your HD, and do a clean reinstall of Mavericks.
Problem System Launch Daemons:
[failed] com.apple.AOSNotificationOSX.plist
[failed] com.apple.installd.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist    These four are all apple software. I would try repairing your hard drive: Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery . Then restart, reassess your mac’s performance, and rerun Etrecheck. If that doesn’t work, I’d reinstall Mavericks over your current installation. If that doesn’t work, I’d do a clean install.
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.versioncueCS3.plist
[loaded] com.barebones.textwrangler.plist
[loaded] com.cisco.anyconnect.vpnagentd.plist
[loaded] com.google.keystone.daemon.plist    spyware from google
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.oracle.java.Helper-Tool.plist
[loaded] org.macosforge.xquartz.privileged_startx.plist
Launch Agents:
[loaded] com.cisco.anyconnect.gui.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.oracle.java.Java-Updater.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[failed] com.apple.CSConfigDotMacCert-[redacted]@me.com-SharedServices.Agent.plist   see the suggestions above.
[loaded] com.google.Chrome.framework.plist    This is why I prefer Safari. It doesn’t install all this extra junk.
User Login Items:
Flux
iTunesHelper
Google Drive   Last I heard Google drive was incompatible with Mavericks.
Google Chrome
AdobeResourceSynchronizer
3rd Party Preference Panes:
Flash Player
Java
Internet Plug-ins::   Way too many of these. If you have poor browser performance, get rid of these, and then only reinstall ones you absolutely need, and make sure they are mavericks compatible and up-to-date.
o1dbrowserplugin: Version: 4.9.1.16010
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.2.0.49
Loki: Version: 3.0
net.juniper.DSSafariExtensions: Version: (null)
RealPlayer Plugin: Version: Unknown
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
DivXBrowserPlugin: Version: 1.3
Silverlight: Version: 5.1.20513.0 - SDK 10.6
Flash Player: Version: 11.9.900.170 - SDK 10.6
AmazonMP3DownloaderPlugin: Version: Unknown
googletalkbrowserplugin: Version: 4.9.1.16010
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
iPhotoPhotocast: Version: 6.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
JavaAppletPlugin: Version: Java 7 Update 45
User Internet Plug-ins::
Picasa: Version: 1.0
Google Earth Web Plug-in: Version: 7.1
Bad Fonts:
None
Old applications:
Audacity: Version: 1.3.14.0 - SDK 10.4
/Applications/Audacity/Audacity.app
Hugin: Version: 2011.4.0 - SDK 10.4
/Applications/Hugin/Hugin.app
Keynote: Version: 5.3 - SDK 10.5
/Applications/iWork '09/Keynote.app
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Document Connection.app
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
Microsoft Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Excel.app
Microsoft Graph: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Graph.app
Microsoft Language Register: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
Microsoft Outlook: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Outlook.app
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft PowerPoint.app
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
Microsoft Word: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Word.app
My Day: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/My Day.app
Open XML for Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Open XML for Excel.app
PTBatcherGUI: Version: 2011.4.0 - SDK 10.4
/Applications/Hugin/PTBatcherGUI.app
Picasa: Version: 3.9.16 - SDK 10.4
/Applications/Picasa.app
SLLauncher: Version: 1.0 - SDK 10.5
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Solver: Version: 1.0 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
Spotify: Version: 0.8.4.107.g4fa0003f - SDK 10.5
/Applications/Spotify.app
SyncServicesAgent: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
calibrate_lens_gui: Version: 2011.4.0 - SDK 10.4
/Applications/Hugin/calibrate_lens_gui.app
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Hurricane: Disk size: 697.84 GB Disk used: 457.78 GB
Destinations:
Gasolina [Local] (Last used)
Total size: 3
Total number of backups: 18
Oldest backup: 2013-07-09 19:11:24 +0000
Last backup: 2013-12-13 19:35:36 +0000
Size of backup disk: Excellent
Backup size 3 > (Disk size 697.84 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      22% storeagent
      2% WindowServer
      1% backupd
      1% Google Chrome
      1% EtreCheck
Top Processes by Memory:
119 MB Google Chrome
102 MB Google Chrome Helper
82 MB mds_stores
57 MB Finder
33 MB WindowServer
Virtual Memory Statistics:
45 MB Free RAM
792 MB Active RAM
748 MB Inactive RAM
1.06 GB Wired RAM
37.63 GB Page-ins
1.98 GB Page-outs This is the highest amount of page-outs I have ever seen. I'd get rid of Chrome and Google Drive. Dropbox works fine and doesn't screw up my mac.

Trying to make a photo contest need some help

Trying to make a photo contest need some help. I am running a
fish photo contest on my website and was wondering if any of you
could give me some advice on some good extensions to help me do
this easier. Basically I want a page where people upload a file and
then it automatically resizes the image and puts it on a page,
where people can vote on the pictures.

Hi Pilot,
Column B contains the sale amounts.
Column C will contain the tax amounts.
I'm assuming a header row, and the first line of data to be row 2.
In C2, enter: =B*20%
Click Accept, then use the mouse to drag the small round handle at the lower right of the selected cell (C2) to fill the formula into the rest of the cells in column C.
This simple version of the formula will put zeros in all column C cells where no amount has been entered in the corresponding cell in column B. The revised formula below takes care of that.
C2: =IF(B,B*20%,"")
I'd strongly suggest that 'rookies', as you describe yourself, download and read both the Numbers User Guide and the Functions and Formulas User Guide. Both are available from the Help menu in Numbers. If you use Pages and Keynote, you should use the Help menu in those applications to download their User Guides as well. The guides are searchable pdf files, well written, easy to read, and useful to rookies and old hands as well.
Regards,
Barry

Need some help with color on a column.

Hello
I need some help on how I can set the color on either column header or the whole column.
I have a report with where the first row display a total sum. The rows under that are htmldb_item.text where the user may input some values.
The sum of these textboxes should match the the total column on top. If it does not match then the header or column should be marked red.
I have one pl/sql prosess where i check this, and i return a message for that column, can I in this prosess set the column color for the report?
report looks like this
total1----total2----total3....
box1-----box2-----box3....
box1-----box2-----box3....
box1-----box2-----box3....
box1-----box2-----box3....
so if the sum of all the box1s do not match total1 then column or header is red.
thanks,
Anders

Hi Anders,
have a look at Carls example: http://htmldb.oracle.com/pls/otn/f?p=11933:7:3740381051529350
It works with row template, but maybe you can change it for working with column templates.
chrissy

Need some help with MDX formula

Hello, I am not finding any good documentation on MDX formulas, there is a specific one that I need some help with....could someone please elaborate what exactly does this formula mean? thanks.
(MEASURES.[SIGNEDDATA],
CLOSINGPERIOD([%TIMEDIM%].
[%TIMEBASELEVEL%]))

If new MEASURE gets added to Measure's table , in BPC Client , etools->client Options-> Refresh Dimensions should get the new measure into the CurrentView .IF not try etools->client Options-> Clear Local application information .
Formula 2 :
(MEASURES.SIGNEDDATA,
CLOSINGPERIOD(%TIMEDIM%.
%TIMEBASELEVEL%))
This formula is used to retrieve AST & LEQ account values.
If current time member is at monthlevel ,ie ClosingPeriod of 2011.FEB is the current member it self ,and would retrieve 2011.FEB value.
If Current time member is at quarter level then ClosingPeriod of 2011.Q1 is 2011.Mar ,and would retrieve 2011.MAR value.
If Current time member is at year level then ClosingPeriod of 2011.TOTAL is 2011.DEC ,and would retrieve 2011.DEC value.
Formula 1 :
MEASURES.SIGNEDDATA
Irrespective of the level of the Time , MEASURES.SIGNEDDATA would retrieve current Time member value.This formula is used to retrieve INC & EXP account values
if current time member is at month level,2011.FEB , 2011.FEB value is retrieved.
if current time member is at quarter level,2011.Q1 , 2011.Q1(JANFEBMAR) value is retrieved.
if current time member is at year level,2011.TOTAL , 2011.TOTAL(JAN,FEB,....,DEC) value is retrieved.
Hope this helps.

Total Neophyte needs Mouse help

Similar Messages

Maybe you are looking for