Total newb wonders about movie size when recording from HD-cam

Hi, I've got a HD-cam set to 16:9 and I've got a iMovie11 -made project which is set to 16:9. However, everytime I set in to capture video in iMovie, the resulting video is "less" than what the camera's display showed me. And for some reason, sometimes the picture "drops" (as if there's more of the footage available than what is shown by iMovie's preview screen) and rises back up to the center, where it again shows "less than expected". I'm wondering, what am I doing wrong, is there some switch I know nothing about, or something in iMovie which would let me watch the whole video.

Similar Messages

High Pitched Noise When Recording From iSight Camera

I apologize if this has been asked before. I did a search on here as well as with Google.
Whenever I record a video clip using the built in iSight camera I notice that there is a constant high-pitched noise embedded in the clip. You don't hear the noise during recording, and otherwise the audio is crystal clear during playback, but I can't seem to figure out what is causing this noise. Video clips I import into iMovie don't have this problem. Has anyone else experienced this problem? How can I prevent this from happening with future recordings?

Hello obsidianspider
I am sorry to report that you are one of about ten people who have posted here about audio noises during video recordings with MacBooks. I listened to your YouTube clip, and I believe you are hearing something. I can hear the muffled "thumping" of background noises being amplified because there is no voice or other close sound being recorded in your video, but my old ears do not hear anything high pitched in your video (or anywhere else for that matter.)
I am sure Apple is aware of the issue, but with so small a number reporting this issue among thousands of MacBooks sold, I understand why there is not yet a kBase technical article on this subject.
I expect that Apple searches its warranty & repair work for quality issues and trends, but, if you have not (and do not) contact Apple or your retailer for service on this issue, please report your problem via MacBook Feedback so Apple can accurately record the magnitude of this problem. Unlike posting in this user forum, "Feedback" reports go directly to Apple.
We users who post here have found no solution yet, so the problem appears to require professional service for resolution.
However, if you are willing to try a test, please post back and tell us whether video or movie clip recording applications other than Apple's give the same audio noise you hear when using iSight with iMovie. Apple's QuickTime Pro has already been tested and found to exhibit the problem.
If you have access to an external microphone that can be located away from your Mac while you record video, you could also test to see whether you are recording a physical sound coming from your Mac or electronic noise being produced within your Mac's circuitry.
If you want to read the suggestions we have offered for minimizing your audio noise in video recordings, take a look at the suggestions offered in Eemma's thread, which was the first to report this problem. The suggestions for minimizing noise start here:
http://discussions.apple.com/thread.jspa?messageID=4483866&#4483866
If you want to read what other users who experience this (or similar noise) problem, you can find them in these two threads:
http://discussions.apple.com/thread.jspa?threadID=972540
http://discussions.apple.com/thread.jspa?threadID=1136286
If you or any other reader finds a solution, please share it.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.10) G5 DP 1.8 w/Mac OS X (10.5) External iSight

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

iDVD does not care about file sizes, as it compresses the file to the standard DVD format of mpeg2.
It only cares about length i.e. max 2 hours including titles etc.
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

My photos shrink in size when emailed from IPHOTO or attached - How can I fix this. My friends say they can't see my pictures... thanks!!

My photos shrink in size when emailed from IPHOTO or attached - How can I fix this. My friends say they can't see my pictures... thanks!!

When you email from iPhoto, you have a choice as to the size of the picture - choose medium and your friends will be able to see them. By the way, do your friends click on the photo attachment in the mail to open it?

When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

There is an option in your Lightroom preferences on the General tab, "Treat JPEG files next to raw files as separate images". If you have that option checked then Lightroom will import and display both your raw and JPEG files. Are you using active D-lighting on your camera? If you are then you need to turn off that feature.

Can't get sound to play back on Movie Maker when recording with internal webcam/microphone

I have a Windows 8, 64-bit Envy notebook. I tried using Google Hangouts but there wasn't any sound (the camera was fine).
Later, I decided to test the internal microphone myself by creating a Movie Maker file, and clicking on Webcam and making a recording. The camera worked but it played back in total silence.
I checked the settings for the microphone and the internal mic was properly set as the default. I turned up the volume to the maximum. Then I found directions for doing a sound check, and I was able to do the Sound Recording check and get audio when I played the file back.
But when I tried again to make a video, i got zero in the playback.
Any idea what's going wrong?
Thanks,
Pat

Hello Myerspat,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how you are not able to get sound from your notebook computer, and I would be happy to assist you in this matter!
To restore the audio to your notebook, I recommend following this document on No Sound from Speakers (Windows 8). This should help with the playback on your system.
In addition, you can also follow @SuperMario1's thread on Troubleshooting Guide: Audio does not Work after a Certain Period of Time. This guide should help with your notebook's audio output in regards to a recent Windows Update.
For more assistance, I will need to know:
The Product and Model Number of your notebook computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Large PDF file sizes when exporting from InDesign

Hi,
I was wondering if anyone knew why some PDF file sizes are so large when exporting from ID.
I create black and white user manuals with ID CS3. We post these online, so I try to get the file size down as much as possible.
There is only one .psd image in each manual. The content does not have any photographs, just Illustrator .eps diagrams and line drawings. I am trying to figure out why some PDF file sizes are so large.
Also, why the file sizes are so different.
For example, I have one ID document that is 3MB.
Exporting it at the smallest file size, the PDF file comes out at 2MB.
Then I have another ID document that is 10MB.
Exporting to PDF is 2MB (the same size as the smaller ID document)... this one has many more .eps's in it and a lot more pages.
Then I have another one that the ID size is 8MB and the PDF is 6MBwhy is this one so much larger than the 10MB ID document?
Any ideas on why this is happening and/or how I can reduce the file size.
I've tried adjusting the export compression and other settings but that didn't work.
I also tried to reduce them after the fact in Acrobat to see what would happen, but it doesn't reduce it all that much.
Thanks for any help,
Cathy

> Though, the sizes of the .eps's are only about 100K to 200K in size and they are linked, not embedded.
But they're embedded in the PDF.
> It's just strange though because our marketing department as an 80 page full color catalog that, when exported it is only 5MB. Their ID document uses many very large .tif files. So, I am leaning toward it being an .eps/.ai issue??
Issue implies there's something wrong, but I think this is just the way
it's supposed to work.
Line drawings, while usually fairly compact, cannot be lossy compressed.
The marketing department, though, may compress their very large TIFF
files as much as they like (with a corresponding loss of quality). It's
entirely possible to compress bitmaps to a smaller size than the
drawings those bitmaps were made from. You could test this yourself.
Just open a few of your EPS drawings in Photoshop, save as TIFF, place
in ID, and try various downsampling schemes. If you downsample enough,
you'll get the size of the PDF below a PDF that uses the same graphics
as line drawing EPS files. But you may have to downsample them beyond
recognition...
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Gaps every 40 seconds when recording from cassette or records

Since purchasing Audition 3.0 some months ago, whenever recording from a cassette or record a blank space is inserted every 40 seconds into the recording. This gap is quite audible when playing the recording back.
I tried to contact support and twice it has not solved the problem...very frustrating...help much appreciated.
This was the major reason for purchasing the software.

Okay, not the results I expected to see, but let's keep hacking.
My next suggestion would be to change the audio device driver being used. Click Edit > Audio Hardware Setup and you should see a drop-down box labeled "Audio Driver." There should be at least 2 drivers listed: Audition 3.0 Windows Sound, and Creative ASIO.
If you are using the Creative ASIO driver, my first recommendation would be to stop. It is notoriously buggy and erratic. I would recommend changing to the Audition 3.0 Windows Sound driver which is not the most powerful driver, but is compatible with almost all hardware out there.
If you were already using this driver, or still experience the recording gaps, my next suggestion would be to visit http://www.asio4all.com/ and download and install the ASIO4ALL driver. It is similar in operation to the Audition driver, but it is based on WDM technology which allows for faster operation and more control over the hardware. Once installed, launch Audition and change the Audio Driver to ASIO4ALL.
If the gaps STILL occur, I think we can probably rule out audio drivers as the cause and move on.
Thanks for your patience as we troubleshoot this!
Durin

Lots of audio pops when recording from mixer

I'm using FCP 5.1.4 on a mac laptop (don't know what type it is, but think it's somewhat recent). I'm recording a stage play's audio.
Here's my audio flow:
Mixer's 1/4" headphone jack -> 1/4" Stereo audio cable -> 1/8" stereo adapter at other end (have also tried 1/8" mono) -> Laptop's microphone port (no other input audio port available)
I can get a good signal, but there's constant audio pops/clicks happening at a steady rate. I remember reading somewhere else that problems can arise when recording directly from a mixer due to the high signal strength coming from it. Any ideas why this is happening? How do I fix this?

Phillip Roh wrote:
What is a mic bus level output?
Most better mixers have direct bus ins and outs. Just like plugging in a mic.
Laptop doesn't have a line in port
Get a different computer if you're expecting to enjoy doing audio capture.
If i used the RCA or XLR output jacks, would the popping still occur?
Irrelevant, it's all about signal type, resistance, milliamperes, millivolts and milliwatts. Not connectors. You can put an XLR on your power supply and it wouldn't change the voltage.
I think my workplace may have a few USB audio things lying around. Like it has 2 XLR input ports, then connects to computer through USB. Do you know if they tend to need certain software, or if they're plug and play?< </div>
Unknown from here. this is not a FCP question.
bogiesan

SWF size when output from CS5 vs. CS6

Hi All,
I've hit a wall and I'm really hoping to get some help!
My company recently updated us from CS5 to CS6. I was pretty excited to start using the new Flash IDE and, for the most part, it's been great. However... there's one issue I can't seem to figure out.
We create lots of banners ads so we have templates built. If I open my 300x250 template in Flash CS5 and publish it's 8243 bytes per the size report. If I open the exact same FLA in Flash CS6 and publish it's 9873 bytes.
I've narrowed it down to miniscule differences in the shapes, but the main difference is in the fonts. The same characters are embedded in the FLA, but the file size is bigger when exported from CS6 (~1449 bytes or 1.4kb). Working in the advertising space we're constantly under the gun to keep our SWFs under 40kb so every little bit counts. This is an issue for our team as that extra 1.4kb means other things have to be compressed further resulting in lower quality.
Has anyone else run into this? I've searched and searched, but could only find a few threads that lead to no definitive answers. Is there a new setting in CS6 that can be turned off? Is there a new way of compressing fonts? For the time being we're reverting back to publishing our SWFs out of CS5 which is a huge headache and affects productivity.
Any help anyone can offer would be VERY much appreciated!
Best,
Vern

M47K / kglad...
Thanks for the responses. I double-checked and only the characters being used in the SWF are embedded, not the entire font.
Further, I did some more experimentation and while switching to LZMA compression helped, it didn't fix the issue. Here are some stats:
Flash Pro CS6 using "Deflate"
File Size: 9967 bytes
ActionScript: 2322 bytes
Font 1: 3665 bytes
Font 2: 819 bytes
Flash Pro CS6 using LZMA - Compared to CS6 using "Deflate"
File Size: 9550 bytes (417 bytes smaller)
ActionScript: 2236 bytes (86 bytes smaller)
Font 1: 3506 bytes (159 bytes smaller)
Font 2: 783 bytes (36 bytes smaller)
Flash Pro CS5 - Compared to CS6 using "Deflate"
File Size: 8353 bytes (1614 bytes smaller)
ActionScript: 2266 bytes (56 bytes smaller)
Font 1: 2472 bytes (1193 bytes smaller)
Font 2: 556 bytes (263 bytes smaller)
Any other help or tips that people might know about would be very much appreciated. As I mentioned in my initial post... I have to squeeze every bit of kb out of the work I do while maintaining quality images and animation so every little kb helps!
Thanks!
Vern

Problem when recording from the AUX phono output using creative x-fi elite

Hello everyone?Hopefully someone will be able to help me out here, as I've tried everything, however nothing seems to work. I am using the x-fi elite pro on a windows vista ultimate PC. When recording analogue material, from a tape Dec, for instance, I am using the creative audio console which accompanies the x-fi elite pro. I am using the aux phono input on the back of the box, and everything has gone smoothly until a few days ago. When trying to record from my tape Dec this last week, I suddenly noticed that the sound was very distauted in the left channel. Right channel was fine.Of course the first thing I checked was the level, and this was absolutely fine too, both channels were set to around 50% in the sound-options control-panel. I then checked the cable and then tried it on other equipment as well, and everything was also fine here. I then re-connected it to the audio consul, but got the same results. Fine sounding audio in the right channel, but distauted in the left. I then tryed re-installing the newest vista-driver to see if this would solve my problem, however it didn't. Now I've only got audio in the right channel, but no audio at all in the left. Has somebody inhere experienced anything simurlar, and if yes, can you please tell me what could be wrong??All the best from Allan

On certain mobo/graphics card set ups and some sound cards there is an issue with bus latency. In short while playing back audio you will hear a frequent crackling of the audio. That is not the same as the slight click the Elite pro makes when changing modes. It has been a Creative issue for many years but is only present with certain combinations of hardware. I have experienced that issue myself but several years ago. My current Elite Pro/PC set up does not have this issue.

Photo files size when importing from camera, uploading to facebook

When I import photos from my camera to iPhoto, then upload them to facebook, they are not the original size. This is my first mac and first time to use iPhoto so maybe that's normal. Is there a setting I need to change? How do I know if the files I have imported are being saved on my computer with their original specs? I am hesitant to clear the pics from my camera, fearing I might lose their original quality!

Welcome to the Apple Discussions.
As for facebook, when using my old pc the photos remained the original size after uploading. It wasn't until I used iPhoto that they began to upload in a smaller version.
Are you referring to file size as in KB or MB or image size as in pixel dimension. As Terence pointed out I doubt if Facebook will accept a full image files at the original size. Most are in the MB range and Facebook would run out of storage space in no time.
It might very well be that iPhoto will resize the pixel dimension of the photos to a "standard" size for uploading and Facebook then downsizes the actual file size. That means compressing the file to make a smaller file but not a smaller image.

Keeping images full size when uploading from "Photos" after editing

Is there any way that I can edit photos in the ”Photos” app and keep what I have edited and also keep them full size when I upload them Flickr?

Highlight the images you wish to export.
Ctrl-Shift-E to open the export dialog.
Change the top drop-down list to Hard Drive.
Choose a location for the files in the Export Location section.
Adjust file naming if necessary.
In the File Settings section make sure you have the correct output format selected and choose a quality (85 is fine for most things and keeps file size manageable).
Make file size changes as appropriate in the Image Sizing section.
If you are downsizing a lot then consider adding some output sharpening.
Click Export.
Hopefully that covers most things.

How to set text size when printi from a web page

can't increase text size when printing a web page

If you're using IE, click on View, Text Size and then whatever size you'd like. You'll see the changes on the screen and it should print out the same way.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Browser size when launched from Forms Builder

Hi, Does anyone know how to set the size of the IE browser when launched from Forms Builder? I have set the width and height setting to 100% so that the applet takes up all the browser space, however the browser is still not as large as I'd like.
When I start IE on its own, it opens in the desired size, it's only when running it from Forms Builder that it's too small. I've searched on the net, but nothing seems to work, there must be a setting specific to Forms?
Thanks
Sam

If you are using SeparateFrame = True, then you might try using these in your When-New-Form-Instance trigger:
set_window_property(forms_mdi_window, window_state, maximize);
set_window_property('Your_Main_Window', window_state, maximize);
If you are not using SeparateFrame = True, then you may have to use JavaScript in the page where your applet is located. Javascript can also go in your formsweb.cfg file. See:
HTMLbeforeForm=<script>....</script>
or
HTMLafterForm=<script>....</script>

Total newb wonders about movie size when recording from HD-cam

Similar Messages

Maybe you are looking for