Total Newbee, How to open ports 5198 and 5199 for Amateur Radio software program

I am a Amateur Radio operator using a software program called Echo Link which will enable me to talk to other radio operators around the would through repeaters running this software. I need to open ports 5198 and 5199 in my Airport Time Capsule for this software to work. How do I open these ports? They talk about mapping the ports which I don't understand. Below is a screen shot of an older version of Airport that shows what I want to do.
I tried to do it but it does not work and I can't change the private IP Address. Here is a screen shot of what I tried to do below. Thanks for any help you can provide.

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

Similar Messages

How to open ports 80 and 443

How do you open ports 80 and 443? I'm trying to connect a tv to the internet.

What router are you using? Who is your ISP? Also, what exactly are you trying to accomplish?

How to open ports 119 and 443 in my Mac?

I've been trying to use the UseNeXT software with my Mac with no success. I called their support and they told me I need to open the ports 119 and 443. I contact Apple support and they told me that is beyond their scope (???).
Can somebody help me with that? I tried to find it online, but all tutorials that i tried didn't work or are outdated.
Thanks

Hi Drew,
It probably depends on the router as to the method used to open the ports.
As I have said elsewhere in the thread the first 1024 ports are open in most router to allow things to work Out of the Box such as Mail (110, 25, 567, 569, 995, 996 and many more ) and web Browsing (port 80 mostly but secure site can use 443) FTP (21 and 22) to name some.
Port Forwarding is one way to open some of the ports for One IP (computer).
Most routers have table for doing this and this can be limited as to the number of ports included.
This Linksys pic shows how to do it for some as it allows groups based on Start and end ports. However it restricts it to one IP
DMZ is a form of Extreme Port Forwarding that opens all 65535 ports to one IP (Computer)
In both the above cases other computers (IP addresses) are excluded from using the ports.
Port Triggering doe allow multiple computers to access the same Port but requires that you know the lead - Trigger - port involved for each app.
It is limited by the table size for your particular router.
Same Router in Trigger ports for iChat 3
Most router come with UPnP nowadays.
It is an ON/Off setting that allows the apps on the computer to say which ports are needed and when.
On some you can reduce the time to live and the Hop amounts.
The ports stay open from a period of normally 30 mins after non use.
This can be changed.
It also tends to list the number of Hops (the number of devices beyond the UPnP device) that it can be heard.
My Sky Hub
I have no other router on my network but I do sometimes use Internet Sharing between two computers hence the 2 Hops.
Every other device is only one Hop away from the the router.
There are concerns that the "Advertisement" is seen upstream (internet side) as well as device downstream.
The Concern is that this could be Up to your ISP and then down to the "next" IP end user on the particular router/server at the ISP end.
I have seen no evidence of this being the case.
Hope this helps.
8:45 pm Monday; May 5, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to open ports 2078 and 2077

I can't seem to figure out how to do this.
I need it for a webdisk for my site but can't get these 2 porst to open so it can connect.
any help on how/where I go to do this?

I'm not entirely sure if you're using the Mac OS X Server or the Mac OS X client software version here, so the following covers both. Use of System Preferences implies client, though this is a server forum.
With Mac OS X Server 10.6, use the Server Admin tool to open up the ports you need. Launch Server Admin > select the target server > select Firewall > select Settings > select Services, open the ports, Save, etc.
With Mac OS X client 10.5.1 and later and with 10.6 and later, the firewall mechanisms and settings are application-based and not port-based, and you select the application to allow, and it can then use whatever ports it needs. System Preferences > Sharing > Advanced... and then the + to add the application. (Details: [ht1810|http://support.apple.com/kb/ht1810])
If you're running this box as a network gateway, then things can get a little more complex; I'd tend to use an external firewall if that's an option.
If you're running this as the client for the disk services (as I might guess) and if you're accessing a remote web disk on a remote system via ports 2077 (SSL) and 2078, then I wouldn't usually expect to need to open these ports on the client; it's usually the remote server system and not the client that needs to open ports. (Are you getting any diagnostic messages here? Are you looking to serve disks out to other hosts via this protocol? If so, and if you're on Mac OS X Client here, then try adding the application that serves the disks to the list of applications known to the firewall.)
As an alternative, Apple servers and servers from other providers can run WebDAV disk services via port 80, which means that most any server that allows http web connections can also allow WebDAV connections. (WebDAV is a built-in feature of this Apache web server, so most any Apple Mac OS X box can serve disk space using http port 80 and WebDAV.)
The lower level approach to opening the ports is the ipfw tool, and the command line.

How To Open Ports 80 And 443 In Vista.

Hi Guys Yeah I'm Trying To See That Mine's Ports Are Working Correctly Or Not Help If Any One Knows That Ports Would Might Help To Restore Your I Device May Be I Haven't Configured Mine's Pc Correctly A Lil Bit Yet So Help Me To Configure Mine's Pc Settings That Would Restore And Update Mine's I Device Using Original FW.
Thanks

What router are you using? Who is your ISP? Also, what exactly are you trying to accomplish?

Firewall in 10.5, how to open ports and how to manage?

I am pulling my hair out with the new firewall in 10.5. In 10.4 I could just set ports as I liked in the control panel, in 10.5 there is no such thing.
I need to for example open port 49999 to allow PageSender to function in my network.
I need to open port 5901 to work with JollyFast VNC, as port 5900 is used by Apple Remote Desktop and the conflict if they both use the same port.
Some of these ports I need permanent open like 59999 and others for one session and than close again, like 5901. Again in 10.4 I made the rule in the pref pane, ticked the box and Bob was your uncle. Now?
I would like to be able to see what ports are open and active on the machine. I have no idea as to where I could see this.
And at the same time I would like to keep the firewall as closed as possible as I am often on line in hotels etc.
So I need help, is there a manual somewhere someone is aware of? Or do you have any answers?

The new Application Firewall does not work in the same way as IPFW (the main firewall in 10.4).
Instead of managing ports, it simply controls the access of applications to any port. Thus, if you want PageSender to receive connections, you simply need to switch the firewall to "Set access for specific services and applications", and then add PageSender to the list, with "Allow incoming connections". When you do this, PageSender will be able to receive connections on any port that it needs to.
If you don't like this method of controlling connections, you can still use IPFW. Apple has removed the GUI, but you can download a GUI application like [NoobProof|http://www.hanynet.com/noobproof> or [WaterRoof|http://www.hanynet.com/waterroof/index.html], and you can then set access for specific ports.
There are no problems with using both IPFW and Application Firewall.
Cheers,
Rodney

How to open a page and closing source page in jdev 10.1.3.3

how to open a page and closing source page in jdev 10.1.3.3.
for example.
From page 'A' , we are opening a page 'B' and closing the page 'A'. how this can achived.Please let me know

Your question is totally not clear?
What page? a JSF page? A code editor in JDeveloper?

Don't know how to open ports

Hello.
Could someone please tell me how to open ports on my LinkSys WRV200 Wireless-G VPN Router.
Thank you.

Open up internet explorer. On the address bar type the numbers 192.168.1.1 (username is admin, password is admin as well). Go to the Firewall tab. Depending on what kind of port opening you want, you either click on the Port Triggering or Port Forwarding subtab.
If you are hosting a certain program or application, use port forwarding. If you are just simply trying to use and access it, use port triggering.

How to open .rar files and .exe files on mac

HI
I'm new user on mac and would like to know how to open .rar files and .exe files on MAC OS X
Thanks

How is this a Compressor question?
.exe is a Windows only Executable, and can't be opened on a Mac, unless you have Windows installed.
Michael Trauffer

How to open Port 85 & 37777 for NVR

I recently purchased a security camera system (Q-SEE / QC Series) for my house but the system required to have open ports 85 and 37777 to be able to view the cameras from outside the local network ie: from my computer at work.
Can someone please help me? I'm not a computer savy and I'm having a hard time to be able to accomplish this task.
Thank you in advance

Matt's pointed you in the right direction - ignore the stuff about uPNP, you just need to use AirPort Admin to configure your time capsule - setup port forwarding to forward ports 85 and 37777 to the IP address of your camera.
Use AirPort Utility to access your Time Capsule. Under the Network tab you have the configuration for the network, including port forwarding options:
Click the + button to add a port forwaring rule and add the first public port (e.g. 85) and the IP address of the camera on the LAN that it should be forwarded to:
Here I've created a rule for port 85 - I'm assuming it's using TCP, but if it's using UDP just add the port values into the UDP fields instead (or in addition to). Also set the IP address to your camera's address (which probably isn't 10.0.1.201 as above).
Rinse and repeat for port 37777

How to open port 8000 (outward)

Can someone please explain how to open port 8000 for streaming Nicecast to my (network) IceCast2 server? Thanks!

If all you are using is the inbuilt firewall then it shouldn't be blocking outward connections.

Open PR, PO and Contract for services.

Dear All,
I want to develop a report that gives the open PR, PO and Contract for services.
When user will enter the service number report will give the open PR, PO and Contract.
But for services quntity in item overview is always 1 AU.
I want to compair the quantity in item details (ESLL - MENGE).
Suppose PR is with 100 Hrs and 3 diffrent PO created for this with 25 Hrs each.
How Can I compair this.
Thanks and Regards.
Prakash

TNX

Firefox does not know how to open this address because the protocol (Sims3) with any program connects

Firefox does not know how to open this address because the protocol (Sims3) with any program connects
can you help me plz

Was the message sent from Microsoft Outlook? When you embed an image in a message in Outlook (at least up to version 2003), it creates a hidden attachment for the image and then inserts a "cid" reference to it. If the attachment gets stripped for any reason then the "cid" reference is useless: Outlook does not store the original URL or path to the image.
Edit: By the way, which webmail site has this problem?

HT4972 I am trying to update ipod touch from ios 4.3.2 to ios 6.1.3. I have it connected to my computer, and the summary in itunes indicates the update is available. However, when I click "update", it opens Windows Explorer and waits for a file name to

I am trying to update ipod touch from ios 4.3.2 to ios 6.1.3. I have it connected to my computer, and the summary in itunes indicates the update is available. However, when I click "update", it opens Windows Explorer and waits for a file name to open.

I am not at that computer now, but I did check via windows update & with the check updates menu choice in the itunes program - neither indicated a newer version of itunes is available. (it is a vista computer).
The itunes software on the computer displays my ipod & the current ios (4.3.2), and indicates a newer ios is available (6.1.3). When I choose "update", I am taken to Windows Exploer and prompted to choose a file to open. it is as if the "update" button has the incorrect code attached to it.
The ipod is working, but there are several app I would like to install, but I can't with the current ooperating system.

I downloaded a Trial version of Adobe Acrobat XI. Now the trial has runout and I've signed up for a subscription. However, my software still needs a serial number. How can I get a serial number for the installed software?

I downloaded a Trial version of Adobe Acrobat XI. Now the trial has runout and I've signed up for a subscription. However, my software still needs a serial number. How can I get a serial number for the installed software?

There is no serial number and you don't need one. What you need for a subscription is to SIGN IN within Acrobat, so it knows the subscriptions you own.

Total Newbee, How to open ports 5198 and 5199 for Amateur Radio software program

Similar Messages

Maybe you are looking for