Total Noob question: Projects

Hi good People. Just got FCE HD 3.5 and got the Lynda training video with it and I am trying to learn my way around. Can someone point me in the right direction here.
I was trying to create a new project and I did so with another project open, and it just added the new project to the old one. not realizing it at the time I opened some stuff I was working on in iMovie and of course it made a third project in the old project. So my question is. How do I separate these projects?
Anyway, now I know that you have to close the old project before you start a new one, right?

No. You can multiple projects open at the same time. You just have to be careful what your doing so the right material gets edited into the right project. A good naming convention is a good way to start, like instead of leaving the sequence name as Sequence 1, name it something, like the name of the project if nothing else.

Similar Messages

Total noob question...

Hi: I just discovered Front row after owning my iMac for 6 months !
Where can I find the FAQ for front row? I am trying to update the movie trailers that are now 6 months old...
Thanks

Try entering 'Front Row' in Finder's Help!

Noob questions...windows emulation on mac OS 10.4

getting my ibook later this week and was wondering about windows emulation. i don't have an intel processor in my ibook (obviously), so what's your recommendation for a product that runs windows on a mac? and, total noob question, do i have to buy a copy of windows? i already have windows on my dell laptop.
thanks in advance for your help.

Hello,
so, do the new macbooks have some kind of software
pre-installed that runs windows? my friends who just
got a macbook tells me he can run windows programs if
he needs to.
The MacBooks have Intel processors in them. So, no emulation is necessary. They can directly install and run Windows if they want.
The reason you need a program like Virtual PC on an iBook is because it uses a PowerPC processor which Windows cannot communicate with. And, the PowerPC Mac's architecture is completely different.
So, that means you need a program like Virtual PC to completely emulate an entire PC computer. Basically, it is a program that simulates a real computer and then translates those Intel instructions into PowerPC instructions that your iBook can understand.
There is a severe performance penalty for all this translation. The iBook G4 will not perform like a regular Windows PC. It will be much slower, and you will need to be more patient. With a G4 iBook, you could reasonably expect your performance to be comparable to a 300 MHz PC running Windows XP.
With a 1.8 GHz iMac G5 and 2 GB of RAM, I was experiencing performance comparable to a 1.3 GHz Intel Celeron system with 256 MB of RAM (which I happened to have around for comparison).
But, for more intensive tasks, the performance was more comparable to a 500 MHz system.
Anyway, back to the Intel Macs. Those machine's only need a free Apple Utility "Boot Camp" to provide the drivers and create a Windows compatible boot partition:
http://www.apple.com/bootcamp/
And, then they need Windows XP Home or Pro. That's it.
With programs like Parallels, they can run Windows inside the Mac OS (or along side it) much like you would with Virtual PC:
http://www.parallels.com/en/products/workstation/mac/
i am trying to figure out where this might be useful
in the first place.
It is useful if you need to be able to run Windows software, but don't want to buy a PC. It's more convenient to have one machine that can do everything than it is to have a Mac and a separate PC.
Feel free to ask additional questions if you have them. Or, if you like, hit solved on the post if you feel everything is answered.
But, do let me know if I can answer any additional questions or need to re-state something clearer.

Noob Question Re: Encoding to DVD

This is my first post in the adobe forums , so hello all!
I've been trolling this, and numerous other sites, hoping to understand the basic process of editing -> CD creation.
So here it begins...I am working on "work-out" video tape. The footage was shot using a Canon H10 to removable memory card. All files are .MTS, which don't pose too many challenges for my computer (i7 processor w/ 6MB memory) after the most recent PP update. Editing, adding AE, titles, graphics, or using Sound Booth is relatively painless. I have a total of (4) timelines that comprise the total video (Trailer, Intro, Instructions, and Workout). As I edited the video I'd often render what I had testing formats such as avi, MPEG2, FLV/4, Blu-Ray H.264, etc. I was amazed with the clarity and sharpness as I stayed with in the confines of 1980x1020. So I have no problems there. Once the editing, I first created a blank timeline and pulled into it the other timelines to make on timeline called "Video Complete". I dynamic linked that timeline to Encore and found out that amount of data, in that format, created a very unstable Encore - it screamed and hollered about running out of memory, etc. I watched several tutorials and found that dynamic linking the indvidual timelines gave me a much more stable Encore.
So I had the untranscoded .MTS files in Encore. I created my menu, linking the timelines, etc and built my project using the standard 720x480 (I believe) format. To say the least, I wasn't at all happy with the final product when watched on the television. Very pixalated/jagged around letters, etc.
I don't mind shopping around for the correct answer or putting my time in on research, I'd just like to know if I am on the right playing field and/or headed in the right direction.
So basically my questions are:
1) Is dynamic linking .MTS files to Encore the correct approach as opposed to rendering the .MTS files in PPro to avi or MPEG2 before bringing them into the Encore project? (Based on wanting the best DVD quality possible)
2) Transcoding settings for individual timelines should remain on automatic or should I adjust them and transcode before clicking on build project?
3) Since I was able to see MPGE2 renderings (from PPro) on my computer screen as sharp and clear, should I expect the same quality from a DVD product?
Any information would be helpful - thanks so much.
Joe

Re: Noob Question Re: Encoding to DVD
Hi, great questions:
I think this is a sound approach. MTS is short for MPEG-2 Transport Stream, so it's already MPEG-2 but will of course have to be re-transcoded for DVD to standard definition. If you want to experiment with high definition, you could try stripping the streams out of the MTS using a third party tool such as what you might find at videohelp.com - or not. Less transcoding is always better, but may not be practical. There's probably little advantage to doing this on the DVD side, but it might be worthwhile for Blu-ray? Or not.
First, try using Interpret Footage on the asset (the MTS file itself) - set it to SD Widescreen. You may need to Revert to Original if it's already transcoded. Try building another DVD and check the footage.
For the most part, yes. Of course, they will be standard definition on DVD.
Message was edited by: jbowden
Jbowden,
Thanks for the response. I will check out "Interpret Footage" on the asset of the MTS file and toggle to SD Widescreen. Will do that tonight so I can compare the two for quality.
Joe

Total noob Q: Can I run virtual machines on a MacBook Pro ?

My apologies for entering totally green, folks. My last Apple was the first Mac I bought in university, sold quickly, and preceded by a bunch of ]['s. Sadly, I have been living under a rock for 20 years, and just this year spent $200k at IBM for servers etc in a pro capacity ...
My problem is that I am not gonna buy one more piece of lame Lenovo garbage ever again, and I need a new notebook.
The time has come where I am considering the change. I'd enjoy it really, to crawl out of this shell.
Because I am a total noob, the answer to my question is probably so easy for you folks ...
I need to keep Windows for now. I need to run Linux. I need to VM a few Novell 6.5 servers as I transition them to SUSE, and I have precisely zero MacOS apps at the moment.
With this said, does it make sense to consider a fully optioned MacBook Pro to take the place of a highest-end Thinkpad, to do the above (and more), using a Virtual Machine technology ?
My first months with a Mac would probably be spent in virtual machines as I get with the program, but I really do want to get out of this situation that nobody makes a good PC anymore and the best Wintel box seems to a Mac.
I want to believe. Please help me.

check
http://www.kju-app.org/kju/
Q is a free virtual machine, and can run windows and linux. You can also install win and linux and have triple boot. For information:
http://wiki.onmac.net/index.php/TripleBoot_viaBootCamp
MacBook Pro 2.16,ibook g4 1.33 Mac OS X (10.4.8) wireless mighty mouse and 1/2 ipod nano black

Openbox noob question on menus.

I really do apologize about this insanely noob question but this is driving me up a wall.
I've read several several different resources on openbox (particularly trying to find information on the root menu)
i'm either looking in the wrong place - or I totally saw it and didn't put 2 and 2 together. *shrugs*
so, here is the dealio -
I'm trying to edit the root menu (or as I like to call it right clicky drop down thingy)
I'm running LXDE and from everything I've gathered over the last couple of days trying to tackle this
with lxde you edit the lxde-rc.xml instead of the menu or rc.xml
although after reading through it a plethora of times I noticed that it pulls off of the menu.xml as well...
*basically*
Which file do I actually edit to add stuff to the root menu?
and i've seen dozens of actual templates for editing the menu.xml and lxde-rc.xml but whenever *I* try to follow that I get a syntax error on openbox --reconfigure
and insight or even a swift kick in the ass that will land me on a site that has info that actually works would be ever so appreciated (even if its a search term - I think my problem now is that i've spent so much time looking for this one thing that I might actually be insanely over complicating this and not picking out the right information )

stlarch wrote:An easy way is to install obmenu
I can agree with that even though I'm not sure how to use that program very well. I'd rather learn how to manually edit the stuff, and not have to rely on another program
the main reason I got away from ubuntu was to be semi/forced to learn everything.
JackH79 wrote:Have you read this here as well?
I did glance at that but didn't think that was referring to the root menus...I can decifer through the xml those menu files to some extent...the stuff on freedesktop is straight crypic to me atm...but at least now I know I need to take a much closer look hehe.

Noob Question: Flowing Input Dataset Row/Record IDs Through to the Score Model Output

I've got a noob question that I'm having difficulty finding the answer to: if my input dataset contains row/record IDs and I want to flow these through to the Score Model module output but *don't* want to include this column in model training (because
it's just an arbitrary row tag), how do I go about accomplishing this?
I am able to Project Columns and eliminate the IDs entirely early in the process but then can't really determine which input row a prediction is associated with because I've lost the IDs. I'm not quite sure how to accomplish what I'm trying to do via
the Metadata Editor, either.
Surely somebody else has dealt with this same question. If the solution is implemented somewhere in a Gallery experiment that you'd like to point me at, too, that would also be just as good as a written explanation.
Thanks in advance,
Kevin

Hey Kevin!
Sorry for making this process unclear :( Azure ML has a notion of Feature Columns
(by default everything is a Feature), that is columns/variables that are intended to be treated as part of the observation vector. You can use the Metadata Editor
and (after selecting the column(s) you want), mark the column as
Fields -> Clear Feature. This will have the semantics you desire - data attached to the input data while not being used for training.
Regards,
AK

Array methods for a total noob-

Well, not exactly a total noob, I’ve got an old project
in lingo/shockwave (where I have over 10 years experience) that I
need to convert to Flash/AS3 (where I have about a week’s
experience). I’ve got the basic navigation and interface
elements working but I’m getting stuck trying to extract data
out of my primary data structure, a two dimensional array. An
example of the first few lines of the array are attached.
My first task is to write a function that can return a new
one dimensional array, brandList, that contains a unique list of
manufacturers (second element of the sub-array, or tireData[j][2])
keeping in mind that tireData is not sorted and will contain
duplicate entries for manufacturers. It seems the filter method
will be part of my solution but so far I haven’t gotten
anything to work. Anyone know of a good tutorial on the subject?

If you want the second element of the array, it is index 1,
not 2. If you want to sort the results, you can use the
Array.sort() method. If you want some code that does the
extraction, study the following, it's one possible approach:

Syncing & Streaming from the same Library? - Noob question

Good Evening - I have a silly noob question that I can't believe I can't find the answer to on my own: I have been trying to determine if it is possible to sync and stream from the same library simultaneously.
I purchased the 40GB aTV and it has been syncing just fine with my Windows iTunes. I told it not to sync a few albums I never listen to so I wouldn't have issues with other songs or movies. I am upgrading to a new iMac and I am am going to re-rip many of my existing CD's to get them into a consistent audio quality of 192 AAC or above. This is going to push my library size to well over the 40GB limit in just music, not including any movies or TV shows I choose to pull in.
The manual does not make it obvious (or I am not reading clearly) what happens to items that don't sync over - I assume they are still playable but will have to stream. Is there anyway to mark "preferred" albums or artists that should get synced and not streamed in case the iTunes library is unavailable for whatever reason?
Also, when I change libraries is the aTV going to completely re-sync even though the music is must going to be migrated?
Thanks for taking the time to answer these silly questions.

That's not quite what I was looking for.
My question remains, what happens to the items that can't be synced from my main library to my aTV? My library is just a smidge bigger than the available space on the aTV and not everything syncs over. Does that mean I won't be able to play those items not synced from my main library...
As my library grows I don't want to have to choose what does and doesn't get synced from my library by mood. For example, every year my wife buys new christmas music - right now I could exclude it and everything else gets copied over, but come thanksgiving that stuff better be there for her and I don't want to choose other music or movies to remove.
I guess I will just have to play to try it out.

Another Noobie question - readLine()

Hi all
This is another one of the extreme noob questions. I wrote a small program to read form a text file
    String NetworkLine = new String();
    try{
        FileReader inputFile = new FileReader("Test.txt"); //
        BufferedReader in = new BufferedReader(inputFile);
       try{
           while (in.readLine() != null){
            NetworkLine = in.readLine();
            System.out.println(NetworkLine);
       }catch (IOException e){
            System.err.println("Error in reading the file");
    }catch (FileNotFoundException e){
        e.printStackTrace();
    }My Test.txt is
One
Two
Three
Four
Five
Six
without the *
The output I get is
Two
Four
Six
I cannot figure out why only even no. lines are being read. I inserted a breakpoint at the line
          System.out.println(NetworkLine);This shows me that only even no. lines are being read by readLine(). Any help will be appreaciated.
Thanks
Ayesha

    String NetworkLine = new String();
    try{
        FileReader inputFile = new FileReader("Test.txt"); //
        BufferedReader in = new BufferedReader(inputFile);
       try{
           while (in.readLine() != null){ // <-- This reads a line, checks it for null ,and drops it
            NetworkLine = in.readLine(); // <-- this reads the next line
            System.out.println(NetworkLine);
       }catch (IOException e){
            System.err.println("Error in reading the file");
    }catch (FileNotFoundException e){
        e.printStackTrace();
    }So the upshot is that you print every other line.
Corrected:
    String networkLine = new String();
    try{
        FileReader inputFile = new FileReader("Test.txt"); //
        BufferedReader in = new BufferedReader(inputFile);
       try{
           while ((networkLine = in.readLine()) != null){
            System.out.println(networkLine);
       }catch (IOException e){
            System.err.println("Error in reading the file");
    }catch (FileNotFoundException e){
        e.printStackTrace();
    }

When i got my i phone they had me answer questions for security and now i went to itunes to buy something and they asked me totally different questions...so now i cant buy things from itunes..can i reset or change the questions

when i got my i phone they had me answer questions for security and now i went to itunes to buy something and they asked me totally different questions...so now i cant buy things from itunes..can i reset or change the questions

Welcome to the Apple community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go tomanage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

Noob question use dng converter or let LR convert to dng

Sorry for the noob question but I'm transitioning over to LR from aperture and I believe DNG is a good move for me. Now then, is there any advantage to using the converter over letting LR do it?

It really is the same integrated tool, yes. All the same preferences are there.
The only thing I am not aware if Lightroom can do is Extract Embedded Originals. But that's not something I'd ever do to my own RAW files.
Cheers

2 noob questions about speaker settin

. What if I don't sync the Creative speaker settings with windows control panel speaker settings?
2. What if I the speaker settings(both Creative and windows) don't match my speaker type?For example, I have only headphone connected to my Audigy 2 ZS but I set the speaker setting to 5. or whatever else. Will this improve my sound quality in games such as Battlefield 2? Am I?supposed to get the virtual 5. surround sound effect? Because I've heard that cmss upmixes stereo sound in?games to virtual 5. or 7. surround sound for headphones.
Thanks.
Message Edited by jermin on 06-24-2008 02:09 PM

Re: 2 noob questions about speaker settings?slightlys I have a slightly different set up.
I have 5. speakers that I use for movies and some games. For BF242 I use headphones because they give you an advantage as you can hear people creeping up behind. The virtual surround sound is really good with my XFi xtremeMusic.
First I don't think it matters what you select under Windows Control Panel as the Creative Console Launcher updates speaker settings in Windows. Second if you want virtual 3d with CMSS on headphones just select headphones and enable CMSS3D. Then click the 'headphone' button on the CMSS3D tab and you can test the sound - a helicopter pans around in 360 degrees.
Then in games set the software to output 5. - AFAIK. Battlefield seems to do this automatically but I can't speak for other games. I'm assuming the Audigy has the same CMSS3D tech that the XFi has.

Noob Question - PreComp Layers and Effects

I have precomposed a layer and am wondering why when I apply an effect inside the precomposed layer, it cannot be seen in the main timeline... for instance, I've created a logo on a billboard and precomposed the layer. I added it to the timeline and all is fine. Now, I tried to apply a 'vector paint' effect to a layer inside the precomp. It looks fine in the precomp, but it disappears in the main timeline. Also, I added trapcode particles inside the precomp. They do not show up in the main timeline either. Any advice would be much appreciated. Thanks to all.

I see them in the precomp but not in the main time.
Date: Mon, 29 Jun 2009 16:11:50 -0600
From: [email protected]
To: [email protected]
Subject: Noob Question - PreComp Layers and Effects
Do you see them when you clic on the "continuosly rasterize" button of your precom. it's the little "*" icon of your precomposition.
>

Total Noob - Need Advice

Hey there, I'm a total noob about Macs and I would like to know information on certain iMacs. I'm interested in getting one.
http://www.argos.co.uk/static/Product/partNumber/5082834/Trail/searchtext%3EIMAC .htm
Was looking at that, Is it a good version? And will it run high end games no problem.
Also any other information about macs, ie the Operating Software and what to expect is also welcome, always used windows, and once I get my paycheck on the 26th I'll be getting it
Thanks for ANY help.
~Jack

If you want to save few £. Visit Comet website
http://www.comet.co.uk/shopcomet/product/602450/APPLE-iMac-MB950BA?cm_mmc
On the checkout enter discount code " 6OFF " to safe extra 6%. And u can get this model for £845.06.
Remember that if you are in Uni. Or anyone u know is a student u can safe 15% on macs.
http://store.apple.com/uk/browse/home/education_routing?mco=OTY2ODQzMg
Also visit
http://www.apple.com/uk/why-mac/

Total Noob question: Projects

Similar Messages

Maybe you are looking for