Total number of RFQ's against the vendor

Hi Gurus;
              Where can i find the total number of RFQ issued against each vendor. Please mention the table or any other source from which i can find this data.
Thanks.

Did you try to find the table yourself?
its EKKO with BSTYP = 'A'

Similar Messages

  • Employee Ext no. against the vendor

    Hi Experts,
    I am fetchiung the vendor from lfa1.
    My requirenment is to get the extension number of the employee who deals with the vendor that is stored against the vendor number.
    I am not able to find any table for the above requirement, Pls suggest.
    Thanks,
    Vikas

    Hi,
    I have to created a BAPI which accepts the Vendor No. and Returns the Extention number of Employee who deal with that Vendor. This BAPI will be integrated with Webmethods.
    Based on the Vendor No. I have,  I need to find the Employee or Employees who deal with that vendor. Once, I'll get the employee. I need to get the extention no. of that employee and pass back that no . to the Webmethods.
    I am not sure which table I have to use to get the Extention Number of the  Employee.
    Hope I am clear this time.
    Thanks,
    Vikas

  • How to clear the down payment against the vendor invoice in the payment program?

    A down payment is made $25 Later an invoice is posted for $100 Now i want to Pay $75 to Vendor But the Automatic payment program  is not clearing the down payment against the vendor invoice. Could you please help how to clear the down payment against the vendor invoice in the payment program?

    Swathi,
    Need your help i have a strange situation
    1) F-48 and document posted with document no = 15..... in company code = L002 with payment block getting populated automatically
    2) F-48 and document posted with document no= 15..... in company code = Us11 without payment block and the screen does not even show payment block, I had to check this from BSEG table
    My question is
    a) How and where does this payment block is triggered through configured and how to process next steps.
    b) when I use F-48, how do we do the actual payment, is there a check printing and linking it to the KZ document or is check printing done outside the system and the KZ document type does not have any linkage.
    c) If I do FB60 for a higher amount how do we pay partial amount.
    Your response is appreciated.

  • Count total number of rows present in the schema

    Count total number of rows present in the schema including table, sequence, view
    Desirable Output
    table          Sequence     Views
    1000          20          1000

    You mean You need to count the No of Tables, View and Sequence Present in the Schema ??
    Hi Some thing like this,
    SELECT a.view_cnt AS "View Count", b.tab_cnt AS "Table Count",
           c.seq_cnt AS "Sequence Count"
      FROM (SELECT COUNT (*) view_cnt
              FROM USER_VIEWS) a,
           (SELECT COUNT (*) tab_cnt
              FROM USER_TABLES) b,
           (SELECT COUNT (*) seq_cnt
              FROM USER_SEQUENCES) cWhich give you,
    View Count      Table Count      Sequence Count
           153              878                   32Thanks,
    Shankar
    Edited by: Shankar Viji on Aug 28, 2012 3:03 AM

  • Total number of pages before generating the PDF - OMR

    Dear all,
    We are facing the following problem. We want to apply OMR (optical mark recognition) barcoding on a batch of invoices.
    Basically there are two steps in the proces:
    - Fetch the batch of invoices created during the day, let's say 1000 invoices.
    - Calculate for this batch of invoices the total number of pages per customer. 1 customer can have multiple invoices per day.
    - If the number of pages per customer > 12, remove the invoices from the total batch (1000 invoices become then 800 for example).
    - Apply OMR logic on the remaining 800.
    My question is regarding step 2. The calculation of the total number of pages per customer. Is it possible to get the total number of pages before generating the PDF? Or do we have to 'simulate' the PDF to get to this number?
    Another question I have, does anybody have experience implementing OMR using adobe forms? Any experience to share?
    Thanks for your feedback
    Simon

    Hi Philippe,
    we can only determine the page size when its already loaded with data and its published/sent by ADS.
    i.e., the no of pages increases based on the data you feed to the form which mean by the time the form/script determines the number of pages it has published dynamically data is already there. so your requirement cannot be solved in that approach.
    the next approach which I can think of is as follows.
    lets say you display the invoices data as a table in the form.
    so then lets specify the row height to .5" which mean in a form with content area size of 15" we can display 30 records.
    so in the interface or the source program count the number of records per customer if they are < (12pages X 30 records = 360) leave them as they are else remove them for the list and process the data for other customers.
    As per your other query of having OMR on the form I have no Idea, I never worked on that but if its just any other type of barcode that shouldn't have any problem.
    Hope this helps you,
    Cheers,
    Sai

  • DUNS number of our suppliers in the vendor master???

    Hi,
    We would like to store the DUNS number of our suppliers in the vendor master. It seems that an LFA1 extension is available specifically for storing the DUNS number and other D&B related data. I can not find any info on this. Can some one provide me with some info? We are on ECC6.0.
    Thanks,
    Chetan Shah

    Dear Chetan Shah,
    You can use the Business Add-Ins (BADI) VENDOR_ADD_DATA_CS and BADI VENDOR_ADD_DATA for processing enhancements in the vendor master record.
    You use the BADI VENDOR_ADD_DATA_CS to integrate your own subscreens in
    the standard dialog. You can process your own data (add-on data) on these subscreens.                                                      
    Hope this will help.
    Regards,
    Naveen.

  • How to get the total number of occurrences based on the value of a column.

    Hello everyone,
    This is the first time that I will ask question here on your forum but has been following several threads ever since. I guess that now is my turn to ask a question. So anyway here is the thing, I have a query that should return count the number of rows depending on the value of SLOT. Something like this:
    WIPDATAVALUE          SLOT             N            M
    1-2                   TRALTEST43S1     1            3
    1-2                   TRALTEST43S1     2            3
    3                     TRALTEST43S1     3            3
    4-6                   TRALTEST43S2     1            4
    4-6                   TRALTEST43S2     2            4
    4-6                   TRALTEST43S2     3            4
    7                     TRALTEST43S2     4            4-----
    As you can see above, on the SLOT TRALTEST43S1, there are three occurrences so M (Total number of occurrences) should be three and that column N should count it. Same goes with the SLOT TRALTEST43S2. This is the query that I have so far:
    SELECT DISTINCT
    WIPDATAVALUE, SLOT
    , LEVEL AS n
    , m
    FROM
      SELECT
        WIPDATAVALUE
        , SLOT
        , (dulo - una) + 1 AS m
      FROM
        SELECT
          WIPDATAVALUE
          , SLOT
          , CASE WHEN INSTR(wipdatavalue, '-') = 0 THEN wipdatavalue ELSE SUBSTR(wipdatavalue, 1, INSTR(wipdatavalue, '-')-1) END AS una
          , CASE WHEN INSTR(wipdatavalue, '-') = 0 THEN wipdatavalue ELSE SUBSTR(wipdatavalue, INSTR(wipdatavalue, '-') + 1) END AS dulo
        FROM trprinting
        WHERE (containername = :lotID OR SLOT= :lotID) AND WIPDATAVALUE LIKE :wip
    ) CONNECT BY LEVEL <= m
    ORDER BY wipdatavalue;And that it results to something like this:
    WIPDATAVALUE          SLOT             N            M
    1-2                   TRALTEST43S1     1            2
    1-2                   TRALTEST43S1     2            2
    3                     TRALTEST43S1     1            1
    4-6                   TRALTEST43S2     1            3
    4-6                   TRALTEST43S2     2            3
    4-6                   TRALTEST43S2     3            3
    7                     TRALTEST43S2     1            1-----
    I think that my current query is basing its M and N results on WIPDATAVALUE and not the SLOT that is why I get the wrong output. I have also tried to use the WITH Statement and it works well but unfortunately, our system cant accept subquery factoring.
    I know you guys will be helping out because you are all awesome. Thanks everyone
    Edited by: 1001275 on Apr 19, 2013 8:07 PM
    Edited by: 1001275 on Apr 19, 2013 8:18 PM

    Hi,
    Sorry, it's still not clear what you want.
    Are you saying that, given this table:
    CREATE TABLE trprinting
      WIPDATAVALUE       VARCHAR2(255)
    , SLOT               VARCHAR2(255)
    INSERT INTO trprinting (wipdatavalue, slot) VALUES ('1-2',  'TRALTEST43S1');
    INSERT INTO trprinting (wipdatavalue, slot) VALUES ('3',    'TRALTEST43S1');
    INSERT INTO trprinting (wipdatavalue, slot) VALUES ('4-6',  'TRALTEST43S2');
    INSERT INTO trprinting (wipdatavalue, slot) VALUES ('7',    'TRALTEST43S2');you want to produce this output:
    WIPDATAVALUE SLOT                     N          M
    1-2          TRALTEST43S1             1          3
    1-2          TRALTEST43S1             2          3
    3            TRALTEST43S1             3          3
    4-6          TRALTEST43S2             1          4
    4-6          TRALTEST43S2             2          4
    4-6          TRALTEST43S2             3          4
    7            TRALTEST43S2             4          4? If so, here's one way:
    WITH     got_numbers     AS
         SELECT     wipdatavalue
         ,     slot
         ,     TO_NUMBER ( SUBSTR ( wipdatavalue
                               , 1
                           , INSTR ( wipdatavalue || '-'
                                ) - 1
                     )          AS low_number
         ,     TO_NUMBER ( SUBSTR ( wipdatavalue
                               , 1 + INSTR ( wipdatavalue
                     )          AS high_number
         FROM     trprinting
    SELECT       wipdatavalue
    ,       slot
    ,       ROW_NUMBER () OVER ( PARTITION BY  slot
                                 ORDER BY          low_number
                        )                    AS n
    ,       COUNT (*)     OVER ( PARTITION BY  slot )     AS m
    FROM       got_numbers
    CONNECT BY     LEVEL               <= high_number + 1 - low_number
         AND     low_number          = PRIOR low_number
         AND     PRIOR SYS_GUID ()      IS NOT NULL
    ORDER BY  low_number
    ,            n
    ;Much of the complexity here is caused by storing 2 numbers in 1 VARCHAR2 column, wipdatavalue. Relational databases work best when there is no more than 1 item in any given column of any given row. This is so basic to datbase design that it is called First Normal Form. Also, numbers belong in NUMBER columns, not VARCHAR2. If you stored your data like that in the fist place, then you wouldn't need the sub-query I called got_numbers, which is about 60% of the code above. (That could be reduced by replacing SUSTR and INSTR with the less efficient REGEGP_SUBSTR.)

  • SAP MM- Trying to send RFQ's to the vendors via email.

    Hi Experts,
    User is trying to send RFQs using  Email address... But user is not able to do so....
    Please guide how to start with...
    Thanks,
    Forum shah

    Hi,
    First of all U need to maintain an e-mail address in the vendor master data, then
    define communication strategy (if not existing): SPRO > SAP Netweaver > Application Server > base setting > message control > communication strategy --> define one and assign communication method INT
    Once done, define output message on RFQ with (particular values only specified):
    Transmission method: 5
    Partner function: VN
    Communication strategy: as defined above
    At the end go in SCOT transaction and make sure tahta node INT is active with proper info. Double click on SMTP and insert:
    maximum time (30 minutes?)
    node in use marked
    MAIL host: ask syst admin
    MAIL port: ask syst admin
    Set internet: * --> to send e-mails to all domains (here U can filter)
    From SCOT u should also create a job for sending e-mail periodically; normally the output message creates record in SOST transaction (cockpit about e-mails management)  that can be processed manually or autho by job periodically,
    SCOT setting can be found in SAP note 841883 and related.
    I hope it helps,
    Cheers,
    Mik

  • Total number of DataBases on my the Server

    Can any body tell me how I find out the total number of Databases on the Server with SQL?

    Hi,
    log on as a dba and then
    select distinct owner from dba_objects;
    will show a list of all schema owners.
    or
    select owner, count(object_name) from dba_objects where object_type = 'TABLE' group by owner;
    will show a list of schema owners and the number of tables that they contain.
    Regards Michael

  • How can I tell if an RSS Feed has been updated? In Safari I can see the total number of feed updates in the menu bar. Can't figure out how to do that in Firefox.

    See question.

    You will find that the number of audiobook titles available without DRM is much smaller than the number of titles available with it. eMusic probably has the largest collection of MP3 format audiobooks, which are not wrapped in DRM, but their catalog is a pale shadow of Audible's collection.
    The source of your ire is the publishers. They are the ones who insist on DRM, rather than Apple or Audible. (Though there are also policies at those vendors, which make it difficult or impossible for authors who choose to go without DRM (such as Cory Doctorow) to offer their titles without DRM. I suspect that it’s the fault of the publication system, but who knows for sure.)
    Personally, I don't care about the DRM. Audible titles play just fine on my iPhone, and that's the only place I play them, so I never notice it. Someday that might change, and then maybe I'll be angry. But that seems low probability.

  • How can I view the total number of songs in my iTunes?

    iTunes no longer displays to the total number of songs. Also the side scroll bar has disappeared. Can anyone help?
    Thanks
    Marcia

    You can restore much of the look & feel of the previous version with these shortcuts:
    ALT to temporarily display the menu bar
    CTRL+B to show or hide the menu bar
    CTRL+S to show or hide the sidebar
    CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
    Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
    Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
    If you don't like having different coloured background & text in the Album view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
    tt2

  • How to get total number of products for the site?

    Hi,
    I want to know the total number of products available for the site. i checked in the dcs_product table, it shows 40849 unique products. is this the total number of products count which are used in the site?
    I have another table in CATA schema dcs_product_sites, when i run the CatalogMaintenanceService to populate the records in this table, getting only 26000 products. Please let me know why this difference when i run the service.
    Thanks

    dcs_product table gives all products in your catalog.
    dcs_product_site will give products for a particular site.
    If you have more than one site, then you need to query for that particular site.
    And the number of products you show also depends upon the start and end date on the products.
    And also some custom filters you have like Out of stock items etc.
    Peace
    Shaik

  • Is there a limit on the number of Key Lookups against a table in a mapping

    I'm using OWB 11.1 and have a mapping with 15 Key Lookups against the one table. When I Validate the mapping it objects to a Key Lookup not being connected, even thuogh in the mapping all the Key Lookups have been renamed to their relevant fields?
    Is there a limit to the number of key lookups against the one table?

    Thanks for the replys.
    I'm getting a validation error, so can't run the mapping. Error VLD-1108: Operator Key_LOOKUP is not properly connected.
    The issue is solved, after checking each of the Key_Lookups, one was not connected to an output. The error occurs if an output field isn't used (connected to) a table or other operator.
    Edited by: user616385 on Sep 30, 2009 7:58 PM
    Edited by: user616385 on Sep 30, 2009 8:01 PM

  • How to get the total number of pages printed in a report?

    Hi All,
    I have a requirement where I need to print a frame of fields only in the last page. Unfortunately I cannot use the 'Print Object On' property as it doesnt work in my case. So, I am planning to write a format trigger on the frame to return TRUE if the page is the last physical page. Now, I need to know how to get the total number of physical pages that will get printed in the report so that I can use this to manipulate the frame. I was planning to use the 'Total Physical Pages' built-in, but it seems like I can just use it to print in a field and I can't use this field's value anywhere in the plsql code (formula column function/format trigger) in the report. Is there anyway to get the total number of pages printed in the report which can be used in the report plsql code?
    Thanks,
    Srini.

    i found the solution, thanks

  • Field related to DUNS number in the vendor master??

    Hi,
    We would like to store the DUNS number of our suppliers in the vendor master. It seems that an LFA1 extension is available specifically for storing the DUNS number and other D&B related data. I can not find any info on this. Can some one provide me with some info? We are on ECC6.0.
    Thanks,
    Chetan Shah

    Hi
    DUNS Number----related to DUNNING
    Mapping of XI party Duns# to R3 Vendor Codes
    DUNS
    Re: HTTP Adapter and DUNS scheme - possible bug ?
    Please refer the below links for reference.
    http://en.wikipedia.org/wiki/European_Article_Number
    http://en.wikipedia.org/wiki/DUNS_NUMBER
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/40acc490-0201-0010-be97-bebc4e7eaabf (Refer frm Pg:11)
    <b>Reward points</b>
    Regards

Maybe you are looking for