Total of calculated fields
In a page-detail table report, there are several numeric fields which must be totalled at the end of the report.
Some of the fields are calculated ones, i.e. a dollar amount multiplied by a conversion rate.
The total of the calculated fields are always blank whether I run the report in DESKTOP or I run the report in PLUS.
Any suggestions?
Thank you.
Leah
HI,
Two things you should try:
a) put a to_number(nvl(field,0)) on the calculation
b) Try cell sum instead of regular sum.
Hope it will help you solve the problem
Similar Messages
-
Running total of calculated field in pivot
VERSION: ORACLE 11
TABLE:
create table chart_detail (
DIS NUMBER,
BLD_MO VARCHAR2(7),
BLD NUMBER(10),
RPLC NUMBER(10));DATA:
insert into chart_detail values (60,'2011-03',0,2);
insert into chart_detail values (150,'2011-04',10572,0);
insert into chart_detail values (120,'2011-04',26449,5);
insert into chart_detail values (30,'2011-04',0,1);
insert into chart_detail values (60,'2011-04',0,7);
insert into chart_detail values (90,'2011-04',0,9);
insert into chart_detail values (120,'2011-05',5714,0);
insert into chart_detail values (90,'2011-05',24557,1);
insert into chart_detail values (60,'2011-05',0,4);
insert into chart_detail values (30,'2011-05',0,0);
COMMIT;EXPECTED RESULTS:
2011-04 2011-05
DIS RPLC BLD TBLD IPTV RPLC BLD TBLD IPTV
30 1 0 37021 0.03 0 0 30271 0.00
60 7 0 37021 0.22 4 0 30271 0.13
90 9 0 37021 0.46 1 24557 30271 0.17
120 5 26449 37021 0.59 0 5714 5714 0.17
150 0 10572 10572 0.59 0
180 0 0
TOTAL 22 37021 5 30271 PROBLEM: I need to have a running total of IPTV like in the above example. I can get the IPTV for each DIS/bld_mo but I don't know how to get the running total of it. In the script below I just used an example where I tried summing the IPTV like was done for build. I know it can't be done that way because IPTV is a calculated field in the query but if I substitute "APR_IPTV" with the formula for IPTV I get an error that window functions aren't allowed here. I do not know a way around this. I commented out the bad piece of code.
PROBLEM SCRIPT:
WITH pivot_results AS
SELECT dis
, NVL (apr11_rep, 0) AS apr11_rep
, NVL (apr11_bld, 0) AS apr11_bld
, NVL ( SUM (apr11_bld)
OVER (ORDER BY dis DESC)
, 0
) AS apr11_tbld
, DECODE(NVL ( SUM (apr11_bld)
OVER (ORDER BY dis DESC)
, 0),0,0,ROUND(NVL(apr11_rep, 0)*1000/ NVL ( SUM (apr11_bld)
OVER (ORDER BY dis DESC)
, 0),2
)) AS apr11_iptv
, NVL ( SUM (apr11_iptv)
OVER (ORDER BY dis DESC)
, 0
) AS apr11_tiptv
, NVL (may11_rep, 0) AS may11_rep
, NVL (may11_bld, 0) AS may11_bld
, NVL ( SUM (may11_bld)
OVER (ORDER BY dis DESC)
, 0
) AS may11_tbld
, DECODE(NVL ( SUM (may11_bld)
OVER (ORDER BY dis DESC)
, 0),0,0,ROUND(NVL(may11_rep, 0)*1000/ NVL ( SUM (may11_bld)
OVER (ORDER BY dis DESC)
, 0),2
)) AS may11_iptv
, DECODE(NVL ( SUM (may11_bld)
OVER (ORDER BY dis DESC)
, 0),0,0,ROUND(NVL(may11_rep, 0)*1000/ NVL ( SUM (may11_bld)
OVER (ORDER BY dis DESC)
, 0),2
)) AS may11_tiptv
FROM chart_detail
PIVOT ( MAX (rplc) AS rep
, MAX (bld) AS bld
FOR bld_mo IN ( '2011-04' AS apr11
, '2011-05' AS may11
SELECT CASE
WHEN GROUPING (dis) = 0
THEN TO_CHAR (dis)
ELSE 'Total'
END AS dis
, SUM (apr11_rep) AS apr11_rep
, SUM (apr11_bld) AS apr11_bld
, SUM (apr11_tbld) AS apr11_tbld
, CASE
WHEN GROUPING (dis) = 0
THEN SUM (apr11_iptv)
END AS apr11_iptv
, SUM (apr11_tiptv) AS apr11_tiptv
, CASE
WHEN GROUPING (dis) = 0
THEN SUM (apr11_tpiptv)
END AS apr11_tiptv
, SUM (may11_rep) AS may11_rep
, SUM (may11_bld) AS may11_bld
, SUM (may11_tbld) AS may11_tbld
, CASE
WHEN GROUPING (dis) = 0
THEN SUM (may11_iptv)
END AS may11_iptv
FROM pivot_results
GROUP BY ROLLUP (dis)
ORDER BY pivot_results.dis
;Thank you,Hi,
So you know how to compute iptv for an individual row; the problem now is that you want to get a running total of iptv; is that it?
The problem there is that computing iptv requires an analytic function, and analytic functions can't be nested. To get the results of nesting f (g (x)), where f and g are analytic funtions, you have to compute g in a sub-query, and then use the results as the argument to f in a super-query.
Here's how to apply that to your situation:
WITH pivot_results AS
SELECT dis
-- April, 2011
, NVL (apr11_rep, 0) AS apr11_rep
, NVL (apr11_bld, 0) AS apr11_bld
, NVL ( SUM (apr11_bld)
OVER (ORDER BY dis DESC)
, 0
) AS apr11_tbld
, NVL ( 1000 * apr11_rep
/ NULLIF ( SUM (apr11_bld) OVER (ORDER BY dis DESC)
, 0
, 0
) AS apr11_iptv
-- May, 2011
, NVL (may11_rep, 0) AS may11_rep
, NVL (may11_bld, 0) AS may11_bld
, NVL ( SUM (may11_bld)
OVER (ORDER BY dis DESC)
, 0
) AS may11_tbld
, NVL ( 1000 * may11_rep
/ NULLIF ( SUM (may11_bld) OVER (ORDER BY dis DESC)
, 0
, 0
) AS may11_iptv
FROM chart_detail
PIVOT ( MAX (rplc) AS rep
, MAX (bld) AS bld
FOR bld_mo IN ( '2011-04' AS apr11
, '2011-05' AS may11
SELECT CASE
WHEN GROUPING (dis) = 0
THEN TO_CHAR (dis)
ELSE 'Total'
END AS dis
-- April 2011
, SUM (apr11_rep) AS apr11_rep
, SUM (apr11_bld) AS apr11_bld
, SUM (apr11_tbld) AS apr11_tbld
, CASE
WHEN GROUPING (dis) = 0
THEN ROUND ( SUM (SUM (apr11_iptv))
OVER (ORDER BY dis)
, 2
END AS apr11_iptv
-- May 2011
, SUM (may11_rep) AS may11_rep
, SUM (may11_bld) AS may11_bld
, SUM (may11_tbld) AS may11_tbld
, CASE
WHEN GROUPING (dis) = 0
THEN ROUND ( SUM (SUM (may11_iptv))
OVER (ORDER BY dis)
, 2
END AS may11_iptv
FROM pivot_results
GROUP BY ROLLUP (dis)
ORDER BY pivot_results.dis
;Output:
APR11 APR11 APR11 APR11 MAY11 MAY11 MAY11 MAY11
DIS _REP _BLD _TBLD _IPTV _REP _BLD _TBLD _IPTV
30 1 0 37021 .03 0 0 30271 .00
60 7 0 37021 .22 4 0 30271 .13
90 9 0 37021 .46 1 24557 30271 .17
120 5 26449 37021 .59 0 5714 5714 .17
150 0 10572 10572 .59 0 0 0 .17
Total 22 37021 158656 5 30271 96527As you can see, this is not quite what you wanted on the row where dis='150'. You asked for NULLS in the may11_rep, may11_bld and may11_iptv columns. You can get those results if you need them; just explain the rules that govern whether to display the values and when to display NULL.
The way you posted the sample data and results, and the quantity of sample data were all excellent; it really helped me find a solution. Thanks.
It would have also helped it you had explained how iptv is computed. Basically, iptv = 1000 * rep / tbld, right?
It looks like most of this code:
, DECODE(NVL ( SUM (may11_bld)
OVER (ORDER BY dis DESC)
, 0),0,0,ROUND(NVL(may11_rep, 0)*1000/ NVL ( SUM (may11_bld)
OVER (ORDER BY dis DESC)
, 0),2
)) AS may11_iptvwas a way of avoiding divide by 0 errors; it would have been helpful if you had explained that. -
Totals of calculated field w/ PL/SQL function
I have a worksheet with a numeric field that is calculated using
a registered PL/SQL function. When I add totals to the sheet, no
total appears for this column. Is this a known issue, or is
there something else going on?
Thanks,
CharlesI have the same problem. I used to work with Discoverer 4 and all the totals were there, but after the upgrade to 9.0.4 the totals for the calculated items that are based on stored procedures are gone. It has something to do with the procedures because the calculated items that do not call procedures do have the totals.
What is meant by the default setting of "Data point"? I cannot find anything like it in the administrator..... -
Totalling a calculated field in end of report
Hi I have a formula field (F087/F050) in the report Repetitive Area0 and I want to total the results of these line by line amounts in the 'End of Report'
Please can someone explain how to compose the field I need in the End of Report
Thanks
DomHi Dom,
You may use ColSum(FXXX) to get the total in the 'End of Report'.
Thanks,
Gordon -
Calculated Field to get Total Number of Records does not work
Hi,
For some reason, calculated fields aren't working in my business rule.
What I did:
In deficiency criteria, I added the calculated field "Total Val".
In conditions and calculations I chose "Grouping/Aggregation".
For Select Group Fields, I chose "Plant and Material Number".
For Aggregation Method, I chose "Count".
Result when "Apply Rule" is used:
The filtered records are still shown. The "Field Names" (names within the table such as MATNR instead of material number) are shown instead of the field labels.
I'm trying to determine the cause of this issue and how to resolve it. Does anyone have a suggestion of what it is and what can be done?Hi Arif,
Thank you for the response.
Is there a way we can further pin down the ABAP problem that is being experienced?
Best Regards,
Raphael -
New Calculated field question. Complicated I think.
I have managed to create this table from a MySQL database: http://ppbm5.com/DB-PPBM5.php
The field 'Total' is a calculated field using this SQL query:
$query_Recordset1 = 'SELECT *, `Disk I/O`+`MPEG2-DVD`+`H264-BR`+IFNULL(`MPE On`,`MPE Off`) As Total, `CPU`*`Cores` As Phys_Cores FROM `Personal_data` WHERE 1 ORDER BY (`Disk I/O`+`MPEG2-DVD`+`H264-BR`+IFNULL(`MPE On`,`MPE Off`)), `Date & Time` ASC';
So far, so good, but as you may have noticed, there is a next field called 'Rel. Perf.' which only contains blanks. And that is where my problems start.
The table is sorted by 'Total' and the first record shows these figures and field names that are relevant for my question:
Fields: 'Total' 'Disk I/O' 'MPEG2-DVD' 'H.264-BR' 'MPE On' 'MPE Off'
Values: 131, 67, 21, 37, 6, 64
In addition, I use four 'weight' figures, let's say these are 0.27 , 0.30 , 0.20 and 0.23 denoted as W1, W2, W3, W4.
First step is to calculate four temp values, using a formula like this resulting in T1, T2, T3 and T4:
T1 = W1 x Total /Disk I/O; T2 = W2 x Total/MPEG2-DVD ; T3 = W3 x Total/H.264-BR ; T4 = W4 x Total/(IFNULL(MPE On, MPE Off)
Note that this only applies to the top record and here the SUM(T1, T2, T3, T4) results in 131, equal to the Total.
The result of 100 x SUM(T1, T2, T3, T4)/ Total = 100 should be the 'Rel.Perf.' result for the top record.
Now is gets difficult. Let me call the records R1, R2, R3, ..., Rx. Now, in the previous step we have established that the figure 100 should into R1.
For R2 the result of the 'Rel.Perf.' is 100 x SUM(T1 x Disk I/O(2), T2 x MPEG2-DVD(2), T3 x (H.264-BR(2), T4 x (IFNULL(MPE on, MPE Off)))/ Total(2)
For R3 the result of the 'Rel.Perf.' is 100 x SUM(T1 x Disk I/O(3), T2 x MPEG2-DVD(3), T3 x (H.264-BR(3), T4 x (IFNULL(MPE on, MPE Off)))/ Total(3)
etcetera for all the rest of the records in the table.
A complicating factor is that the reference point of the top machine should remain fixed at 100, but when doing queries, the top machine may not be in the query results, but all the query results for the Rel.Perf. should be derived from these scores. Life would be infinitely easier if one would be certain that the top machine is fixed, but that is not the case.
Sorry to make this such a long and complicated post, but for those who have struggled through this long message, if you have any suggestions on how to make this work, I would appreciate it.
Thanks in advance.
Harm, while non is intended.
PS. I have been trying to generate a SQL query, using the following code:
$query_Recordset1 = 'SELECT *, FORMAT(`Disk I/O`+`MPEG2-DVD`+`H264-BR`+IFNULL(`MPE On`,`MPE Off`),0) As Total, FORMAT((54.661*`Disk I/O`+161.25*`MPEG2-DVD`+71.66666*`H264-BR`+645*IFNULL(`MPE On`,`MPE Off`))/129,1) As RPI,`CPU`*`Cores` As Phys_Cores FROM `Personal_data` WHERE 1 ORDER BY 54.661*`Disk I/O`+161.25*`MPEG2-DVD`+71.66666*`H264-BR`+645*IFNULL(`MPE On`,`MPE Off`), `Disk I/O`+`MPEG2-DVD`+`H264-BR`+IFNULL(`MPE On`,`MPE Off`) ASC';
For static work it is OK, but not when a new top performer submits his data.Hi William,
Per my understanding that you want to count the number of the value in the field wait which is smaller then 15, right?
I have tested on my local environment and that you can add the calculated field (Count) using the expression as below:
=IIF(Fields!wait.Value<15,1,0)
Insert an outside group row and then get the total count by using below expression:
=SUM(Fields!Count.Value)
Preview you will get the result like below:
If your problem stil exists, please try to provide some sample data and the exprect count result you want.
Any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
Problem with Math In Calculated Fields
I am calculating a group incident rate for data returned from
a query. The formula is Number of cases multiplied by 200000
divided by number of hours worked. Cases in my report is the
calculated field: calc.CaseSum (the sum of cases for the group)
Hours is calc.SumHours (the sum of hours for the group). The actual
values for these variables (for the first group are 48 and 29427171
respectively. When I create the following calculated field called
rate using the formula: (calc.CaseSum * 200000) / calc.SumHours,
Cold Fusion Generates a Runtime Error:
Invalid ColdFusion expression in report. If the expression is
a string, ensure that it is within quotes. Error: (calc.CaseSum *
200000) / calc.SumHours is not a valid ColdFusion expression.
If I use the constant value "29427171" as the divisor, the
report works albeit only for the first group. Any ideas; is this a
bug, or am I misusing the product?
Addition: I forgot to mention I am using CF8. Also this
formula worked fine as a Report Total before I introduced grouping
and modified the calculated fields to reset on the change of a
group.Sorry, I've been on another project for awhile. This problem
will certainly be a "show stopper" for me if I cannot resolve it.
As I mentioned in my original post, I used a constant in the
formula in lieu of the variable and the calculation worked. This
would suggest that CF does not have a problem with a large number.
In spite of that reasoning, I tried Tony's suggested (thanks
by the way!) with the identical outcome, only difference is the new
formula is displayed in the error message.
Tony, you also suggested that I set the variables using
CFSET... How would I do this within the report writer environment.
I had tried a similar approach: to perform half the calculation
i.e. that within the parenthesis, and assign that value to a
separate "calculated field: and then perform the rest of the
calculation on that variable with the same outcome.
I think that I may be dealing with a CF bug here, I'd like to
find a workaround... I've noticed that CF8 has a new patch, perhaps
after I apply it, I may be able to get this thing to work. I'm on
another project right now so it will be a few days before I can
test this theory, I report the result.
Should this fail, and no one can come up with a workaround, I
will report this to Adobe. -
Hi,
I am trying to add a calculated field in my power pivot table to show the percentage on the basis of 2 columns, please let me know why this is not appearing and how can i fix it.
Any other way if i can add a calculated field in the pivot table will be very helpful.
Thanks
AmanThanks KR for the response,
Yes I loaded multiple tables in the data model and using PoewrPivot ,
i have a rating column, in that i have 0,1,2,3,4,5 rating numbers and we call it "Total expected occurrence",
a single person can get same rating multiple times, if a person is getting >=4 rating no. we call it "Occurrence >= 4". now i have to find out the total
count of "Occurrence >=4" for a particular person from "Total expected occurrence" column,
once will get the net "Occurrence >=4" for everyone, it should divide
"Occurrence >=4"/ "Total expected occurrence" to take out the percentage of rating 4 for a particular person
Best Wishes,
Aman verma -
Trouble when attempting to Sum Calculated Field.
I had to create a calculated field called RI_Limit which contains static data. (Developers/DBA could not enter it into the database at this time, so this was a work around.
The calculated field is setup as such:
=iif(Fields!Location_LOCATION_NAME.Value = "a", 8, iif(Fields!Location_LOCATION_NAME.Value = "b",2, iif(Fields!Location_LOCATION_NAME.Value = "c",0, iif(Fields!Location_LOCATION_NAME.Value = "d",0, iif(Fields!Location_LOCATION_NAME.Value = "e",1, iif(Fields!Location_LOCATION_NAME.Value = "f",1, iif(Fields!Location_LOCATION_NAME.Value = "g ",0, iif(Fields!Location_LOCATION_NAME.Value = "h",0,iif(Fields!Location_LOCATION_NAME.Value = "i",4,iif(Fields!Location_LOCATION_NAME.Value = "j A",0,iif(Fields!Location_LOCATION_NAME.Value = "k",0,iif(Fields!Location_LOCATION_NAME.Value = "l",7,iif(Fields!Location_LOCATION_NAME.Value = "m",0,iif(Fields!Location_LOCATION_NAME.Value = "n", 1, iif(Fields!Location_LOCATION_NAME.Value = "o",0, iif(Fields!Location_LOCATION_NAME.Value = "p",1, iif(Fields!Location_LOCATION_NAME.Value = "q",3, iif(Fields!Location_LOCATION_NAME.Value = "r",1, iif(Fields!Location_LOCATION_NAME.Value = "s",1, iif(Fields!Location_LOCATION_NAME.Value = "t",3, iif(Fields!Location_LOCATION_NAME.Value = "u",5,iif(Fields!Location_LOCATION_NAME.Value = "v",0,iif(Fields!Location_LOCATION_NAME.Value = "w",0,"NA")))))))))))))))))))))))
and I setup a textbox with that expression and the numbers fill in correctly with its cooresponding site name.
However, when I go to sub total or total, I get a much larger number than expected. (See screenshot)
I have searched the internet on a way to calculate both the total by Location Level 2 and LOB total, but nothing that pertains to the specific issue where by calculated field contains static data. Nothing I try produces an accurate sum. Any suggestions?Hi Katherine,
Sorry for taking a few days to reply.
I tried the suggestion, but it it still not summing my calculated fields. The total row will calculate my other cells okay but not the calculated fields that I had to add to the report. When I attempted to write an expression to sum the calculated
fields I get the following error message.
The expression used for the calculated field '=sum(iif(Fields!Location_LOCATION_NAME.Value = "test", 8, iif(Fields!Location_LOCATION_NAME.Value = "test1",2, iif(Fields!Location_LOCATION_NAME.Value = "test2",0, iif(Fields!Location_LOCATION_NAME.Value = "test3",0, iif(Fields!Location_LOCATION_NAME.Value = "test4",1, iif(Fields!Location_LOCATION_NAME.Value = "test5",1, iif(Fields!Location_LOCATION_NAME.Value = "test6 ",0, Fields!Location_LOCATION_NAME.Value = "test7",0,Fields!Location_LOCATION_NAME.Value = "test8",4,Fields!Location_LOCATION_NAME.Value = "test9",0,Fields!Location_LOCATION_NAME.Value = "test10",0,Fields!Location_LOCATION_NAME.Value = "test11",7,Fields!Location_LOCATION_NAME.Value = "test12",0,Fields!))' includes an aggregate, RowNumber, RunningValue, Previous or lookup function. Aggregate, RowNumber, RunningValue, Previous and lookup functions cannot be used in calculated field expressions.
The Espression for the calculated field I am attempting to sum is the following: -
Using a "Sum" Calculated Field on a "Count" query column?
Here's my query using the Query Report Builder:
SELECT Col1, COUNT(Col1) AS Count_Column
FROM Table
GROUP BY Col1
It generates a report that lists all the values of column
"Col1" and how many times each value was used in Col1
For instance, if Col1 contained the value 'A' 12 times, 'B' 6
times, and 'C' 19 times, the report would generate this:
A - 12
B - 6
C - 19
What i need as a column footer is the total count of all the
values, which in this case 12+6+19=37
I am using a calculated field, setting the data type to
Double, the calcuation to Sum, and the perform calculation on to
'query.Count_Column'. Reset Field When is set to None.
When I run the report, it doubles the last number in the
report's Count column (19) and displays 38 on the page. I tested
this with another column and it doubled the last number in the
report as well.
How can I get it to properly Sum my Count_Column?Hi,
You need to check note 208366.1 which explains why totals can be blank. Without knowing the detail of you decode function it is hard to say what needs to be changed. Try putting a sum in front of the decode e.g.
sum(decode(period, 'Jan period', value, 0))
Hope that helps,
Rod West -
Sum calculated field in report
Hi, I have a report that groups by employee then by machine. In this report I sum several fields, but need to sum a calculated field and can't figure it out. This is the calculation:
<?( QTY_MOVED) div ( TIME +.001 ) div ( INVERSE + .001)?>
This is a total field using a field that works fine.
<?sum(current-group()/QTY_REJ)?>
How do I incorporate the calculation in the <?sum(current-group()/.............I get errors if I just put in the calculation above.
thanks!Thank you for your help. After taking your advice and getting it to work by messing around with the brackets, management has changed their mind on the calc. Now they want me to use this calculation:
SELECT EMPLOYEE, SUM(QTY_MOVED), SUM(QTY_REJ), SUM(TIME), (nvl([b]sum(QTY_MOVED),0)/nvl(sum(TIME),0))/nvl(sum(INVERSE),0) eff ,'DIRECT'
FROM VW_TIMETRACK
WHERE START_DATE >= :BEGIN
AND START_DATE <= :END
AND WORK_ORDER <> ' '
GROUP BY EMPLOYEE
to get the average. Now the weird thing is, I can get the value in toad, and I can get it to output in raw xml data, but when I try to add the eff field right next to the sum(time) field in the word form, nothing shows up. Absolutely no data. But it is in the xml. I'm using <?sum(current-group()/EFF)?> , just like I am for <?sum(current-group()/TIME)?> . I've made it text, numeric, decimal. Nothing is coming out. -
Hi,
I am using 9.0.2.39.1 and am having trouble summing up a calculated field. I have a crosstab layout like so:
MTD YTD CURRENT YR
2005 $ $ (decode function based on period)
2004 $ $ (decode function based on period)
2003 $ $ (decode function based on period)I put a grand total for MTD, YTD and Current YR, but it does not pick up the total sum for the Current Year calculated field. I then also tried a total just for the Current Year field, but it is just blank although that column has values for each row. Strangely the count/max..etc functions give me a value, just not sum. The calculation works perfectly just not the sum of it.
Any idea what I am doing wrong???Hi,
You need to check note 208366.1 which explains why totals can be blank. Without knowing the detail of you decode function it is hard to say what needs to be changed. Try putting a sum in front of the decode e.g.
sum(decode(period, 'Jan period', value, 0))
Hope that helps,
Rod West -
Bug in excel 2012/pivot/summation of calculated field
I have a calculated field (called TO) in a pivot
= if(time >= 600,1,0)
where time is a field.
I present it in 'values' with 'sum'. It shows correct values, but the sub-totals are wrong. I can send an example if you tell me where to...It's not a bug, it's a consequence of the way calculated fields work. You should read your formula as
=IF([subtotal of time in pivot table]>=600,1,0)
To calculate what you want, add a column with formulas to the source data of the pivot table.
Regards, Hans Vogelaar (http://www.eileenslounge.com) -
Dear Experts ,
I need to know in which table where the Total Value Item field is in ... because i want to use it in SQVI
Note : I searched for it in EBAN and EBKN but i didn't find it .. i think it is not stored in the table and just being calculated (Price * Quantity) in the run time .
ThanksHi ,
I think you can find the logical table for that structure table. And you can use that logical table in query.
Regards,
Zubin
Edited by: zubin on Feb 25, 2009 8:36 AM -
Calculated field in adobe forms central
Can I make a calculated field in adobe forms central? For example a field that will sum total cost.
Hi hacker413,
Thank you for posting on the Adobe forums, unfortunately this facility is not available in Adobe Formscentral.
Vikrantt Singh
Maybe you are looking for
-
My Iphone 5 and apple store experience
On the 13th of Jan I visited the Apple Store in Covent Garden. I would say it is perhaps the worst customer experience I have ever had. It has damaged my view of the apple brand as a whole. My Iphone 5 was no longer turning on when charging. It would
-
Transfering from iPod to iTunes
Hey Everyone. I understand why apple made this.. or at least I think they made this not possible. I have been stupid and sometimes will drag a song file directly to my ipod, and not the iTunes library... and now as I prepare to buy my iTouch I want t
-
Unable to reactivate Windows 7 after clean install - help!
Hi, Yesterday I formatted my C:\ drive in order to perform a fresh install of Windows 7 Home Premium. I am unsure of whether I was using 64 or 32 bit. I didn't have an install disc so borrowed a friend's retail Home Premium disc and used my OEM key
-
Revision: 15217 Revision: 15217 Author: [email protected] Date: 2010-04-05 03:43:36 -0700 (Mon, 05 Apr 2010) Log Message: Bug: BLZ-508 - If server receives message for an unknown destination it shouldn't include the destination name in the erro
-
Passing a group value to a subreport
Hi, I have 2 identical payroll reports that group by Department, then Employee. The only difference in the reports' output is that Report A runs for a specific Pay Period, and Report B runs for YTD information. Because I want to display this informa