Total of the ordered quantity in sales order
Hi
Is there any settings or functionality for the totalling of the order quantity in the sales order as the user requires to see the total number of the units of quantity of order taken and if its less they can still ask for more order from the customer so that the truck is used for its fullest capacity for transport of the materials.
thanks
AJ
Hi AJ,
In the standard system up to ERP 5.0 you could use weight and volume for aggregation. Not very useful.
In SAP ERP 5.0, there is a new functionality called "loading units".
Quick copy/paste from the release notes:
As of SAP ECC 5.00, SCM Extension (EA-SCM 500) you can use a loading unit in Dynamic Transportation Planning of the DSD Backend process. A loading unit is an additional capacity limit that limits the maximum delivery quantity of a vehicle. A loading unit is a unit of measure that is independent of the units of measure in order processing.
For aggregation purposes, the delivery quantities are converted into the loading unit using their conversion factor in the material master. The total quantity in the loading unit is calculated in the order and the delivery and displayed together with the aggregation categories. The loading unit is also shown for information purposes in the shipment as the sum of the deliveries contained in the shipment.
It says SCM Extension, but that's not APO, only an extension, so it is part of the standard system. Even if it is part of the DSD Backend, you might think of using it independently of DSD.
Best Regards,
Franck
Similar Messages
-
How to get the back order quantity for sales Order
Hi Friends,
I want to get the back order quantity for sales order . in MD04 t-code,
there is a field(MDEZ-MNG01) for Received Qty/ Required qty. But MDEZ is a structure.
I tried from MDTB table, but the table is not updated with the values in MD04.
Please guide me from which table I can get the back order Qty for sales Order
(ref: t-code MD04, MRP element = CusOrd).
Thanks,
Sagar>
VIdya Sagar wrote:
> Hi,
>
> Isn't there any difference b/n Open Sales Order and Back order??
Yes Quite Difference.
Read:
http://www.sap-img.com/sap-sd/explain-the-meaning-of-an-open-sales-order.htm
http://help.sap.com/saphelp_sbo2005asp1/helpdata/en/b6/bdb9b2f02842348c9edbe78af863c4/content.htm -
Standard report show the confirmed quantity in sales order
Hello
i'd like to know t-code for report show the confirmed quantity and the remaining quantity of sales order
For example : i create sales order with quantity (1000) and the quantity of material in storage location 600 , so i want report display the confirmed quantity ( 600) and the remaining quantity (400)
ThanksSearch the forum before posting. Check in VA05
G. Lakshmipathi -
Free goods determined in Delivery over Order Quantity in Sales Order Item
Hi Gurus,
I've a problem about using free goods determination.
First I created free goods master record with following information
ZG1010012060075 From 100 PC -> Free good ZG1040012060075 2 PC
Free goods Category = '2' (Exclusive)
Free goods delivery control = 'E' (Delivery proportional to quantity in main item)
Then I've created Sales Order with
Item 10 ZG1010012060075 4,000 PC.
Item 11 ZG1040012060075(Free good) has been automatically determined for 80 PC
Then I've splitted Item 10 into 4 deliveries. The result of free goods determine in each delivery are as follow:
Delivery#1)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#2)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#3)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#4)
Item10 ZG1010012060075 = 472 PC
item20 ZG1040012060075 = 9 PC
*Remark : Total quantity of 'ZG1040012060075'(free goods) = 92424+24 = 81 PC
(Greater than 80 PC)*
I think the system determined free goods in Delivery#4 correctly due to rounding up. But It might not be over the order quantity in Sales Order Item 11. Even though I've set the item category in delivery with Check overdelivery = 'B' (Situation rejected with an error message), the free goods are determined over order qty. BUT if I change delivery qty in delivery#4 Item20 from 9 PC -> 8 PC -> 9 PC, the error message occurred.
My point is to fix the system not determine free goods in delivery items over order quantity in sales order item.
Has anyone met this situation before? Do you have any idea about this issue?
Best Regards,
Prachya LalitnorasateDear Sai,
Thank you for your advice, but it didn't solve my problem.
I would like the system to determine free goods with proportional to main item AND In the last delivery main item delivered completely free goods must be determined equal to remaining open delivery item.
Do you have any idea about configuration/customization? -
In which table,i could find order quantity for sales order..??
In which table, i could find order quantity for sales order..??
and also in which table i could find delivery for sales order..
need help..??
Moderator message: please search.
Edited by: Thomas Zloch on Feb 23, 2012Check the table AUFM.
Give the order number in AUFNR.
For movement type 261 (GI) & 101 (GR), you can get the material document number (MBLNR), Material (MATNR), Qty (MENGE) & UoM (MEINS). -
Restricting order quantity in Sales Order
Hi Folks
I have a requirement that my material can only be ordered in multiples of 5 KG, 15 KG and 25 KG. Could you suggest how can i control the ordered quantity in sales order ? is there a standard way in SAP to do it or does it require customization.
ThanksHi
The delivery units like in the multiples of 5 like 5 or 10 or 15 can be maintained in sales org data 1 tab of the material master delivery units field
Having set this So when creating the delivery if the multiples are not properly given the system will throw a warning message message no V4 and 081
You can set this message as errr message in t code OVAH
But there is a risk involved here
If the delivery units is maintained as mutiples of 5 that is 5 ,and 10 and 15 like that in MMR sales org data 1 tab andin OVAH it set as error message V4 and 081 then if the sales order is for 21 units then the delivery will be allowed only till 20 units
So carefully lookimg at many angles this should be used
Regards
Raja -
Hi All....
When we create a sales order with reference to Quotation, then the quantity will be copied from quotation. Later on if user tries to change that quantity in sales order then it is giving a warning message......but what we need is a error message rather than a warning message....so that user will not be allowed to change quantites which are copied from quotation.
Thanks in advance....Hi Rajesh and Vinay...
Thanks for your replies.....
I went in to that of message variables but how to proceed from there...every thing is greyed out....
Regarding that user exit they want me to do this in configuration.....
The message no which i am getting for warning is V1503
Thanks in advance......
Message was edited by:
ravi chimmili -
Changing the Confirmed Quantity in Sales Order
Hi Gurus,
I have a requirement to change the confirmed quantity of the line item of the sales order. Is there any FM or BAPI that I can use? And how?
Thanks,
AndreHello,
I am having to deal with a similar issue.
The allocated quantity needs to be reset, so that the quantities can be allocated again according to the checking rule for product allocation.
This is probably not clear anymore, I am also totally confused now, so I'll add an example.
Example:
SCENARIO 1: Rejected item quantity not available to earlier order:
Assume product ABC is on a monthly allocation plan at a channel level
Available units = 100 units
Allocation plan = 50 units for Channel1, 50 units for Channel2
Assume all orders in this scenario are for one channel
1. Order 1 is entered
Qty of 40 confirmed from ATP check, confirmed from allocation check
RESULT: allocation of 40 units is consumed, available allocation = 10 units
2. Order 2 is entered
Qty of 20 confirmed from ATP check, confirmed for 10 units from allocation check
Remaining 10 units unconfirmed
RESULT: allocation of 10 is consumed, available Allocation = 0 units
Unconfirmed order quantity = 10 units
3. Order 1is rejected
line item for Qty 40 is rejected
RESULT: available allocation = 40 units
4. Order 3 is entered
Qty of 40 confirmed from ATP check, confirmed from allocation check
Allocation of 40 is consumed
RESULT: allocation of 40 is consumed, available allocation = 0
5. Rescheduling is run for this product (order creation date determines priority in the queue)
EXPECTED RESULT:
Order 2 has highest priority and would be committed for 20 units, leaving 30 units for Order 3
Order 3 Commit quantity 30, unconfirmed quantity 10
Order 1 Line item was rejected, (no committed quantity)
RESULT:
Order 2 - Commit quantity 10, unconfirmed = 10 (as available allocation 0)
Order 3 - Commit quantity 40
Order 1 - Line item was rejected
So I need to reset the allocated quantities first...
Were you able to find a solution for this? -
To POP up the open sales order quantity in Sales order
Hi gurus,
I hav a requirement that for example,I raised an order for 100 Qty and delivered 80 materials 20 is open,So when i raise an order for the same material for 50 Quantity,I need to get POP up box saying that 20 qTY IS OPEN. in Sales order.
I am an SD consultant Please assist me in doing this requirement.
Regards
Narayana
Edited by: manam narayana on Feb 6, 2008 12:08 PM
Edited by: manam narayana on Feb 6, 2008 12:30 PMHi Usha,
Thanks for ur early reply,can u make it clear for me.Like when i enter a sold to party and material in VA01,This should check the open order quantities for a particular combination of sold to party and material and POP UP a message saying that the customer has open quantities for this material,So this Open quantities i found in VBBE table.Can u please explain me in clear how can i compare the values in T.code VA01 to VBBE table and how can i get POP UP message.
Regards
Narayana
Edited by: manam narayana on Feb 6, 2008 12:15 PM -
Confirmed quantity more than the ordered quantity in sales order.
Hi All,
We have a situation wherein the confirmed quantity is more than the ordered quantity.
a.) SO was created for qty1.Two schedule lines were proposed as stock was not available.
b.) When stock came in and most probablly, when the rescheduling job calling tcode V_V2 was run, both the schedule lines were confirmed.
c.) As a result, further processing is not done by system as confirmed quantity is more than ordered quantity.
Also we noticed that double schedule line was confirmed for a another order even without the rescheduling job is run.
Can you please suggest as to why this is scenario is occuring and how we can avoid the reoccurence? Thanks in advance!!
Regards,
Jeevan PenumatsaHi Jeevan Penumatsa
Welcome to SDN forum
Generally two schedule lines will take place if stock is not available in your plant or if open orders are there for that material also. So check the stock in MMBE
.If there are any backorders then it might be getting added in the created sales order and then you might be getting in two schedule lines
Regards
Srinath -
Hi all,
In my sales order when I enter the materials and quantity in the item level it does not updates the total quantity. Can anybody give the reason for this? Is it something wrong with my document type customization?Dear Sonia Plate
Please check in Copy control -- UPDATE Document Option is updated
As per my understanding You have created sales order but unable to check Updated Qty IN MD04 ? If it is right
Run this program SDRQCR21 Then only it will be updated
please clear Your issue
Regards
venu gopal -
Minimum order quantity for sales orders
Hi,
I need to check the configuration settings where the sales orders can be blocked if the ordered quantity is less than that of minimum order quantity.
Pls threw some light on this.
Points assured
KittyDear Krishna
Go To OVAH t code
message class V4 and message no 082
Change from warning to error
The mininum order qty for a material can be set in sales org data 1 tab
If for a material mininum order qty is set to 10 and if an order is placed for anything less than 10 you will get error message straight away
No need of any userexit
With Standard customizing it is possible
This has has been tested by me recently and you too can test it
Regards
Raja -
How to reduce order quantity in sales order
hi
I have one scenario in that suppose order quantity 100
then client want to apply discount on order quantity suppose it is 25%(manually enterd)
then quantity applicable for pricing = actual order quantity (100) - quantity not applicable for pricing rate(25%) =75
then again manually enter some quantity which not applicable for pricing e.g. 5
then they apply rate on 75-5 = 70 quantity
EVEN if they delivered 100 hole quantity .
my problem is that how I can configure this pricing?
please help me
thank youHi,
1) Create a new discount condition type with Condition class Discount and Calc type Quantity.
2) Create a Alt Calc type routine in VOFM which would calculate the discount on a fix percentage as maintained in condition record.
3) Maintain condition record for the discount condition say 25%.
4) With the help of ABAPer write logic in routine to calculate total order qty and then a discount of 25% based on say PR00, etc
5) Assign the routine in pricing procedure under Alt Calculation type.
Regards,
Amit -
Change order quantity in sales order
Hi,
I have a sales order created. Now i want to change the Order qty depending on certain conditions through an ABAP Program. Can any one tell me how to change it? I tried bapi SD_SALESDOCUMENT_CHANGE ..but couldn't succeed. I tried passing field to req_qty in table ITEMS_EX and update flag in table ITEM_INX along with item number.please correct me where i went wrong?
Thanks,
Bhaskar.i stand in awe ... is such a thing legal in your country? you create a sales-order, probably sent a confirmation document (including quantities, prices and so on) to the customer and then you change the quantity according to some constructed logic?
would you care to describe what the business-process exactly demands at this stage? -
Order Quantity in Sales order feild is in Grey mode
Iam creating sales order and material is coming in grey mode... i created the material yesterday. wat might be reasons for this..
thanks
ramkiHi
Can u please the Tcode SHD0
Enter the Transaction Variant already there in the system .
Just execute it u will find all the fields .
Check if the order qty i.e KWMENG field is display only or not.
if such is the case just uncheck the field and make it mandatory and save .
This will solve ur problem.
Maybe you are looking for
-
Hi, We ae getting the below error while deploying any DC from NWDS. From the Deployment log we found this. com.sap.sdm.util.sduread.IllFormattedSduFileException: Error during attribute reading: received exception: exception during archive check: Too
-
Exporting tracks problem? Help? Big problems.....
I have a project with 14 narration tracks. I am trying to export each track seperatly. I was told all I had to was "solo" a track and export to iTunes. One by one, I did this for each track. Heres the problem. The fill size for each track is the size
-
Remove SOAP Header Element from ALSB Proxy Service Response
I've got a client of one of my ALSB Proxy services that needs the SOAP header element removed from the response. I'm struggling to find a way to do that with a WSDL-based proxy service. Do I need to change my service to an Any XML Service or is there
-
MacBook Pro Retina 2013 connecting to Presonus mixer
I bought new MacBook Pro 13" late 2013 to use it with my mixer Presonus StudioLive 16.0.2 http://www.presonus.com/products/StudioLive-16.0.2 To connect computer Presonus has firewire S400 400mb/s connection. MacBook has no firewire connection, but ha
-
HT3529 how can i send message to group
. By business reason I need usual send message to many peoples. I have prepared group with xx members and would like to send all of them one message. how can i do it easy. I can't choose group. only choose members in group. it is not comfortable. pl