Total page no in Report

Hi,
i want to total page no in my report.
I am printing total 5 page in the report so i want to print
Page 1 of 5
Page 2 of 5
' So how to print this type of msg in the report.
Please help me its very urgent......
Thanks in advance.
Kumar AT.

Hi,
Check this
* Declare a variable
DATA L_PAGE_COUNT(5) TYPE C.
* Copy this code to the end of program
* Page count will be printed on each page here
    WRITE SY-PAGNO TO L_PAGE_COUNT LEFT-JUSTIFIED.
    DO SY-PAGNO TIMES.
        READ LINE 1 OF PAGE SY-INDEX.
        REPLACE '-----' WITH L_PAGE_COUNT INTO SY-LISEL.
        MODIFY CURRENT LINE.
    ENDDO.
TOP-OF-PAGE.
    WRITE: /(70) 'Heading' CENTERED, 70 SY-PAGNO,'of ', '-----'.
aRs

Similar Messages

How to get the total pages in ALV report?

Hi guys,
Since I used page breaks can somebody please help me on how to get the total pages in ALV report?sincerely please...thanks guys.

automatic display total page.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
r

How to show total pages in a report

Hi Experts,
I have to show the pages in the formart current page/ Total pages. I am not able to claculate the total pages. Please help me and give the code.
Thanks a lot.
Krishan

The code below shows how to display the total number of pages in a report like "Page 1 of 8." However, it doesn't work if you execute the program as a background jobs.
CODE
" Declare a variable
DATA L_PAGE_COUNT(5) TYPE C.
" Copy this code to the end of program
" Page count will be printed on each page here
    WRITE SY-PAGNO TO L_PAGE_COUNT LEFT-JUSTIFIED.
    DO SY-PAGNO TIMES.
        READ LINE 1 OF PAGE SY-INDEX.
        REPLACE '-----' WITH L_PAGE_COUNT INTO SY-LISEL.
        MODIFY CURRENT LINE.
    ENDDO.
TOP-OF-PAGE.
    WRITE: /(70) 'Heading' CENTERED, 70 SY-PAGNO,'of ', '-----'.
Refer : http://www.sap-basis-abap.com/sapab007.htm

Is there a way where in i can know the total page of report?

guys, i would like to know the total page of the report, i am using vb6 calling the report using RDC .
below is the code why i am on a hurry to know the total page of the report. i just want to add a loop that will process until a number of total hasn't been reach.
    '   picImage is your report picture object name.
    If Dir("C:\Photos\182483\182483-" & oSectionGH.ReportObjects(2).Value & ".jpg") <> "" Then
        'Replace Your Picture Path Value
        Set oSectionGH.ReportObjects.Item("picture1").FormattedPicture = LoadPicture("C:\Photos\182483\182483-" & oSectionGH.ReportObjects(2).Value & ".jpg", vbLPCustom, vbLPColor)
    Else
        'Fill Blank Picture
        Set oSectionGH.ReportObjects.Item("picture1").FormattedPicture = LoadPicture("C:\Photos\182483\" & "blank.jpg", vbLPCustom, vbLPColor)
    End If
    Set oSectionGH = Nothing
as you can see. i want the vb6 go to the last line "Set oSectionGH = Nothing" as soon as the loop reached the total page. i will much more thankful, if you could modify this code for me and include the loop process.
thanks in advance..

Hi;
I think we are not sure what it is you are trying to do. Could you explain a bit more what you are looking to accomplish? Do you want a specific image to appear on different pages, or something else?
Regards,
Jonathan

Internal Server Error when Displaying Total No. of Pages in Oracle Reports

Hello all,
I've already posted an almost similar message in the Developer Tools forums but would like to post it again here since we think that this is a problem with the report server (Maybe we're missing a patch, a configuration value not set properly or resources are not enough like memory).
We're using Oracle Reports Server ver10.1.2.0.2 and we're encountering an Internal Server Error when a particular report retrieves around 10K records which displays on each page the current page and the total no of pages. When we only display the current page, the report does not encounter any error.
When we enabled the tracing options, it just showed that it encountered a Null pointer exception.
[2006/7/13 11:1:4:703] Debug 50103 (EngineImpl:EngineImpl) : CInitEngine returns 0
[2006/7/13 11:1:4:765] Exception 50125 (java.lang.NullPointerException
at oracle.reports.engine.RWEngine.init(RWEngine.java:343)
at oracle reports.engine.RWEngine.main(RWEngine.java:60)
): Internal error java.lang.NullPointerException
And according to metalink (Doc Id:315228.1), we should just remove the total pages in our report. Problem is that this isn't an option for us. The document also mentioned about something about timeouts. We have already tried setting the request timeout parameter of the HTTP server to larger values but it still doesn't solve the problem.
Is there a workaround for this?
Any help would really be greatly appreciated.

Hi All,
We really need a workaround for this error. When we enabled the tracing options, it just showed that it encountered a Null pointer exception.
[2006/7/13 11:1:4:703] Debug 50103 (EngineImpl:EngineImpl) : CInitEngine returns 0
[2006/7/13 11:1:4:765] Exception 50125 (java.lang.NullPointerException
at oracle.reports.engine.RWEngine.init(RWEngine.java:343)
at oracle reports.engine.RWEngine.main(RWEngine.java:60)
): Internal error java.lang.NullPointerException
HELP!

Print tpage number/total page number in a report with width more than 240

Dear all,
I need to display total page number as following code sample.
But I need to put it after position 240.
this program can print total page number if   it is placed at postion 239 or before.
WRITE: /234(10) 'Heading', 239 SY-PAGNO,'of ', '-----'.
Whenever I put 240 or more WRITE: /234(10) 'Heading', 240 SY-PAGNO,'of ', '-----'.
Total page num could not be displayed.
Please tell me the solution.
thanks
REPORT YPAGECOUNT NO STANDARD PAGE HEADING LINE-SIZE 276 LINE-COUNT 65.
    DATA L_PAGE_COUNT(5) TYPE C.
TOP-OF-PAGE.
WRITE : /234(10) 'PAGE', SY-PAGNO,'/ ','-----', ''.
   WRITE: /234(10) 'Heading', 239 SY-PAGNO,'of ', '-----'.
    ULINE.
START-OF-SELECTION.
Real list output takes place here
    DO 1000 TIMES.
        WRITE: / 'Line #', SY-LINNO.
    ENDDO.
Page count will be printed on each page here
    WRITE SY-PAGNO TO L_PAGE_COUNT LEFT-JUSTIFIED.
    DO SY-PAGNO TIMES.
        READ LINE 1 OF PAGE SY-INDEX.
        REPLACE '-----' WITH L_PAGE_COUNT INTO SY-LISEL.
        MODIFY CURRENT LINE.
    ENDDO.

Using Values Greater than 255 for the LINE-SIZE of a List
If you define a fixed column width greater than 255 using the LINE-SIZE addition in the REPORT or NEW-PAGEstatement, the following notes apply:
Type definitions: The type group SLIST defines the valid maximum value for the list width (SLIST_MAX_LINESIZE), and contains a type for list lines with maximum width (SLIST_MAX_LISTLINE).
Accessing the entire contents of a line: To read or modify the entire contents of a wide line, you can use the ... LINE VALUE addition in the READ LINE or MODIFY LINE statements. This is an alternative to using SY-LISEL that is independent of the attributes of the system field (since the length of SY-LISEL is 255 characters).
Horizontal lines: With extra-wide lists, the "ULINE." statement corresponds to "WRITE / SY-ULINE.". So, for example, "ULINE AT 5(300)." corresponds to "WRITE AT 5(300) SY-ULINE.".
Output length: You can use the length specification in WRITE (or ULINE) to extend the output length of an extra-wide list up to the value of LINE-SIZE. If you want to output a whole field that is longer than 255 characters, you must use this, even if the field itself is defined as longer than 255 characters.
Example
NEW-PAGE LINE-SIZE 1000.
DATA: F1(500) VALUE 'F1'.
WRITE: /      F1 COLOR COL_NORMAL. " Output with length 255
WRITE: /(500) F1 COLOR COL_NORMAL. " Output with length 500
Awrd Points if useful
Bhupal

How to show a Page Total in a Main Report that is calculated in a SubReport

Hi,
I have a Main Report and a SubReport with the detail.
The Report has several pages. I want to show a Page Total in each Page, retrieving data that is in the subreport (Detail).
I tried to use a shared variable, but the problem is that the formula fields are assigned at the end of the subreport, so I can't pass the value back (to the main report) until the last record of the subreport is printed.
I also can't show the Page Total at the subreport, because I have a particular format that I need to respect and only can be printed from the Main Report.
Is any way to do this ? At this moment, with the shared variables I'm getting 0 until the last record is printed.
Also, I can calculate the Page Total from outside Crystal Reports, do to there some fields that can grow, so I can't figure out how many record are going to be printed.
Thanks in advance!
Ariel

hello, this may depend on how the main report was actually paging...
1) do you have one group per page for example?
2) is the sub on a group footer level?
3) does the subreport use a different data set than the main report?
some suggested workarounds would be to
a) use a report header cross-tab (identical to the existing crosstab) that creates an array of values that you can access anywhere on the main report
b) place an identical cross-tab above the existing one, and suppress all of the subreport sections (not the section where the subreport sits) and then bring the value back to the main report
cheers,
jamie

How to display grand total only on the last page of my report

Hello
I need to display the grand total amount of the invoice only on the last page of every report. If the report has 1 page then the grand total will be displayed on the 1st page. If the report has 2 pages then a subtotal will be displayed on the 1st page adding up all the amounts on page 1 only, and the grand total will be displayed on the 2nd page, adding up all the amounts of page 1 and 2. If the report has 3 pages then the a subtotal will be displayed on page 1 adding up all the amounts of page 1, and another subtotal on page 2 adding up all the amounts of page 2, and the grand total are displayed on page 3 adding up the amounts of every page.
supplier amount
xx 100
yy 100
subtotal 200
page 1 of 2 --here i need to display only the total amounts of page 1
supplier amount
subtotal brought forward 200 --then i need to bring total of page 1 over to page 2
qq 300
zz 300
total 800 --here i have reached the end of the report and
need to display the grand total
page 2 of 2
--Currently i am displaying this on my report
supplier amount
xx 100
yy 100
total 800 --this one gives the problem cause it displays the grand total
---------- on page 1 of 2 even before you can see the amounts on the
next pages
page 1 of 2
supplier amount
qq 300
zz 300
total 800

put the grand total in a frame and set it to print on the last page of the enclosing object.

How to get the total page number when using Crystal Report in JSP

In my JSP, I use the class CrystalReportViewer to generate and display the report views. But this class only sypply the function to get the info of the active view.
Thus with this info, I only can get the active view's page number. How can I get the report total page number without showing the last page first?
Thanks.

Anything you do without submitting to form has to be done on the client side (ususally by JavaScript) using data which has been send already from the server.
With JavaScript you can do quite a bit. You can download tables which don't necessarilly appear on the screen, loading them into JavaScript arrays by dynamically generating javascript. Then you can pick up events like drop-box selection and use these tables to chose what you do next (e.g. preloading other fields, setting drop box content etc.).
Or, you can cause forms to be submitted when actions like a selection happen without the user clicking a button. It's generally a matter of how much data you'd need to transmit.
Another posibility is to use a Java applet, which can generate requests to the server and handle the results as it chooses. That are a number of problems with that but occasionally it's the best solution.
What you can't do is to handle user input inside a JSP. The JSP has come and gone before the user even gets to see your form.

How to know the total page number of the standard report

How to know the total page number of the standard report?
If I insert a graph, a table, or text into the end of the standard report, how to know how much space is left for the current page?

Hello Net,
Unfortunately, we do not have any VIs in LabVIEW that can figure out the number of pages of a standard report. However, with the use of ActiveX calls you can achieve this task. Here are a couple of discussion forums which discuss this:
Excel Page Numbering with ActiveX:
http://forums.ni.com/ni/board/message?board.id=170&message.id=194479&requireLogin=False
Number Pages in Word Report:
http://forums.ni.com/ni/board/message?board.id=170&message.id=162972&requireLogin=False
There is also great documentation on using ActiveX on msdn. You can search this document for page number objects. Here is a link to this:
http://msdn2.microsoft.com/en-us/library/aa223048(office.11).aspx
Please refer to these links. If you still have questions please feel free to let us know so we can assist you.
Thank you
Best Regards,
Dominic L.

How to reference the total pages in a the after-report trigger

I need to call a procedure in my after report trigger, and send the total number of pages as a parameter. However, a bind reference only applies to columns or parameters.
I have the total pages displayed on my report, I just can't reference that field in my trigger.
Does anyone have any ideas?
Here is a link to my ultimate goal.
Telling Form the number of pages in a report

If any body is curious, I found a work around in Metalink that is working for me now.
Search for Doc ID 130432.1

Can I get total number of page in 'After Report' Trigger?

Currently, I use the format trigger of a field in Margin. In the trigger, I use srw.get_page_num(page_num) to get the current page number and call a package procedure to update a record. For example, if the report has 10 pages, it will update 10 times. However, could anyone know can I use another method instead? (Get the total number of page in one, then no need to update it every page) Thank you.
(using Report 2.5)

Thanks. I know I can choose &TotalPhysicalPages in a field for displaying. But the problem is I need to update DB for that number. So I cannot refer that value of field to run a procedure in package for update the total page number in a record. Actually, this function is already done for years. (as I mentioned in my previous message) But I would like to know can I use another method to update it in one time instead. Thank you.

Which variable gives the Total Page Number in a report

Which variable of Report can give me the total number of Pages. I want this information on first page itself. I want to refer this value in pl/sql thus i want to access the value programatically, and not just show in report as Page 1 of 10.
Thanks,
Sudhanshu

This may help you! This is straight from the Help in Reports! More about this can be found by searching for Physical PAges in Reports Help!
Suppose that you want to have the page number at the top of each page of your report. Furthermore, you want the page number to be of the form "Page n of m pages":
1 Create a field named F_PAGE and set the Source property to &Physical Page Number.
2 In the Field Property Palette, set the Page Numbering property by filling out the Page Numbering dialog box as follows:
-Check Main Section and uncheck Header Section and Trailer Section because you only want to number the Main Section pages.
-Type 1 in the Start At setting.
-Type 1 in the Increment By setting.
-Type &Report under Reset At because you don't want the page numbers to reset to zero until the report is done.
3 Create a field called F_TOTPGE and set the Source property to &Total Number of Physical Pages.
4 Do either of the following:
-Hide these fields (i.e., set the Visible property to No) and reference them within boilerplate text:
Page &F_PAGE of &F_TOTPGE
-Alternatively, position F_PAGE and F_TOTPGE beside each other. Insert boilerplate to the left of F_PAGE that contains the text "Page". Insert boilerplate between F_PAGE and F_TOTPGE that contains the text "of".
null

How to retrieve total number of pages in a report of Instance - RAS SDK ?

Hello All,
Hope all is well. I am using BOXI R2 Enterprise and was wondering how to get total # of pages of an Crystal Report Instance using RAS SDK.
Thanks in advance,
Sam

How do i retrieve the total number of pages in a report-- via RAS SDK
Sincerely,
Ted Ueda

Total number of pages in Normal Report

How to display the total number of pages in normal report.
To display current page number I am using sy-pagno.
Is there any system variable to display Total numbetr of pages in normal report.
Thanks in advance.

Hi,
There is no system variable to find total no of pages but you can use the following to get that one.
Declare a variable
DATA L_PAGE_COUNT(5) TYPE C.
Copy this code to the end of program
Page count will be printed on each page here
    WRITE SY-PAGNO TO L_PAGE_COUNT LEFT-JUSTIFIED.
    DO SY-PAGNO TIMES.
        READ LINE 1 OF PAGE SY-INDEX.
        REPLACE '-----' WITH L_PAGE_COUNT INTO SY-LISEL.
        MODIFY CURRENT LINE.
    ENDDO.
TOP-OF-PAGE.
    WRITE: /(70) 'Heading' CENTERED, 70 SY-PAGNO,'of ', '-----'.
*--- End of Program
Thayalan

Total page no in Report

Similar Messages

Maybe you are looking for