Total page No.

Hello
I use report 6i, I have multiple reports run sequential,I want to get value for Total page No. from on report and insert it in table and use this value plus one as a start page for the next report . I can insert any values from oracle report to table by use DO_SQL.
Unfortunately,the function SRW.GET_PAGE_NUM are valid only in format Trigger. When use the tow function in format trigger,I got an error.
Best Regards,

Hi,
Check this
* Declare a variable
DATA L_PAGE_COUNT(5) TYPE C.
* Copy this code to the end of program
* Page count will be printed on each page here
    WRITE SY-PAGNO TO L_PAGE_COUNT LEFT-JUSTIFIED.
    DO SY-PAGNO TIMES.
        READ LINE 1 OF PAGE SY-INDEX.
        REPLACE '-----' WITH L_PAGE_COUNT INTO SY-LISEL.
        MODIFY CURRENT LINE.
    ENDDO.
TOP-OF-PAGE.
    WRITE: /(70) 'Heading' CENTERED, 70 SY-PAGNO,'of ', '-----'.
aRs

Similar Messages

Page Number - Total Page number in Blocked ALV

Hi Gurus,
I need to print the page numbers like 1 of 5 in the ALV footer. Am able to print the current page number but am unable to print the total page number in the footer of the Blocked ALV. Can any one guide me how to display the total number of pages.
Points will be awarded
Thanks
Ravi

Hi,
Please refer to the link below :
http://www.sapdev.co.uk/reporting/alv/alvgrid_events.htm
Thanks,
Sri.

Print tpage number/total page number in a report with width more than 240

Dear all,
I need to display total page number as following code sample.
But I need to put it after position 240.
this program can print total page number if   it is placed at postion 239 or before.
WRITE: /234(10) 'Heading', 239 SY-PAGNO,'of ', '-----'.
Whenever I put 240 or more WRITE: /234(10) 'Heading', 240 SY-PAGNO,'of ', '-----'.
Total page num could not be displayed.
Please tell me the solution.
thanks
REPORT YPAGECOUNT NO STANDARD PAGE HEADING LINE-SIZE 276 LINE-COUNT 65.
    DATA L_PAGE_COUNT(5) TYPE C.
TOP-OF-PAGE.
WRITE : /234(10) 'PAGE', SY-PAGNO,'/ ','-----', ''.
   WRITE: /234(10) 'Heading', 239 SY-PAGNO,'of ', '-----'.
    ULINE.
START-OF-SELECTION.
Real list output takes place here
    DO 1000 TIMES.
        WRITE: / 'Line #', SY-LINNO.
    ENDDO.
Page count will be printed on each page here
    WRITE SY-PAGNO TO L_PAGE_COUNT LEFT-JUSTIFIED.
    DO SY-PAGNO TIMES.
        READ LINE 1 OF PAGE SY-INDEX.
        REPLACE '-----' WITH L_PAGE_COUNT INTO SY-LISEL.
        MODIFY CURRENT LINE.
    ENDDO.

Using Values Greater than 255 for the LINE-SIZE of a List
If you define a fixed column width greater than 255 using the LINE-SIZE addition in the REPORT or NEW-PAGEstatement, the following notes apply:
Type definitions: The type group SLIST defines the valid maximum value for the list width (SLIST_MAX_LINESIZE), and contains a type for list lines with maximum width (SLIST_MAX_LISTLINE).
Accessing the entire contents of a line: To read or modify the entire contents of a wide line, you can use the ... LINE VALUE addition in the READ LINE or MODIFY LINE statements. This is an alternative to using SY-LISEL that is independent of the attributes of the system field (since the length of SY-LISEL is 255 characters).
Horizontal lines: With extra-wide lists, the "ULINE." statement corresponds to "WRITE / SY-ULINE.". So, for example, "ULINE AT 5(300)." corresponds to "WRITE AT 5(300) SY-ULINE.".
Output length: You can use the length specification in WRITE (or ULINE) to extend the output length of an extra-wide list up to the value of LINE-SIZE. If you want to output a whole field that is longer than 255 characters, you must use this, even if the field itself is defined as longer than 255 characters.
Example
NEW-PAGE LINE-SIZE 1000.
DATA: F1(500) VALUE 'F1'.
WRITE: /      F1 COLOR COL_NORMAL. " Output with length 255
WRITE: /(500) F1 COLOR COL_NORMAL. " Output with length 500
Awrd Points if useful
Bhupal

Is it possible to intitate total page refresh from plugin code

In 11.1.1.4 EMAIGC we are facing following issue: Target status is not getting refreshed after dependent components status change (Which will be done through through EM Plugin UI actions). This will status will be reflected only after manual refresh.
From our plugin code , after the dependent component start/stop operations we wanted to call total page refresh, is there any way to handle this?
Thanks ,
Ramadevi

In 11.1.1.4 EMAIGC we are facing following issue: Target status is not getting refreshed after dependent components status change (Which will be done through through EM Plugin UI actions). This will status will be reflected only after manual refresh.
From our plugin code , after the dependent component start/stop operations we wanted to call total page refresh, is there any way to handle this?
Thanks ,
Ramadevi

How to modify total pages in smartforms?

Hi All,
In smartform Im printing ' page of total pages' as &SFSY-PAGE& of &SFSY-FORMPAGES(3CZ)&. All are working fine. Now at last I have to print one extra page without page no. So, If the total o/p pages are 16 ( including last page) I have to show i.e
1 of 15, 2 of 15 .... 15 of 15 , and in the last pages nothing. For this Im moving SFSY-FORMPAGES to one variable and substracting one from it, but its not working, its showing as 1 of 0, 2 of 1 ... 15 of 14..
so how to decrease the total page number. I think it generates in runtime and in my smartform all windows are in one PAGE.
So how to do this ? any Idea?

Hi,
I think we can try this. Issue new page after all pages. If page less than or equal to total pages, display that, else issue new page.
/: IF &SFSY-PAGE& LE &SFSY-FORMPAGES(3CZ)& .
' page of total pages' as &SFSY-PAGE& of &SFSY-FORMPAGES(3CZ)&
/: ELSE.
/: NEW-PAGE.
/: ENDIF.

Total Page in ABAP List

Hi Experts,
I have a requirement to print: "Page XX of XX" in my ABAP List report (this report is meant to be printed).
For Current Page, I know that the system field is SY-PAGNO. But I can't find the field for Total Page. Is there anyway to print this (Total Page) since it means that we have to predict how long the report will be before we WRITE anything?
Thanks a lot,
Sam

In the first statement of ur report u'll have to reserve some lines for footer as follows:
REPORT <prg name> LINE-COUNT 25(2).
here ur list will display 23 lines of data and then 2 lines are reserved for footer.
This means that in each page u can display 23 lines of text. Now depending on number of entries in your internal table which contains data to be displayed, we can calculate the number of pages required to print the total output.
E.g: I have 62 records in my internal table, so to get the total number of pages use the following logic:
      (U can find out the number of recs in internal table dynamically using DESCRIBE stmt)
       62/23 = 2.69
       Round the result to the next integer using CEIL , so the next interger is 3.
       So ur total number of pages is 3. And u now the current page number by sy-pagno.
Hope this solves ur problem.

Is there a way where in i can know the total page of report?

guys, i would like to know the total page of the report, i am using vb6 calling the report using RDC .
below is the code why i am on a hurry to know the total page of the report. i just want to add a loop that will process until a number of total hasn't been reach.
    '   picImage is your report picture object name.
    If Dir("C:\Photos\182483\182483-" & oSectionGH.ReportObjects(2).Value & ".jpg") <> "" Then
        'Replace Your Picture Path Value
        Set oSectionGH.ReportObjects.Item("picture1").FormattedPicture = LoadPicture("C:\Photos\182483\182483-" & oSectionGH.ReportObjects(2).Value & ".jpg", vbLPCustom, vbLPColor)
    Else
        'Fill Blank Picture
        Set oSectionGH.ReportObjects.Item("picture1").FormattedPicture = LoadPicture("C:\Photos\182483\" & "blank.jpg", vbLPCustom, vbLPColor)
    End If
    Set oSectionGH = Nothing
as you can see. i want the vb6 go to the last line "Set oSectionGH = Nothing" as soon as the loop reached the total page. i will much more thankful, if you could modify this code for me and include the loop process.
thanks in advance..

Hi;
I think we are not sure what it is you are trying to do. Could you explain a bit more what you are looking to accomplish? Do you want a specific image to appear on different pages, or something else?
Regards,
Jonathan

How to get the total pages in ALV report?

Hi guys,
Since I used page breaks can somebody please help me on how to get the total pages in ALV report?sincerely please...thanks guys.

automatic display total page.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
r

Total page no in Report

Hi,
i want to total page no in my report.
I am printing total 5 page in the report so i want to print
Page 1 of 5
Page 2 of 5
' So how to print this type of msg in the report.
Please help me its very urgent......
Thanks in advance.
Kumar AT.

Hi,
Check this
* Declare a variable
DATA L_PAGE_COUNT(5) TYPE C.
* Copy this code to the end of program
* Page count will be printed on each page here
    WRITE SY-PAGNO TO L_PAGE_COUNT LEFT-JUSTIFIED.
    DO SY-PAGNO TIMES.
        READ LINE 1 OF PAGE SY-INDEX.
        REPLACE '-----' WITH L_PAGE_COUNT INTO SY-LISEL.
        MODIFY CURRENT LINE.
    ENDDO.
TOP-OF-PAGE.
    WRITE: /(70) 'Heading' CENTERED, 70 SY-PAGNO,'of ', '-----'.
aRs

How to get the total page number when using Crystal Report in JSP

In my JSP, I use the class CrystalReportViewer to generate and display the report views. But this class only sypply the function to get the info of the active view.
Thus with this info, I only can get the active view's page number. How can I get the report total page number without showing the last page first?
Thanks.

Anything you do without submitting to form has to be done on the client side (ususally by JavaScript) using data which has been send already from the server.
With JavaScript you can do quite a bit. You can download tables which don't necessarilly appear on the screen, loading them into JavaScript arrays by dynamically generating javascript. Then you can pick up events like drop-box selection and use these tables to chose what you do next (e.g. preloading other fields, setting drop box content etc.).
Or, you can cause forms to be submitted when actions like a selection happen without the user clicking a button. It's generally a matter of how much data you'd need to transmit.
Another posibility is to use a Java applet, which can generate requests to the server and handle the results as it chooses. That are a number of problems with that but occasionally it's the best solution.
What you can't do is to handle user input inside a JSP. The JSP has come and gone before the user even gets to see your form.

How to know the total page number of the standard report

How to know the total page number of the standard report?
If I insert a graph, a table, or text into the end of the standard report, how to know how much space is left for the current page?

Hello Net,
Unfortunately, we do not have any VIs in LabVIEW that can figure out the number of pages of a standard report. However, with the use of ActiveX calls you can achieve this task. Here are a couple of discussion forums which discuss this:
Excel Page Numbering with ActiveX:
http://forums.ni.com/ni/board/message?board.id=170&message.id=194479&requireLogin=False
Number Pages in Word Report:
http://forums.ni.com/ni/board/message?board.id=170&message.id=162972&requireLogin=False
There is also great documentation on using ActiveX on msdn. You can search this document for page number objects. Here is a link to this:
http://msdn2.microsoft.com/en-us/library/aa223048(office.11).aspx
Please refer to these links. If you still have questions please feel free to let us know so we can assist you.
Thank you
Best Regards,
Dominic L.

How to you reference the current page number and total pages in a script?

I'm trying write a small script to make field invisible when the current page equals the total number of pages, but with no luck.
Can anyone advise how to do this?
I've tried various ways to reference my fields, this being the most basic:
if(pageNumber == totalPages) {
continuedBase.presence = "invisible";
// pageNumber has a run time property as "Current Page Number"
// totalPages has a run time property as "Number of Pages"
// continuedBase is a text field within the same subform as pageNumber and totalPages
Thanks for any help offered.
Russell

If you are asking how to get the current page and total pages you acn use these commands:
current page ----- xfa.layout.page(this)
total pages ------ xfa.layout.pageCount()
so your code woudl look like this:
app.alert("The curent page is: " + xfa.layout.page(this));
app.aler("The total number of pages is: " + xfa.layout.pageCount());
if(xfa.layout.page(this) == xfa.layout.pageCount()) {
continuedBase.presence = "invisible";

How to get total pages from a Word Document?

I want have created a program with ABAP, It'll print the cover page with form, the detail infomation is in a word document on a file server. I want to display the total pages in the cover page, how can I do? In another word, how to calculate the pages for a word document in sap ?

I don't know how to use it. My test codes:
REPORT print_via_ole_example .
INCLUDE ole2incl .
DATA: gs_word TYPE ole2_object ,
gs_documents TYPE ole2_object ,
gs_newdoc TYPE ole2_object ,
gs_actdoc TYPE ole2_object ,
gs_application type ole2_object,
gs_document type ole2_object ,
gs_docproperty type ole2_object,
p_pages type p .
START-OF-SELECTION .
CREATE OBJECT gs_word 'WORD.APPLICATION'.
SET PROPERTY OF gs_word 'Visible' = '0' .
CALL METHOD OF gs_word 'Documents' = gs_documents.
CALL METHOD OF gs_documents 'Open'
EXPORTING #1 = 'd:\test.doc' .
CALL METHOD OF gs_word 'ActiveDocument' = gs_actdoc .
get property of gs_actdoc 'Application' = gs_application .
get property of gs_actdoc 'BuiltinDocumentProperties' = gs_docproperty .
get property of gs_docproperty 'wdPropertyPages' = p_pages.
CALL METHOD OF gs_actdoc 'PrintOut' .
CALL METHOD OF gs_documents 'CLOSE' .
CALL METHOD OF gs_word 'Quit' .
new-line.
END-OF-SELECTION.
FREE: gs_word, gs_actdoc, gs_documents, gs_newdoc .
When run it, I can not get the total pages, and winword.exe hung up, can only be terminated in Task Manager.
Could you help me to modify this test code?
Thank you .

How to Determine the "Total" Page Count on HP 2575 All-in-one printer?

Looking at how to determine the "Total" Page Count on HP 2575 All-in-one printer? I've seen directions for other HP printers but can't seem to find any for the HP 2575 All-in-one printer. I am trying to find approximately how many pages my printer has printed since I've owned it. Any help is much appreciated.

The manual says you should be able to use the Embedded Web Server to view statistics.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How to Get the Total Page Count in XML Reports?

Hi All,
we have a requirement where we have to print Page X of Y(Total Page Count of the document).
But whenever my header group resets the total count is also reseting.
for e.g.
I m getting the page 1 of 4, page 2 of 4, page 3 of 4, page 4 of 4 for my first record.
same way i am getting page 1 of 3 ,page 2 of 3, page 3 of 3 for my second record.
But the requirement is to display page 1 of 7, page 2 of 7, page 3 of 7, page 4 of 7 for the first header record.
And page 5 of 7, page 6 of 7 and page 7of 7 for the second record.
Is there any way to achieve this?
Thanks,
Sachin

You might have better luck getting an answer here:
BI Publisher

How to reference the total pages in a the after-report trigger

I need to call a procedure in my after report trigger, and send the total number of pages as a parameter. However, a bind reference only applies to columns or parameters.
I have the total pages displayed on my report, I just can't reference that field in my trigger.
Does anyone have any ideas?
Here is a link to my ultimate goal.
Telling Form the number of pages in a report

If any body is curious, I found a work around in Metalink that is working for me now.
Search for Doc ID 130432.1

Total page No.

Similar Messages

Maybe you are looking for