Total records in IT0000 company code wise - SE16N
Hello All,
I need to check the total number of records in IT0000 for employees belonging to a particular company codes or personnel area. But there shouldn't be any duplicate entry for a personnel number in the total records.
In SE16N I am able to get an entire list but not company code wise. Is there any way I can generate the total no records in each infotype, on the basis of company code or personnel areas?
Regards,
Ally
1 - If you have activated Complementary Measures, you should look at table PA0302 instead of table PA0000.
2 - As mentioned by Pedro, se16n will not allow you to get what you require in a single step. An Ad Hoc Query could probably allow you to create the report you want.
3 - Should you be able to get lists of employee numbers "on the basis of company code or personnel areas" (possibly using se16n to look at table PA0001), then you could use those lists to explore the different infotypes (tables PA0000, PA0002, PA0006, etc...) using se16n, but unless you restrict the output to the records with End Date = 31.12.9999 , you will end up with many records for each employee.
Similar Messages
-
F.01 Balance Sheet-Report to see in company code wise
Hi Experts
Goodevening
We are recently upgraded to ECC.6 version of SAP.
The issue is, when we use Tcode F.01 relating to Balance Sheet Report it is giving the result in Business Area Wise of all the assets and liabilities.
Is there any possiblility to see the report in company code wise and not the business area wise. since the same asset is displayed in different business area wise.
eg.,
21100/1011004 Gross Block - Intangible assets 647,080.00
21100/1011004 Gross Block - Intangible assets 22,048.00
21100/1011004 Gross Block - Intangible assets 2,847,283.25
21100/1011004 Gross Block - Intangible assets 92,040.00 21100/1011005 Gross Block - Plant And Machin75,258,226.67 21100/1011005 Gross Block - Plant And Machin 216,968.87
the problem is like above
now we want to see the report in lumsum, without business area wise.
pls suggest me how to get the report
thanks in advance
warm regards
kishoreDear Kishore,
While executing in F.01 give all parameters without Business Area and Execute
Apart from that if you need to additional thing go through dynamic selection in F.01.
Assign point.........thanks in Advance.
Rgds
Madhuri -
Vendor list by company code wise with Acoount group..?
Dear all
Can anybody expalin me how to get a report on vendors list by company codes wise with account group...
1.List of vendors company codes wise
2.List of vendors company codes wise with account group wise.
Thanks
sap-mm1.List of vendors company codes wise
SAP Easy accessSAP Menu-accounting-financial accounting-vendors-information system-reports for account payable accounting-master data-S_ALR_87012086-VENDOR LIST
2.List of vendors company codes wise with account group wise
MKVZ
Regards,
Indranil -
Transfer Customer Master records from one company code to another company.
hi ,
working on a rollout project ,
needed to transfer Customer Master records from one company code to another company code.
is there any sap standard BDC/T-code as in case of Vendor Master FK15,Fk16(T-CODE) .
thanks in advance.
rahul
Edited by: RAHUL SINGH on Jul 22, 2009 9:05 AMHi,
I think you should ask this question in functional consultant forum.
Thanks, -
To view the company code wise cost and profit centers
hi all,
how to know the company code wise cost centers and profit centers? and what is the transactin codes for this?
Regards,
SomaHi Soma,
Could you try Table-->CSKS. I believe it will give you the complete list of Cost Centers and the default Profit Centers along with Company Code info.
Regards
Srinivas -
Company code wise material with quantity table
Hi
I need Table for company code wise material with quantity to check 2009 stock which is issued.
thanks
Edited by: pandu123 on Aug 17, 2011 1:21 AMHi,
There is no table which shows direct relation between company code and plant, you will have to arrive at the assignment of the plants to the company code.
But you can either write a query/ report to show this relation and a report with this relation and quanity will have performance issues if you are checking for huge data.
You can refer to the query and check the quantity in the standard reports. -
Material control record missing in company code while doing migo OMSY maintained
Hi All,
for a new company code when i try to do GR using Migo getting error "Material control record missing in company code" i have maintained the OMSY periods for company.i see other answers for same question suggesting maintain OMSY recored for company code.i am getting the error even entry exist ,any help greatly appriciated,
Thanks,Check in OMS2 whether you maintained the quantity and value update settings for your plant
-
Company Code wise message processing in Service Desk Solman 4.0
Hi Guru's,
We are implementing Solution Manager 4.0 service desk with SP 15.We have got a scenario like our branches are in dubai , USA and Nepal. All these locations have multiple company codes. So our company requirement is to handle the message company code wise.
For example if the message creator is from company code 1000 then the message should go to support team belonging to same company code 1000. Is it possible to create a rule in PFAC with container company code to achievthis or is there any other method ? If creation of container is possible with company code how does the system get the company code details from Business Partner?
Please give light into this issue.
Best Regards,
SanjuMohammed,
Could you please help me as to how did u go about it.
I am having the same issue right now.
Deepak -
GR Company code wise Number Range
Dear All,
I want to know is it possible to maintain material and accounting document different number range Company Code wise?
If it is so, then explain.
Suppose Company Code 1000 -
No range 5000000000
& Company Code 2000---- No range 6000000000
Thanks \
AkshayHi,
upto my knowledge number ranges are independent of company codes. even though if you have created new document types and assigned to transaction codes these tcodes will worl independent of company code . so its not possible to have material documents on company code wise (Material document number ranges will be on client level)
regards
suleman -
Maintain company code wise Exchange rate in SAP
Dear SAP Experts,
Is there any additional configuration to maintain company code wise Exchange rates in SAP?
Awaiting for your valuable inputs......
Thanks
Madhusudhan.BHi,
Exchange rate table is not company code dependent. You can maintain, though, different exchange rate types.
Regards,
Eli -
GR Number range company code wise
Hi,
Can we do the enhancement/ user Exit / Badi for yearly GR Number range with repect to company code wise ?
If yes then please provide the details how we can move further.
Regards
RahulHello,
Company code specific number range for Material documents not possible because, The number assignment for material documents and physical inventory documents depends on the transaction/event type which is also allocated to each transaction in Inventory Management. The transaction/event types are divided into groups of number ranges. A number range interval has to be defined for each group.
You cannot change the transaction/event types. However, you can change
the number range intervals or you can allocate transaction/event types to
new groups.
Inshort, All company code will be using the same transaction event key so it will not be possible to have different number range for material docuement based on company code.
Regards
Mahesh Naik
Edit by: Mahesh Naik 19.01.2011 2.08PM -
Default document type for F-28 per company code wise.
Hi SAP Experts
My client wants to default document types per company code wise for F-28.
As per my knowledge in OBU1 is cross client and OBZO is accepting only customer invoice and credit memo but not customer payment.
Please help with possible ideas to solve this issue, including any idea relates to substitution also. Your help is appreciated.
Thanks in advance
PrathimaHi Prathima,
As mouri said it can be done only by Substitutions
Since OBZO is only for enjoy transactions
I have verified the notes aslo but there is no possibility for F-28 by company codes
Better you can use
Prerequisite
SYST-TCODE = F-28
Substitution
use Exit
Inside exit you need fetch the document type as per the companycode
to achieve this you need define one ztable with company code and document type columns
Thanks
Vishnu -
Data will be load to data target by company code wise .
Hi,
I have a requirement,"The data will be load to data target(Info Cube)by company code wise .
so any one can provide me the ABAP code.
Regards,
Venkata Sharma.Hi Sharma,
There is no problem you can do it in R/3 and also in Transfer rules.
Hope this helps
Assign points if useful
Regards,
venkat -
Cash Inflows and Outflows- company code wise, project wise etc.
Hi Gurus,
Client's requirement says they need cash inflows and cash outflows related to a company code, project wise etc. for a specified period.
What needs to be done for this requirement? Do we have to implement Cash Management and liquidity forecasting module to fulfill this requirement???
Please revert asap.
Thank YouHi
You need to setup the cash journal configuration where cash inflows and outflows will be recorded.
The path is as follows:
SPRO>Financial Accounting>Bank Accounting>Business Transactions>Cash Journal
Hope it will solve your problem.
Regards
Tapan -
Info Record - Error Message "Company Code not assigned to Country"
Hi,
I am a beginner in SAP MM.
I am trying to Create an Info Record(ME11). After enter the material, Purchase Org., and Storage Location. While saving the data error message is being displayed as "Company Code not assigned to Country".
Please let me know the reason for this error.
Thanks,
Vinod.JHi Vinod,
The error might because of few SPRO setting are missing about the Company Code, (to which your Material/ plant/ P. Org. of your Info record are assigned/ maintained)
Check whether customizing given in below link is done,
http://www.sap-img.com/financial/company-code-not-assigned-to-country.htm
Regards,
Pravin
Maybe you are looking for
-
Stock transfer between plants two steps 303-305
Dear All, We are using version SAP 4.7 we are using stock transfer scenarion between plants two steps. 303-305 source plant they will remove the stock with 303 movement in the receiving plant they will receive the goods against the 3
-
I am attempting to delete ringtones that iTunes lost when I migrated to my new mac. Each time I sync my iPhone, I get the warning that the ringtones can't be found. How can I just delete those so I can start using my new ones? Thanks, Lawrence
-
Hi Guys When I create or modify a customer in CRM to ERP is not replicated, in the outbound queue indicates CRM SYSFAIL error that says:" Gruping is not assigned and account group in IS-M". Please help my! Thank you winston
-
Is there a download URL for Linux OS? I have Creator 2_1 loaded on a Linux blade and was unable to get to the update center. After reviewing the server log I noticed the URL included ..../en/catalog_Linux_i386.xml?unique.... When accessed via a Windo
-
Hello All, Does XMII have the ability to use scanned data as input parameters on the irpt pages for mobile devices. To Elaborate: I have a simple IRPT page with a text box and a button. When the user puts in an equipment number in the text box and s