Total Result is not working properly in QA
Hi,
We have requirement to show Total No. of Employees with respect to Age Band and Total No. of Employees in the entire Organization.
We developed the reports as per the requirement to show employees in the age band <20 Years/ 21-30 Years/31-40 Years and so on by restricting No. of Employees with the dimension AGE.
<20 Years----21-30 Years-31-40 Years----->50 Years
0.00 -
754.00-- 425.00--
120.00
The query working properly in DEV, but not in QA.
This is the case with another report also, were we executing to check Total No. of Employees without any restrictions.
But, when i drill down the report with Org. Unit, it is displaying No. of Employees corresponding to each Org. Unit, but not the total Employees (Overal Result) with all the Org. Units.
We checked all the properties with respect to info objects and as well as query properties, but no luck.
Please provide any valuable suggestions.
Regards,
RAO.
Edited by: RAO on Oct 30, 2008 7:30 AM
Dear Aravindth
(.*?) means -> Select all contents from where you start and end,
For Ex. <month>(.*?)</month> then Select for start <month> and end last </month> tag.
(?) Match zero or one occurrences. Equivalent to {0,1}.
(*) Match zero or more occurrences. Equivalent to {0,}.
(+) Match one or more occurrences. Equivalent to {1,}.
(.) (Dot). Match any character except newline or another Unicode line terminator.
(.*?) means -> Zero or more times Match any character except newline or another Unicode line terminator + Match zero or more occurrences. Equivalent to {0,}.+Match zero or one occurrences. Equivalent to {0,1}.
Could you please refere the below cite :
http://www.javascriptkit.com/jsref/regexp.shtml
Thanks & Regards
T.R.Harihara SudhaN
Similar Messages
-
Continue Button on Quiz Results Slide NOT Working Properly
I'm experiencing a functionality issue with the "Continue"
button on the Quiz Results slide:
Situation 1: After initially completing the quiz, I need to
click the "Continue" button on the Quiz Results slide only once to
advance to the next (and last) slide in the quiz movie. This is
fine & works as I would expect.
Situation 2: After initially completing the quiz, if instead
I choose to review the quiz, later when I get to the Quiz Results
slide, I need to click the "Continue" button TWICE to advance to
the next (and last) slide in the quiz movie. This does NOT work as
I would expect.
Any idea why only 1 click is needed in the Situation 1 while
2 clicks are needed in Situation 2? Any way to fix Situation 2 so
that only 1 click is needed?
Thanks much!CapManZ,
Whether the Continue button on the Quiz Results slide
requires one or two clicks is mysterious indeed. See
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=464&threadid =1302278
for another discussion about its misbehavor.
Actually, the number of clicks required depends on how long
you wait after the Quiz Results slide appears, prior to clicking
the Continue button. In your situation 1 you probably answered
questions rather than using the skip button, so you viewed the
question slides for a while prior to arriving at results. In your
situation 2 you probably used the Skip button to zip through the
slides to return to the results screen. Try this. In situation 2,
when you get to the Quiz Results slide, instead of clicking the
Continue button, go get a cuppa joe and then see if a single click
will work. If so please let me know.
I've experimented with a Captivate 2 multiple choice quiz in
a slide show that contained only 10 questions and the Results
slide. I added a text caption with fade in and fade out enabled
(the default) to the Results slide. I found that after the caption
fades in, one click on the continue button advances the slide. So I
used the caption's appearance to help measure the timing.
In the tests below I skipped as rapidly as possible, pausing
at various slides to see how it affected the single click
threshold.
Skip all slides: 28 sec
View slide 1 for 60 sec and then skip: 28 sec
Skip to slide 5, pause 30 sec, and then skip: 13 sec
Skip to slide 10, pause 30 sec, and then skip: 2-3 sec
Answer each slide (took more than 30 sec): 2-3 sec
Skip all slides, click Continue as fast as possible: 2-3 sec
I also reduced the number of question slides in the quiz and
skipped all slides.
7 questions: 18 sec
3 questions: 7 sec
I believe the threshold value (the duration required before
clicking the Continue button advances to the next slide) is
composed of two durations which add together to determine the
threshold. The Result's slide's timeline probably sets the
threshold's lower limit. Clicks prior to 3 seconds are ignored.
Time per slide and number of slides left to go sets the upper limit
for the threshold. The slower the movement, the lower the
threshold.
Several conclusions:
This probably isn't a situation in which the first click is
ignored. Instead the first click reduces the threshold's value to
the lower limit. The second click would then typically occur after
3 additional seconds, particularly if the user is surprised that
the first click didn't work and pauses slightly. A very fast
additional click on the Continue button is ignored as well.
Long quizzes will cause more complaints about the issue
because of what you experienced. It typically takes longer to
answer the quiz than review it.
Perhaps there's a workaround that would alert the user that
the Continue button is ready for clicking. I'm thinking that since
the text caption fade-in coincides with being ready to continue, an
image or the like might do the trick. Any suggestions out there?
Humm, a better alternative might be to show some images of
snacks on the results slide background. Through suggestive selling,
the user realizes it's time for a break and clicks Continue after
returning with that cuppa joe. And the sound you hear? It's the
Captivate developers giggling if they read my conclusions. Too bad
they're mum, since some real info might make it easier to make
Captivate behave. Ah well.
Phil -
I hit this problem at a customer site and can re-produce it in a simple lab. Lab environment: servers:
1x Server 2012 R2 DC and DNS server - DC1 - 10.0.0.1
1x Server 2012 R2 DirectAccess (DA) server - DA1 - 10.0.0.100
Servers are running "Update" (KB2919355) and following DA hotfixes:
KB2929930
KB2966087
I configured DA (via advanced wizard) as follows:
DA and remote access
AD group
directaccess-webprobehost DNA (A) record pointing to 10.0.0.100
behind an edge device (with a single network adapter)
SSL certificate from enterprise root CA issued to directaccess.contoso.com
NLS on remote server using https://nls.corp.contoso.com
DNS: corp.contoso.com = 10.0.0.1; nls.corp.contoso.com = ""
DNS suffix search list = corp.contoso.com
The DNS server validates successfully in the configuration UI.
With this configuration, I get a static IPv6 address of fd79:7a37:cbd9:3333::1/128 assigned to the NIC
The operations status is all green apart from DNS which displays the following error:
"DNS: Not Working Properly"
Error:
None of the enterprise DNS servers fd79:7a37:cbd9:7777::a00:1 used by DirectAccess clients for name resolution are responding. This might affect DirectAccess client connectivity to corporate resources.
Causes:
Enterprise DNS servers fd79:7a37:cbd9:7777::a00:1 are not responding.
I can, however ping fd79:7a37:cbd9:7777::a00:1 (which is the DNS64 translation of 10.0.0.1)
I would like to know what checks are failing as there are no failures in Event Viewer.
I have come across forums where people have the same issue and fix it by specifying the local IP (in this case 10.0.0.100) as the DNS server, however Richard Hicks has confirmed with me that the DNS server should be set to the DNS server, not the DA server's
IP.Thanks for the post Matt,
ISATAP has been disabled on my DA server, so the results of a "ROUTE PRINT -6" command yields:
===========================================================================
Interface List
12...00 15 5d 01 03 64 ......Microsoft Hyper-V Network Adapter
1...........................Software Loopback Interface 1
14...00 00 00 00 00 00 00 e0 IPHTTPSInterface
===========================================================================
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
12 261 fd79:7a37:cbd9::/48 On-link
14 306 fd79:7a37:cbd9:1000::/64 On-link
14 306 fd79:7a37:cbd9:1000::/128 On-link
14 306 fd79:7a37:cbd9:1000::1/128 On-link
14 306 fd79:7a37:cbd9:1000::2/128 On-link
14 306 fd79:7a37:cbd9:1000:814c:28be:46b5:52c1/128 On-link
12 261 fd79:7a37:cbd9:3333::1/128 On-link
12 261 fd79:7a37:cbd9:7777::/96 On-link
12 261 fe80::/64 On-link
14 306 fe80::/64 On-link
12 261 fe80::20c0:e848:d304:9f01/128 On-link
14 306 fe80::814c:28be:46b5:52c1/128 On-link
1 306 ff00::/8 On-link
12 261 ff00::/8 On-link
14 306 ff00::/8 On-link
===========================================================================
Persistent Routes:
If Metric Network Destination Gateway
0 4294967295 fd79:7a37:cbd9:1000::/64 On-link
0 4294967295 fd79:7a37:cbd9::/48 On-link
0 4294967295 fd79:7a37:cbd9:7777::/96 On-link
=========================================================================== -
We have migrated one application from .net framework 1.0 to .net framework 2 (from Visual studio 2003 to Visual STUDIO 2005). Now after migration we are facing some problem related to the sum function in Crystal report 10. It is not working properly.
So we migrated to Crystal report XI release 2 (though still using evaluation version for testing purpose), the problem is not yet resolved.
The problem we are facing is while using the summary in the group field, it is showing the number of rows instead of the sum of the values.
We have checked the same with min-max functions, and it is working properly with those.
We have tried to make the sum by formula field. In such case, it is not showing any syntactical error but at execution time, it is throwing an error saying "A number field or currency amount field is required here".
In the the report the datatype of the field on which we are applying the sum function, is number, and in the table from where the data is fetched, the datatype is numeric(9,6).
Any idea why sum function is not working ?
I was browsing the net and saw running totals can be a work around for such summation issues in Crystal Report XI.
Can you please provide insight of how to implement running totals for summation purpose in solving such issues.Hi,
Running totals are more accurate than Summary Totals in Crystal. Why? ...ask Crystal. Anyway, just right click on Running Totals, create a new one, and enter you fields, etc. For group totals, it gives you a place to reset the totals for each group, etc. Pretty self explainatory.
Jim -
Sum function not working properly in Crystal XI. Its showing total count of the values
We have migrated one application from .net framework 1.0 to .net framework 2 (from Visual studio 2003 to Visual STUDIO 2005). Now after migration we are facing some problem related to the sum function in Crystal report 10. It is not working properly.
So we migrated to Crystal report XI release 2 (though still using evaluation version for testing purpose), the problem is not yet resolved.
The problem we are facing is while using the summary in the group field, it is showing the number of rows instead of the sum of the values.
We have checked the same with min-max functions, and it is working properly with those.
We have tried to make the sum by formula field. In such case, it is not showing any syntactical error but at execution time, it is throwing an error saying "A number field or currency amount field is required here".
In the the report the datatype of the field on which we are applying the sum function, is number, and in the table from where the data is fetched, the datatype is numeric(9,6).
Any idea why sum function is not working ?
I was browsing the net and saw running totals can be a work around for such summation issues in Crystal Report XI.
Can you please provide insight of how to implement running totals for summation purpose in solving such issues.Are you seeing this happen in the Crystal designer as well, outside of any .NET application?
-
Undo is not working properly (grayed out)
Undo is not working properly in Indesign CC 9.2. I am using a 17" MBP running OSX 10.9.1.
Processor: 2.2 GHz Intel Core i7
Memory: 4GB 1333 MHz DDR3
I ran into this issue doing a publication layout. I was not doing anything overly complicated. Copying/pasting, placing images, adding text boxes, copying/pasting text boxes. It seems to happen without rhyme or reason.
I know that is not helpful for troubleshooting so I was able to isolate the problem. Here is how to recreate it.
Open new doc (standard letter)
Create text box with random text
copy the text box (cmd C)
paste the text box (cmd V)
move the resulting text box using selection tool (V)
select NEW text box (selection tool)
copy the NEW text box (cmd C)
paste the NEW text box (cmd V)
move the text box (selection tool).
Repeat until there are 5 text boxes (at least).
Undo the various actions after placing and moving the 5 text boxes.
I cannot undo back to a "new document."
In some cases I can only undo 2 actions before "undo" becomes grayed out, and in some cases, I can undo up to 9 or 10 actions before it gets grayed out.
Other programs running:
Illustrator
Photoshop
Text Edit
MS Word 2011
Excell 2011
Messages
Chrome
Finder
Fetch (FTP software)
I need to have these programs running simultaneously in many cases and have done so successfully in the past. I have a feeling it might be a memory issue, but I have not seen a similar post and I never had the issue with CS5 running with an identical setup. I was able to undo actions up until my previous save in CS5 sometimes 25-30 actions.I unplugged the USB items and the problem still persisted so it is not related to any of those.
I shut down InDesign and tried reopening. InDesign crashed at reopen. I have provided the log below. Hopefully this shows where the problem is occurring.
Process: Adobe InDesign CC [3814]
Path: /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Adobe InDesign CC
Identifier: com.adobe.InDesign
Version: 9.2.0.69 (9200)
Code Type: X86-64 (Native)
Parent Process: launchd [172]
Responsible: Adobe InDesign CC [3814]
User ID: ***
Date/Time: 2014-01-27 11:58:37.300 -0800
OS Version: Mac OS X 10.9.1 (13B42)
Report Version: 11
Anonymous UUID: ********************
Sleep/Wake UUID: *********************
Crashed Thread: 8
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
abort() called
*** error for object 0x6180002737c0: Heap corruption detected, free list canary is damaged
Thread 0:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x00007fff8af44622 __open_nocancel + 10
1 libsystem_c.dylib 0x00007fff8fa09c9b __opendir2$INODE64 + 59
2 com.apple.CoreFoundation 0x00007fff8d160d4a _CFIterateDirectory + 74
3 com.apple.CoreFoundation 0x00007fff8d1636b3 _CFBundleCopyInfoDictionaryInDirectoryWithVersion + 627
4 com.apple.CoreFoundation 0x00007fff8d16331d CFBundleGetInfoDictionary + 141
5 com.apple.CoreFoundation 0x00007fff8d15fb5b _CFBundleCreate + 827
6 com.apple.CoreFoundation 0x00007fff8d1a3e89 _CFBundleEnsureBundleExistsForImagePath + 89
7 com.apple.CoreFoundation 0x00007fff8d24bb93 _CFBundleEnsureAllBundlesUpToDateAlreadyLocked + 67
8 com.apple.CoreFoundation 0x00007fff8d1a3bf8 CFBundleGetBundleWithIdentifier + 248
9 com.adobe.InDesign.AWS 0x000000011667d2bc 0x116676000 + 29372
10 com.adobe.InDesign.AWS 0x000000011667a577 0x116676000 + 17783
11 com.adobe.InDesign.AWS 0x000000011667a370 0x116676000 + 17264
12 com.adobe.InDesign.AWS 0x00000001166772a7 0x116676000 + 4775
13 com.adobe.InDesign.AWS 0x0000000116683fb0 0x116676000 + 57264
14 com.adobe.InDesign.AWS 0x000000011668472e 0x116676000 + 59182
15 com.adobe.InDesign.AWSUI 0x0000000116646597 0x116636000 + 66967
16 com.adobe.InDesign.AWSUI 0x0000000116645f05 0x116636000 + 65285
17 com.adobe.InDesign.AppFramework 0x000000010d6739bb 0x10d632000 + 268731
18 ObjectModelLib.dylib 0x0000000104b2fcd3 0x104b10000 + 130259
19 ObjectModelLib.dylib 0x0000000104b4306c 0x104b10000 + 209004
20 ObjectModelLib.dylib 0x0000000104b3e3fc ShuksanInit(IStartupScreen* (*)(), IPlugIn*) + 7676
21 com.adobe.InDesign 0x0000000100001c7e main + 94
22 com.adobe.InDesign 0x0000000100001bb4 start + 52
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x00007fff8af45662 kevent64 + 10
1 libdispatch.dylib 0x00007fff9067043d _dispatch_mgr_invoke + 239
2 libdispatch.dylib 0x00007fff90670152 _dispatch_mgr_thread + 52
Thread 2:
0 libsystem_kernel.dylib 0x00007fff8af44716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff97874c77 _pthread_cond_wait + 787
2 com.apple.CoreServices.CarbonCore 0x00007fff92a51c37 TSWaitOnConditionTimedRelative + 148
3 com.apple.CoreServices.CarbonCore 0x00007fff92a2238d MPWaitOnQueue + 192
4 PMRuntime.dylib 0x0000000101682be1 0x101681000 + 7137
5 com.apple.CoreServices.CarbonCore 0x00007fff92a2290b PrivateMPEntryPoint + 58
6 libsystem_pthread.dylib 0x00007fff97872899 _pthread_body + 138
7 libsystem_pthread.dylib 0x00007fff9787272a _pthread_start + 137
8 libsystem_pthread.dylib 0x00007fff97876fc9 thread_start + 13
Thread 3:
0 libsystem_kernel.dylib 0x00007fff8af44e6a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x00007fff97873f08 _pthread_wqthread + 330
2 libsystem_pthread.dylib 0x00007fff97876fb9 start_wqthread + 13
Thread 4:
0 libsystem_kernel.dylib 0x00007fff8af4534a fstat$INODE64 + 10
1 IMSLib.dylib 0x0000000119a3d2dd 0x1199c0000 + 512733
2 IMSLib.dylib 0x00000001199f3616 0x1199c0000 + 210454
3 IMSLib.dylib 0x00000001199f39ef 0x1199c0000 + 211439
4 IMSLib.dylib 0x0000000119a1f3c8 0x1199c0000 + 390088
5 IMSLib.dylib 0x00000001199f328d 0x1199c0000 + 209549
6 IMSLib.dylib 0x0000000119a2ebdf 0x1199c0000 + 453599
7 IMSLib.dylib 0x00000001199f64f0 0x1199c0000 + 222448
8 IMSLib.dylib 0x00000001199f894b 0x1199c0000 + 231755
9 IMSLib.dylib 0x0000000119a3fc0e 0x1199c0000 + 523278
10 IMSLib.dylib 0x0000000119a40a0b 0x1199c0000 + 526859
11 IMSLib.dylib 0x00000001199ea34e 0x1199c0000 + 172878
12 IMSLib.dylib 0x00000001199ded11 0x1199c0000 + 126225
13 IMSLib.dylib 0x00000001199d37ef 0x1199c0000 + 79855
14 IMSLib.dylib 0x00000001199e3851 0x1199c0000 + 145489
15 IMSLib.dylib 0x00000001199da4f1 0x1199c0000 + 107761
16 IMSLib.dylib 0x00000001199cce14 0x1199c0000 + 52756
17 libsystem_pthread.dylib 0x00007fff97872899 _pthread_body + 138
18 libsystem_pthread.dylib 0x00007fff9787272a _pthread_start + 137
19 libsystem_pthread.dylib 0x00007fff97876fc9 thread_start + 13
Thread 5:
0 libsystem_kernel.dylib 0x00007fff8af44e6a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x00007fff97873f08 _pthread_wqthread + 330
2 libsystem_pthread.dylib 0x00007fff97876fb9 start_wqthread + 13
Thread 6:: com.apple.NSURLConnectionLoader
0 libsystem_kernel.dylib 0x00007fff8af40a1a mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff8af3fd18 mach_msg + 64
2 com.apple.CoreFoundation 0x00007fff8d1b0315 __CFRunLoopServiceMachPort + 181
3 com.apple.CoreFoundation 0x00007fff8d1af939 __CFRunLoopRun + 1161
4 com.apple.CoreFoundation 0x00007fff8d1af275 CFRunLoopRunSpecific + 309
5 com.apple.Foundation 0x00007fff975a1907 +[NSURLConnection(Loader) _resourceLoadLoop:] + 348
6 com.apple.Foundation 0x00007fff975a170b __NSThread__main__ + 1318
7 libsystem_pthread.dylib 0x00007fff97872899 _pthread_body + 138
8 libsystem_pthread.dylib 0x00007fff9787272a _pthread_start + 137
9 libsystem_pthread.dylib 0x00007fff97876fc9 thread_start + 13
Thread 7:
0 libsystem_kernel.dylib 0x00007fff8af44e6a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x00007fff97873f08 _pthread_wqthread + 330
2 libsystem_pthread.dylib 0x00007fff97876fb9 start_wqthread + 13
Thread 8 Crashed:
0 libsystem_kernel.dylib 0x00007fff8af44866 __pthread_kill + 10
1 libsystem_pthread.dylib 0x00007fff9787335c pthread_kill + 92
2 libsystem_c.dylib 0x00007fff8fa39bba abort + 125
3 libsystem_malloc.dylib 0x00007fff919a5bf9 nanozone_error + 486
4 libsystem_malloc.dylib 0x00007fff919a5dbb _nano_malloc_check_clear + 445
5 libsystem_malloc.dylib 0x00007fff919a46c4 nano_malloc + 35
6 libsystem_malloc.dylib 0x00007fff919a287c malloc_zone_malloc + 71
7 libsystem_malloc.dylib 0x00007fff919a3290 malloc + 42
8 libc++abi.dylib 0x00007fff90c5853e operator new(unsigned long) + 30
9 libstdc++.6.dylib 0x00007fff8f47d0be std::string::_Rep::_S_create(unsigned long, unsigned long, std::allocator<char> const&) + 102
10 libstdc++.6.dylib 0x00007fff8f47d00d std::string::_Rep::_M_clone(std::allocator<char> const&, unsigned long) + 35
11 libstdc++.6.dylib 0x00007fff8f47dae6 std::string::reserve(unsigned long) + 62
12 libstdc++.6.dylib 0x00007fff8f47de3b std::string::append(char const*, unsigned long) + 101
13 IMSLib.dylib 0x0000000119a414fb 0x1199c0000 + 529659
14 IMSLib.dylib 0x0000000119a416a2 0x1199c0000 + 530082
15 IMSLib.dylib 0x00000001199ea192 0x1199c0000 + 172434
16 IMSLib.dylib 0x00000001199ded11 0x1199c0000 + 126225
17 IMSLib.dylib 0x00000001199d37ef 0x1199c0000 + 79855
18 IMSLib.dylib 0x00000001199e3851 0x1199c0000 + 145489
19 IMSLib.dylib 0x00000001199da4f1 0x1199c0000 + 107761
20 IMSLib.dylib 0x00000001199cce14 0x1199c0000 + 52756
21 libsystem_pthread.dylib 0x00007fff97872899 _pthread_body + 138
22 libsystem_pthread.dylib 0x00007fff9787272a _pthread_start + 137
23 libsystem_pthread.dylib 0x00007fff97876fc9 thread_start + 13
Thread 9:: com.apple.CFSocket.private
0 libsystem_kernel.dylib 0x00007fff8af449aa __select + 10
1 com.apple.CoreFoundation 0x00007fff8d1fbd43 __CFSocketManager + 867
2 libsystem_pthread.dylib 0x00007fff97872899 _pthread_body + 138
3 libsystem_pthread.dylib 0x00007fff9787272a _pthread_start + 137
4 libsystem_pthread.dylib 0x00007fff97876fc9 thread_start + 13
Thread 10:
0 libsystem_kernel.dylib 0x00007fff8af44e6a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x00007fff97873f08 _pthread_wqthread + 330
2 libsystem_pthread.dylib 0x00007fff97876fb9 start_wqthread + 13
Thread 8 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000000 rbx: 0x0000000119dfa000 rcx: 0x0000000119df8958 rdx: 0x0000000000000000
rdi: 0x0000000000007c13 rsi: 0x0000000000000006 rbp: 0x0000000119df8980 rsp: 0x0000000119df8958
r8: 0x0000000000000000 r9: 0x0000000000000000 r10: 0x0000000008000000 r11: 0x0000000000000206
r12: 0x0000000104bf7000 r13: 0x00006180002737c0 r14: 0x0000000000000006 r15: 0x0000000000000000
rip: 0x00007fff8af44866 rfl: 0x0000000000000206 cr2: 0x00000001083c9000
Logical CPU: 0
Error Code: 0x02000148
Trap Number: 133
Binary Images:
0x100000000 - 0x100005fff +com.adobe.InDesign (9.2.0.69 - 9200) <B7C09BD6-74AF-323E-8D22-D5E1F7965643> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Adobe InDesign CC
0x10000c000 - 0x10000eff7 +com.adobe.InDesign.InDesignModelAndUI (9.0 - 0) <612870BE-869E-3165-9714-55F900A66BCC> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/InDesignModelAndUI.framework/Versions/A/InDesignModelAndUI
0x100014000 - 0x10001cfff +com.adobe.coretech.adobesplashkit (AdobeSplashKit Version 1.0 - 1.0) <65BFDA83-4121-3D12-9BBE-9F4FF1DB3D6A> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeSplashKit.framework/Versions/A/AdobeSplashKit
0x100025000 - 0x10002ffff +ASLSupportLib.dylib (1) <1039F962-C495-36E4-B868-3DA5C43E3EBF> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/ASLSupportLib.dylib
0x100037000 - 0x10013aff7 +DV_WidgetBinLib.dylib (1) <57491245-3B90-3D4B-B4B6-4441EE325E3C> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/DV_WidgetBinLib.dylib
0x1001d5000 - 0x10021aff7 +TextPanelLib.dylib (1) <4B30610F-C637-3910-A413-C40325795CAD> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/TextPanelLib.dylib
0x100237000 - 0x100398fff +WidgetBinLib.dylib (1) <50EE77D3-591B-306F-9D62-2026938837EE> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/WidgetBinLib.dylib
0x10044a000 - 0x100616fff +com.adobe.owl (AdobeOwl version 5.0.24 - 5.0.24) <1C99AA07-E73F-370B-82FA-01C1C4AAF97D> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeOwl.framework/Versions/A/AdobeOwl
0x100659000 - 0x10089dfff +com.adobe.dvacore.framework (7.0.849324 - 7.0.849324.0) <08EB97C1-03E5-3C1B-B154-C886807BC6F1> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/dvacore.framework/Versions/A/dvacore
0x100964000 - 0x100df1ff7 +com.adobe.dvaui.framework (7.0.849324 - 7.0.849324.0) <25942AAC-0437-303F-9663-B17113468EBB> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/dvaui.framework/Versions/A/dvaui
0x101089000 - 0x101089fff +com.adobe.InDesign.InDesignModel (9.0 - 0) <7DCCCD9E-8ECB-330B-84AF-4F090F82BBBA> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/InDesignModel.framework/Versions/A/InDesignModel
0x10108e000 - 0x10109cfff +com.adobe.boost_threads.framework (7.0.847203 - 7.0.847203.0) <A0AE19A9-2B8E-310A-8AC1-0E2E026E7A40> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/boost_threads.framework/Versions/A/boost_threads
0x1010b2000 - 0x1010b8ff7 +com.adobe.boost_date_time.framework (7.0.847203 - 7.0.847203.0) <F30F59C3-41C0-3DB1-899A-E2491EA25263> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/boost_date_time.framework/Versions/A/boost_date_time
0x1010c7000 - 0x101536ff7 +PublicLib.dylib (1) <1B305F6E-A0D3-39A3-91FE-B878D638B7A7> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/PublicLib.dylib
0x101681000 - 0x10168bfff +PMRuntime.dylib (1) <0164EA5E-E56E-332F-901A-5E514833C38F> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/PMRuntime.dylib
0x101694000 - 0x1016abff7 +com.adobe.AFL (AdobeAFL 1.5.0 - 1.5) <1C46F2BE-2E4D-3E25-ACDF-85E2962B92DF> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeAFL.framework/Versions/A/AdobeAFL
0x1016ba000 - 0x1019cbff7 +com.adobe.CoolType (AdobeCoolType 5.15.00.31977 - 5.15.00.31977) <42323DBD-3A6D-3C41-A2C1-2B944789D8A9> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeCoolType.framework/Versions/A/AdobeCoolType
0x101a13000 - 0x101a30fff +com.adobe.BIB (AdobeBIB 1.2.03.31977 - 1.2.03.31977) <A69D3AA0-9248-3B77-991B-89B2B7FE46BB> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeBIB.framework/Versions/A/AdobeBIB
0x101a38000 - 0x101b7efff +com.adobe.ACE (AdobeACE 2.20.02.31977 - 2.20.02.31977) <3A212837-B075-34C0-96E9-5A4019C9DFEE> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeACE.framework/Versions/A/AdobeACE
0x101b92000 - 0x102163fff +com.adobe.AGM (AdobeAGM 4.30.29.31977 - 4.30.29.31977) <BFFDBF0E-28EF-3720-93BE-293618541D26> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeAGM.framework/Versions/A/AdobeAGM
0x102200000 - 0x10223dfff +com.adobe.ARE (AdobeARE 1.5.02.31977 - 1.5.02.31977) <73174C59-1DDC-3416-A0AD-4D70930ABA60> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeARE.framework/Versions/A/AdobeARE
0x102245000 - 0x10226bfff +com.adobe.BIBUtils (AdobeBIBUtils 1.1.01 - 1.1.01) <FA20BCA0-05BF-35ED-95B7-5775B8310D12> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeBIBUtils.framework/Versions/A/AdobeBIBUtils
0x102273000 - 0x10280cfff +com.adobe.MPS (AdobeMPS 5.8.1.31977 - 5.8.1.31977) <96C4D283-326B-3E50-B555-534492C6AA95> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeMPS.framework/Versions/A/AdobeMPS
0x102889000 - 0x1028a7fff +com.adobe.dvaflashview.framework (7.0.849324 - 7.0.849324.0) <46FFD5B4-2182-3CC3-A258-486E585A5B2D> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/dvaflashview.framework/Versions/A/dvaflashview
0x1028bf000 - 0x1028c3ff7 +com.adobe.ape.shim (3.4.0.29366 - 3.4.0.29366) <B9447EE8-6F91-9E85-C163-96600BF70764> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/adbeape.framework/Versions/A/adbeape
0x1028ca000 - 0x10298cfff +com.adobe.exo.framework (7.0.849324 - 7.0.849324.0) <AF41BB10-6BB7-3645-9F60-AE77E54F04F1> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/exo.framework/Versions/A/exo
0x102a2a000 - 0x102ad8fff +com.adobe.dvaworkspace.framework (7.0.849324 - 7.0.849324.0) <97F274A8-A56B-3F3A-AAA7-66B9FBEFEBF1> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/dvaworkspace.framework/Versions/A/dvaworkspace
0x102b5b000 - 0x1031fafff +com.adobe.PlugPlugOwl (4.2.0.36 - 4.2.0.36) <D6EC53B4-E257-3698-8EA8-24D4E3D98EBD> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/PlugPlugOwl.framework/Versions/A/PlugPlugOwl
0x1034ef000 - 0x10351bff7 +libtbb.dylib (0) <64B7013E-D548-3F7B-A2FB-28B7B932275C> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/libtbb.dylib
0x103536000 - 0x103555fe7 +libtbbmalloc.dylib (0) <6887ED68-67ED-3748-82DA-B39A3EB210BB> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/libtbbmalloc.dylib
0x10357a000 - 0x1042bffff +com.adobe.ICUData (4.0 - 3.61) <01D90725-4B10-312C-9546-9C0CCCA1B7BB> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/ICUData.framework/Versions/4.0/libicudata.40.0.dylib
0x1042d3000 - 0x104404ff7 +com.adobe.ICUInternationalization (4.0 - 3.61) <CD4AD967-00CD-3979-8F82-1166E2058FA6> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/ICUInternationalization.framework/Versions/4.0/libicui18n.40.0 .dylib
0x104458000 - 0x10454eff7 +com.adobe.ICUUnicode (4.0 - 3.61) <2352E6C8-3431-3A99-92B9-382E85A018AC> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/ICUUnicode.framework/Versions/4.0/libicuuc.40.0.dylib
0x104586000 - 0x1046b4fff +com.winsoft.wrservices (WRServices 7.0.0 - 7.0.0) <0853A41B-A14A-37B7-B27F-457F87865EAD> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/WRServices.framework/Versions/A/WRServices
0x10470f000 - 0x1047fffff +com.adobe.amtlib (7.0.0.247 - 7.0.0.247) <48D8FFDB-DFEA-310D-BAE3-DFD8D05B0160> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/amtlib.framework/Versions/A/amtlib
0x104812000 - 0x104814fff +com.adobe.AdobeCrashReporter (7.0 - 7.1) <B68D0D42-8DEB-3F22-BD17-981AC060E9D7> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeCrashReporter.framework/Versions/A/AdobeCrashReporter
0x10481a000 - 0x1048d1ff7 +com.adobe.boost_regex.framework (7.0.847203 - 7.0.847203.0) <F1C659D9-D3E8-3ACE-8368-9161529A6A66> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/boost_regex.framework/Versions/A/boost_regex
0x10493b000 - 0x1049aaff7 +com.adobe.adobe_caps (adobe_caps 7.0.0.21 - 7.0.0.21) <CE3C6356-9EE2-3B88-8261-8612A0743F56> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/adobe_caps.framework/Versions/A/adobe_caps
0x1049b5000 - 0x1049c0fff +com.adobe.boost_signals.framework (7.0.847203 - 7.0.847203.0) <E0B3BB47-4294-3D65-8979-29B2D6C5DD2E> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/boost_signals.framework/Versions/A/boost_signals
0x1049cf000 - 0x1049d3fff +com.adobe.boost_system.framework (7.0.847203 - 7.0.847203.0) <70F73B9F-8416-37BF-9294-086AE475B743> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/boost_system.framework/Versions/A/boost_system
0x1049d9000 - 0x104a7afff +com.adobe.ICUConverter (4.0 - 3.61) <46764474-111C-3B13-AF62-002B71877405> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/ICUConverter.framework/Versions/4.0/libicucnv.40.0.dylib
0x104a9a000 - 0x104afcfff +DataBaseLib.dylib (1) <670C9B64-DD9A-3B32-BDA9-22D6EA26A5EF> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/DataBaseLib.dylib
0x104b10000 - 0x104b7dfff +ObjectModelLib.dylib (1) <38EFA738-542E-32EB-A5AA-45380C5CCAAF> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/ObjectModelLib.dylib
0x104b9a000 - 0x104bbefff +com.adobe.AXE8SharedExpat (AdobeAXE8SharedExpat 3.8.0.30807 - 3.8.0.30807) <16FF5E16-19E0-3CE1-A68E-27567234429F> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeAXE8SharedExpat.framework/Versions/A/AdobeAXE8SharedExpat
0x108348000 - 0x108386fff +com.adobe.InDesign.Dictionary Editor Dialog (9.2.0.69 - 0) <EC06E951-7EDF-306A-85E2-B52805F8110C> /Applications/Adobe InDesign CC/*/Dictionary Editor Dialog
0x1083a7000 - 0x1083b6ff7 +com.adobe.InDesign.DTTransform (9.2.0.69 - 0) <417A914C-BEA9-3AF6-94BC-158C93DCDC56> /Applications/Adobe InDesign CC/*/DTTransform
0x10846c000 - 0x108479ff7 +com.adobe.InDesign.Text Color Panel (9.2.0.69 - 0) <B9722BDD-B3B2-3B6B-90EC-D7B52D54C678> /Applications/Adobe InDesign CC/*/Text Color Panel
0x108482000 - 0x108496ff7 +com.adobe.InDesign.Story Panel (9.2.0.69 - 0) <989D8312-C513-36B9-9A2A-A161EC806905> /Applications/Adobe InDesign CC/*/Story Panel
0x1084a5000 - 0x1084afff7 +com.adobe.InDesign.Span Columns Panel (9.2.0.69 - 0) <15F063E0-7874-30AE-841C-C10A12CF8B5E> /Applications/Adobe InDesign CC/*/Span Columns Panel
0x1084b8000 - 0x1084c9ff7 +com.adobe.InDesign.SING (9.2.0.69 - 0) <3CC6846B-D663-31F2-BAB9-03BCAD89606E> /Applications/Adobe InDesign CC/*/SING
0x1084d3000 - 0x1084ddfff +com.adobe.InDesign.Justification Panel (9.2.0.69 - 0) <4F940073-AAF8-3FDF-87FA-04A8DC87679D> /Applications/Adobe InDesign CC/*/Justification Panel
0x109caa000 - 0x109cabff7 +com.adobe.InDesign.Metadata Database Filter (9.2.0.69 - 0) <3BE1DF86-81E8-359D-A40E-84EC7A016E16> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Metadata Database Filter.InDesignPlugin/Metadata Database Filter
0x109cb0000 - 0x109ccaff7 +com.adobe.InDesign.IME (9.2.0.69 - 0) <905334C5-8BF8-3958-8216-720BDB4D3A1F> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/IME.InDesignPlugin/IME
0x109cda000 - 0x109cddfff +com.adobe.InDesign.Global Preferences Panel (9.2.0.69 - 0) <3B261D67-E6B5-32E3-AC7E-AFCCDC9B75CB> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Global Preferences Panel.InDesignPlugin/Global Preferences Panel
0x109ce3000 - 0x109cedfff +com.adobe.InDesign.Workgroup Client UI (9.2.0.69 - 0) <5025F9EC-7C4C-377B-92F0-EC208F75B671> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Workgroup Client UI.InDesignPlugin/Workgroup Client UI
0x10aa1f000 - 0x10aa23fff com.apple.agl (3.2.3 - AGL-3.2.3) <1B85306F-D2BF-3FE3-9915-165237B491EB> /System/Library/Frameworks/AGL.framework/Versions/A/AGL
0x10af61000 - 0x10af9ffff +com.adobe.AAM.AdobeUpdaterNotificationFramework (UpdaterNotifications 7.0.1.102 - 7.0.1.102) <75ADE364-1107-3DA7-84A2-26C6874EB881> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/UpdaterNotifications.framework/Versions/A/UpdaterNotifications
0x10afdc000 - 0x10afeefff +com.adobe.boost_filesystem.framework (7.0.847203 - 7.0.847203.0) <B0F56E9F-BAAB-34C5-93C4-C713203AB0DF> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/boost_filesystem.framework/Versions/A/boost_filesystem
0x10c6ee000 - 0x10c6f0ff7 com.apple.textencoding.unicode (2.6 - 2.6) <0EEF0283-1ACA-3147-89B4-B4E014BFEC52> /System/Library/TextEncodings/Unicode Encodings.bundle/Contents/MacOS/Unicode Encodings
0x10c6f5000 - 0x10c6f9fff +com.adobe.InDesign.Help (9.2.0.69 - 0) <09CFAB79-828F-39A9-8E6C-634999CF4EC8> /Applications/Adobe InDesign CC/*/Help
0x10d632000 - 0x10d7f8ff7 +com.adobe.InDesign.AppFramework (9.2.0.69 - 0) <D84FAD4D-B653-3EB4-8FDA-7264A51F7359> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/AppFramework.InDesignPlugin/AppFramework
0x10e0cf000 - 0x10e255ff7 +com.adobe.InDesign.SettingsInCloud (9.2.0.69 - 0) <EC5B37FA-9195-3243-9D62-C6A5FB8E394A> /Applications/Adobe InDesign CC/*/SettingsInCloud
0x10e640000 - 0x10e7feff7 +com.adobe.InDesign.Text Walker (9.2.0.69 - 0) <BA84432B-6B10-3684-982F-856AB2248204> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Text Walker.InDesignPlugin/Text Walker
0x10e856000 - 0x10e8a7fff +com.adobe.InDesign.Linguistics (9.2.0.69 - 0) <13A4BC6D-4C68-3884-9059-5837B952EC17> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Linguistics.InDesignPlugin/Linguistics
0x10e8c1000 - 0x10e927fff +com.adobe.InDesign.Text Panel (9.2.0.69 - 0) <70BA1FF5-A8FD-3D59-976A-5AE782CB79ED> /Applications/Adobe InDesign CC/*/Text Panel
0x10e94a000 - 0x10e996ff7 +com.adobe.InDesign.Spelling Panel (9.2.0.69 - 0) <B208BBCC-1AAB-354C-9CA6-44C6B5D35946> /Applications/Adobe InDesign CC/*/Spelling Panel
0x10e9b0000 - 0x10ec14fff +com.adobe.InDesign.Package and Preflight (9.2.0.69 - 0) <6590908A-0A78-32F4-A455-ABBEC9D97B5E> /Applications/Adobe InDesign CC/*/Package and Preflight
0x10ec5a000 - 0x10ecc7ff7 +com.adobe.AdobeXMPCore (Adobe XMP Core 5.5 -c 21 - 79.154911) <E8E31BC1-F7BC-3018-8CF8-AC3C7B2DCEA2> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeXMP.framework/Versions/A/AdobeXMP
0x10ecd3000 - 0x10eda5fff +com.adobe.InDesign.Text Editor (9.2.0.69 - 0) <C8F82611-461D-3339-A65E-51190B515F9F> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Text Editor.InDesignPlugin/Text Editor
0x10edd5000 - 0x10efe3fff +com.adobe.InDesign.Layout UI (9.2.0.69 - 0) <5BC0A7D6-7A69-346C-B5A1-4F4AF2AC5F01> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Layout UI.InDesignPlugin/Layout UI
0x10f043000 - 0x10f0b3fff +com.adobe.InDesign.Import Export UI (9.2.0.69 - 0) <FFA896AE-BAF9-30EC-A788-25AD02061296> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Import Export UI.InDesignPlugin/Import Export UI
0x10f0da000 - 0x10f1e8fff +com.adobe.InDesign.Hyperlinks (9.2.0.69 - 0) <BF029BB8-6578-303F-A983-9ADEE43AB7A4> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Hyperlinks.InDesignPlugin/Hyperlinks
0x10f213000 - 0x10f2b7fff +com.adobe.InDesign.Master Page (9.2.0.69 - 0) <557BD678-3F9D-3A4F-ABDA-8A1DD7D41AF6> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Master Page.InDesignPlugin/Master Page
0x10f2d1000 - 0x10f2fffff +com.adobe.InDesign.Utilities (9.2.0.69 - 0) <9F7A613A-54DB-3604-B811-FCE0BC56F416> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Utilities.InDesignPlugin/Utilities
0x10f31a000 - 0x10f417fff +com.adobe.InDesign.Color Management (9.2.0.69 - 0) <33023C59-D4C5-3BF2-8C42-54BD6E50E651> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Color Management.InDesignPlugin/Color Management
0x10f444000 - 0x10f659ff7 +com.adobe.InDesign.Application UI (9.2.0.69 - 0) <2235307F-D211-397C-BAA7-34028F1C4F56> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Application UI.InDesignPlugin/Application UI
0x10f6f0000 - 0x10fa0eff7 +com.adobe.dvaadameve.framework (7.0.849324 - 7.0.849324.0) <FF303DE3-2F53-3AA7-94E7-93B46DB28918> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/dvaadameve.framework/Versions/A/dvaadameve
0x10fce4000 - 0x10fd33fff +com.adobe.headlights.LogSessionFramework (2.1.2.1785) <160BF2F9-B418-31C5-866F-6FADA1B720ED> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/LogSession.framework/Versions/A/LogSession
0x10fd59000 - 0x10fe17fff +com.adobe.AdobeExtendScript (ExtendScript 4.5.5 - 4.5.5.31983) <7764EE73-651A-3D8A-9B0F-A25DF57D79E1> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeExtendScript.framework/Versions/A/AdobeExtendScript
0x10fe3f000 - 0x10feeaff7 +com.adobe.AdobeScCore (ScCore 4.5.5 - 4.5.5.31983) <0E9111E5-ECBF-3C1C-82DB-9A945F1A573C> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeScCore.framework/Versions/A/AdobeScCore
0x10ff14000 - 0x110064fff +com.adobe.dvascriptui.framework (7.0.849324 - 7.0.849324.0) <EC31CE70-34C1-31E0-A68D-F49D99ADA604> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/dvascriptui.framework/Versions/A/dvascriptui
0x110186000 - 0x110366fff +com.adobe.InDesign.Document Framework (9.2.0.69 - 0) <ABC1E3A8-3AC3-3199-B572-B734998B696E> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Document Framework.InDesignPlugin/Document Framework
0x1106d2000 - 0x110813fff +com.adobe.InDesign.SangamServicer-Mapper (9.2.0.69 - 0) <F2E5BD34-3091-317F-88A8-0B6090F262E0> /Applications/Adobe InDesign CC/*/SangamServicer-Mapper
0x110837000 - 0x1108a0fff +com.adobe.AdobeSangam (AdobeSangam 5.65.0.31977 - 5.65.0.31977) <81A4C7F3-E791-3AD1-A44B-CF5BB5B6A545> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeSangam.framework/Versions/A/AdobeSangam
0x1108ee000 - 0x11091aff7 +com.adobe.Reader for DOCX (Reader for DOCX 5.65.0.31977 - 5.65.0.31977) <C21B199B-542B-34CD-8F0E-F38D970D88BD> /Applications/Adobe InDesign CC/*/Reader for DOCX
0x110925000 - 0x110a23ff7 +com.adobe.AXEDOMCore (AdobeAXEDOMCore 3.8.0.30807 - 3.8.0.30807) <DF0EC9F6-D499-39B8-B2F4-CAF4F742D702> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeAXEDOMCore.framework/Versions/A/AdobeAXEDOMCore
0x110a39000 - 0x110b16fff +com.adobe.AXEXSLT (AdobeAXSLE 3.8.0.30807 - 3.8.0.30807) <6299FB87-471B-3EA2-9E02-6DEA293FA533> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeAXSLE.framework/Versions/A/AdobeAXSLE
0x110b2b000 - 0x110b96ff7 +com.adobe.AdobeSangamML (AdobeSangamML 5.65.0.31977 - 5.65.0.31977) <BF6D92E9-AF42-3B9F-BBDD-FBCDE605C4BE> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeSangamML.framework/Versions/A/AdobeSangamML
0x110bba000 - 0x110c18ff7 +com.adobe.Reader for Excel (Reader for Excel 5.65.0.31977 - 5.65.0.31977) <628DA00F-210B-3856-89F3-66393386E801> /Applications/Adobe InDesign CC/*/Reader for Excel
0x110c2b000 - 0x110c3ffff +com.adobe.AdobeSFL (AdobeSFL 1.1.0.31977 - 1.1.0.31977) <A1874DA3-6F12-333D-8941-ED3A08A1E265> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeSFL.framework/Versions/A/AdobeSFL
0x110c47000 - 0x110d3cfff +com.adobe.Reader for Quark (Reader for Quark 5.65.0.31977 - 5.65.0.31977) <7877BBF5-B31A-3CA9-9E8E-3FDFB174F261> /Applications/Adobe InDesign CC/*/Reader for Quark
0x110d56000 - 0x110db1ff7 +com.adobe.Reader for RTF (Reader for RTF 5.65.0.31977 - 5.65.0.31977) <3ACB0F8E-0B51-3E5C-B924-A31D1D6606F6> /Applications/Adobe InDesign CC/*/Reader for RTF
0x110dca000 - 0x110e38ff7 +com.adobe.Reader for Word (Reader for Word 5.65.0.31977 - 5.65.0.31977) <27531852-B602-3785-94C0-3B316DBEC69C> /Applications/Adobe InDesign CC/*/Reader for Word
0x110e4d000 - 0x110eb3fff +com.adobe.Reader for XLSX (Reader for XLSX 5.65.0.31977 - 5.65.0.31977) <D896568B-FB6A-3036-91FC-A1DF0FA820DF> /Applications/Adobe InDesign CC/*/Reader for XLSX
0x110ecd000 - 0x110ed5ff7 +com.adobe.ZTextReader (ZTextReader 5.65.0.31977 - 5.65.0.31977) <28B268EF-A3AD-3933-B4DC-247428D3A88D> /Applications/Adobe InDesign CC/*/ZTextReader
0x110f5c000 - 0x110fcbfff +com.adobe.InDesign.XMLParser (9.2.0.69 - 0) <745F02C0-071B-3979-B284-391BA59D9CF5> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/XMLParser.InDesignPlugin/XMLParser
0x110fe1000 - 0x111204fff +com.adobe.InDesign.XML (9.2.0.69 - 0) <97314A64-BB21-3965-B9D3-F4C219C3DCDF> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/XML.InDesignPlugin/XML
0x11124e000 - 0x11127bfff +com.adobe.InDesign.WorldReady (9.2.0.69 - 0) <787871A9-77D2-3095-8930-4F140D091F0A> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/WorldReady.InDesignPlugin/WorldReady
0x11128b000 - 0x1112c8ff7 +com.adobe.InDesign.Workgroup (9.2.0.69 - 0) <FEA65E81-92F4-36EE-940C-3C7BD07DB7F4> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Workgroup.InDesignPlugin/Workgroup
0x1112d8000 - 0x1112fafff +com.adobe.InDesign.Workgroup Client (9.2.0.69 - 0) <2447A61F-74CA-38D1-9444-22A25D2DEE98> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Workgroup Client.InDesignPlugin/Workgroup Client
0x111308000 - 0x111416fff +com.adobe.InDesign.Widgets (9.2.0.69 - 0) <A9FB91A0-7CDB-3025-B6AC-D53BA8BBEB1E> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Widgets.InDesignPlugin/Widgets
0x11147c000 - 0x1115c0ff7 +com.adobe.InDesign.Transparency (9.2.0.69 - 0) <636FD3CD-06FE-3D25-A252-368317D80C66> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Transparency.InDesignPlugin/Transparency
0x1115eb000 - 0x11259ffef +com.adobe.psl (AdobePSL 14.0.0.31988 - 14.0.0.31988) <1EBD1547-F7B1-379D-8F50-FB49C7E01A58> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobePSL.framework/Versions/A/AdobePSL
0x112762000 - 0x11281bff7 +com.adobe.JP2K (1.2.2 - 1.2.2.31977) <8BD41D6E-B8A2-36FA-B855-7CF02E856A08> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeJP2K.framework/Versions/A/AdobeJP2K
0x112842000 - 0x1128a4fff +com.adobe.InDesign.TOC (9.2.0.69 - 0) <99A6C9FF-2F20-3475-A9CF-24C7B0F63CF3> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/TOC.InDesignPlugin/TOC
0x1128b8000 - 0x112ebbff7 +com.adobe.InDesign.Text (9.2.0.69 - 0) <4216A99F-7F58-3E9B-A37E-8178A6ED812A> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Text.InDesignPlugin/Text
0x112f59000 - 0x112fcfff7 +com.adobe.InDesign.Text Wrap (9.2.0.69 - 0) <8B65C672-BB4E-3F46-A7C5-6B2D0331C0F5> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Text Wrap.InDesignPlugin/Text Wrap
0x112fe8000 - 0x11300cfff +com.adobe.InDesign.Text Wrap Path (9.2.0.69 - 0) <D826BA05-20A8-367F-9414-573944D46303> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Text Wrap Path.InDesignPlugin/Text Wrap Path
0x113015000 - 0x11302bff7 +com.adobe.InDesign.Text Editor Model (9.2.0.69 - 0) <C997B3C0-98C6-34A5-89E0-DBD7FB071AD6> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Text Editor Model.InDesignPlugin/Text Editor Model
0x113036000 - 0x11308cff7 +com.adobe.InDesign.Text Attributes (9.2.0.69 - 0) <F90E2E25-38B2-3F12-8902-D5A56D6AD919> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Text Attributes.InDesignPlugin/Text Attributes
0x1130a7000 - 0x113104ff7 +com.adobe.InDesign.TableStyles (9.2.0.69 - 0) <4D83BFF9-CAF4-34EF-BEAE-86E2D8A1D14F> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/TableStyles.InDesignPlugin/TableStyles
0x113117000 - 0x113349fff +com.adobe.InDesign.Table Model (9.2.0.69 - 0) <829471A3-999A-3B01-BD5A-B2ADC2F2972A> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Table Model.InDesignPlugin/Table Model
0x113385000 - 0x1133d8ff7 +com.adobe.InDesign.Image Filters (9.2.0.69 - 0) <F3DF9DCA-6073-3DF8-89EB-18F8D1DB8902> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Image Filters.InDesignPlugin/Image Filters
0x1133e4000 - 0x11346ffff +com.adobe.InDesign.SVGExport (9.2.0.69 - 0) <E86D7C69-48CA-362B-B3A0-CC2C8F4B31B5> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/SVGExport.InDesignPlugin/SVGExport
0x113489000 - 0x113547fff +com.adobe.SVGExport (AdobeSVGExport 6.0 - 6.0) <2FAB4B9A-EDB9-0FF9-55B2-52DEC380D2BF> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeSVGExport.framework/Versions/A/AdobeSVGExport
0x11356a000 - 0x11360efff +com.adobe.InDesign.Support for JavaScript (9.2.0.69 - 0) <EC1C0215-E510-3D0F-B692-E2F8853811D9> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Support for JavaScript.InDesignPlugin/Support for JavaScript
0x113639000 - 0x113690ff7 +com.adobe.InDesign.Support for AppleScript (9.2.0.69 - 0) <7D7706C3-B3C9-3B96-8473-CAD03A053148> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Support for AppleScript.InDesignPlugin/Support for AppleScript
0x1136a6000 - 0x1137a8ff7 +com.adobe.InDesign.Graphics (9.2.0.69 - 0) <FCBDB8E7-46E8-3987-9BCB-0E3177F00F11> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Graphics.InDesignPlugin/Graphics
0x1137cc000 - 0x113827ff7 +com.adobe.InDesign.Stroke and Fill (9.2.0.69 - 0) <72D3DE23-CFCC-3821-80AE-0908DB5768F5> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Stroke and Fill.InDesignPlugin/Stroke and Fill
0x11383f000 - 0x113980ff7 +com.adobe.InDesign.Spread (9.2.0.69 - 0) <AF10A69E-0D98-3E25-ABE5-CC310529098A> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Spread.InDesignPlugin/Spread
0x1139b2000 - 0x113a14fff +com.adobe.InDesign.Spread UI (9.2.0.69 - 0) <B7A3AE3F-DC65-34F6-B601-1780AF9220D9> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Spread UI.InDesignPlugin/Spread UI
0x113a30000 - 0x113a7afff +com.adobe.InDesign.Spline (9.2.0.69 - 0) <53E6EF37-C070-39BE-BB18-2703B2041EC6> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Spline.InDesignPlugin/Spline
0x113a92000 - 0x113adaff7 +com.adobe.InDesign.Spline UI (9.2.0.69 - 0) <9FC93D14-6D7C-32EE-BF90-3756FEA25FEE> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Spline UI.InDesignPlugin/Spline UI
0x113af6000 - 0x113b09ff7 +com.adobe.InDesign.Spelling Service (9.2.0.69 - 0) <1E6AAFFE-ACCA-3E0B-AA63-37A767CC336E> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Spelling Service.InDesignPlugin/Spelling Service
0x113b18000 - 0x113b26fff +com.adobe.InDesign.Sound (9.2.0.69 - 0) <43D68A27-E17F-3E9D-A02D-EB3230178339> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Sound.InDesignPlugin/Sound
0x113b32000 - 0x113bbcfff +com.adobe.InDesign.SharedContent (9.2.0.69 - 0) <3863D336-3468-35E6-8298-3C1BFB37FBA5> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/SharedContent.InDesignPlugin/SharedContent
0x113bdd000 - 0x113c05fff +com.adobe.InDesign.Sections (9.2.0.69 - 0) <4DB2B4F0-124A-36F1-B1A3-9BFA36BB2FCF> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Sections.InDesignPlugin/Sections
0x113c16000 - 0x113cc4fff +com.adobe.InDesign.Scripting (9.2.0.69 - 0) <01395410-7F18-323A-BF92-4FAC6F3ECCD5> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Scripting.InDesignPlugin/Scripting
0x113ce3000 - 0x113d0dff7 +com.adobe.InDesign.Rulers (9.2.0.69 - 0) <C21FAD98-14EA-3E6F-9D58-7DED5B0EFB76> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Rulers.InDesignPlugin/Rulers
0x113d20000 - 0x113eb5fff +com.adobe.InDesign.Print (9.2.0.69 - 0) <4E53767E-8497-32D1-B922-735E610640E2> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Print.InDesignPlugin/Print
0x113ee2000 - 0x113f21ff7 +com.adobe.InDesign.PNG Import Filter (9.2.0.69 - 0) <3EA87A99-3FBF-38E5-BE00-896001E5AD91> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/PNG Import Filter.InDesignPlugin/PNG Import Filter
0x113f31000 - 0x113f6afff +com.adobe.InDesign.Photoshop Import Filter (9.2.0.69 - 0) <B62B89C7-29F4-3058-BBD9-62BAB193B133> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Photoshop Import Filter.InDesignPlugin/Photoshop Import Filter
0x113f7a000 - 0x113fe0fff +com.adobe.InDesign.Book (9.2.0.69 - 0) <A57C7841-5282-3A46-8202-CAB3C70DFBD0> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Book.InDesignPlugin/Book
0x113ff7000 - 0x11410dff7 +com.adobe.InDesign.Image (9.2.0.69 - 0) <E026A24C-EF82-33E8-95FD-463A23618CB2> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Image.InDesignPlugin/Image
0x114139000 - 0x114145ff7 +com.adobe.InDesign.Group (9.2.0.69 - 0) <8DF66586-0FC5-3EA5-8F0D-6083387F0697> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Group.InDesignPlugin/Group
0x114152000 - 0x114294fe7 +com.adobe.InDesign.EPS Page Item (9.2.0.69 - 0) <CFD4D636-06B2-3969-91FA-ED68F0873111> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/EPS Page Item.InDesignPlugin/EPS Page Item
0x1142d3000 - 0x11451ffff +com.adobe.InDesign.PDF (9.2.0.69 - 0) <36EED87F-F233-3B82-83C4-57584FEBE296> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/PDF.InDesignPlugin/PDF
0x114561000 - 0x114665fff +com.adobe.PDFPort (AdobePDFPort 2.1.0.31977 - 2.1.0.31977) <83787D51-C878-3CFF-A3A2-F2107F7BB920> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobePDFPort.framework/Versions/A/AdobePDFPort
0x114678000 - 0x1146a1ff7 +com.adobe.PDFSettings (AdobePDFSettings 1.04.0 - 1.4) <E07D101E-E47A-392A-8A44-005B49393DEC> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobePDFSettings.framework/Versions/A/AdobePDFSettings
0x1146ab000 - 0x114917ff7 +com.adobe.InDesign.Generic Page Item (9.2.0.69 - 0) <F0DECCE6-EAF5-30C0-8FB0-48FA56CB3503> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Generic Page Item.InDesignPlugin/Generic Page Item
0x114963000 - 0x1149a7fff +com.adobe.InDesign.Path Type (9.2.0.69 - 0) <32D8F2D5-AF06-375A-85ED-C4E42D3B790B> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Path Type.InDesignPlugin/Path Type
0x1149c0000 - 0x1149caff7 +PathTypeLib.dylib (1) <A6E44FB4-61D6-3729-B3DD-A4D22EEC73B3> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/PathTypeLib.dylib
0x1149d3000 - 0x114a88fff +com.adobe.InDesign.Paragraph Composer (9.2.0.69 - 0) <EEE3D51D-AF42-30AF-A8BA-DE663DC95888> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Paragraph Composer.InDesignPlugin/Paragraph Composer
0x114a99000 - 0x114adafff +com.adobe.InDesign.Open Place (9.2.0.69 - 0) <6CBC4B8F-3B3D-3B14-9512-6808497AC68A> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Open Place.InDesignPlugin/Open Place
0x114aee000 - 0x114b06ff7 +com.adobe.InDesign.Movie (9.2.0.69 - 0) <FD78448B-F572-32C2-9580-4A0681AC69EE> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Movie.InDesignPlugin/Movie
0x114b15000 - 0x114ba0fff +com.adobe.InDesign.Metadata (9.2.0.69 - 0) <361ED9DD-BAD7-35E5-AFE5-3176BAD1C0FC> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Metadata.InDesignPlugin/Metadata
0x114bbd000 - 0x114ccafff +com.adobe.AdobeXMPFiles (Adobe XMP Files 5.6 -f 81 - 79.154911) <38348CA8-7905-3AA4-AA00-95A6D912C491> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/Frameworks/AdobeXMPFiles.framework/Versions/A/AdobeXMPFiles
0x114d00000 - 0x114d5cff7 +com.adobe.InDesign.Media (9.2.0.69 - 0) <560CE1DB-99AF-389F-8BC2-37D5F83C110F> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Media.InDesignPlugin/Media
0x114d72000 - 0x114eacfff +com.adobe.InDesign.Links (9.2.0.69 - 0) <1BCD7856-3DD0-3C58-AF61-0E430CF5EFBC> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Links.InDesignPlugin/Links
0x114ee1000 - 0x114f0afff +com.adobe.InDesign.Layout (9.2.0.69 - 0) <98815961-6446-3917-B266-7E3DB625B782> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Layout.InDesignPlugin/Layout
0x114f19000 - 0x114f46fff +com.adobe.InDesign.Layer (9.2.0.69 - 0) <94604B73-0E52-30CB-9CC0-805F5B138FE4> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/Layer.InDesignPlugin/Layer
0x114f59000 - 0x115029fff +com.adobe.InDesign.INXCore (9.2.0.69 - 0) <FCF49243-A7FD-3993-A242-7ECAB3971857> /Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Required/INXCore.InDesignPlugin/INXCore
0x115051000 - 0x115157ff7 +com.adobe.InDesign.Indexing (9.2.0.69 - 0) <CD23A88C-DBB2-3F46-91CC -
Iphone 4 mic is not working properly
Hello,
Well my i droped my phone 4 and the back has been broken, well i replaced it with a new one, the result is that
My iphone camera was broken and i tried to replace it with a new one but the problem persist, and the mic is not working properly
That when i receive a phone call or when i call someone my iphone mic work sometimes and stop others and i discovered that by tapping on
The back of the iphone it work, and meanwhile i can use the mic for recording voice memos or for using viber or any software using the mic
And it works very good, only in phone calls it stop working and by tapping on the back it work again,
Anyone can help me???
Thanks guysThanks for the reply but yes it does record voice memo because there are 2 mics 1 on top and 1 on bottom.
the one that is using for making phone calls is the bottom one.Therefore top 1 is good but bottom is not. -
Flash player does not work properly on Windows 7 32 bits
Hello,
My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
In fact, it works correctly on some sites, like youtube, but not on some others like :
http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
http://www.myspace.com/ => no audio player, right click gives flash context menu
some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
No problem too with flash player on http://www.adobe.com/software/flash/about/
But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
I cannot check boxes,
My changes are not saved.
In most of flash animations, videos, ...,
when I click on parameters, I cannot do anything, even closing.
when I am in full screen mode, the message "press escape to exit...." does not disappear.
Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
Thank you for your helpHi eidnolb
Thanks for your answer.
This is what I have :
Verify user permissions
I have an administrator account.
I tried (uninstall, install and run) with super-administrator account for same results
Install the most current version.
I am running the latest version (10.0.45.2)
Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
I did not "clean" my computer.
Troubleshoot Pop-up blockers
I have no Pop-up or esle blocker software.
Ensure that Internet utilities do not block Flash Player
I tried (uninstall, install and run) without Avast.
I have windows 7 firewall. I do not know where I can allow ActiveX controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
Fix machine crashes when displaying Flash content
I have no freez or crash.
Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
Using FF, I have SWF vs 10.0.45.2 and it is Enabled
I really do not understand !!
Thanks,
Ju' -
Hi ALL i have a BDC code it is not working properly
this BDC code is not working properly , when ever the file is transfering BDC is aborting in the case of invalid material/batch comes into teh picture... so please could you ''Check for invalid material/batch combinations so they are not processed by the BDC in the program and correctly output in an exception report''
*****************************CODE HERE*****************************
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_file LIKE rlgrap-filename,
p_arch LIKE rlgrap-filename. "RM080107
SELECTION-SCREEN SKIP.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
I N C L U D E S
INCLUDE zwm_np_stock_recon_top.
INCLUDE zwm_np_stock_recon_f01.
I N I T I A L I Z A T I O N
INITIALIZATION.
PERFORM get_interface_filename USING c_interface_file p_file.
PERFORM get_interface_filename USING c_archive_file p_arch."RM080107
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
PERFORM read_file USING p_file.
PERFORM pre_processing.
E N D O F S E L E C T I O N
END-OF-SELECTION.
PERFORM process_checks.
IF w_no_change = 'X'.
WRITE: / text-b03.
WRITE: / sy-uline(34).
ELSE.
PERFORM bdc_mi09.
PERFORM file_check_report.
PERFORM bdc_report.
ENDIF.
PERFORM post_process_checks.
*-- Move the processed file to archive directory
PERFORM move_file.
...*************.........first include...................************
INCLUDE ZWM_NP_STOCK_RECON_TOP *
Data declaration ----------------------------------------------
TYPES: st_rawdata(2000) TYPE c.
TYPES: BEGIN OF st_stck_cnt,
werks TYPE iseg-werks, "plant
lgort TYPE iseg-lgort, "storage location
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
vfdat TYPE mch1-vfdat, "Sell by date
lwedt TYPE mch1-lwedt, "Manufacture date
quarn(8) TYPE n, "qaunrantine quantity
menge(8) TYPE n, "quantity on hand
message(1), "Message Type (E/W/I)
msg_txt TYPE t100-text, "Message Text
zerostck(1), "Zero stock identifier "RM220307
END OF st_stck_cnt.
TYPES: BEGIN OF st_batch_errors,
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
clabs TYPE mchb-clabs, "Stock Balance
END OF st_batch_errors.
DATA:
t_rawdata TYPE TABLE OF st_rawdata,
w_rawdata TYPE st_rawdata,
t_stck_cnt TYPE TABLE OF st_stck_cnt,
d_stck_cnt TYPE TABLE OF st_stck_cnt, "RM191006
w_stck_cnt TYPE st_stck_cnt,
t_batch_errors TYPE TABLE OF st_batch_errors,
w_batch_errors TYPE st_batch_errors,
t_messtab LIKE bdcmsgcoll OCCURS 0,
w_messtab LIKE LINE OF t_messtab,
w_no_change.
CONSTANTS: c_interface_file(26) TYPE c VALUE 'ZNP_STOCK_RECON',
c_archive_file(26) TYPE c
VALUE 'ZNP_STOCK_RECON_ARCHIVE'. "RM080107
.*************................second include..........************
***INCLUDE ZWM_NEXTPHARMA_STOKRECON_F01 .
*& Form read_file
reads NextPharma file sent through via webmethods
-->P_FILENAME
FORM read_file USING p_filename.
CLEAR: t_rawdata,
w_rawdata.
REFRESH: t_rawdata.
OPEN DATASET p_filename FOR INPUT IN TEXT MODE.
IF sy-subrc <> 0.
MESSAGE e720(01).
ENDIF.
DO.
READ DATASET p_filename INTO w_rawdata.
IF sy-subrc <> 0.
EXIT.
ELSE.
APPEND w_rawdata TO t_rawdata.
ENDIF.
ENDDO.
CLOSE DATASET p_filename.
ENDFORM. " read_file
*& Form pre_processing
Read file values into internal table
FORM pre_processing.
DATA: lw_matnr TYPE iseg-matnr.
LOOP AT t_rawdata INTO w_rawdata.
lw_matnr = w_rawdata+21(20). "RM031006
lw_matnr = w_rawdata+22(18). "RM031006
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = lw_matnr
IMPORTING
output = lw_matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
MOVE: lw_matnr TO w_stck_cnt-matnr.
w_stck_cnt-werks = w_rawdata+14(4).
w_stck_cnt-lgort = w_rawdata+18(4).
w_stck_cnt-charg = w_rawdata+84(25).
w_stck_cnt-vfdat = w_rawdata+109(8).
w_stck_cnt-lwedt = w_rawdata+117(8).
w_stck_cnt-quarn = w_rawdata+141(8).
w_stck_cnt-menge = w_rawdata+125(8).
APPEND w_stck_cnt TO t_stck_cnt.
CLEAR w_stck_cnt.
ENDLOOP.
SORT t_stck_cnt BY werks
lgort
matnr
charg.
DELETE ADJACENT DUPLICATES FROM t_stck_cnt.
ENDFORM. " pre_processing
*& Form bdc_mi09
Run file data via BDC TCODE: MI09
FORM bdc_mi09.
DATA: t_bdcdata TYPE TABLE OF bdcdata,
w_bdcdata TYPE bdcdata,
lw_datum(10) TYPE c,
lw_count(2) TYPE n.
WRITE sy-datum TO lw_datum DD/MM/YYYY.
Front Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0700'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Enter
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '/00'.
APPEND w_bdcdata TO t_bdcdata.
Count Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-ZLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Document Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-BLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Plant
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-WERKS'.
w_bdcdata-fval = w_stck_cnt-werks.
APPEND w_bdcdata TO t_bdcdata.
Storage Location
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-LGORT'.
w_bdcdata-fval = w_stck_cnt-lgort.
APPEND w_bdcdata TO t_bdcdata.
LOOP AT t_stck_cnt INTO w_stck_cnt.
Do not submit items with Errors against them
CHECK w_stck_cnt-message NE 'E' AND
w_stck_cnt-zerostck NE 'X'.
"RM220307
lw_count = lw_count + 1.
Input Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Page Down
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=P+'.
APPEND w_bdcdata TO t_bdcdata.
Material
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-MATNR(01)'.
w_bdcdata-fval = w_stck_cnt-matnr.
APPEND w_bdcdata TO t_bdcdata.
Batch
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-CHARG(01)'.
w_bdcdata-fval = w_stck_cnt-charg.
APPEND w_bdcdata TO t_bdcdata.
IF w_stck_cnt-menge NE 0.
Quantity
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-ERFMG(01)'.
w_bdcdata-fval = w_stck_cnt-menge.
APPEND w_bdcdata TO t_bdcdata.
*-- Begin RM220307 - We need to create an item when the quantity is zero
*-- in file and is non-zero in SAP
ELSE.
Zero Stock indicator
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-XNULL(01)'.
w_bdcdata-fval = 'X'.
APPEND w_bdcdata TO t_bdcdata.
*-- End RM220307
ENDIF.
ENDLOOP.
CHECK lw_count NE 0.
After all line items have been input
Final Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Save Document
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=BU'.
APPEND w_bdcdata TO t_bdcdata.
CALL TRANSACTION 'MI09' USING t_bdcdata
MODE p_mode
MESSAGES INTO t_messtab.
ENDFORM. " bdc_mi09
*& Form bdc_report
Write BDC Messages.
FORM bdc_report.
DATA: lw_text TYPE t100-text.
SKIP.
WRITE: / text-b01.
WRITE: / sy-uline(21).
SKIP.
Write BDC Messages
LOOP AT t_messtab INTO w_messtab WHERE msgspra = sy-langu.
MESSAGE ID w_messtab-msgid TYPE w_messtab-msgtyp
NUMBER w_messtab-msgnr
WITH w_messtab-msgv1
w_messtab-msgv2
w_messtab-msgv3
w_messtab-msgv4
INTO lw_text.
WRITE: / lw_text.
ENDLOOP.
ENDFORM. " bdc_report
*& Form process_checks
Perform process check before creating BDC Session
FORM process_checks.
DATA: lw_clabs LIKE mchb-clabs,
lw_menge LIKE mchb-clabs,
lw_matnr LIKE mara-matnr,
lw_charg LIKE mch1-charg,
lw_fail,
lw_vfdat TYPE mch1-vfdat,
lv_sell TYPE c, "RM191006
lv_qty(8) TYPE c. "RM191006
CLEAR: d_stck_cnt[], d_stck_cnt. "RM191006
Check if any of the stock figures differ from current stock figures
LOOP AT t_stck_cnt INTO w_stck_cnt.
lw_menge = w_stck_cnt-menge.
SELECT SINGLE clabs INTO lw_clabs
FROM mchb
WHERE matnr = w_stck_cnt-matnr
AND werks = w_stck_cnt-werks
AND lgort = w_stck_cnt-lgort
AND charg = w_stck_cnt-charg.
IF sy-subrc = 0.
IF lw_clabs NE lw_menge.
lw_fail = 'X'.
*-- Begin RM220307 - Do not create PI item if the stock is zero in the
*-- file and is zero in SAP
EXIT.
ELSEIF lw_clabs = 0 AND lw_menge = 0.
w_stck_cnt-zerostck = 'X'.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM220307
ELSE.
lw_fail = 'X'.
ERROR
ENDIF.
ENDLOOP.
If no differences are found set NO CHANGE Flag
IF lw_fail NE 'X'.
w_no_change = 'X'.
EXIT.
ENDIF.
Check for Errors in file data
LOOP AT t_stck_cnt INTO w_stck_cnt.
CLEAR lv_sell. "RM191006
SELECT SINGLE matnr INTO lw_matnr
FROM mara
WHERE matnr = w_stck_cnt-matnr.
IF sy-subrc NE 0.
Invalid Material (E)
w_stck_cnt-message = 'E'.
w_stck_cnt-msg_txt = 'Invalid Material'.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ENDIF.
SELECT SINGLE charg vfdat
INTO (lw_charg, lw_vfdat)
FROM mch1 "KOB01 - changed from MCHA
WHERE matnr = w_stck_cnt-matnr
AND charg = w_stck_cnt-charg.
AND werks = w_stck_cnt-werks.
IF sy-subrc NE 0.
Invalid Material Batch (E)
w_stck_cnt-message = 'E'.
CONCATENATE 'Invalid Material Batch for plant' w_stck_cnt-werks
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ELSE.
IF w_stck_cnt-vfdat <> lw_vfdat.
Sell by dates do not match (W)
w_stck_cnt-message = 'W'.
w_stck_cnt-msg_txt =
'Sell by Date does not match Shelf life Expiry Date'.
MODIFY t_stck_cnt FROM w_stck_cnt.
lv_sell = 'X'. "RM191006
CONTINUE. "RM191006
ENDIF.
ENDIF.
IF w_stck_cnt-quarn > 0.
Quarantine balance not Zero (W)
w_stck_cnt-message = 'W'.
*-- Begin RM191006
*-- We do want all warning messages on the report
lv_qty = w_stck_cnt-quarn.
CONDENSE lv_qty NO-GAPS.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = lv_qty
IMPORTING
output = lv_qty.
w_stck_cnt-msg_txt = 'Quarantine balance is not zero'.
CONCATENATE 'Quarantine balance is ' lv_qty '- not zero'
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
IF lv_sell = 'X'.
APPEND w_stck_cnt TO d_stck_cnt.
CLEAR lv_sell.
ELSE.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM191006
ENDIF.
ENDLOOP.
*-- Begin RM191006
*-- Finally get all the records into dummy table to report
APPEND LINES OF t_stck_cnt TO d_stck_cnt.
SORT d_stck_cnt.
DELETE ADJACENT DUPLICATES FROM d_stck_cnt.
*-- End RM191006
ENDFORM. " process_checks
*& Form file_check_report
Write warning and Error messages from File checks
FORM file_check_report.
WRITE: /2 'Material',
22 'Batch',
32 'Sell By',
45 'Message Text'.
WRITE: /2 sy-uline(115).
SKIP.
LOOP AT t_stck_cnt INTO w_stck_cnt. "RM191006
LOOP AT d_stck_cnt INTO w_stck_cnt. "RM191006
CHECK w_stck_cnt-message NE ' '.
WRITE: /2 w_stck_cnt-matnr,
22 w_stck_cnt-charg,
32 w_stck_cnt-vfdat,
43 w_stck_cnt-message,
45 w_stck_cnt-msg_txt.
ENDLOOP.
ENDFORM. " file_check_report
*& Form post_process_checks
Check Material Batches in SAP against NP File
FORM post_process_checks.
RANGES: r_matnr FOR mchb-matnr,
r_lgort FOR mchb-lgort,
r_werks FOR mchb-werks.
SORT t_stck_cnt.
LOOP AT t_stck_cnt INTO w_stck_cnt.
AT END OF matnr.
r_lgort-sign = 'I'.
r_lgort-option = 'EQ'.
r_lgort-low = w_stck_cnt-lgort.
APPEND r_lgort.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = w_stck_cnt-werks.
APPEND r_werks.
r_matnr-sign = 'I'.
r_matnr-option = 'EQ'.
r_matnr-low = w_stck_cnt-matnr.
APPEND r_matnr.
ENDAT.
ENDLOOP.
Select all material batches for NP Materials
SELECT matnr charg clabs
INTO TABLE t_batch_errors
FROM mchb
WHERE werks IN r_werks
AND lgort IN r_lgort.
IF sy-subrc EQ 0.
Check if the Material Batches are in the NP file
LOOP AT t_batch_errors INTO w_batch_errors.
Disregard Batches without positive unrestricted stock
IF w_batch_errors-clabs LE 0.
DELETE t_batch_errors.
CONTINUE.
ENDIF.
READ TABLE t_stck_cnt INTO w_stck_cnt
WITH KEY matnr = w_batch_errors-matnr
charg = w_batch_errors-charg.
IF sy-subrc = 0.
DELETE t_batch_errors.
ENDIF.
ENDLOOP.
ENDIF.
CHECK NOT t_batch_errors[] IS INITIAL.
Write Batch chak results to report
SKIP.
WRITE: / text-b02.
WRITE: / sy-uline(74).
WRITE: /2 'Material',
22 'Batch'.
WRITE: /2 sy-uline(32).
SKIP.
LOOP AT t_batch_errors INTO w_batch_errors.
WRITE: /2 w_batch_errors-matnr,
22 w_batch_errors-charg.
ENDLOOP.
ENDFORM. " post_process_checks
G E T _ I N T E R F A C E _ F I L E N A M E
FORM get_interface_filename USING filename lw_path.
DATA: i_file TYPE filename-fileintern,
out_filename LIKE v_path-pathextern.
CLEAR: out_filename.
i_file = filename.
get the interface filename to be used when creating file
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = i_file
IMPORTING
file_name = out_filename
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
MOVE out_filename TO lw_path.
IF filename NE c_archive_file. "RM080107
CONCATENATE lw_path 'NP_StockBalance.dat'
INTO lw_path.
*-- Begin RM080107 - Add timestamp to the archived file
ELSE.
CONCATENATE lw_path 'NP_StockBalance' sy-datum sy-uzeit '.dat'
INTO lw_path.
ENDIF.
*-- End RM080107
ELSE.
ENDIF.
ENDFORM. "get_interface_filename
*& Form move_file RM080107
Move the processed file to archive directory
FORM move_file.
*-- At last move the file to archive directory
OPEN DATASET p_arch FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT t_rawdata INTO w_rawdata.
TRANSFER w_rawdata TO p_arch.
ENDLOOP.
ENDIF.
CLOSE DATASET p_arch.
DELETE DATASET p_file.
ENDFORM. " move_fileHi,
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_file LIKE rlgrap-filename,
p_arch LIKE rlgrap-filename. "RM080107
SELECTION-SCREEN SKIP.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
I N C L U D E S
INCLUDE zwm_np_stock_recon_top.
INCLUDE zwm_np_stock_recon_f01.
I N I T I A L I Z A T I O N
INITIALIZATION.
PERFORM get_interface_filename USING c_interface_file p_file.
PERFORM get_interface_filename USING c_archive_file p_arch."RM080107
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
PERFORM read_file USING p_file.
PERFORM pre_processing.
E N D O F S E L E C T I O N
END-OF-SELECTION.
PERFORM process_checks.
IF w_no_change = 'X'.
WRITE: / text-b03.
WRITE: / sy-uline(34).
ELSE.
PERFORM bdc_mi09.
PERFORM file_check_report.
PERFORM bdc_report.
ENDIF.
PERFORM post_process_checks.
*-- Move the processed file to archive directory
PERFORM move_file.
...*************.........first include...................************
INCLUDE ZWM_NP_STOCK_RECON_TOP *
Data declaration ----------------------------------------------
TYPES: st_rawdata(2000) TYPE c.
TYPES: BEGIN OF st_stck_cnt,
werks TYPE iseg-werks, "plant
lgort TYPE iseg-lgort, "storage location
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
vfdat TYPE mch1-vfdat, "Sell by date
lwedt TYPE mch1-lwedt, "Manufacture date
quarn(8) TYPE n, "qaunrantine quantity
menge(8) TYPE n, "quantity on hand
message(1), "Message Type (E/W/I)
msg_txt TYPE t100-text, "Message Text
zerostck(1), "Zero stock identifier "RM220307
END OF st_stck_cnt.
TYPES: BEGIN OF st_batch_errors,
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
clabs TYPE mchb-clabs, "Stock Balance
END OF st_batch_errors.
DATA:
t_rawdata TYPE TABLE OF st_rawdata,
w_rawdata TYPE st_rawdata,
t_stck_cnt TYPE TABLE OF st_stck_cnt,
d_stck_cnt TYPE TABLE OF st_stck_cnt, "RM191006
w_stck_cnt TYPE st_stck_cnt,
t_batch_errors TYPE TABLE OF st_batch_errors,
w_batch_errors TYPE st_batch_errors,
t_messtab LIKE bdcmsgcoll OCCURS 0,
w_messtab LIKE LINE OF t_messtab,
w_no_change.
CONSTANTS: c_interface_file(26) TYPE c VALUE 'ZNP_STOCK_RECON',
c_archive_file(26) TYPE c
VALUE 'ZNP_STOCK_RECON_ARCHIVE'. "RM080107
.*************................second include..........************
***INCLUDE ZWM_NEXTPHARMA_STOKRECON_F01 .
*& Form read_file
reads NextPharma file sent through via webmethods
-->P_FILENAME
FORM read_file USING p_filename.
CLEAR: t_rawdata,
w_rawdata.
REFRESH: t_rawdata.
OPEN DATASET p_filename FOR INPUT IN TEXT MODE.
IF sy-subrc <> 0.
MESSAGE e720(01).
ENDIF.
DO.
READ DATASET p_filename INTO w_rawdata.
IF sy-subrc <> 0.
EXIT.
ELSE.
APPEND w_rawdata TO t_rawdata.
ENDIF.
ENDDO.
CLOSE DATASET p_filename.
ENDFORM. " read_file
*& Form pre_processing
Read file values into internal table
FORM pre_processing.
DATA: lw_matnr TYPE iseg-matnr.
LOOP AT t_rawdata INTO w_rawdata.
lw_matnr = w_rawdata+21(20). "RM031006
lw_matnr = w_rawdata+22(18). "RM031006
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = lw_matnr
IMPORTING
output = lw_matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
MOVE: lw_matnr TO w_stck_cnt-matnr.
w_stck_cnt-werks = w_rawdata+14(4).
w_stck_cnt-lgort = w_rawdata+18(4).
w_stck_cnt-charg = w_rawdata+84(25).
w_stck_cnt-vfdat = w_rawdata+109(8).
w_stck_cnt-lwedt = w_rawdata+117(8).
w_stck_cnt-quarn = w_rawdata+141(8).
w_stck_cnt-menge = w_rawdata+125(8).
APPEND w_stck_cnt TO t_stck_cnt.
CLEAR w_stck_cnt.
ENDLOOP.
SORT t_stck_cnt BY werks
lgort
matnr
charg.
DELETE ADJACENT DUPLICATES FROM t_stck_cnt.
ENDFORM. " pre_processing
*& Form bdc_mi09
Run file data via BDC TCODE: MI09
FORM bdc_mi09.
DATA: t_bdcdata TYPE TABLE OF bdcdata,
w_bdcdata TYPE bdcdata,
lw_datum(10) TYPE c,
lw_count(2) TYPE n.
WRITE sy-datum TO lw_datum DD/MM/YYYY.
<b>select single MATNR
WERKS
CHARG
from MCHA
into (l_matnr, l_werks, l_charg)
where matnr = w_stck_cnt-matnr
and werks = w_stck_cnt-werks.
and charg = w_stck_cnt-charg.
if sy-subrc ne 0.
continue.
endif.</b>
Front Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0700'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Enter
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '/00'.
APPEND w_bdcdata TO t_bdcdata.
Count Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-ZLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Document Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-BLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Plant
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-WERKS'.
w_bdcdata-fval = w_stck_cnt-werks.
APPEND w_bdcdata TO t_bdcdata.
Storage Location
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-LGORT'.
w_bdcdata-fval = w_stck_cnt-lgort.
APPEND w_bdcdata TO t_bdcdata.
LOOP AT t_stck_cnt INTO w_stck_cnt.
Do not submit items with Errors against them
CHECK w_stck_cnt-message NE 'E' AND
w_stck_cnt-zerostck NE 'X'.
"RM220307
lw_count = lw_count + 1.
Input Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Page Down
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=P+'.
APPEND w_bdcdata TO t_bdcdata.
Material
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-MATNR(01)'.
w_bdcdata-fval = w_stck_cnt-matnr.
APPEND w_bdcdata TO t_bdcdata.
Batch
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-CHARG(01)'.
w_bdcdata-fval = w_stck_cnt-charg.
APPEND w_bdcdata TO t_bdcdata.
IF w_stck_cnt-menge NE 0.
Quantity
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-ERFMG(01)'.
w_bdcdata-fval = w_stck_cnt-menge.
APPEND w_bdcdata TO t_bdcdata.
*-- Begin RM220307 - We need to create an item when the quantity is zero
*-- in file and is non-zero in SAP
ELSE.
Zero Stock indicator
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-XNULL(01)'.
w_bdcdata-fval = 'X'.
APPEND w_bdcdata TO t_bdcdata.
*-- End RM220307
ENDIF.
ENDLOOP.
CHECK lw_count NE 0.
After all line items have been input
Final Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Save Document
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=BU'.
APPEND w_bdcdata TO t_bdcdata.
CALL TRANSACTION 'MI09' USING t_bdcdata
MODE p_mode
MESSAGES INTO t_messtab.
ENDFORM. " bdc_mi09
*& Form bdc_report
Write BDC Messages.
FORM bdc_report.
DATA: lw_text TYPE t100-text.
SKIP.
WRITE: / text-b01.
WRITE: / sy-uline(21).
SKIP.
Write BDC Messages
LOOP AT t_messtab INTO w_messtab WHERE msgspra = sy-langu.
MESSAGE ID w_messtab-msgid TYPE w_messtab-msgtyp
NUMBER w_messtab-msgnr
WITH w_messtab-msgv1
w_messtab-msgv2
w_messtab-msgv3
w_messtab-msgv4
INTO lw_text.
WRITE: / lw_text.
ENDLOOP.
ENDFORM. " bdc_report
*& Form process_checks
Perform process check before creating BDC Session
FORM process_checks.
DATA: lw_clabs LIKE mchb-clabs,
lw_menge LIKE mchb-clabs,
lw_matnr LIKE mara-matnr,
lw_charg LIKE mch1-charg,
lw_fail,
lw_vfdat TYPE mch1-vfdat,
lv_sell TYPE c, "RM191006
lv_qty(8) TYPE c. "RM191006
CLEAR: d_stck_cnt[], d_stck_cnt. "RM191006
Check if any of the stock figures differ from current stock figures
LOOP AT t_stck_cnt INTO w_stck_cnt.
lw_menge = w_stck_cnt-menge.
SELECT SINGLE clabs INTO lw_clabs
FROM mchb
WHERE matnr = w_stck_cnt-matnr
AND werks = w_stck_cnt-werks
AND lgort = w_stck_cnt-lgort
AND charg = w_stck_cnt-charg.
IF sy-subrc = 0.
IF lw_clabs NE lw_menge.
lw_fail = 'X'.
*-- Begin RM220307 - Do not create PI item if the stock is zero in the
*-- file and is zero in SAP
EXIT.
ELSEIF lw_clabs = 0 AND lw_menge = 0.
w_stck_cnt-zerostck = 'X'.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM220307
ELSE.
lw_fail = 'X'.
ERROR
ENDIF.
ENDLOOP.
If no differences are found set NO CHANGE Flag
IF lw_fail NE 'X'.
w_no_change = 'X'.
EXIT.
ENDIF.
Check for Errors in file data
LOOP AT t_stck_cnt INTO w_stck_cnt.
CLEAR lv_sell. "RM191006
SELECT SINGLE matnr INTO lw_matnr
FROM mara
WHERE matnr = w_stck_cnt-matnr.
IF sy-subrc NE 0.
Invalid Material (E)
w_stck_cnt-message = 'E'.
w_stck_cnt-msg_txt = 'Invalid Material'.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ENDIF.
SELECT SINGLE charg vfdat
INTO (lw_charg, lw_vfdat)
FROM mch1 "KOB01 - changed from MCHA
WHERE matnr = w_stck_cnt-matnr
AND charg = w_stck_cnt-charg.
AND werks = w_stck_cnt-werks.
IF sy-subrc NE 0.
Invalid Material Batch (E)
w_stck_cnt-message = 'E'.
CONCATENATE 'Invalid Material Batch for plant' w_stck_cnt-werks
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ELSE.
IF w_stck_cnt-vfdat <> lw_vfdat.
Sell by dates do not match (W)
w_stck_cnt-message = 'W'.
w_stck_cnt-msg_txt =
'Sell by Date does not match Shelf life Expiry Date'.
MODIFY t_stck_cnt FROM w_stck_cnt.
lv_sell = 'X'. "RM191006
CONTINUE. "RM191006
ENDIF.
ENDIF.
IF w_stck_cnt-quarn > 0.
Quarantine balance not Zero (W)
w_stck_cnt-message = 'W'.
*-- Begin RM191006
*-- We do want all warning messages on the report
lv_qty = w_stck_cnt-quarn.
CONDENSE lv_qty NO-GAPS.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = lv_qty
IMPORTING
output = lv_qty.
w_stck_cnt-msg_txt = 'Quarantine balance is not zero'.
CONCATENATE 'Quarantine balance is ' lv_qty '- not zero'
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
IF lv_sell = 'X'.
APPEND w_stck_cnt TO d_stck_cnt.
CLEAR lv_sell.
ELSE.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM191006
ENDIF.
ENDLOOP.
*-- Begin RM191006
*-- Finally get all the records into dummy table to report
APPEND LINES OF t_stck_cnt TO d_stck_cnt.
SORT d_stck_cnt.
DELETE ADJACENT DUPLICATES FROM d_stck_cnt.
*-- End RM191006
ENDFORM. " process_checks
*& Form file_check_report
Write warning and Error messages from File checks
FORM file_check_report.
WRITE: /2 'Material',
22 'Batch',
32 'Sell By',
45 'Message Text'.
WRITE: /2 sy-uline(115).
SKIP.
LOOP AT t_stck_cnt INTO w_stck_cnt. "RM191006
LOOP AT d_stck_cnt INTO w_stck_cnt. "RM191006
CHECK w_stck_cnt-message NE ' '.
WRITE: /2 w_stck_cnt-matnr,
22 w_stck_cnt-charg,
32 w_stck_cnt-vfdat,
43 w_stck_cnt-message,
45 w_stck_cnt-msg_txt.
ENDLOOP.
ENDFORM. " file_check_report
*& Form post_process_checks
Check Material Batches in SAP against NP File
FORM post_process_checks.
RANGES: r_matnr FOR mchb-matnr,
r_lgort FOR mchb-lgort,
r_werks FOR mchb-werks.
SORT t_stck_cnt.
LOOP AT t_stck_cnt INTO w_stck_cnt.
AT END OF matnr.
r_lgort-sign = 'I'.
r_lgort-option = 'EQ'.
r_lgort-low = w_stck_cnt-lgort.
APPEND r_lgort.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = w_stck_cnt-werks.
APPEND r_werks.
r_matnr-sign = 'I'.
r_matnr-option = 'EQ'.
r_matnr-low = w_stck_cnt-matnr.
APPEND r_matnr.
ENDAT.
ENDLOOP.
Select all material batches for NP Materials
SELECT matnr charg clabs
INTO TABLE t_batch_errors
FROM mchb
WHERE werks IN r_werks
AND lgort IN r_lgort.
IF sy-subrc EQ 0.
Check if the Material Batches are in the NP file
LOOP AT t_batch_errors INTO w_batch_errors.
Disregard Batches without positive unrestricted stock
IF w_batch_errors-clabs LE 0.
DELETE t_batch_errors.
CONTINUE.
ENDIF.
READ TABLE t_stck_cnt INTO w_stck_cnt
WITH KEY matnr = w_batch_errors-matnr
charg = w_batch_errors-charg.
IF sy-subrc = 0.
DELETE t_batch_errors.
ENDIF.
ENDLOOP.
ENDIF.
CHECK NOT t_batch_errors[] IS INITIAL.
Write Batch chak results to report
SKIP.
WRITE: / text-b02.
WRITE: / sy-uline(74).
WRITE: /2 'Material',
22 'Batch'.
WRITE: /2 sy-uline(32).
SKIP.
LOOP AT t_batch_errors INTO w_batch_errors.
WRITE: /2 w_batch_errors-matnr,
22 w_batch_errors-charg.
ENDLOOP.
ENDFORM. " post_process_checks
G E T _ I N T E R F A C E _ F I L E N A M E
FORM get_interface_filename USING filename lw_path.
DATA: i_file TYPE filename-fileintern,
out_filename LIKE v_path-pathextern.
CLEAR: out_filename.
i_file = filename.
get the interface filename to be used when creating file
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = i_file
IMPORTING
file_name = out_filename
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
MOVE out_filename TO lw_path.
IF filename NE c_archive_file. "RM080107
CONCATENATE lw_path 'NP_StockBalance.dat'
INTO lw_path.
*-- Begin RM080107 - Add timestamp to the archived file
ELSE.
CONCATENATE lw_path 'NP_StockBalance' sy-datum sy-uzeit '.dat'
INTO lw_path.
ENDIF.
*-- End RM080107
ELSE.
ENDIF.
ENDFORM. "get_interface_filename
*& Form move_file RM080107
Move the processed file to archive directory
FORM move_file.
*-- At last move the file to archive directory
OPEN DATASET p_arch FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT t_rawdata INTO w_rawdata.
TRANSFER w_rawdata TO p_arch.
ENDLOOP.
ENDIF.
CLOSE DATASET p_arch.
DELETE DATASET p_file.
ENDFORM. " move_file
Best regards,
Prashant -
Dears
I have installed CRS 11.2.0.1 on vmware 1 at redhat 5.3 .
CRS has installed sucessfully without any error. but when execute
[oracle@RAC1 grid]$ ./runcluvfy.sh stage -post crsinst -n RAC1,RAC2 -verbose
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name Status
RAC2 passed
RAC1 passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
RAC2 Active
RAC1 Active
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Reference Time Offset Limit: 1000.0 msecs
Check: Reference Time Offset
Node Name Time Offset Status
RAC2 -4700.0 failed
RAC1 0.0 passed
Result: PRVF-9661 : Time offset is NOT within the specified limits on the following nodes:
"[RAC2]"
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
[oracle@RAC1 grid]$ After That I checked on RAC1
[oracle@RAC1 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[oracle@RAC1 ~]$
and on RAC2
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -4700
[oracle@RAC2 ~]$ But when some time ago i checked it was
oracle@RAC1 ~]$
[oracle@RAC1 ~]$ cluvfy comp clocksync -n all
Verifying Clock Synchronization across the cluster nodes
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
CTSS resource check passed
Querying CTSS for time offset on all nodes...
Query of CTSS for time offset passed
Check CTSS state started...
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Check of clock time offsets passed
Oracle Cluster Time Synchronization Services check passed
Verification of Clock Synchronization across the cluster nodes was successful.
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$
and on RAC2 is was
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -800
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -800
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -900
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -900
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -1000
[oracle@RAC2 ~]$ So, I am seeing that in RAC2, CTSS is not working properly . I don't know why it's time Offset is increasing ?
Thanks&Regards
Muhammad Abdul Halim
http://halimdba.blogspot.comDears
I have installed CRS 11.2.0.1 on vmware 1 at redhat 5.3 .
CRS has installed sucessfully without any error. but when execute
[oracle@RAC1 grid]$ ./runcluvfy.sh stage -post crsinst -n RAC1,RAC2 -verbose
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name Status
RAC2 passed
RAC1 passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
RAC2 Active
RAC1 Active
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Reference Time Offset Limit: 1000.0 msecs
Check: Reference Time Offset
Node Name Time Offset Status
RAC2 -4700.0 failed
RAC1 0.0 passed
Result: PRVF-9661 : Time offset is NOT within the specified limits on the following nodes:
"[RAC2]"
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
[oracle@RAC1 grid]$ After That I checked on RAC1
[oracle@RAC1 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[oracle@RAC1 ~]$
and on RAC2
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -4700
[oracle@RAC2 ~]$ But when some time ago i checked it was
oracle@RAC1 ~]$
[oracle@RAC1 ~]$ cluvfy comp clocksync -n all
Verifying Clock Synchronization across the cluster nodes
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
CTSS resource check passed
Querying CTSS for time offset on all nodes...
Query of CTSS for time offset passed
Check CTSS state started...
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Check of clock time offsets passed
Oracle Cluster Time Synchronization Services check passed
Verification of Clock Synchronization across the cluster nodes was successful.
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$
and on RAC2 is was
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -800
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -800
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -900
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -900
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -1000
[oracle@RAC2 ~]$ So, I am seeing that in RAC2, CTSS is not working properly . I don't know why it's time Offset is increasing ?
Thanks&Regards
Muhammad Abdul Halim
http://halimdba.blogspot.com -
Anchor links to accordion panels not working properly across browsers
Hi everyone,
I need some help to figure out why my anchor links to specific accordion panels on another page are not working properly across browsers.
I have a Map page which has tooltips on mouseover on the site markers. 15 of the tooltips have "Click here for information" anchor links (although only 14 are currently linked) which, in theory, would take you to the Nurseries page where the specified accordion panel would be opened with the nursery entry appearing at the top of the new browser window.
Here are the links to the Map page and Nurseries page, respectively:
www.alegriadesignstudio.com/RFRI/map_v6.html
www.alegriadesignstudio.com/RFRI/nurseries_v6.html
I've tested the anchor links on IE, Firefox, Google Chrome, and Safari, and have received varying results. In most cases, the anchor links worked perfectly on two of the browsers, while on the other browsers, the correct accordion panel is opened but the nursery entry does not appear at the top of the new browser window. Anchor links using Safari and Google Chrome fared better (10 out of 14 links worked properly, and 8/14, respectively), whereas when using Firefox and IE, only 3 anchor links worked properly. The target audience for this website will be using IE and Firefox, so I would appreciate any help to figure out how to tweak the code so that the most, if not all, anchor links work properly on these two browsers in particular.
Here's an anchor link which worked perfectly in IE, GC, and Safari, but in FF, the entry did not appear at the top of the new browser window.
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem
http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem [To access the anchor link on the Map page, mouseover the third green dot from the top of the map (Tooltip--Location: Mangatarem) and then click on "Click here for information."]
Here's a sample anchor link in which the entry did not appear at the top of the new browser window in any of the 4 browsers:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel [To access the anchor link on the Map page, go to "Mindanao" at the bottom of the map and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Brgys. Amabel, Bongolanon, Imamaling, & Manobisa; Magpet; North Cotabato) and then click on "Click here for information."]
Here's a sample anchor link in which the anchor link worked properly in GC and Safari, but the entry didn't appear at the top of the browser window in IE and FF:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar [To access the anchor link on the Map page, go to the small island north and a bit west of "Mindanao" which is called "Bohol" and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Bilar; Bohol) and then click on the first "Click here for information."]
Many thanks in advance for your assistance!
JoyHi everyone,
I'm still trying to figure out how to resolve the problem of anchor links to accordion panels not working properly across browsers (see original post for details). I would greatly appreciate any suggestions on how to resolve the problem.
Many thanks in advance.
Joy -
Not working properly Computer Browser service in Windows Server 2012
Good afternoon.
Migrated from 2003 to 2012 Active Directory, all is good, but the service Computer Browser in Windows Server 2012 is not working properly.
Online, there are several hundred computers, one network, no segments. PDC is the Master Browser, it is in my list of all the computers, but gives customers or Backup Browser computers only part, and in alphabetical order, giving the first 70 computers and
all.
Looked packet sniffer:
Microsoft Windows Lanman Remote API Protocol
Entry Count: 70
Available Entries: 251
So on Master Browser shows 251 computer, and the client 70.
If disabled on Windows Server 2012 Service Computer Browser, Master Browser is a computer running Windows Server 2003. He gives all computers.
What is the problem, how to get Windows Server 2012 to work correctly as a Master Browser?More info. I have high lighted in bold where the issue is. This is a massive headache for me at the moment
Frame: Number = 377, Captured Frame Length = 182, MediaType = ETHERNET
- Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-13-72-52-6E-A1],SourceAddress:[00-1E-0B-2B-68-DD]
- DestinationAddress: Dell Inc. 526EA1 [00-13-72-52-6E-A1]
Rsv: (000000..)
UL: (......0.) Universally Administered Address
IG: (.......0) Individual address (unicast)
- SourceAddress: 001E0B 2B68DD [00-1E-0B-2B-68-DD]
Rsv: (000000..)
UL: (......0.) Universally Administered Address
IG: (.......0) Individual address (unicast)
EthernetType: Internet IP (IPv4), 2048(0x800)
- Ipv4: Src = 10.44.46.101, Dest = 10.44.44.14, Next Protocol = TCP, Packet ID = 14025, Total IP Length = 168
- Versions: IPv4, Internet Protocol; Header Length = 20
Version: (0100....) IPv4, Internet Protocol
HeaderLength: (....0101) 20 bytes (0x5)
- DifferentiatedServicesField: DSCP: 0, ECN: 0
DSCP: (000000..) Differentiated services codepoint 0
ECT: (......0.) ECN-Capable Transport not set
CE: (.......0) ECN-CE not set
TotalLength: 168 (0xA8)
Identification: 14025 (0x36C9)
- FragmentFlags: 16384 (0x4000)
Reserved: (0...............)
DF: (.1..............) Do not fragment
MF: (..0.............) This is the last fragment
Offset: (...0000000000000) 0
TimeToLive: 128 (0x80)
NextProtocol: TCP, 6(0x6)
Checksum: 0 (0x0)
SourceAddress: 10.44.46.101
DestinationAddress: 10.44.44.14
- Tcp: Flags=...AP..., SrcPort=65372, DstPort=NETBIOS Session Service(139), PayloadLen=128, Seq=1910965363 - 1910965491, Ack=580319796, Win=252 (scale factor 0x8) = 64512
SrcPort: 65372
DstPort: NETBIOS Session Service(139)
SequenceNumber: 1910965363 (0x71E70473)
AcknowledgementNumber: 580319796 (0x2296FA34)
- DataOffset: 80 (0x50)
DataOffset: (0101....) 20 bytes
Reserved: (....000.)
NS: (.......0) Nonce Sum not significant
- Flags: ...AP...
CWR: (0.......) CWR not significant
ECE: (.0......) ECN-Echo not significant
Urgent: (..0.....) Not Urgent Data
Ack: (...1....) Acknowledgement field significant
Push: (....1...) Push Function
Reset: (.....0..) No Reset
Syn: (......0.) Not Synchronize sequence numbers
Fin: (.......0) Not End of data
Window: 252 (scale factor 0x8) = 64512
Checksum: 0x6F65, Disregarded
UrgentPointer: 0 (0x0)
TCPPayload: SourcePort = 65372, DestinationPort = 139
- Nbtss: SESSION MESSAGE, Length =124
PacketType: SESSION MESSAGE, 0(0x00)
- Flags: Add 0 to Length
Reserved: (0000000.)
Extension: (.......0)Add 0 to Length
Length: 124(0x7C)
- SMB: C; Transaction, Remote Administration Protocol, FileName = \PIPE\LANMAN
Protocol: SMB
Command: Transaction 37(0x25)
- NTStatus: 0x0, Facility = FACILITY_SYSTEM, Severity = STATUS_SEVERITY_SUCCESS, Code = (0) STATUS_SUCCESS
Code: (................0000000000000000) (0) STATUS_SUCCESS
Facility: (...0000000000000................) FACILITY_SYSTEM
Customer: (..0.............................) NOT Customer Defined
Severity: (00..............................) STATUS_SEVERITY_SUCCESS
- SMBHeader: Command, TID: 0x2001, PID: 0x276C, UID: 0x3801, MID: 0x0140
- Flags: 24 (0x18)
LockAndRead: (.......0) LOCK_AND_READ and WRITE_AND_UNLOCK NOT supported (Obsolete) (SMB_FLAGS_LOCK_AND_READ_OK)
NoAck: (......0.) An ACK response is needed (SMB_FLAGS_SEND_NO_ACK[only applicable when SMB transport is NetBIOS over IPX])
Reserved_bit2: (.....0..) Reserved (Must Be Zero)
CaseInsensitive: (....1...) SMB paths are case-insensitive (SMB_FLAGS_CASE_INSENSITIVE)
Canonicalized: (...1....) Canonicalized File and pathnames (Obsolete) (SMB_FLAGS_CANONICALIZED_PATHS)
Oplock: (..0.....) Oplocks NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK)
OplockNotify: (.0......) Notifications NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK_NOTIFY_ANY)
FromServer: (0.......) Command - SMB is being sent from the client (SMB_FLAGS_SERVER_TO_REDIR)
- Flags2: 51207 (0xC807)
KnowsLongFiles: (...............1) Understands Long File Names (SMB_FLAGS2_KNOWS_LONG_NAMES)
KnowsEas: (..............1.) Understands extended attributes (SMB_FLAGS2_KNOWS_EAS)
SmbSecuritySignature: (.............1..) Security signatures enabled (SMB_FLAGS2_SMB_SECURITY_SIGNATURE)
Compressed: (............0...) Compression Disabled for REQ_NT_WRITE_ANDX and RESP_READ_ANDX (SMB_FLAGS2_COMPRESSED)
SecuritySignatureRequired: (...........0....) Security Signatures are NOT required (SMB_FLAGS2_SMB_SECURITY_SIGNATURE_REQUIRED)
Reserved_bit5: (..........0.....) Reserved (Must Be Zero)
IsLongName: (.........0......) DO NOT use Long File Names (SMB_FLAGS2_IS_LONG_NAME)
Reserved_bits7_9: (......000.......) Reserved (Must Be Zero)
ReparsePath: (.....0..........) NOT a Reparse path (SMB_FLAGS2_REPARSE_PATH)
ExtendedSecurity: (....1...........) Aware of extended security (SMB_FLAGS2_EXTENDED_SECURITY)
Dfs: (...0............) NO DFS namespace (SMB_FLAGS2_DFS)
Paging: (..0.............) Read operation will NOT be permitted unless user has permission (NO Paging IO) (SMB_FLAGS2_PAGING_IO)
NTStatus: (.1..............) Using 32-bit NT status error codes (SMB_FLAGS2_NT_STATUS)
Unicode: (1...............) Using UNICODE strings (SMB_FLAGS2_UNICODE)
PIDHigh: 0 (0x0)
SecuritySignature: 0x0
Unused: 0 (0x0)
TreeID: 8193 (0x2001)
ProcessID: 10092 (0x276C)
UserID: 14337 (0x3801)
MultiplexID: 320 (0x140)
- CTransaction:
WordCount: 14 (0xE)
TotalParameterCount: 32 (0x20)
TotalDataCount: 0 (0x0)
MaxParameterCount: 8 (0x8)
MaxDataCount: 4200 (0x1068)
MaxSetupCount: 0 (0x0)
Reserved: 0 (0x0)
- Flags: Do NOT disconnect TID
Disconnect: (...............0) Do NOT disconnect TID
NoResponse: (..............0.) Server response to the client
Reserved: (00000000000000..) Reserved
Timeout: 5000 milli sec(s)
Reserved2: 0 (0x0)
ParameterCount: 32 (0x20)
ParameterOffset: 92 (0x5C)
DataCount: 0 (0x0)
DataOffset: 0 (0x0)
SetupCount: 0 (0x0)
Reserved3: 0 (0x0)
ByteCount: 61 (0x3D)
- RemoteAPIBuffer:
- FileName: \PIPE\LANMAN
- Align: 1 Bytes
AlignBytes: Binary Large Object (1 Bytes)
Name: \PIPE\LANMAN
Pad1: Binary Large Object (2 Bytes)
- RAPRequest: NetServerEnum2 Request, InfoLevel = 1, SV_TYPE_ALL: All in NSNET
RAPOpcode: NetServerEnum2
- ParameterDescriptor: WrLehDz; 4 send, 1 receive parameter
Param: (W) WORD (send parameter, 16 bit integer)
Param: (r) Receive buffer (format in data descriptor) (receive data, 0 bit integer)
Param: (L) Receive buffer length (send/receive parameter, 16/16 bit integer)
Param: (e) Entries read (receive data, 0 bit integer)
Param: (h) WORD (receive parameter, 16 bit integer)
Param: (D) DWORD (send parameter, 32 bit integer)
Param: (z) ASCIIZ (send parameter, 8 bit integer)
Param: ASCII NUL (string terminator)
- DataDescriptor: B16BBDz; data bytes send: 0, receive: 34
- Datum: (B) BYTE[16] (receive data, 8 bit integer)
Datum: (B) BYTE (receive data, 8 bit integer)
Digit: 1
Digit: 6
Datum: (B) BYTE (receive data, 8 bit integer)
Datum: (B) BYTE (receive data, 8 bit integer)
Datum: (D) DWORD (receive data, 32 bit integer)
Datum: (z) ASCIIZ* (receive data offset, 32 bit integer)
Datum: ASCII NUL (string terminator)
- NetServerEnum2: SV_TYPE_ALL: All in NSNET
InfoLevel: (1) SERVER_INFO_1
ReceiveBufferSize: 4200 (0x1068)
- ServerType: SV_TYPE_ALL: All
Workstation: (...............................1) All workstations
Server: (..............................1.) All computers with the server service running
Sqlserver: (.............................1..) All running Microsoft SQL Server
DomainCtrl: (............................1...) All primary domain controllers
DomainBakctrl: (...........................1....) All backup domain controllers
TimeSource: (..........................1.....) All Time servers
AFP: (.........................1......) All Apple File Protocol servers
Novell: (........................1.......) All Novell servers
DomainMember: (.......................1........) All LAN Manager 2.x domain members
PrintqServer: (......................1.........) All print servers
DialinServer: (.....................1..........) All dial-in servers
ServerUnix: (....................1...........) All Unix/Xenix servers
NT: (...................1............) All Windows NT workstations or servers
WFW: (..................1.............) All Windows for Workgroups servers
ServerMFPN: (.................1..............) All Microsoft File and Print for NetWare servers
ServerNT: (................1...............) All non-domain controller servers
PotentialBrowser: (...............1................) All servers that can run the browser service
BackupBrowser: (..............1.................) All backup browsers
MasterBrowser: (.............1..................) All master browsers
DomainMaster: (............1...................) All domain master browsers
Reserved1: (..........11....................)
Windows: (.........1......................) All Windows 95 or later
DFS: (........1.......................) All DFS root servers
ClusterNT: (.......1........................) All NT Clusters
Terminalserver: (......1.........................) All Terminal Servers
ClusterVSNT: (.....1..........................) All NT Cluster Virtual Server Names
DCE: (....1...........................) AllIBM DSS (Directory & Security Services)
Reserved2: (...1............................)
AlternateXport: (..1.............................) Return list for alternate transport
LocalListOnly: (.1..............................) Return local list only
DomainEnum: (1...............................) Enumerate primary domain
Domain: NSNET
Then the reply;
Frame: Number = 378, Captured Frame Length = 1514, MediaType = ETHERNET
+ Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-1E-0B-2B-68-DD],SourceAddress:[00-13-72-52-6E-A1]
+ Ipv4: Src = 10.44.44.14, Dest = 10.44.46.101, Next Protocol = TCP, Packet ID = 27036, Total IP Length = 1500
+ Tcp: Flags=...A...., SrcPort=NETBIOS Session Service(139), DstPort=65372, PayloadLen=1460, Seq=580319796 - 580321256, Ack=1910965491, Win=253 (scale factor 0x8) = 64768
+ Nbtss: SESSION MESSAGE, Length =2013
+ SMB: R; Transaction, Remote Administration Protocol
- RAPResponse: NetServerEnum2 Response, Count = 31
Win32ErrorCode: 0x00000000 - ERROR_SUCCESS - The operation completed successfully.
Converter: 2251 (0x8CB)
- NetServerEnum2: Count = 31
EntriesReturned: 31 (0x1F)
EntriesAvailable: 31 (0x1F)
+ NetServerInfo1: APOLLO
+ NetServerInfo1: ARTEMIS
+ NetServerInfo1: ASKLEPIOS
+ NetServerInfo1: CASTOR
+ NetServerInfo1: DCC4503-131L
+ NetServerInfo1: DCC4503-155L
+ NetServerInfo1: DCC4503-157L
+ NetServerInfo1: DCC4503-161L
+ NetServerInfo1: DCC4503-171L
+ NetServerInfo1: DCC4503-172L
+ NetServerInfo1: DCC4503-175L
+ NetServerInfo1: DCC4503-177L
+ NetServerInfo1: DCC4503-183L
+ NetServerInfo1: DCC4503-184L
+ NetServerInfo1: DCC4503-185L
+ NetServerInfo1: DCC4503-188L
+ NetServerInfo1: DCC4503-196L
+ NetServerInfo1: DCC4503-197L
+ NetServerInfo1: DCC4503-199L
+ NetServerInfo1: DCC4503-202L
+ NetServerInfo1: DCC4503-203L
+ NetServerInfo1: DCC4503-205L
+ NetServerInfo1: DCC4503-210L
+ NetServerInfo1: DCC4503-213L
+ NetServerInfo1: DCC4503-219L
+ NetServerInfo1: DCC4503-220L
+ NetServerInfo1: DCC4503-228L
+ NetServerInfo1: DCC4503-233L
+ NetServerInfo1: DCC4503-234L
+ NetServerInfo1: DCC4503-236L
+ NetServerInfo1: DCC4503-241L
StringData: Binary Large Object (586 Bytes) -
Routine is not working properly?
Expert's please tell me is there any problem with this routine?
Because this routine is not working properly.It is not populating to all the fields the RESULT value.
if
COMM_STRUCTURE-/BIC/ZVEN_NAME = 'VENDOR1' or
COMM_STRUCTURE-/BIC/ZVEN_NAME = 'VENDOR2'.
result value of the routine
RESULT = 'YEPSILON'.
ELSE.
RESULT = COMM_STRUCTURE-/BIC/ZVEN_NAME.
ENDIF.
Thanks in advance.
vasu.Vasu,
Here is the sample code which i have tried out in my system: its working properly, please find the same.
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
IF
COMM_STRUCTURE-/BIC/YSLSTDP3 = '08.2007' or
COMM_STRUCTURE-/BIC/YSLSTDP3 = '09.2007'.
result value of the routine
RESULT = 200000.
ELSE.
RESULT = COMM_STRUCTURE-/BIC/YSLSTDP3.
ENDIF.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
*****Assign Points*****
Thanks,
Gattu -
Scanner is not working properly
My scanner is not working properly .It used to work properly .Recently I had just changed the Black catridges with new ones .The catridges were purchased from HP online store itself .
I am not sure whether the issue is occuring after the catridge replacement .Whenever I am trying to scan I am getting a completly black page with some stripes towards one end ..Welcome to the forums @Sangeetha123 !
I read your post about the scanning problems you're experiencing with your Deskjet Ink Advantage 2060 when scanning to your Windows XP system, and I hope to help you!
I want to start off pretty basic and have you make a copy from the front of the printer. Make a copy in black and white, and also a color copy. Please let me know what the results are from making those copies.
If there is any issues with the copies, try a power reset (below instructions), and make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors.
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
I hope to hear back from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Photoshop not working properly after new installation
I have a brand new Dell desktop that runs windows 8. I installed the Adobe Creative Suite 5.5 Master Collection and got a message saying that there were errors during installation and some things might not work properly. I uninstalled and did it a second time. Same message.
I then spoke with an Adobe agent that helped me download a program to detect what the errors were. He said they were minor issues and shouldn't affect the programs. No help there.
I then spent hours today speaking with Dell on the phone and the rep took remote control of the computer and did a diagnostics check on the hardware. He said everything is fine. I asked him if it might be the video card needing an update so he ran an update. Same issues, no change.
We changed the compatability to windows 7 and still no change.
I then uninstalled the creative suite and tried installing it from the desktop. Still same problems.
These are the issues in photoshop:
1)When using certain tools (transform tool, crop tool) the images goes completely black.
2) The background switches at random- sometimes checkered, sometimes grey, and sometimes black.
3) Color saturation is incorrectly represented. It switches whenever it wants. For instance, when I zoom in and out it changes.
In Adobe Bridge some of the RAW images don't show in the program. Some I just can't open. Others open fine. Those images will open in Photoshop but not in Bridge.
So I have no idea what to do and this is becoming extremely frustrating. I should add I haven't had any problems with Lightroom and it works fine as far as I can tell.
What could be causing these issues? Could the install CD be damaged?I turned off the GPU in Photoshop's preferences as you suggested and everything seems to work properly now in Photoshop. In Adobe bridge the files are also all showing now and there doesn't seem to be the same issue there either.
I also tried enabling the GPU and changing it to Basic and it continues to work, but when it is changed to advanced when enabled the problems arise again.
So it seems as though the problem is with the video card or its driver as you said. I am not 100% sure that the Dell rep updated the driver from AMD but I am pretty sure he did. I did go to the AMD website and ran a program to detect if the driver needs to be updated and it resulted in a message saying that the driver is up to date and current.
As you said this is just a temporary solution and I want to make sure I have a working GPU system. What do you think the problem is then? How would you suggest I proceed? Should I contact Dell and tell them the problem seems to be with the installed video card?
Maybe you are looking for
-
Can anyone help with associate my new iPhone with iTunes? My other old devices are there, but I see only how to delete one, not how to add one. Thank you.
-
If I rent a movie to watch, do you have to watch it straight away? Or do you download it to watch at a later date - and if so how long is it there for? Do you have a expiry date on it?Thanks.
-
Mass Delete Purchasing Info Records
Is there a way to flag a standard info record EINA-LOEKZ in mass maintenance MEMASSIN for several materials across several different vendors? I can select EINA-LOEKZ in MEMASSIN then choose selection fields and pull down the material and vendor. But
-
I'm stuck in making archive Let me explain what i want exactly. Here is the main (index.php) file. Download it and check out the links on the headlines and news. I have made a link for the top news with the name of that file (detail1.php) Here's the
-
why is my computer booting up slow,can the battery have anything to do with it?