Total Stock - Restricted our Dependencies the batch (lot) - MMBE

That is our demand:
We need to move a balance of stock (by MB1B) to a "restricted use" = limited ... Today, it is possible only if the batch (lot) activation. I need to do this without the use of lot.
Is there some special configuration to movements or note that could be applied to modify the [dependency] in view of balance of stock?

restricted use is a batch status, so it is only possible with batches.

Similar Messages

  • Stock report based on the batch

    Hi Experts,
    I am designing stock ageing report based on last goods reciept date which is the attribute of the batch.
    the stock value in the buckets need to be calculated based on the stock quantity with moving average price.
    the report is o/p is based on material group, material, batch.
    when i drill dow based on the material it is coming fine when i drill down based on the batch it is not showing any values in the buckets.
    considering the moving average price from masterdata enhancement of 0MAT_PLANT datasource.(but this datasource doen't have batch).
    Please suggest your ideas.
    Regards,
    Satya

    I am not too sure how to explain step by step..but my system uses this design..not created by me.
    RESULT = SOURCE_FIELDS-SALK3  / SOURCE_FIELDS-LBKUM.
        IF RESULT IS INITIAL.
         RESULT = SOURCE_FIELDS-VERPR / SOURCE_FIELDS-PEINH.
    matl valuations:
    Try using tables MBEWH --(customised) and extract to DSO along with 0IC_C03.
    Also use the datasource : 0CO_PC_ACT_05
    SO Valuations:
    EBEWH -customised
    Try this link:
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=235670765
    Edited by: SAP BI Learner on Oct 28, 2011 4:27 AM

  • Quantity Total Stock is incorrect in the report

    0TOTALSTCK (Quantity Total Stock) is a non-cumulative key figure in the standard cube 0IC_C03 (Material Movements). The user is running a report for September month (01.09.2008 to 30.09.2008). At the end of the month i.e., 30.09.2008 the total stock is 0 in R/3, But in the BW reoprt it is showing as -19,000 which is incorrect.
    How can I check how the that value is calculated in the report? I can't see that key figure in the Infocube content preselection screen. In the definition of key figure,  it is calculated throgh Inflow and Outflow and mentioned arregation as Summation and Exception aggregation as Last Value. Is it correct? It should be linked with 0CALDAY for checking the stock day by day. How does it know?
    Any setting has to be done in the Report in order to get the correct values for the total stock qty?
    Please reply asap.

    Shiva,
    Inventory is calculated as a non cumulated KF which is aggregated based on stock receipts and stock outflows based on an opening stock marker. Think of this as something like a bank passbook where only debits and credits are entered and accordingly the balance is calculated. The Brought Forward line on your passbook is similar to the marker where once a page is completed the last available balance is updated.....
    only things which are not to be done in MM are :
    1. Compression without marker update - this corrupts the MM stock values.
    Also make sure you update the marker properly. The only solution to your case would be to do a full recon between the cube / R/3 and accordingly re-init / update the marker etc.
    Arun

  • How to find total stock in a plant

    Hi.
    iam an abap developer i need to print a report which shows material and  total stock in plant.tell me filed name which display total stock
    Thank you,
    madhu

    Hi
    The plant stocks are stored in these tables
    MARD Storage Location Data for Material
    MCHB Batch Stocks
    MKOL Special Stocks from Vendor
    MSKA Sales Order Stock
    MSKU Special Stocks with Customer
    MSLB Special Stocks with Vendor
    MSPR Project Stock
    you can get the Stokc filed from the tables.
    Thanks & Regards
    Kishore

  • How to calculate total stock quantity in cube

    Dear Master
        I want to verify the data between BI report and cube whether correct or not.My report name is stock summary. It's giving report for Total quantity stock (0TOTALSTCK) for paricular date. This KF(0TOTALSTCK) inflow is 0RECTOTSTCK and outflow is 0ISSTOTSTCK. Somebody telling to get the Total quantity stock (0TOTALSTCK) value, I have to use following formula 0RECVS_VAL (Value Received into Valuated Stock) - 0ISSVS_VAL (Value issued from valuated stock). Please advice me which formula should I use to get the total stock quantity?.
    Thanks a lot in advance
    Raja

    Please let met understand better, you have the following keyfigures:
    - Receipts (Cumulative)
    - Issues (Cumulative)
    - Difference (Cumulative) populated during URules = Receipts - Issues (any routine with elaborated calculation behind?
    - Stock (non-cumulative InFlow = Receipts, OutFlow = Issues)...
    Is this correct?
    Olivier.

  • How validate Total Stock ?

    hi guys ....i´ve used the 2LIS_03_BF BX for calculate stocks in BW i've made an initialization and load historically material movements and activate the delta ...but i have a problem..i review my querys and the "in" stock movement and "out" stock movement are OK but the Total Stock Value are not OK i run the reports MMBE MB5B in R3 in order to validate the values but the Total Stock Value is not the same....
    There`s any specific report in R3 for view that information ...........or maybe there another key figure for Total Stock ....i follow the "How to" pdf for inventory management and i have made complete loads....but i cant validate that value
    Regards
    Message was edited by: Oscar Diaz

    Ok, the 0TOTALSTOCK value is the total number of peices of both valuated stock and non-valuated stock.
    For instance, if you run (in R/3) MB5L for the plant/valuation area/material in question, for either the current period, ending last period, or end of previous year, you get some values, of valuated stock.
    If you look in MMBE, you may see valuated and non-valuated stock, that is what your TOTALSTOCK should agree with.
    Compare this with BIW...are they the same for the same period? If so, the quantities almost have to be correct. But for TOTALSTOCK, it is a bit different, TOTALSTOCK includes all VALUATED STOCK, but with the addition of items that you don't valuate, maybe containers, project stock or other types of stock.
    First I would validate your valuated stock. Let me know how that number looks. If it is correct, you may want to search OSS, I remember some notes about the 0TOTALSTOCK value and how you may have to change (update rules) according to some specific requirements.
    Also, remember, you want to exclude Comsumption values (in the update rules you should be deleting these, unless you created KF's to keep these figures!).
    Cheers!
    /smw

  • IDOC for distributing Batch/Lot data

    Dear Experts,
    Which IDOC should be used to distribute the batch/lot (tables MCHA, MCHB, MCH1 / transaction MSC1N, MSC2N) create and changes?
    Thank you very much.

    Hi,
    BATMAS - Replicate Batch is not working for deletion indicator                         
    "Batch Deletion flag at a Plant  "...
    Could you please tell me which segment I should check for deletion indicator for batches in BATMAS...
    Your help is greatly appreciated...
    Regards,
    Geetha

  • Is possible Block the batch stock  in the run MRP

    Dear gurus,
    i have a stock in the batch A , is possible block the stock for run MRP ( don't see the stock in the esecution MRP ) and create a planned order?
    Thanks a lot
    Daniele Pistilli
    PP TEAM

    Dear
    MRP can't be run on Batch and the stock of the batch should be transferd to special stock like QI , Block stock  so that MRP do not consider during Net Requirement Calcualtion  even it is avaliable in the same storage loaction which is relevent for MRP run .
    Basically , In order to exclude few Batches stock from MRP, SAP has come up with different categories of stock like blocked stock, restricted-use stock... etc.
    you can transfer these stock into blocked/restricted use stock and enable the respective check box in T-code: OPPQ in "Available Stocks'Option (Maintain Plant Paramters screen) -Here Mark Block Stock so that MRP will not cosider the same .
    After transfer of stock & Check Box enabled in OPPQ, execute MRP, system will not consider this stock.
    Hope it helps
    Regars
    JH
    Edited by: Jiaul Haque on Dec 21, 2010 1:09 PM
    Edited by: Jiaul Haque on Dec 21, 2010 1:11 PM

  • In Migo,the batch managed material automatically goes into restricted sk.

    Hi
    In Migo,the batch managed material automatically goes into the restricted stock.The batches are created at the time of receiving and i want it to be receive it in unrestricted stock.
    Note:The batches are received at the time of receiving.
    Regards:Vijay

    do your customizing in IMG > Logistics General > batch management > Specify Batch Level and Activate Status Management
    there is a button for initial status for new batch.
    make sure that there is no flag in the status column of the entries shown.

  • Change "Vendor batch" data in the inspection lot

    Hi gurus,
    I have created an inspection lot. It is created in automatic once the GR is made.
    But, I have introduce the wrong "Vendor batch" and the inspection lot has the incorrect data there.
    How I can change the "Vendor batch" data in the inspection lot?
    This field is showed as greyed in the transaction QA02.
    Many thanks in advance for your help!
    Kind regards,
    SP

    Hi Sandra,
    Iam not sure about the option to change the Vendor Batch but i can Suggest the other option. i.e Cancellation of GR and creating the new one.
    1. First remove the 01 inspection type in Quality Management tab in Material master,
    2. Go to goods receipt in MIGo and put 102 movement type and do the reversal.
    Now the stock is in the order level. and you can do the GR again.
    Activate the QM tab before doing the 2nd GR.
    revert back for clarifications if any.

  • Un-restricted total stock for Plant/Material/StLoc combo, Split-val & WBS

    Hi
    Users need  Un-restricted total stock for combination Plant/Material/StLoc combination ; we have MARD-LABST.
    Further, needs WBS & split -Valuation materials stock in the same report or SQVI. I tried to create SQVI, but it`s giving WBS stock as multiple times for SLocs.
    I`m using tables QBEW,MSPR,MCHB in the table join.
    Pls advise me suitable solution as Std SAP report or SQVI.
    Thanks,
    Ganesh

    Thanks for reply.
    But, I need unstricted stock for Mat/Plant/StLoc also to be displayed in the same report .i.e. MARD-LABST.
    The MBBS gives stock at Plant level for WBS.
    Can both be clubbed? Or need to get from separate reports?
    Rgds,
    Ganesh

  • How to break down the total stock level in multiple items ECC6.0 ERP

    Have a requirement for being able to break down the total stock of material into multiple items.
    E.g.
    Total stock: 1000 mtr. Unr.
    Consists of lenghts of:
    500 mtr.
    200 mtr.
    200 mtr.
    100 mtr.
    The different stocks should be displayed to sales persons and also 3rd party web applications towards customers
    Using 3rd party WMS system for all LE processes and currently handling this requirement using batch management, but using batch management also has some really strict rules which is why I would like to find other solutions
    Searching for any methods to solve this problem.
    Regards.
    Robin

    If tracking each "size " is important, then you can go for a seperate material code itself for each size.
    eg: 1000mtr = A
    500 mtr= B etc .
    you can show conversion of 1000 Mtr -> 500 MTR by subcontracting/ production /material t material transfer.
    -We had used split valuation in one clients system, where they wanted to track the Uncut Iron rods and iron rods cut into different sizes seperately .
    -Some  people use batch management with characteristics as well .
    Cnsidering your system is in live stage,  you have to consider the impact of each type of change.

  • Transaction to view the Batch Stock as on any date

    Is there any Transaction to view the Batch Stock as on any date?
    Regrads
    Soumen

    I had already tried this. But it does not show the batches, it shows the material docs with batches.
    I want like this:
    Material                Batch S                    Stock
    Regards

  • How do I select and email a whole lot of photos on my iPad from my iPad emails? It seems I have to go into Email and then insert one photo at a time? Isn't there a way to select all in the photos and then email the batch.?

    How do I select and email a whole lot of photos on my iPad from my iPad emails? It seems I have to go into Email and then insert one photo at a time? Isn't there a way to select all in the photos and then email the batch.?

    Actually, you can email up to 5 at a time from the Photos app. Select any more and the email share option will not appear.
    If you explain why you need to email large numbers of photos, we might be able to offer an alternative.

  • HT201272 In 2008, 2009, 2010, I bought all seasons of a lot of TV series. I backed them all up on WD Passports. Now I've lost them all. After I backed them up, I bought a new iMac. I had to old one totally wiped clean and had the OS re-installed. Can the

    In 2008, 2009, 2010, I bought numerous seasons of a lot of TV seasons. I backed them up on a WD Passport, then bought a new iMac and had my old one totally cleaned and re-installed the OS. Is there a way to recoup these purchases! I probably have close to $3000 invested in these.

    Thank you! 
    I can't tell you how terrified I was when deleting the superfluous account...but it went just swimmingly!

Maybe you are looking for