Totally disgusted with FIOS

I just spent the last hour with FIOS support because I'm unable to watch an Ondemand movie on DirecTV. I was 20 minutes into the movie and received the notice that my internet connection was poor and that the only way to watch the movie was to record it and watch it later. I tried that but the movie wouldn't download. It stalled for approximately 20 minutes and then started to SLOWLY download.
In my conversation with FIOS I was told that having multiple devices connected was the problem (an iPad, 2 phones and this computer). I responded that I didn't have that problem with Comcast (because I didn't) and now that I was in a 2 year contract with FIOS (which Comcast also didn't have), what was I to do? No answer was provided. I also experience slow response when I try to watch a simple news video on USA today or some other site.
I've upgraded my router (after I was told that the original one that FIOS gave me wouldn't handle my subscription...why would they provide a router that wouldn't support the speed I paid for) but I'm still having problems.
Any suggestions how to get out of the FIOS contract?

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
Please keep all correspondence regarding your issue in the private support portal.

Similar Messages

Totally Disgusted with this release

Yesterday I downloaded and installed iTunes 7 on a machine that was previously running 6 with absolutely no problems. Everything (and I mean EVERYTHING) went to ratshit. It now takes 7.5 minutes (yes minutes) to recognize that I have connected my iPod (60Gb video version). The main iTunes window s deaf for up to 5 minutes at a time while it's busy doing "something" (this by the way is just a worse version of a long standing symptom whereby the main window is deaf to mouse input when it's "busy"). Performance of my machine, in general, went down, and to cap it all off, my songs (>8000 of them) sound like crap when they're played, and several tracks just "disappeared" from the library.
In many years of owning and operating a computer I've never seen a software release this bad, not even from Microsoft, and that's surely saying something. Shame on you Steve Jobs, and shame on your release staff.

To say they least, I just do not know who to contact as the 150 option is a one way ticket to India
If anyone from this company could actually be bothered to read the problems and actually take on board customer feedback, they might actually retain some customers, and dare I say it have satisfied customers.
At the end of the day, how hard is it to employ properly trained people, ideally from the UK? Because I thought it was supposed to be a British Company?

Any leads on bidirectional amps that work with FIOS?

I recently added a TV in my house, and splitting the signal caused my primary TV to begin pixellating on a number of channels (e.g. ESPNHD), and completely drop out on others (e.g. Sprout). Adding a (so-called) bidirectional amplifier to the line fixed this issue, but at the expense of the program guide and VOD features - come to find out it's not really bidirectional with FIOS' technology. I don't use VOD that much (although my wife kind of likes it), but we *really* use the program guide.
Does anyone know of a bidirectional amp that *does* work with FIOS signals? My understanding is that FIOS' reverse signal goes out at >1 GHz, and most bidirectional amps cut off in the low MHz range (5-42 IIRC). I'd also appreciate other thoughts on how to remedy this issue. I'm driving 2 STBs, 2 digital TV's and my internet connection off the FIOS connection.

If your FiOS signal is too weak, that suggests to me that there is an issue with your installation (ex: defective splitter) or the cable connections. Most picture problems on FiOS are due to the signal being too strong, not too weak. FiOS ONTs output at anywhere from +16 to +24dB (or thereabouts), depending on the model. Many TVs, STBs, and DVRs will exhibit dropped frames or intermittent pixelization with signals much higher than +6dB. IIRC, the recommended operating range for Motorola STBs is roughly -6 to +6 dB.
When you consider that the typical splitter attenuates a signal by -3dB to -5dB, it's not clear to me how your installation got from +16 to +24dB at the ONT, to sufficiently below -6dB so as to cause problems for the Motorola box.
I have one of the original Motorola 610 ONTs. My Motorola DVR exhibited occasional pixelization and frequent stutter (dropped frames) on some channels until my FiOS signal was attenuated (reduced) by 7dB, through an added splitter and -3dB attenuator. I've since replaced the -3dB attenuator with a -10dB attenuator (for a total -16dB to -18dB after splitters), as necessary to eliminate pixelization on my TivoHD, which is more sensitive than the Motorola box.
Message Edited by KenAF on 01-05-2009 01:51 AM
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

Is Verizon going to acknowlege the problems with FIOS and Windows Vista

For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop. I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now. It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
This is what daily scenario is:
When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get internet access. After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks. The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also, I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches.

FIOS is short for fiber optics. fiber optics is different technology than DSL.
With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software. AND they offer you a fix.
cjacobs001

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

Will I be able to use my Netgear N 3300router and 111accesspoints wireless units with fios service?

I am having my Fios bundle (tv,internet, phone) installed next week. In reading some posts here I am concerned. Currently I am using Comcast internet router plugged into my main wireless N Netgear model 3300 router that is plugged into my PC. I then have a model 111 Netgear wireless N gaming accesspoint plugged into my main router at PC. It is recieveing wireless N signals from 2 other model 111 gaming Netgear units in my lower home. Plugged into those is my xbox, Ps3, replay tv ect. The signal is much better and I transmit HD video from my PC to tvs with this wireless N stuff.
I have read you must use FiOS supplied amtech router with fios. Its only wireless g and I dont want that. my following is the questions.
1. Can I not use the Amtech and just use my stuff?
or
2. Can I turn of Amtech wireless and plug my Netgear 3300 into the Amtech to use my stuff on wireless N to AMtech and then PC for full pipe.
or
3. Could I just use my wireless N gaming access points and plug the upstairs access point into the amtech and not use my Netgear 3300 router and still get my N by way of my access points?
Netgear uses the same IP range 192.168.1.1
This is very important for my install. Will the installer be any help with this dilema?
thank you so much.
Solved!
Go to Solution.

You will still be able to use your Wireless N Equipment with the Verizon Provided Router. You will also be able to turn off teh wireless G in the Verizon Router.
Here is a FAQ that will explain all of the details:
http://www.dslreports.com/faq/verizonfios/3.0_Networking
It may be best to allow the installer to set up FIOS without your Equipment in the equation and then reconfigure everything after he is done. If you plan on using your Netgear as the Primary Router make sure that you have pre-run a CAT5 cable from where the ONT will be mounted to the Netgear Location and ask him to use it for your Data Connection (Will make switching later much easier).
Message Edited by BrianMcD on 07-07-2009 02:11 PM
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

I am totally lost with this instalation with Adobe Photoshop, can anyone HELP ME ????

I am Totally Lost with the installing of my Adobe Photoshop CS6 ---- I have downloaded the 3 files ( directions & 2 installation setup programs) NOW WHAT?????

Cailinb1420473 do you receive any specific error messages when trying to install Creative Suite 6? For information on how to install Creative Suite 6 please see Install Adobe Creative Suite 6. If you have any questions regarding the document you are welcome to update this discussion.

Robocall Blocking is incompatible with FIOS Freedom Essentials

I receive a half-dozen robocalls each day, so I decided to sign up for NOMOROBO's robocall blocking service. However, I was unable to complete my registration because the Simultaneous Ring feature apparently is unavailable with FIOS Freedom Essentials. It is available with FIOS Digital Voice, but FIOS Digital Voice is not available in my neighborhood.
It is very frustrating to know that there is technology out there which would allow me to block robocalls, but Verizon cannot provide me with the feature which is needed to utilize that technology.
Is there any reason why Verizon cannot add the Simultaneous Ring to FIOS Freedom Essentials?

Tns,
You are asking great questions that only Verizon can answer; and until now they choose not to. My bills are so high because each separate dedicated "copper" line needs to have it's own separate phone plan. I confirmed this again through multiple calls last night. Over and over again, I am told that if I have "copper" lines then it is not running through my FIOS box and if there is a power outage it will have no effect on the line, which I have now learned is not true.
What amazes me even more is that last night I even spoke to the "technical" team at Verizon and they can only use words like "that's weird" and that "it shouldn't be that way" etc. If you listen to the recordings it's quite upsetting.
Last week I was sold a "copper" phone line at more than double the price of digital phone service...Apparently there is no technical difference in what product I received. This doesn't seem like the kind of product the phone company should be peddling given that it is the same thing at over twice the price. It is misleading and in many ways is a bait and switch tactic.
The reality is that if you think you have a "copper" phone line with FIOS what you probably have is a "copper phone plan" which is insulting to learn. I am finding on the internet now of other people who are having this issue and it is a serious violation of many sections of the Consumer Fraud Act and other statutes.
I have been fiercely loyal to Verizon (In addition to my home, we use it at my place of business) and it bothers me that they feel it is OK to mislead people in this fashion.

I have been offered cc 2014 for 29.99 and its says contact the support team to see if I qualify - trying to get to the support team option by telephone just seems to send me in a loop - getting pretty disgusted with all the rigmarole just to get a somethi

I have been offered cc 2014 for 29.99 and its says contact the support team to see if I qualify - trying to get to the support team option by telephone just seems to send me in a loop - getting pretty disgusted with all the rigmarole just to get a something

This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Does apple tv work with fios

does apple tv work with fios?

Doubtful.
What allows for streaming content from an iPad to a television thru an Apple TV is Apple software included with iOS on the iPad and the Apple TV software. Unless there is a 3rd party android app that provides for this, no.

What to do if screen is totally black with curser showing?

This morning after having Mac Pro in sleep mode I went to use computer and screen is totally blank with curser showing. I turned computer off and the screen appeared white with the apple logo but once it was on screen went black again. Can someone give me some direction on what is wrong.?

Do you have TimeMachine or Clone backup?
If so,try Reinstall OS X first.
Reinstall OS X
http://support.apple.com/kb/PH13871
If that does not help, erase and install OS X.
Erase and install OS X.
http://support.apple.com/kb/PH14243

Total freeze with large files

Hi everybody,
I have a problem that is getting me quite crazy. I have a fairly big (~88mb, JPEG), panorama to edit.
Fact is that Aperture is able to use all sort of adjustments, including brushes, for a limited amount of time (say, 4 minutes), then... just freezes up. It's not completely gone, it just works a lot. I don't know what it does but it consumes almost all CPU it finds. If I am really patient, I can open the menu and quit the app. Then when I fire it up again, it works like charm. Then again, after some minutes it's the same again.
The problem is mainly with brushes, as I'm working with them now. Some strokes and then... boom. It's not a problem of limited processing power. Computer's fine.
I don't know; if I have to say, it's like the processing of the miniature jpgs or something like that sends CPU usage into hyperspace. I haven't found yet a way to disable potential troublemaker features.
Did I mention that if I forcequit the app I lose all the work on the last brush I've used, rendering useless entire hours of time spent being really patient?
I've read that other users have had the same problem, nobody got an answer.
Thank everyone for the help, this has been going on for the last week and it's REALLY annoying.

You're not getting the point. The problem is not the usage, it's the fact that the application becomes totally unstable with no apparent reason (it works perfectly for a limited amount of time, no matter how fast I go) and gets almost stuck unless patiently closed. There's no time I can wait for it to finish working, I spent even half an hour watching my mac being completely unusable to see if at some point it gets back to normal.
This is not an acceptable behaviour, in no possible way. There's got to be some problem, and that problem is not my current hardware configuration (otherwise, I would not have responsiveness from second one).
Does anybody have a minimal clue of what could be?
Thanks
M

If you have no electricity for more than 8 hrs you have no phone with Fios

No one told me that when I gave up my copper line for FIOs that when the electricity goes off for more than eight hours I would have no phone service. Usually, if the electricity went off I would just plug in one of the old phones with a cord and still have access to telephone service. Not so with FIOs. Cell phone service in this area isn't reliable either, especially if there are too many people trying to call out at the same time. It is not a good product for someone who may need EMS service in a secluded area. If I had known this, I would have kept my DSL, FIOs is not any faster when others are on line using it.

Maybe you were not around for the installation of your FIOS when the installer put the battery backup in your garage. Note there is an emergency button on the battery backup that you can push to get an additional 5 hours of phone calls. In my case the welcome kit that I was given also provided directions on how to enable the extra 5 hours of phone support.
Also I've DSL speeds are typically in the 1-7 Mbit speed while my with a 384/768 upload. My Fios gives me consistent 20 megs down and 5 up which is way faster then DSL.
Good luck!

Total Frustration With Adobe Support!

Just a rant about current practices at Adobe......
Adobe's new flagship Photoshop CS4 Extended is hyped as the "Cat's Meow" of photo editing and graphics software. It has some of the most advanced features available including 3D, hardware rendering, advanced stacking, HDR, etc., etc., etc. It actually may be the most fantastic editing software anywhere! But, you can't prove it by me.... Not yet, and maybe not ever....
I can't install it! I have attempted to put it on two of my systems. One a Dell, the other a Gateway. Each has Win XP Home edition. After over six hours of install, uninstall, upgrade video drivers, download 814 megabyte files "twice," install Windows Service Pack 3, etc., etc., I finally called Adobe Support only to be totally disappointed with the non-support.
First, I am subjected to a lengthy wait listening to loud, bad, music loops. Next I'm connected to a "support" person, apparently in India or Pakistan with an accent making it very difficult to understand his "English." He wasn't at all interested in learning about "where" the installation had failed, but just wanted to shovel me off to download a "Windows Cleaner" and "CS4 Cleanup Script." He informed me that I may have to uninstall "ALL ADOBE PRODUCTS" before installing the CS4 Extended Trial.
Now the above statement is just plain stupid, especially from an Adobe representative! Try Adobe Flash, Photoshop versions 5, 7 and CS each complete with dozens of plug-ins, hundreds of actions, specialized settings, etc. How about Adobe Frame Maker with hundreds of projects, Adobe Quick Time, Adobe Encore, Adobe Premier, etc., etc., all with myriad data, plugins, etc. We're talking weeks of reinstall or a complete reinstall of the disk which would, of course, wipe out CS4 EXtended (if it were ever installed - LOL).
So after once again uninstalling the remnants of CS4, installing and running the Win cleanup and CS4 cleanup and reinstall of CS4 Extended - guess what? Yep, failed at exactly the same point - the installation of "Adobe Media Player."
I've wasted two days on simply trying to evaluate CS4 Extended. I've installed a service pack I didn't want or need. I've completely lost Flash thanks to the CS4 Cleanup script and still have no CS4 trial installation. I'm writing this while again listening to bad, loud music loops (for the past 45 minutes).
Listen up Adobe - I've spend many, many thousands of dollars with your company and deserve better treatment. Will I purchase CS4 Extended? It's not likely and becoming less likely with every bar of bad, loud, music loop. Do you actually want to sell your products? Then get some knowledgeable technical support people who can help sort out issues like this and make them available. Don't have some 1st level "support" dweeb who speaks the native language of the country where the support is to be given with an accent so strong that it's impossible for a native speaker to understand. Don't have someone who insults the intelligence of the potential customer with silly statements. In addition to the statement about possibly removing "all Adobe" software before the install, he make the mistake of telling me that this was only "Trial Software" an therefore not necessarily a "stable" and trouble free version. I had to remind him that Adobe states that you simply pay for then receive the unlock code and this "unstable" trial version becomes the "real" and "very expensive" CS4 release version! Give me a break already!!
End rant..... Beware. If you order CS4 maybe you should download the trial version first and be certain it will install and run on your system. I hope you have better luck than I've had.
Best regars,
Lin Evans
303-776-8897
[email protected]

Hi Marian,
Assuming Adobe actually "reads" the forum, I believe that my statement
was appropriate since there are few, if any, other viable ways of
actually getting the message to them. "Support" is terrible unless one
can get to second tier and that's only available usually "after" you
have spent your money and discovered the issues. It certainly has not
"always" been like this. In the old days one actually could speak with a
"technical" support person and didn't have to jump through the hoops
with inexperienced first tier people who know just enough to be
dangerous! Of course it's more difficult in trying economic times and
taking support off-shore is common to a huge number of U.S. companies
with varying degrees of success. I'm certain that many simple question
could be answered in such a fashion, but not all and though forums like
this are very helpful, users also frequently do not have all the
information necessary to help resolve technical issues.
It is indeed the "trial version" which I downloaded (twice) and with
which I'm having the problems. The solution offered on this forum did
indeed get CS4 Extended on my system. Unfortunately, without the Adobe
Media Player which may, or may not be of significant importance which is
yet to be determined.
Yes, I'm a user of "many" Adobe Products since there has been an Adobe
company, and a user of Photoshop since the first release. My sole
purpose for CS4 Extended is for the 3D output. Otherwise CS works just
fine. I'm not really influenced by marketing, only interested in the 3D
output to video. I write tutorials and templates, for a presentation
slideshow software with which I prepare image "objects" by using chroma
key software to create individual frames from video and animate as still
objects. Having a way to easily output cubes, cones, or other 3D
objects, etc., with chroma key green or blue backdrops is important to
me. CS4 Extended has this feature which I need, and I don't know of
other software presently available and which will fit into my workflow.
Photoshop CS works fine for the majority of my photo and graphic
manipulation, but it doesn't have this new and useful feature which I need.
I'm not upset with Adobe marketing - they actually pretty much advertise
truthfully in this case. Nothing which I've heard or seen from Marketing
at Adobe has really stretched the truth beyond credibility. I am upset
with Adobe's support service. It's gotten progressively worse over the
years and the arrogance has multiplied. There's an old saying which
somehow rings true here: you get what you pay for. One good technical
support person is worth half a dozen of what I'm seeing off-shore. They
are underpaid, inexperienced and generally (in my experience) short and
arrogant with potential customers. This isn't good for business. CS4
Extended is a comparatively expensive investment and Adobe should go
out of their way to help facilitate the installation and use of their
trial versions. After all, that's what will eventually convince the
majority of people to buy or not.
Best regards,
Lin

I am totally disappointed with iTunes Match.

I have been informed that I am totally disappointed with the operation of iTunesMatch. I use almost all Apple products and never had as many problems as I havewith iTunes Match.
On my iPhone EVERY time I'll use the iPod.app almost no album covers, andALWAYS have to load them again. Even spending data to get the covers, arescattered in several songs from the album without cover.
Another problem I'm having is that whenever you post a song to play the iPhoneiPod.app need to access the internet again I do not know what! So if the Internet is slow iPhone Do not start playing, it takes several seconds to start playing a song that's on the iPhone. Before the iPod did not have to play the songs using the cloud, right now the music being on the iPhone it needs to access the internet forfree to start playing. This is absurd!
Another thing that is happening because of this crap Match iTunes is that I can no longer hear the shuffle all songs that are on my iPhone! If I send random playmode, the iPod.app picks the songs that are in the cloud and starts playing, but immediately stop playing because you have to do is download the music. It wasimpossible to use the iPod.app to hear music. Or is everything on the iPhone and listen to those problems mentioned above or you do not hear and is waiting to download music that I do not want to hear, because the random songs that are putin iCloud from the list.
I am totally disappointed with the service of garbage that Apple released.

ITines Match is a pile of useless rubbish. It crashes constantly, fails to complete tasks, goes back to square one, freezes computers and utterly fails to work. Piece of sh1t Apple!

Totally disgusted with FIOS

Similar Messages

Maybe you are looking for