Totally new to this. Audio problems with device and output volume.

Hi, I just purchased Logic Express and Im having trouble with the levels. Im going through an Alesis USB mixer. The problem is, right when I press the record button on a track I start getting a very high hiss and an over distorted sound with my guitar. I played around with the levels a bit and it seems that when I go to the computers audio setting and lower the output volume it goes away. I dont understand why output would effect what Im recording. I don't want to have to lower the outpt volume because then I wont be able to hear the track i just recorded when Im recording on another. If anyone knows what is actually going on and how to solve this problem, any advice would be highly appreciated. Thanks.

Hi, missiontorock.
Could this be a "through-feedback" kind of problem? I don't get any kind of distortion or hiss running through my Edirol M100-FX USB mixer.
Depending on how the Alesis is configured, you might be feeding the same signal from the mixer to the computer, getting that signal back from the computer, and then sending it on to the computer again. This is particularly likely since you report that the problem goes away when you lower the output volume from the computer.
You might look for a 'mixdown' switch on your mixer.
Cheers,
Michael

Similar Messages

Xfi Xtreme Audio Problems with Microphone and other things NEED HELP!!!!

? Alright i have exhausted my search for an answer for my problems.... This is a last resort now!
Im running Windows 7
st Problem: I was having problems with my microphone where people heard themselves through my microphone. Ok well i have a creative Fatility series headset with a supposed noise canceling mic. So last night i was like screw it imma put in the install disk for my sound card Xfi Xtreme Audio.
This Arose my 2nd Problem: Now that the drivers were installed and i finaly got a volume panel it says im running Windows Vista. The name next to my card says Sound Blast X-Fi Xtreme Audio (Vista). Alright so i am running windows 7.... What the heck! Next thing is my microphone doesnt even work! This is just awsome btw and im pretty sure the volume panel isnt even the way it was when i was on an XP system.
So if anyone has a fix to this problem let me know it would be great!

A quick update i was able to fix Problem 2, i had to get rid of what i installed so im just back to Problem . I dont have the VOlume Panel anymore but my microphone still seems to make it so that people can hear themselves....

Audio Problems with Quicktime and Flash

Hi,
For some reason, my Mac has stopped playing audio from flash and movies. I have no idea how this has happened as I cannot remember changing any preferences. This has occured with movies that I've watched before that I know the audio works on.
Does anyone know what I can check?
Thanks,
Steve.

It is a known problem and Apple even has a KB article about it.
It seems that some apps might change the sound prefs and in doing so, they keep some other apps from playing back sound. Opening a GB loop will change the settings back to the default, but you can also do it manually following the directions in the KB article.
Why they just don't change it so that those apps do not change the sounds prefs without notifying you of the possible effects, I have no idea.

Problem with inheritance and outputting values in toString.

Hey guys, i'm having a major problem with inheritances.
What i'm trying to do with my program is to create objects in my demo class. Values are passed to several other objects that each do their own calculations of grades and results and then outputs the result in my toString. I followed step by step the instructions in my book on how to setup the inheritance and such. I can only output everything that was created in my superclass, any other thing that was created in an object that belongs to a subclass does not display in the output at all.
Even if I change or create new instance variables, I can't figure out for the life of myself how to output the other values.
Because there's so much code to be splitting on the forums, I zipped my whole project in a RAR. I'll link it here
http://www.4shared.com/file/ZleBitzP/Assign7.html
The file to run the program is CourseGradesDemo class, everything else is either a subclass or superclass to some part of the program. After you run CourseGradesDemo, you will see the output, and understand what displays and what stays at 0.0 value. If anyone can help me out with this it would be greatly appreciated
Thanks in advance.

Basshunter36 wrote:
Hey guys, i'm having a major problem with inheritances.
What i'm trying to do with my program is to create objects in my demo class. Values are passed to several other objects that each do their own calculations of grades and results and then outputs the result in my toString. I followed step by step the instructions in my book on how to setup the inheritance and such. I can only output everything that was created in my superclass, any other thing that was created in an object that belongs to a subclass does not display in the output at all.
Even if I change or create new instance variables, I can't figure out for the life of myself how to output the other values.No idea what you're talking about. Provide an [url http://sscce.org]SSCCE.
Because there's so much code to be splitting on the forums, I zipped my whole project in a RAR. I'll link it here
http://www.4shared.com/file/ZleBitzP/Assign7.html
Not gonna happen. Provide an [url http://sscce.org]SSCCE. And don't say you can't. You definitely can. You may have to spend an hour building a new program from scratch and getting it to reproduce the problem, but if you can't or won't do that, you'll find few people here willing to bother with it.

Audio problems with Firefox and IE

k I am running windows xp sp3 pro.
A fww days ago Audio just stopped working in flash files. just upped and started working for me. it worked then stopped. sooo I uninstalled, reinstalled. turned my speakers to the poitn of that if sound came out Id be able to hear it. made sure that flash volumn button was also turned to max. My windows plays sound JUST fine cause winamp works with no issues whatsoever.
I dont have google voice/chat installed OTHER then whats included in trillian astra build 103 but i had audio working after i installed it.
i have adblock plus in fireox and imacros installed and for IE i have zero plugin running on it at all. i honestly dont even use it. i did an install for flash for ie the first time today to see if it work there and I got nothing still. video works fine btu not gettign ny audio whatsoever.
I was wondering if there is another thing I could try to get it working. thanks
and yes I know this is a really common problem but i couldn't find any actual fixes on google thanks!

so anything? Is there any more information that is needed or anything I could try?

Sound problem with java and windows (volume)

Hello,
Just wondering if there is any way that java can manipulate the sound volume
in windows...I've searched through the forums here and ive noticed that this question has come up a number of times, but nothing definitive has really been posted.
My program is a 'server' side portion of a mobile phone app ive written, that im trying to use as a remote to turn up the volume, skip tracks, etc. on my pc via bluetooth. Basically what im doing is sending a string from the mobile phone app to the pc telling it to increment the volume/decrement the volume by a certain amount. Can java do this natively or am i going to need to use a C++ library through JNI (which i have never done before)
Any help appreciated!
Thanks,
Craig

Victor,
I've tried your suggestions and found that the first one only alters the volume of the midi file that is being played through java. I want to be able to alter the volume of the sound that I already have coming out of my speakers, through windows master volume control.
Your second suggestion I also tried but to no luck...i always get the following exception message:
"Failed trying to find LINE_IN VOLUME control: exception = java.lang.IllegalArgumentException: Line unsupported: LINE_IN source port"This exception occurs no matter what I change LINE_IN to in this segment of code (I want to control sound output so i assume it should be either SPEAKER or LINE_OUT):
lineOut = (Port)mixer.getLine(Port.Info.LINE_IN);Any other suggestions?
I noticed on the j2se sound guide site, they mention a way to get a list of supported mixers and/or lines, but im not exactly sure how to go about doing that (maybe it will be helpful?)
Thanks for your time,
Craig

I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

Check System Preferences > Sound > Output
Make sure the correct device is selected.

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update problem with thyis new phone, someone HELP!!

Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update problem with thyis new phone, someone HELP!!

Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

Audio Problems with some HD channels (HBO mostly)

I'm experiencing sporadic audio problems with a handful of HD channels. Most noticably on HBO.
When the audio is output through the television itself, it sounds OK... however if the audio is output through my home theater receiver and speakers, I can hear a lot of static and "crackling" on certain movies and shows.
The issue isn't the home theater setup, as I have several other components that use it (AppleTV, Bluray, Xbox, etc.) and the audio sounds perfect from them.
The only device that displays that poor audio is the FiOS Set Top Box and even then it's only on a few channels.
I thought maybe that the optical audio cable between the set top box and the receiver may have been bad, so I replaced that. Same problem even with the new cable.
The problem is either with the Set Top Box itself or the audio levels on the stream from the channel provider.
Has anyone experienced anything similar to this, and if so... did you resolve it somehow?
Any help you could provide would be most appreciated.
Thanks!

Check the following.
Help & Settings > Settings > Entitlement Information
Here are possible entitlements mapped to channels.
101 - 104 : PSB HD
407 - 433 : Essential Extra / Unlimited Extra
446 - 453 : HD Extra
501 : Sky Sports 1
502 : Sky Sports 2
507 - 509 : BT Sport SD
510 - 512 : BT Sport HD
513 - 514 : Essential Extra / Unlimited Extra
530 - 540 : Sky Movies
555 - 563 : Kids Extra
You need 'HD Extra' for channels 446 - 453. I have the free 'BT Sport HD' but that does not cover entertainment HD channels. You need to subscribe to the HD Extra bolt-on for £3 for them. Have you ordered HD Extra (it only became available from last Sunday)?

I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the worl

I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Firewire audio problems with OS X 10.5.6

Hello,
I’m experiencing audio problems with Firewire 400 on my Macbook running Mac OSX 10.5.6.
I’ve got a 2.4Ghz IntelCore 2 Duo with 4 GB RAM and 59 GB available on the internal HD.
It’s hooked up to a brand new Mackie D.4 mixer with 2 Firewire outputs. The problems occur on both Firewire outputs.
I’ve installed automatically from the software update (which I will never do again) to 10.5.6. I never tried the D.4 with 10.5.5 so I can’t tell if the problems occur there also.
The main problem is that after a couple of minutes of recording the sound starts to break up and get really distorted. After a while the sound comes back again.
The second problem is that Soundtrack Pro or Audacity don’t get any audio input from the D.4, although audio input is clearly visible in System Preferences – Sound.
The only sound program that works with all 14 Firewire channels is Ableton, but also in Ableton the distortion occurs.
An example of the distortion can be checked here:
http://media.kaalslag.com/firewire-distortion-problem-mackieD4+Macbook.mp3
I’ve roamed several forums and sites to solve the problem and I tried these solutions:
I updated again to 10.5.6. with the full combo download from the Apple site. Restarted. Problem still there.
I shut Airport off, because lots of sites mentioned problems with Airport conflicting with audio/firewire. Didn’t work.
I did the work around with shutting the Macbook off, disconnecting the D.4, restarting the Macbook, opening Audio/Midi Setup, connecting the D.4 again, toggling the format frequencies a couple of times. Again, no use.
Right now I’m using my “old” Macbook again to record from vinyl. This one is still running on OSX 10.4.11. No problems so far.
I’ve had the distortion problems occuring before with an USB interface. Hoped that the Mackie Firewire would solve the problem, but it seems now that there’s a serious audio Firewire problem which is still not solved in OSX 10.5.
Any help, tips and/or a work around would be much appreciated. Thanks!

You could try using another computer in Target Disk mode (as an "external HD"), or you can connect the firewire cable and disconnect all other network cables (turning off airport). Then on each computer go to the "Network" system preferences and select "Built-in Firewire" from the list of ports and choose "Manually" from the drop-down menu next to "Configure". Enter the following IP addresses and subnet masks, apply the changes.
_Computer 1_
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
_Computer 2_
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
After those ip addresses are entered and you've clicked "Apply", ensure that for both computers you have file sharing enabled (done in the "Sharing" system preferences), and then check the Finder sidebar to see if the computers can see each other (their names should appear under "Shared" in the sidebar--if not, try restarting).
If the computers dont appear (even after restarting), using the "Connect To" option that's available in the Finder's "Go" menu. In there, to connect to another computer enter it's IP address as follows:
afp://IP_ADDRESS
If you're on the computer with the ip address of 192.168.1.1, you would enter 192.168.1.2 as "IP_ADDRESS". The "afp" is the protocol (just like "http" for web), and stands for "Apple Filing Protocol"...Apple's file sharing protocol.

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Problems with SwingWorker and classes in my new job, ;), can you help me?

Hi all, ;)
First of all, sorry about my poor English.
I have a problem with Swing and Threads, I hope you help me (because I'm in the firsts two weeks in my new job)
I have two classes:
Form1: Its a JPanel class with JProgressBar and JLabel inside.
FormularioApplet: (the main) Its a JPanel class with a form1 inside.
I have to download a file from a server and show the progress of the download in the JProgressBar. To make it I do this:
In Form1 I make a Thread that update the progress bar and gets the fole from the server.
In FormularioApplet (the main) I call to the method getDownloadedFile from Form1 to get the File.
THE PROBLEM:
The execution of FormularioApplet finishes before the Thread of Form1 (with download the file) download the file. Then, when I call in FormularioApplet the variable with the file an Exception: Exception in thread "AWT-EventQueue-1" java.lang.NullPointerException is generated.
First main begins his execution, then call to Form1 (a thread) then continues his execution and when the execution is finished ends the execution os Form1 and his thread.
How can I do for main class call the function and the Thread download his file after main class assign the file of return method?
How can I pass information froma class include an a main class. Form1 can't send to main (because main class made a Form1 f1 = new Form1()) any information from his end of the execution. I think if Form1 can say to main class that he finishes is job, then main class can gets the file.
I put in bold the important lines.
Note: My level of JAVA, you can see, is not elevated.
THANKS A LOT
Form1 class:
package es.cambrabcn.signer.gui;
import java.awt.HeadlessException;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.net.MalformedURLException;
import java.net.URL;
import java.util.StringTokenizer;
import java.util.Vector;
import javax.swing.SwingUtilities;
public class Form1 extends javax.swing.JPanel {
    //Variables relacionadas con la clase original DownloadProgressBar
    private InputStream file;
    private int totalCicles;
    private int totalFiles;
    private int currentProgress;
    private SwingWorker worker;
    private ByteArrayOutputStream byteArray;
    private boolean done;
    /** Creates new form prueba */
    public Form1() {
        initComponents();
        this.byteArray = new ByteArrayOutputStream();
        progressBar.setStringPainted(true);
        //this.totalFiles = totalFiles;
        currentProgress = 0;
    /** This method is called from within the constructor to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    // <editor-fold defaultstate="collapsed" desc=" C�digo Generado ">
    private void initComponents() {
        label1 = new javax.swing.JLabel();
        progressBar = new javax.swing.JProgressBar();
        statusLabel = new javax.swing.JLabel();
        setBackground(new java.awt.Color(255, 255, 255));
        setMaximumSize(new java.awt.Dimension(300, 150));
        setMinimumSize(new java.awt.Dimension(300, 150));
        setPreferredSize(new java.awt.Dimension(300, 150));
        label1.setFont(new java.awt.Font("Arial", 1, 18));
        label1.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
        label1.setText("Barra de progreso");
        statusLabel.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
        statusLabel.setText("Cargando");
        org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(this);
        this.setLayout(layout);
        layout.setHorizontalGroup(
            layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
                .addContainerGap()
                .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
                    .add(org.jdesktop.layout.GroupLayout.LEADING, statusLabel, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE)
                    .add(org.jdesktop.layout.GroupLayout.LEADING, progressBar, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE)
                    .add(org.jdesktop.layout.GroupLayout.LEADING, label1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE))
                .addContainerGap())
        layout.setVerticalGroup(
            layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(layout.createSequentialGroup()
                .addContainerGap()
                .add(label1)
                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
                .add(progressBar, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
                .add(statusLabel)
                .addContainerGap(73, Short.MAX_VALUE))
    }// </editor-fold>
    // Declaraci�n de variables - no modificar
    private javax.swing.JLabel label1;
    private javax.swing.JProgressBar progressBar;
    private javax.swing.JLabel statusLabel;
    // Fin de declaraci�n de variables
    public byte[] getDownloadedFile(String documentToSign){
         //Variables locales
         byte puente[] = null;
         try{
            //Leemos el documento a firmar
            StringTokenizer st = new StringTokenizer(documentToSign, ";");
            Vector<URL> fileURL = new Vector<URL>();
            HttpSender sender = new HttpSender(null);
            //Introducimos la lista de URLs de archivos a bajar en el objeto Vector
            for(; st.hasMoreTokens(); fileURL.add(new URL(st.nextToken())));
            //Para cada URL descargaremos un archivo
            for(int i = 0; i < fileURL.size(); i++) {
                file = sender.getMethod((URL)fileURL.get(i));
                if(file == null) {
                    Thread.sleep(1000L);
                    throw new RuntimeException("Error descarregant el document a signar.");
                System.out.println("Form1 Dentro de getDownloadFile, Antes de startDownload()");
                //Fijamos el valor del n�mero de ciclos que se har�n seg�n el tama�o del fichero
                this.totalCicles = sender.returnCurrentContentLength() / 1024;
                this.progressBar.setMaximum(totalCicles);
                //Modificamos el texto del JLabel seg�n el n�mero de fichero que estemos descargando
                this.statusLabel.setText((new StringBuilder("Descarregant document ")).append(i + 1).append(" de ").append(fileURL.size()).toString());
                statusLabel.setAlignmentX(0.5F);
                *//Iniciamos la descarga del fichero, este m�todo llama internamente a un Thread*
                *this.startDownload();*
                *System.out.println("Form1 Dentro de getDownloadFile, Despu�s de startDownload()");*
                *//if (pane.showProgressDialog() == -1) {*
                *while (!this.isDone()){*
                    *System.out.println("No est� acabada la descarga");*
                    *if (this.isDone()){*
                        *System.out.println("Thread ACABADO --> Enviamos a puente el archivo");*
                        *puente = this.byteArray.toByteArray();*
                        *System.out.println("Form1 getDownloadFile() tama�o puente: " + puente.length);*
                    *else{*
                        *Thread.sleep(5000L);*
*//                        throw new RuntimeException("Proc�s de desc�rrega del document a signar cancel�lat.");*
        catch (HeadlessException e) {
                //javascript("onSignError", new String[] {
                //(new StringBuilder("UI: ")).append(e.getMessage()).toString()});
        e.printStackTrace();
        catch (MalformedURLException e) {
                //javascript("onSignError", new String[] {
                //(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
        e.printStackTrace();
        catch (HttpSenderException e) {
                //javascript("onSignError", new String[] {
                //(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
        e.printStackTrace();
        catch (InterruptedException e) {
                //javascript("onSignError", new String[] {
                //(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
        e.printStackTrace();
        //System.out.println("Form1 getDownloadFile() tama�o puente: " + puente.length);
        return puente;
    public void updateStatus(final int i){
        Runnable doSetProgressBarValue = new Runnable() {
            public void run() {
                progressBar.setValue(i);
        SwingUtilities.invokeLater(doSetProgressBarValue);
    public void startDownload() {
        System.out.println("Form1 Inicio startDownload()");
        System.out.println("Form1 Dentro de startDownload, antes de definir la subclase SwingWorker");
        System.out.println(done);
        worker = new SwingWorker() {
            public Object construct() {
                System.out.println("Form1 Dentro de startDownload, dentro de construct(), Antes de entrar en doWork()");
                return doWork();
            public void finished() {
                System.out.println("Form1 Dentro de startDownload, dentro de finished(), Antes de asignar done = true");
                System.out.println(done);
                done = true;
                System.out.println("Form1 Dentro de startDownload, dentro de finished(), Despu�s de asignar done = true");
                System.out.println(done);
                statusLabel.setText("Completado, tama�o del archivo: " + (byteArray.size() / 1024) + "KB");
        System.out.println("Form1 Dentro de startDownload, antes de worker.start()");
        worker.start();
        System.out.println("Form1 Dentro de startDownload, antes de salir de startDownload");
        System.out.println(done);
        System.out.println("Form1 Dentro de startDownload, despu�s de worker.start()");
     * M�todo doWork()
     * Este m�todo descarga por partes el archivo que es necesario descargar, adem�s de actualizar
     * la barra de carga del proceso de carga de la GUI.
    public Object doWork() {
        System.out.println("Form1 doWork() this.byteArray.size(): " + this.byteArray.size());
        try {
            byte buffer[] = new byte[1024];
            for(int c = 0; (c = this.file.read(buffer)) > 0;) {
                this.currentProgress++;
                updateStatus(this.currentProgress);
                this.byteArray.write(buffer, 0, c);
            this.byteArray.flush();
            this.file.close();
            this.currentProgress = totalCicles;
            updateStatus(this.currentProgress);
        } catch(IOException e) {
            e.printStackTrace();
        System.out.println("Form1 doWork() FINAL this.byteArray.size(): " + this.byteArray.size());
        //done = true;
        System.out.println("AHORA DONE = TRUE");
        return "Done";
    public boolean isDone() {
        return this.done;
FormularioApplet class (main)
package es.cambrabcn.signer.gui;
import java.awt.Color;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.net.URL;
import java.security.Security;
import java.util.StringTokenizer;
import java.util.Vector;
import javax.swing.SwingUtilities;
import netscape.javascript.JSObject;
import org.bouncycastle.jce.provider.BouncyCastleProvider;
import sun.security.provider.Sun;
import be.cardon.cryptoapi.provider.CryptoAPIProvider;
public class FormularioApplet extends java.applet.Applet {
    //Variables globales
    int paso = 0;
    private static final String JS_ONLOAD = "onLoad";
    private static final String JS_ONLOADERROR = "onLoadError";
    private static final int SIGNATURE_PDF = 1;
    private static final int SIGNATURE_XML = 2;
    //private String signButtonValue;
    private int signatureType;
    private String documentToSign;
    private String pdfSignatureField;
    private Vector<String> outputFilename;
    private Color appletBackground = new Color(255, 255, 255);
    private Vector<byte[]> ftbsigned;
     * Initializes the applet FormularioApplet
    public void init(){
        try {
            SwingUtilities.invokeLater(new Runnable() {
            //SwingUtilities.invokeAndWait(new Runnable() {
            //java.awt.EventQueue.invokeAndWait(new Runnable() {
                public void run() {
                    try{
                        readParameters();
                        initComponents();
                    catch(FileNotFoundException e){
                        javascript(JS_ONLOADERROR, new String[] {
                            (new StringBuilder("Init: ")).append(e.getMessage()).toString()});
                        e.printStackTrace();
                    catch(IOException e) {
                        javascript(JS_ONLOADERROR, new String[] {
                            (new StringBuilder("Init: ")).append(e.getMessage()).toString()});
                        e.printStackTrace();
        catch (Exception e) {
            javascript(JS_ONLOADERROR, new String[] {
                (new StringBuilder("Init: ")).append(e.getMessage()).toString()});
            e.printStackTrace();
        javascript(JS_ONLOAD, null);
    /** This method is called from within the init() method to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    // <editor-fold defaultstate="collapsed" desc=" C�digo Generado ">
    private void initComponents() {
        this.setSize(350, 450);
        appletPanel = new javax.swing.JPanel();
        jPanel1 = new javax.swing.JPanel();
        jTextField1 = new javax.swing.JLabel();
        jPanel2 = new javax.swing.JPanel();
        label = new javax.swing.JLabel();
        jPanel3 = new javax.swing.JPanel();
        jButton1 = new javax.swing.JButton();
        jButton2 = new javax.swing.JButton();
        setLayout(new java.awt.BorderLayout());
        appletPanel.setBackground(new java.awt.Color(255, 255, 255));
        appletPanel.setMaximumSize(new java.awt.Dimension(350, 430));
        appletPanel.setMinimumSize(new java.awt.Dimension(350, 430));
        appletPanel.setPreferredSize(new java.awt.Dimension(350, 430));
        jPanel1.setBackground(new java.awt.Color(255, 255, 255));
        jPanel1.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
        jTextField1.setFont(new java.awt.Font("Arial", 1, 18));
        jTextField1.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
        jTextField1.setText("SIGNATURA ELECTRONICA");
        org.jdesktop.layout.GroupLayout jPanel1Layout = new org.jdesktop.layout.GroupLayout(jPanel1);
        jPanel1.setLayout(jPanel1Layout);
        jPanel1Layout.setHorizontalGroup(
            jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(jPanel1Layout.createSequentialGroup()
                .addContainerGap()
                .add(jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 308, Short.MAX_VALUE)
                .addContainerGap())
        jPanel1Layout.setVerticalGroup(
            jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(jPanel1Layout.createSequentialGroup()
                .addContainerGap()
                .add(jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 24, Short.MAX_VALUE)
                .addContainerGap())
        jPanel2.setBackground(new java.awt.Color(255, 255, 255));
        jPanel2.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
        label.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
        label.setIcon(new javax.swing.ImageIcon("C:\\java\\workspaces\\cambrabcn\\firmasElectronicas\\logo.gif"));
        org.jdesktop.layout.GroupLayout jPanel2Layout = new org.jdesktop.layout.GroupLayout(jPanel2);
        jPanel2.setLayout(jPanel2Layout);
        jPanel2Layout.setHorizontalGroup(
            jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(jPanel2Layout.createSequentialGroup()
                .addContainerGap()
                .add(label, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 308, Short.MAX_VALUE)
                .addContainerGap())
        jPanel2Layout.setVerticalGroup(
            jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(jPanel2Layout.createSequentialGroup()
                .addContainerGap()
                .add(label)
                .addContainerGap(229, Short.MAX_VALUE))
        jPanel3.setBackground(new java.awt.Color(255, 255, 255));
        jPanel3.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
        //this.jButton1.setVisible(false);
        //this.jButton2.setVisible(false);
        jButton1.setText("Seg\u00fcent");
        jButton1.setAlignmentX(0.5F);
        //Cargamos el primer formulario en el JPanel2
        loadFirstForm();
        //Modificamos el texto del bot�n y el contador de pasos.
        //this.jButton1.setText("Siguiente");
        //this.jButton1.setVisible(true);
        //this.jButton2.setVisible(true);
        jButton1.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                jButton1ActionPerformed(evt);
        jButton2.setText("Cancel\u00b7lar");
        jButton2.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                jButton2ActionPerformed(evt);
        org.jdesktop.layout.GroupLayout jPanel3Layout = new org.jdesktop.layout.GroupLayout(jPanel3);
        jPanel3.setLayout(jPanel3Layout);
        jPanel3Layout.setHorizontalGroup(
            jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel3Layout.createSequentialGroup()
                .addContainerGap()
                .add(jButton1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 94, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 112, Short.MAX_VALUE)
                .add(jButton2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 102, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addContainerGap())
        jPanel3Layout.setVerticalGroup(
            jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel3Layout.createSequentialGroup()
                .addContainerGap()
                .add(jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
                    .add(jButton2)
                    .add(jButton1))
                .addContainerGap())
        org.jdesktop.layout.GroupLayout appletPanelLayout = new org.jdesktop.layout.GroupLayout(appletPanel);
        appletPanel.setLayout(appletPanelLayout);
        appletPanelLayout.setHorizontalGroup(
            appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(org.jdesktop.layout.GroupLayout.TRAILING, appletPanelLayout.createSequentialGroup()
                .addContainerGap()
                .add(appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
                    .add(org.jdesktop.layout.GroupLayout.LEADING, jPanel2, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
                    .add(org.jdesktop.layout.GroupLayout.LEADING, jPanel1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
                    .add(org.jdesktop.layout.GroupLayout.LEADING, jPanel3, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE))
                .addContainerGap())
        appletPanelLayout.setVerticalGroup(
            appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(org.jdesktop.layout.GroupLayout.TRAILING, appletPanelLayout.createSequentialGroup()
                .addContainerGap()
                .add(jPanel1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
                .add(jPanel2, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
                .add(jPanel3, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addContainerGap())
        add(appletPanel, java.awt.BorderLayout.CENTER);
    }// </editor-fold>
    private void jButton2ActionPerformed(java.awt.event.ActionEvent evt) {
        this.destroy();
    private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
        changeForms(this.paso);
    // Declaraci�n de variables - no modificar
    private javax.swing.JPanel appletPanel;
    private javax.swing.JButton jButton1;
    private javax.swing.JButton jButton2;
    private javax.swing.JPanel jPanel1;
    private javax.swing.JPanel jPanel2;
    private javax.swing.JPanel jPanel3;
    private javax.swing.JLabel jTextField1;
    private javax.swing.JLabel label;
    // Fin de declaraci�n de variables
     * M�todo readParameters
     * M�todo que inicializa los valores de los par�metros internos, recibidos por par�metro.
    private void readParameters() throws FileNotFoundException, IOException {
         ???????????????? deleted for the forum
        addSecurityProviders();
     * M�tode loadFirstForm
     * Aquest m�tode carrega a jPanel2 el formulari que informa sobre la c�rrega dels arxius
    private void loadFirstForm(){
        //Form1 f1 = new Form1(stream, i + 1, fileURL.size(), sender.returnCurrentContentLength(), appletBackground);
        //Form1 f1 = new Form1(fileURL.size(), sender.returnCurrentContentLength());
        Form1 f1 = new Form1();
        //Lo dimensionamos y posicionamos
        f1.setSize(310, 150);
        f1.setLocation(10, 110);
        //A�adimos el formulario al JPanel que lo contendr�
        this.jPanel2.add(f1);
        //Validem i repintem el JPanel
        jPanel2.validate();
        jPanel2.repaint();
        //Descarreguem l'arxiu a signar
        *System.out.println("FormularioApplet Dentro de loadFirstForm(), antes de llamar a getDownloadFile()");*
        *byte obj[] = f1.getDownloadedFile(this.documentToSign);*
        if (obj == null){
            System.out.println("Lo que devuelve f1.getDownloadedFile(this.documentToSign) es NULL");
        else{
            System.out.println("Lo que devuelve f1.getDownloadedFile(this.documentToSign) NO es NULL");
            System.out.println("obj: " + obj.length);
        this.ftbsigned.add(obj);
        System.out.println("FormularioApplet Dentro de loadFirstForm(), despu�s de llamar a getDownloadFile()");
        //Indicamos que el primer paso ya se ha efectuado
        this.paso++;
     * M�tode changeForms
     * Aquest m�tode carrega a jPanel2 un formulari concret segons el valor de la variable global "paso"
    private void changeForms(int paso){
        /*A cada paso se cargar� en el JPanel y formulario diferente
         * Paso previo: Se realiza en la inicializaci�n, carga el formulario, descarga el archivo y muestra la barra de carga.
         * Case 1: Se carga el formulario de selecci�n de tipo de firma.
         * Case 2: Se carga el formulario de datos de la persona que firma.
        this.paso = paso;
        switch(paso){
            case 1:
                //Creamos un objeto de formulario (seleccion de tipo de firma)
                Form2 f2 = new Form2();
                //Lo dimensionamos y posicionamos
                f2.setSize(310, 185);
                f2.setLocation(10, 110);
                //Quitamos el formulario 1 y a�adimos el formulario 2 al JPanel
                this.jPanel2.remove(1);
                this.jPanel2.add(f2);
                //Validem i repintem el JPanel
                jPanel2.validate();
                jPanel2.repaint();
                //Modificamos el contador de pasos.
                this.paso++;
                break;
            case 2:
                //Creamos un objeto de formulario (seleccion de tipo de firma)
                Form3 f3 = new Form3();
                //Lo dimensionamos y posicionamos
                f3.setSize(310, 175);
                f3.setLocation(15, 130);
                //Quitamos el formulario 1 y a�adimos el formulario 3 al JPanel
                this.jPanel2.remove(1);
                this.jPanel2.add(f3);
                //Validem i repintem el JPanel
                jPanel2.validate();
                jPanel2.repaint();
                //Modificamos el texto del bot�n y el contador de pasos.
                this.jButton1.setText("Finalizar");
                this.paso++;
                break;
            default:
                //Finalizar el Applet
                //C�digo que se encargue de guardar el archivo en el disco duro del usuario
                break;
    private void addSecurityProviders() throws FileNotFoundException, IOException {
        Security.addProvider(new CryptoAPIProvider());
        if (signatureType == SIGNATURE_PDF) {
            Security.addProvider(new BouncyCastleProvider());
        else {
            Security.addProvider(new Sun());
    private File createOutputFile(String filename, int index) {
        return new File((String)outputFilename.get(index));
    protected Object javascript(String function, String args[]) throws RuntimeException {
        //Remove
        if (true) return null;
        try {
            Vector<String> list = new Vector<String>();
            if(args != null) {
                for(int i = 0; i < args.length; i++) {
                    list.addElement(args);
if(list.size() > 0) {
Object objs[] = new Object[list.size()];
list.copyInto(objs);
return JSObject.getWindow(this).call(function, objs);
} catch(UnsatisfiedLinkError e) {
e.printStackTrace();
throw new RuntimeException((new StringBuilder()).append(e).append("\nFunci�: ").append(function).toString());
} catch(Throwable e) {
e.printStackTrace();
throw new RuntimeException((new StringBuilder()).append(e).append("\nFunci�: ").append(function).toString());
return JSObject.getWindow(this).call(function, new Object[0]);
Edited by: Kefalegereta on Oct 31, 2007 3:54 AM
Edited by: Kefalegereta on Oct 31, 2007 4:00 AM

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Audio problem with 2gen ipod touch

Recently I've been having issues with my second generation Ipod Touch and I'm hoping that someone will be able to help me. The problem is a bit strange, so please bear with me as I try to explain it.
As I said, I have a second generation 8GB Ipod Touch that hasn't been too problematic until now. Recently it has been having major audio issues. I was listening to it with my headphones one day when the audio cut out. I thought I had paused the track by accident, but according to the screen, the audio was still playing, however the volume bar had vanished as though no headphones were connected at all. I popped the headphones out and then in again; it worked for a few moments before the problem happened again. I had thought it was just a problem with my headphones until it happened again with a different set and then the audio jack for my car stereo. All the cords are fully pushed in, I checked that problem immediately. It will randomly happen where the audio will cut out and the volume bar will vanish, like it would with nothing connected to it.
Another issue that I noticed is with my external speakers. For whatever reason they are no longer working, just like the headphones, the volume bar is gone and will not return no matter if the music is playing/paused or if I attempt to adjust it with the buttons on the side.
I have never had a real issue with this Ipod and I'd love to know if there's an explanation or if I should just attempt to take it into the Apple Store and see what they can make of it.
Thanks in advance, feel free to ask any questions and I apologize if the explanation was rubbish.

I've seen that kind of issue when there's a problem with the dock connector. It's somehow detecting something plugged into the bottom. You should try to make sure there's nothing stuck in or around the dock connector such as lint or some thing else.
Also make sure you backup and restore your ipod to make sure you take care of any software issues that may be causing this to occur.
Lastly if it still happens, you should definitely take it in for service.

Totally new to this. Audio problems with device and output volume.

Similar Messages

Maybe you are looking for