Totally Unlimted not working
Please can anyone new or has re-contracted to this new service help me confirm a few things.
I re-contracted from infinity option 2 which I have had since launch, so the only really difference is that I will not be traffic shaped anymore.
Well unfortunately that is not the case as far as the tests I have done.
I have been on a round trip to India, tech expert and all I have gone through is pure hell as none of them can help and don’t seem to understand the problem.
So here is what I have done so far to see if I am traffic shaped.
Downloaded the same P2P file at 3pm & 5pm, 3pm is over 1MB is speed and 5pm is about 1.2Kbs a massive difference but that was always the case on the old Infinity Option 2.
Glasnost test at 3pm states downloads are not rated but uploads are.
Glasnost test at 5pm states downloads and uploads are rated.
I had confirmation on 5th Feb 2012 that I was active on new product and five days have passed.
BT India state that my line is currently going through the 10 day stabilisation period and the traffic shaping will remove after that.
I see from some people on this forum that they have the restrictions removed already.
Also since re-contracting My BT account indicates I have no products, phone or broadband as in picture below.
For a large organisation the customer service is really terrible.
Quite a few people are having issues with MyBT at the moment, but I expect that eventually all the new packages will show up.
See http://community.bt.com/t5/Bills-Packages/New-account-page-problems/td-p/775258
also
http://community.bt.com/t5/Bills-Packages/quot-Totally-Unlimited-quot-how-to-check-on-correct-produc...
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.
Similar Messages
-
FORMULA=USING/TOTAL IS NOT WORKING IN BPC NW.
Hi,
I am doing Migration project from BPC MS to BPC NW 7.5. In this I am not able test the Allocation formula.
FORMULA=USING/TOTAL.
Here in this Total is not working. The final result same as USING combinational value. The formula is working for USING combination like FORMULA=USING/100,USING*100....,
WHERE=WHAT* USING/TOTAL.Let me know is there any solution for this.Could you please update me on this.
Find the below sample code for the Allocation Logic.
LOGIC:
*RUNALLOCATION
*DIM P_ACCT WHAT=CE0004010; WHERE=CE0004020; USING=CE0004030; TOTAL=CE0004210
*DIM CATEGORY WHAT=PLAN; WHERE=PLAN; USING=PLAN; TOTAL=PLAN
*DIM P_CC WHAT=India; WHERE=India; USING=India; TOTAL=India
*DIM P_DATASRC WHAT=UPLOAD; WHERE=UPLOAD; USING=UPLOAD; TOTAL=UPLOAD
*DIM P_ACTIVITY WHAT=Repair; WHERE=Repair; USING=Repair; TOTAL=Repair
*DIM RPTCURRENCY WHAT=LC; WHERE=LC; USING=V; TOTAL=LC
*DIM TIME WHAT=2009.JAN; WHERE=2009.APR; USING=2009.MAR; TOTAL=2009.MAY
After exccuting this formula and by observing the Formula Log one record write back message displayed.
Thanks and Regards,
VC kRISHNA.Hi,
Please find the below Allocation logic. Here in this case also getting the same out put. The whare combinational value same as using. This Allocation Logic and the previous one is working with out fail in the MS version. Let me know is this may be a product issue. Could you please update me in this.
Logic:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM PROJECT WHAT=BAS(CorpBudg_Project); WHERE=[SCTSQ1]="Y"; USING=<<<; TOTAL=No_PPC
*DIM ENTITY WHAT=PC10102106; WHERE=NO_PCENTER; Using=<<<; TOTAL=NO_PCENTER
*DIM ACCOUNT WHAT=BAS(Corp_Budg_Accnts); WHERE=880014; USING=<<<; TOTAL=<<<
*DIM DATASRC WHAT=INPUT; WHERE=<<<;USING=<<<; TOTAL=<<<
*DIM RPTCURRENCY WHAT=LC; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM CLIENT_GROUP WHAT=1010; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM CATEGORY WHAT=BUDGET; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM INTCO WHAT=Non_InterCo; WHERE=<<<; USING=<<<; TOTAL=Alloc_PC10102106
*DIM TIME WHAT=BAS(2011.TOTAL); WHERE=<<<; USING=2011.BSS; TOTAL=<<<
*ENDALLOCATION
*COMMIT
Thanks and Regards,
Krishna. -
Totale Rosetta not working on iMac
I recently purchased Totale Rosetta for Italian which is not working for me. The initial video window has no video in it. When I select any of the available menu options (Headset Setup, Users Guide, Rosetta Stone Total E Videos, etc.), I get blank white windows with no content. Plus, the acess is incredibly slow. I have no problems with any other applications on my desktop, which is an IMac, OS X Lion Version 10.7.5 with 16GB Memory. Any suggestions?? Thanks in advance!
Well, yes, I know that Quicken is not a Universal binary (that is unfortunate). But by all accounts and articles the application should run under Rosetta, yes? (Even says so in that Macworld article.)
That's the actual problem I'm having -- The installer will not run. Nor will the program itself. I don't have any other PowerPC apps on the machine to try them out and check if others are working but I'd assume they're not. -
Running total forumla not working
Post Author: Skip
CA Forum: Formula
I am probably missing something pretty simple but can someone tell me why this is not working?
Whileprintingrecords;
numbervar carryover;
if (="C") and (=Date(2006/03/31)) then carryover:=carryover+1;Post Author: Skip
CA Forum: Formula
This formula is in the detail section. I have another formula in the footer section to display the total
whilerprintingrecords;numbervar carryover;
The detail forumla runs, but returns a value of 0.
I know for a fact there are two records that meet both criteria. Here is an example of one:
ID Flag Date hours
1234 C 2006/03/31 7.5
I'll explain the why for this... in the report I need to calculate the number of incidents for the last firscal year. For this report the FY ends on March 30 so if there is an incident that is a continuation ("C") from the previous FY, I need to subtract it from the total.... -
Grand total is not working...please help
Hi, here is my code
SORT S_ENDT BY LIFNR.
LOOP AT S_ENDT WHERE BUDAT IN P_BUDAT.
WRITE: 1 S_ENDT-BKTXT,
11 S_ENDT-BUKRS,
16 S_ENDT-LIFNR,
24 S_ENDT-NAME1,
49 S_ENDT-BLART,
53 S_ENDT-BELNR,
64 S_ENDT-AUGBL,
75 S_ENDT-AUGDT,
86 S_ENDT-BUDAT,
97 S_ENDT-WRBTR,
113 S_ENDT-WAERS,
117 S_ENDT-XBLNR,
130 S_ENDT-ZUONR.
AT END OF BKTXT. " Subtotal by Draft #
ULINE.
SUM.
WRITE: 20 'Total of draft', 37 S_ENDT-BKTXT, 97 S_ENDT-WRBTR.
ENDAT.
AT LAST. " Grand total
SUM.
SKIP.
WRITE: 20 'Grand Total', 97 S_ENDT-WRBTR.
ENDAT.
SKIP.
ENDLOOP.
EXIT.
ENDIF.
I am not getting the right total..I am getting it for all LIFNR and not the value in P_LIFNR only (which is what I want).
please help
thanks
BrianHi,
try this coding.
SORT S_ENDT BY LIFNR.
*data : gt(16) type p decimals 2.*
LOOP AT S_ENDT WHERE BUDAT IN P_BUDAT.
*gt = gt + S_ENDT-WRBTR.*
WRITE: 1 S_ENDT-BKTXT,
11 S_ENDT-BUKRS,
16 S_ENDT-LIFNR,
24 S_ENDT-NAME1,
49 S_ENDT-BLART,
53 S_ENDT-BELNR,
64 S_ENDT-AUGBL,
75 S_ENDT-AUGDT,
86 S_ENDT-BUDAT,
97 S_ENDT-WRBTR,
113 S_ENDT-WAERS,
117 S_ENDT-XBLNR,
130 S_ENDT-ZUONR.
AT END OF BKTXT. " Subtotal by Draft #
ULINE.
SUM.
WRITE: 20 'Total of draft', 37 S_ENDT-BKTXT, 97 *gt*.
ENDAT.
AT LAST. " Grand total
SUM.
SKIP.
WRITE: 20 'Grand Total', 97 S_ENDT-WRBTR.
ENDAT.
SKIP.
ENDLOOP.
EXIT.
ENDIF.
U are using where condition in a Loop ,while executing last record may or may not get executed becoz of restiction.Better declare a variable and SUM under such scenarios.
Regards,
Ballack.
Reward Points if helpful. -
Total Up not working in Cost Plan Version
Dear Expert,
I had selected the Bottom-up planning indicator in T-code OPSB for Cost Planning profile, due to which automatic Total Up is activated in CJ40 Transaction for Default version '0' but when same cost plan will be copied into other version '1' from version '0' from Transcation CJ9BS, Total up is not happining automatically,
I have to manually need to do the total up,
pls suggest, is there is any config issue ??I had checked the planning profile T-code OPSB & Bottom-up planning indicator is selected, due to which automatic Total Up is activated in CJ40 Transaction for Default version '0' but when same cost plan will be copied into other version '1' from version '0' from Transcation CJ9BS, Total up is not happining automatically,
I have to manually need to do the total up, -
Match Total Exposure Not Working For Me
I am taking several pictures (sometimes 100s) of the same object in a studio setting. I have all of the camera controls locked down in manual mode so things like ISO, aperture, and shutter speed are uniform across the entire shoot. I am also using flash for external lighting. My problem arises because the flash will produce different levels of light from shot to shot (despite being in manual mode) so the pictures have different lighting levels - some are brighter than others.
Is there any way to batch process these photos to have a uniform level of light? It seems as though the Match Total Exposure feature creates no change at all. Is that because the ISO, aperture etc. is the same in all the pictures? I need a way to correct for the fluctuating light output of the flash.>Is that because the ISO, aperture etc. is the same in all the pictures
Yes. That is exactly what "Match exposures" does. It looks at ISO, aperture, and shutter and corrects to get to the same EV. If all your images were shot at the same settings, they can't be corrected this way. This is not the way to do consistent flash exposure BTW. You should be correcting either flash output or aperture based on distance (or ISO if you don't want to change aperture or flash intensity) as the intensity of light on your subject decreases inverse square law with distance. Most camera systems can do this automatically based on focus distance and some through the lens flash metering but it is possible to do this manually too. If your flash is off camera (e.g. shooting through an umbrella or bouncing on a ceiling or somesuch) you often don't need to do this and you can stay at one exposure since the distance of the flash to your subject generally doesn't change and so amount of light on the subject doesn't vary.
> I need a way to correct for the fluctuating light output of the flash.
Can't be done easily in Lightroom. The only way is manually correcting visually. It is almost impossible to automate something like this although I guess you could generate some scripts in Photoshop that looks for common tones (like flesh tones) and equalize them. Not at all trivial though and very much a highly advanced thing to try. Your best bet is manual exposure compensation. Should be very quick. Just arrow through and correct either in quick develop with a few clicks or in Develop. -
Empire Total War Not Working on 2013 iMacs
Greetings,
I just purchased a high-end 2013 iMac with an NVIDIA GeForce GTX 780M 4096 MB. I downloaded Empire Total War (ETW) from the App Store tonight and after installation, got the message: "This Mac is not supported".
After looking around, I found a Feral posting saying: "The following graphics cards are not supported: ATI X1xxx series, Intel GMA series and NVIDIA 7xxx series."
Can someone smarter than I confirm that the GeForce GTX 780M 4GB graphics card won't in fact play ETW? I can't be the only one is this boat...
If so, is there a workaround? It seems odd that Feral would sell a popular game on the App Store and not allow top-of-the-line iMac's to play it...
Thanks!
Loyal iMac UserHi there, I'm in the same boat. The issue has come in with way OS X Mavericks reports the VRAM of the GTX 780m.
Feral have confirmed that they are testing a patch to fix this, unfortunately no time frame was supplied for when they will release this.
Hang in there, dead annoying but nothing that can be done. -
Grand Total Not working on Materialized view based table ??
Hi all,
I have a complex report report by using sum and decode function. I precalculated my requirment in database and then create a materialized view based on my sql statement. I import this view in physical and BM model and its results very fine and efficient. But the problem create when I implement Grand Total on my report in table view it did'nt work means (Grand Total is not working on this MV based table) Any idea why ??
any reply would by higly appriciated.
RegardsHi Zishan,
Check the Aggregation Rule and set it to sum in the table view.
That is go to the "edit formula" tab of the column for which you want grand total and set that to sum.
Hope this will help.
Thanks
Ashok -
Safari not working with Yosemite- incompatible with google search too
Ever since I upgraded my macbook pro, Safari has been slow. In the past 2 days, it's more than slow - it's impossible. I am able to get to pages I have bookmarked or get to links in email documents - but every time I try to do a search using the search bar in Safari, it hangs. Sometimes I get a list of possible websites (after a few minutes) but if I click on any of those, Safari just hangs there and won't go. I even had to use Chrome in order to generate this question in the discussion groups. Does anyone have any suggestions other than using an alternate browser. Is it possible that google and Safari on Yosemite are incompatible? I did try using the "Develop" menubar option and chose DuckDuckgo as the search tool and it worked a bit better.
This is now the 2nd big issue I've had with Yosemite -- it totally would not work with my Adobe Photoshop Elements program -- I spent hours on the Adobe forums and discovered that 100s of others were also having issues. It turned out to be a problem with Yosemite and the trackpad. Adobe finally came up with a temporary plugin that allows Elements (and other Adobe programs) to run.
Suggesions on Safari other than ditching it and using Chrome?Try a Safari reset.
Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. Then try Safari/History/Show History and delete all history items. Quit/reopen Safari and test. You can also try try Safari/Clear History and Web Site Data. The down side is it clears all cookies.Doing this may cause some sites to no longer recognize your computer as one that has visited the web site. -
my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Dear experts,
I am working on ALV report. I need to maintain Sub total text but its not working with the below code.
Can you please tell me whats wrong with this code.
FORM f_display_alv_output .
DATA: loc_repid TYPE sy-repid.
CLEAR: loc_repid.
loc_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = loc_repid
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* i_callback_top_of_page = 'F_ALV_TOP_OF_PAGE'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
is_layout = fs_layout
it_fieldcat = itab_fieldcat
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
it_sort = itab_sort
* IT_FILTER =
* IS_SEL_HIDE =
i_default = 'X'
i_save = 'A'
* IS_VARIANT =
it_events = itab_events
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = itab_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_DISPLAY_ALV_OUTPUT
*& Form F_POPULATE_SORT
* text
* --> p1 text
* <-- p2 text
FORM f_populate_sort .
CLEAR: fs_sort.
REFRESH: itab_sort.
* Sort by Account Manager
fs_sort-spos = '01' .
fs_sort-fieldname = 'ACT_MANAGER'.
fs_sort-tabname = 'ITAB_OUTPUT'.
fs_sort-up = 'X'.
fs_sort-subtot = 'X'.
APPEND fs_sort TO itab_sort .
CLEAR fs_sort.
* Sort by Sales Office
fs_sort-spos = '02' .
fs_sort-fieldname = 'VKBUR'.
fs_sort-tabname = 'ITAB_OUTPUT'.
fs_sort-up = 'X'.
fs_sort-subtot = 'X'.
APPEND fs_sort TO itab_sort .
CLEAR fs_sort.
* Sort by Customer
fs_sort-spos = '03' .
fs_sort-fieldname = 'KUNNR'.
fs_sort-tabname = 'ITAB_OUTPUT'.
fs_sort-up = 'X'.
fs_sort-subtot = 'X'.
APPEND fs_sort TO itab_sort .
CLEAR fs_sort.
* Sort by Material
fs_sort-spos = '04' .
fs_sort-fieldname = 'MATNR'.
fs_sort-tabname = 'ITAB_OUTPUT'.
fs_sort-up = 'X'.
fs_sort-subtot = 'X'.
APPEND fs_sort TO itab_sort .
CLEAR fs_sort.
ENDFORM. " F_POPULATE_SORT
*& Form F_GET_EVENT
* Handle events for the list
* --> p1 text
* <-- p2 text
FORM f_get_event .
REFRESH: itab_events.
CLEAR: fs_events.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 4
IMPORTING
et_events = itab_events
EXCEPTIONS
list_type_wrong = 0
OTHERS = 0.
CLEAR: fs_events.
READ TABLE itab_events INTO fs_events WITH KEY name = slis_ev_top_of_page.
IF sy-subrc EQ 0.
MOVE 'F_ALV_TOP_OF_PAGE' TO fs_events-form.
MODIFY itab_events FROM fs_events INDEX sy-tabix.
ENDIF.
CLEAR fs_events.
READ TABLE itab_events INTO fs_events WITH KEY name = slis_ev_subtotal_text.
IF sy-subrc = 0.
MOVE wl_formname_subtotal_text TO fs_events-form.
MODIFY itab_events FROM fs_events INDEX sy-tabix.
ENDIF.
ENDFORM. " F_GET_EVENT
*& Form SUBTOTAL_TEXT_form
* text
FORM subtotal_text_form USING p_subtot_text TYPE slis_subtot_text.
IF p_subtot_text-criteria = 'ACT_MANAGER'.
p_subtot_text-display_text_for_subtotal = 'Account Manager Level Subtotal'(020).
ENDIF.
ENDFORM. "SUBTOTAL_TEXT
*& Form f_alv_top_of_page
* text
FORM f_alv_top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = itab_top_of_page.
ENDFORM. "F_ALV_TOP_OF_PAGE
Edited by: Rajesh Tummala on Apr 7, 2009 4:16 PMHere's the code below. Sub total text event is not working but top of page is working fine.
*& Form F_POPULATE_SORT
* text
* --> p1 text
* <-- p2 text
FORM f_populate_sort .
CLEAR: fs_sort.
REFRESH: itab_sort.
* Sort by Account Manager
fs_sort-spos = '01' .
fs_sort-fieldname = 'ACT_MANAGER'.
fs_sort-tabname = 'ITAB_OUTPUT'.
fs_sort-up = 'X'.
fs_sort-subtot = 'X'.
APPEND fs_sort TO itab_sort .
CLEAR fs_sort.
* Sort by Sales Office
fs_sort-spos = '02' .
fs_sort-fieldname = 'VKBUR'.
fs_sort-tabname = 'ITAB_OUTPUT'.
fs_sort-up = 'X'.
fs_sort-subtot = 'X'.
APPEND fs_sort TO itab_sort .
CLEAR fs_sort.
* Sort by Customer
fs_sort-spos = '03' .
fs_sort-fieldname = 'KUNNR'.
fs_sort-tabname = 'ITAB_OUTPUT'.
fs_sort-up = 'X'.
fs_sort-subtot = 'X'.
APPEND fs_sort TO itab_sort .
CLEAR fs_sort.
* Sort by Material
fs_sort-spos = '04' .
fs_sort-fieldname = 'MATNR'.
fs_sort-tabname = 'ITAB_OUTPUT'.
fs_sort-up = 'X'.
fs_sort-subtot = 'X'.
APPEND fs_sort TO itab_sort .
CLEAR fs_sort.
ENDFORM. " F_POPULATE_SORT
*& Form F_GET_EVENT
* Handle events for the list
* --> p1 text
* <-- p2 text
FORM f_get_event .
REFRESH: itab_events.
CLEAR: fs_events.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 4
IMPORTING
et_events = itab_events
EXCEPTIONS
list_type_wrong = 0
OTHERS = 0.
CLEAR: fs_events.
READ TABLE itab_events INTO fs_events WITH KEY name = slis_ev_top_of_page.
IF sy-subrc EQ 0.
MOVE 'F_ALV_TOP_OF_PAGE' TO fs_events-form.
MODIFY itab_events FROM fs_events INDEX sy-tabix.
ENDIF.
CLEAR fs_events.
READ TABLE itab_events INTO fs_events WITH KEY name = slis_ev_subtotal_text.
IF sy-subrc = 0.
MOVE wl_formname_subtotal_text TO fs_events-form.
MODIFY itab_events FROM fs_events INDEX sy-tabix.
ENDIF.
ENDFORM. " F_GET_EVENT
*& Form F_DISPLAY_ALV_OUTPUT
* Display the list output
* --> p1 text
* <-- p2 text
FORM f_display_alv_output .
DATA: loc_repid TYPE sy-repid.
CLEAR: loc_repid.
loc_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = loc_repid
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* i_callback_top_of_page = 'F_ALV_TOP_OF_PAGE'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
is_layout = fs_layout
it_fieldcat = itab_fieldcat
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
it_sort = itab_sort
* IT_FILTER =
* IS_SEL_HIDE =
i_default = 'X'
i_save = 'A'
* IS_VARIANT =
it_events = itab_events
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = itab_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_DISPLAY_ALV_OUTPUT
*& Form SUBTOTAL_TEXT_form
* text
FORM subtotal_text_form USING p_subtot_text TYPE slis_subtot_text.
IF p_subtot_text-criteria = 'ACT_MANAGER'.
p_subtot_text-display_text_for_subtotal = 'Account Manager Level Subtotal'(020).
ENDIF.
ENDFORM. "SUBTOTAL_TEXT
*& Form f_alv_top_of_page
* text
FORM f_alv_top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = itab_top_of_page.
ENDFORM. "F_ALV_TOP_OF_PAGE -
Adobe Edge Animate CC 2014.1 is totally not working. It stop working after 5min. Sometimes is stops the operating system. On on mac OS X Yosemite. macbook pro i7 2013.
I reinstalled it not helping.
Message was edited by: Daniel BoguszewskiUPDATE
i have ulpaded 2 animation ( one normal and one Responsive ) in 2 different server here the link
www.eclipseadv.com/maliRP/maliRP.html
Untitled
via SAFARI or CHROME on MAC all OK
but via IPAD ( SAFARI, CHROME and MERCURY) i didn't see the video, just the animation of the BUTTON and the link if i click on it (not in Mercury), like in the content viewer. -
i tried to install an update of my ios via itunes and my phone was totally cleared. right now im trying to activate it again, its not working. what can i do?
You will need to restore the software via the following procedure:
Turn your device off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your device and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a device in recovery mode. Now you can restore to factory settings. -
I am trying to create a calculation by evaluating a set of records and including only those that meet the criteria in the total. The calculation seems to work correctly on the individual records, but the total does not... it seems to be doubling the result. Here's the calculation:
SUM(CASE WHEN ( Tx Period."Tx Period Year" = '2007' AND Activity Composite fact.Activity Date <= TO_DATE('07-MAR-2007') ) THEN Activity Composite fact.Activity Amount ELSE 0 END)
Any help appreciatedHi,
Are there any Page Items on the report?
Is the report output displayed for all the records? Also, check if "Hide duplicate rows" is checked.
Thanks.
Maybe you are looking for
-
Please help
-
Hi I have one TB of sata hard disk on linux EL4. recently i was having some issues for ipaddress. so I reinstalled Linux EL4 keeping all other u01, u02 devices and formatted /, boot (root and boot). now when i see I dont find u01, or u02 etc what wou
-
Drawing JPEGs/GIFs directly on JFrames
Hey all, Is it possible to draw an image DIRECTLY onto an instance of the JFrame class, rather than writing a subclass of a component? I suspect that a solution to my problem might have something to do with the getGraphics() method of JFrame. Mike.
-
I have a very huge and a lenghty LOV Query . I am using 6i builder and when i save the module and try to reopen it , Only 3/4th of the LOV query is available and the remaining disappears . I can compile this in 6i by copying the query again but it cr
-
Is my NW7.3 the latest version ?
Hi, I have a installed NetWeaver 7.3 (EP+CE, java based, no ABAP). Recently I encountered a wired problem and guess it could be a bug. So I want to look for patch. But I do not know whether my version is the latest. In the System Information page, my