Totals page doesn't come more than one time

I'm creating a tabular report with a summary columns.
When using the report wizard, the totals page comes only one time, if i want to update the summary columns, or recreate again, the totals page doesn't come.
How can i get the totals page again?

Summary columns is related to the Data wizard not to the report wizard,
So, if we use Ref Cursor query to create the Data Model we should create summary columns mannualy.

Similar Messages

Why a page posting the request more than one time?

Hi,
I'm sending some data from a normal html document's input fields to a server side code(serlvet). Normal POST method only.
In this case, some times the servlet is invoked only once. and some times it is invoked twice. Why it is behaving like this?
I'm very much sure that I'm clicking the submit button only once in all cases, but still it posts the data twice some times.
Thanks in advance
Kannan.T

Summary columns is related to the Data wizard not to the report wizard,
So, if we use Ref Cursor query to create the Data Model we should create summary columns mannualy.

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else on top of it.

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else over the top of it. Some pages will run text and pictures together, like a car rear-ending another or a train pile up. Other pages will cut an image or text short, i.e. it will display a portion of the top of the image or text but not the rest. This happens on Amazon for example, the section where it says "Customers who looked at this also looked at" will allow only a certain amount of the upper portion of the description immediately below the picture of the product but below that section everything is fine until I get to another section displaying more products and their descriptions and then it cuts the bottom portions off again. I've noticed this behavior mostly in the sections with product photos, the text sections seem okay. YouTube also displays this behavior. It's even doing it on this page right now. Below this box I can read "The more information you can provide the better chance your question will be answered " , but directly below that in the next sentence I can see the start of it with "Troublshootin" and the "Automatically Add" in a green field covering the "g". The next clear text is "A window will open in the top corner. Click Allow, and then click Install. If the automated way doesn't work, try these manual steps." I tried turning of pre-fetching, clearing history, cookies, and cache, scanning for malware with Avast and Windows Defender all to no avail. It began when I upgraded from dial up to DSL via AT&T Uverse. I have a Motorola NVG510 modem. The modem was replaced an hour ago along with new dedicated lines and DSL/Phone splitter from the box by an AT&T technician to make sure my incoming lines were up to par. He ran a connection test and verified everything is up to standards. IE does not display this behavior. I am running Firefox20.0.1 and all previous versions have acted the same way since I upgraded to DSL about 3 months ago.

If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Creating Pages in PeopleSoft with more than one HTML Form

Hi,
We've a requirement to create a page in PIA with more than one HTML form.
As per PBooks - "The page being developed cannot be built using PeopleSoft Application Designer.
An example of this is a page that requires more than one HTML form.
PeopleSoft Pure Internet Architecture places the entire page inside of a single form tag, so no other HTML form tags can be added.
In this case the requirements of the page can't be met by pages created in PeopleSoft Application Designer, so use IScripts instead."
If someone can share his/her experience, It Would be of great help to me.
-Thanks!!

Take a look at my IScript postings. Let me know if you still have questions after reading these blog posts.

I have Elements 10. It doesn't handle RAW. It also doesn't allow more than one Fine JPG to be downloaded at a time. Can this be fixed with a download, or am I stuck to upgrade to Elements 13?

I have Elements 10. It doesn't handle RAW. It also doesn't allow more than one Fine JPG to be downloaded at a time. Can this be fixed with a download, or am I stuck to upgrade to Elements 13?

philips69374220 a écrit:
I have Elements 10. It doesn't handle RAW.
Yes, it does.
FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
It can handle the raw files covered by the ACR 6.7 version.
For newer cameras, you can use the free Adobe DNGconverter to batch convert a folder into the DNG raw format that PSE10 can read and edit.
(see the link in the upper document)
Fine JPG to be downloaded at a time.
All versions of Elements can open many jpegs at the same time, and the organizer lets you import as many as you want?

How to deploy a Webapplication on WAS more than one times on same server?

Hi all,
I 've a special problem:
In our web-app (some DC's) also stored propertie-Files. Now we would to deploy this application more than one times at same server using different WebContentRoots. (f.e. http://server/app1 and http://server/app2 a.s.o.)
We know, that we must create different EAR-Projects and refer the web-Module and configure the application.
But in the second application there it's recommended to change some properties.
How we can handle this in JDI without copy the web-application?
I hope my question can be understood.
Best Regards
Sven Rickelt
Using Netweaver + WAS 6.40 2004 SP 13

Hi Sven,
as I'm new to NWDI, I cannot give you a 100 percent, field-tested solution. But have you already thought about using the Configuration-Adapter?
If you can change the source of your web-app, you could maintain the data formerly stored in property files using the configuration adapter of visual administrator. The SC <a href="http://help.sap.com/saphelp_nw04/helpdata/en/45/e7e14b517b42788a1c166f9f32455e/content.htm">configuration</a> allows you to access this data.
With this approach you can stick to one web-application and do the configuration work separately for each deployed application.
Best regards,
Frank

Execute more than one times external command of OS Windows NT

Hi all,
        I have to execute more than one times from an ABAP program an exernal command of Operating system windows NT . In order to reach this goal I found the standard program RSBDCOS0 and it works very well if you execute it one time. Unfortunately I have to execute this external command more than one times. Is there any soluiton?
thank to all
                    Gino Bonfiglioli

Well why are you using this report RSBDCOS0 to execute external commands?
Because SAP provides certain function modules that can be used to call operating system commands; so you can use these functions to do your task.
Just check the following link
http://help.sap.com/saphelp_nw2004s/helpdata/en/fa/0971e1543b11d1898e0000e8322d00/frameset.htm
As you mentioned that you need to execute multiple times, you can easily put the call to function module inside a loop or do/enddo structure. for example consider the following
do 3 times.
call function 'SXPG_COMMAND_EXECUTE'
      exporting
           commandname                   = 'Put operating system command here'
           additional_parameters         = full_filename
           targetsystem                  = targtsys
           stdout                        = 'X'
           stderr                        = 'X'
           terminationwait               = 'X'
      importing
           status                        = sxpg_status
           exitcode                      = sxpg_exitcode
      tables
           exec_protocol                 = sxpg_results
      exceptions
           no_permission                 = 1
           command_not_found             = 2
           parameters_too_long           = 3
           security_risk                 = 4
           wrong_check_call_interface    = 5
           program_start_error           = 6
           program_termination_error     = 7
           x_error                       = 8
           parameter_expected            = 9
           too_many_parameters           = 10
           illegal_command               = 11
           wrong_asynchronous_parameters = 12
           cant_enq_tbtco_entry          = 13
           jobcount_generation_error     = 14
           others                        = 15.
write the results
loop at sxpg_results.
write:/ sxpg_results-length,
         sxpg_results-message.
endloop.
refresh sxpg_results.
enddo.

How to post GR from po more than one time?

i want to post goods receipt from PO more than one time even the quantity of PO have been totally receipted.

Hi Dear,
whats the problem in that if you have recieved 100 quantity all together, and want to post in break-ups then you can surely do that by changing the quantity in the GR, the system will each time suggest the remaining full quantity, you just need to change it.
Hope it helps.
Regards,
Yawar Khan

How to share more than one Time Machine folder

Hi,
With Snow Leo Server I found how to find how to share more than one Time Machine Folder but I can't see how to do the same with Lion Server, could you help me with that ?
The goal of that is to offer one TM folder per user which is located on a dedicated partition in order to limit the size of TM backups per user (150Gig).
In Lion, in can only share one TM folder for everybody and I didn'tfind if I can set a limit size per user...
Thank you in advance,

I have figured out a way to enable multiple backup targets.
However, it's one of these things I wouldn't want to describe to anyone except true programmer types, because everyone else has a 90%+ chance of messing up their system if they do something wrong.
It involves turning off file sharing, and then editing the plist files in /private/var/db/dslocal/nodes/Default/sharepoints/
The gist of it is this:
a) first create all the share points you later want to use for TimeMachine, and set them up for afp-only file sharing, also create one TM target, which you can either use later, or have there so the system has one entry it knows how to handle. I just made a bogus one that I'm not actively using.
b) turn off file sharing in Server.app
c) turn off TimeMachine in Server.app
d) now you can edit the files, the easiest is with Xcode, so you may want to install that first
e) for each sharpoint you made in a) there will be a corresponding .plist file in the location indicated, these are the files that need to be edited.
f) for each of these files
     1) the item0 string property in the timeMachineBackup array must be switched from 0 to 1
     2) a new key of type array with the name timeMachineBackupUUID must be created
     3) in the newly created array an item of type string must be placed with the value of a UUID, which can be created with the shell command uuidgen
g) make sure all the edited plist files are saved
h) turn on TimeMachine in the Server.app again
If all went well, you now should be able to go to one of your networked client computers and see all the time machine share points just created as options for being a time machine target.
Anyway, if you go that route: be careful, don't blame me if you muck things up...

Can we prevent entering the same condition more than one time?

Hi friends,
Can we prevent the user for entering the same condition type more than one time in same sales order?
Rama rao

/write codes in Include ZXVVAU05/
/prgm avbl in one of the msg in forum/
DATA: BEGIN OF tXKOMV OCCURS 50.
INCLUDE STRUCTURE KOMV.
DATA: END OF tXKOMV.
data : tab_name(40) type c ,
ld_len type i , ld_len1 type i .
field-symbols : <tab> type any.
tab_name = '(SAPMV45A)XKOMV[]'.
assign (tab_name) to <tab>.
txkomv[] = <tab>.
describe table txkomv lines ld_len .
sort txkomv by kposn KSCHL .
delete adjacent duplicates from txkomv comparing kposn KSCHL .
describe table txkomv lines ld_len1 .
if ld_len1 ne ld_len .
refresh txkomv .
message e002(zmm) with ' Please remove duplicate condition in item price' .
endif .

Will syncing my iphone 3GS more than one time daily wear out the battery?

Will syncing my iPhone 3GS more than one time daily with Outlook 2007 wear out the battery? An Apple Care advisor said I should only sync it one time per week, but I need to do it daily as I use the calendars and notes for work.

CindiS wrote:
Will syncing my iPhone 3GS more than one time daily with Outlook 2007 wear out the battery?
No.
An Apple Care advisor said I should only sync it one time per week
Whoever you talked to has no idea what they are talking about. Ignore their advise.

Block create type of operation more than one time

Hello SAP CRM Experts!
I have a question.
How do I get block the user create a type of operation more than one time?
For example, I have a kind of opportunity that can be created only once for each client. How can I do this using the customizing?
Best Regards!
Tks!

Hi,
you could only limit the assigned internal number range to one object, which would allow only one document to be saved. The next creation would then fail since there is no number available.
This is the only solution I can think of, otherwise you need to program a BADI.
Regards, Kai

Delete a template in pages also how to delete a page if you have more than one

Hi how do you delete a template from pages,also if you have more than one page and you only want one how do you delete the other page.

You have to navigate to the My Templates folder in the Application Support folder in your System Library which is hidden by default in OSX 10.7.5. Hold down the option key when you click on the Go menu in Finder and all will be revealed.
A page only exists because it has content on it, even if that is an invisible like a space, tab, return or page break. Click on the page you want to clear and delete the content.
Menu > View > Show Layout/Invisibles
to see what is there.
Peter

How can i find out the more than one times occurance of integer in a array?

How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Please some one help me as sson as possible. thanks in advance....

Kumar_Mohan wrote:
How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Sort the array. Then loop through it and compare each i-th element with the (i+1)-th element.
Please some one help me as sson as possible. thanks in advance....In future postings, please refrain from telling that it is urgent, or you need help ASAP. It is rather rude to do so.

More than one time machine backup..

Is it possible to make time machine backup to more than one location? I have a nice big 2TB drive at my office that I use for time machine and it works perfectly but I would also like to run a second time machine backup to a portable 1TB drive that I own so that I have a backup that I can carry around with me as well as the fixed backup I leave at my office.
When I last tried to backup to the portable drive it forgot all about the original backup so when I came to try and back that up again it wanted to run from scratch and ignored all of the files on the external drive.

Chanandl3r wrote:
I then ejected the big 2TB drive and re-connected the smaller 1TB portable drive. I opened TM and clicked on Backup Now
Did you change the destination via TM Preferences > Select Disk? If not, that may be the problem.
Can't I just plug in different disks when I want and the system recognise them and run the appropriate backup for me?
No; you must tell TM when you swap destinations.
Did the new backup complete? Are you sure TM was writing to the 1 TB drive? There are some circumstances where OSX will "forget" that an external drive has been disconnected, and create a folder in the /Volumes folder on your internal HD; then Time Machine (or other app) will write there, instead of to the external HD. See the blue box in Where did my Disk Space go? to check.

Totals page doesn't come more than one time

Similar Messages

Maybe you are looking for