Totals
I did a calculation in discoverer desktop COUNT_DISTINCT(X)
It works fine but when I'm trying to du a total Grand sum of the column it does not show. If i try to do a count it shows.
What can I do to make the Sum show at the bottom of the column?
I'm using discoverer 4.1.48.06.00
//Åsa
Hi
To further add to what Russ has said, if you are joining to more than one folder please check the direction of the joins. If these are correct or you still have issues it sounds like you could be in a fan trap situation.
Discoverer will not compute aggregations if it thinks there is the possibility of a many-to-many join. Even if you insert code to work around this, Discoverer just looks at the join definitions in the EUL and says - uh oh - this could be a fan trap.
To prove it, try changing the type of join to being 1:1 and see what happens. If it now works then you are in the fan trap domain. You need to be very careful about continuing with that query and please don't export the data to Excel. One of the biggest mistakes folks make is exporting fan trap data to Excel and then getting Excel to compute the totals. The totals will be wrong - I guarantee it. This is one of the reasons why, if at all possible, you should remain within Discoverer.
Does this help at all?
Regards
Michael
Similar Messages
-
Total is not getting displayed in the ALV output.
Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
IT_eventS TYPE slis_t_event,
fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
belnr TYPE dberchz-belnr,
belzart TYPE dberchz-belzart,
net TYPE dberchz-nettobtr,
END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = 'YZ_PLR'
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* IT_EXCLUDING =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = layout
it_fieldcat = fcat[]
i_tabname = 'LT_TAB'
it_events = IT_EVENTS[]
* IT_SORT =
* I_TEXT = ' '
tables
t_outtab = lt_tab[]
* EXCEPTIONS
* PROGRAM_ERROR = 1
* MAXIMUM_OF_APPENDS_REACHED = 2
* OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
GauravHi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
BELNR LIKE BSEG-BELNR,
GJAHR LIKE BSEG-GJAHR,
WRBTR LIKE BSEG-WRBTR,
WAERS LIKE BKPF-WAERS,
END OF LT_TAB.
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV,
IT_EVENTS TYPE SLIS_T_EVENT,
FCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
REC_FCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS = 1.
FCAT-FIELDNAME = 'BELNR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS = 2.
FCAT-FIELDNAME = 'GJAHR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS = 3.
FCAT-FIELDNAME = 'WRBTR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-CFIELDNAME = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME = 'BSEG'.
FCAT-DO_SUM = 'X'.
APPEND FCAT.
FCAT-COL_POS = 4.
FCAT-FIELDNAME = 'WAERS'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME = 'BKPF'.
FCAT-DO_SUM = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
WHERE BUKRS = 'MAAB'
AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT[]
I_TABNAME = 'LT_TAB'
IT_EVENTS = IT_EVENTS[]
TABLES
T_OUTTAB = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max -
Quantity fields not getting displayed in the second total row
Hi,
As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
The second total row will have different values based on a formula.
Please help me out in resolving the issue.
Thanks,
AbhishekYou can provide first row as the SUBTOTAL and next row as the TOTAL.
Get one extra column on which you can do the SUBTOTAL.
Regards,
Naimesh Patel -
hi experts,
i have created blocked ALV program.
in the o/p , it displays list of recors for open items,then list of records for cleared items.
now i want it to display sum of both open and cleared items of particular column.
in grid display it is displaying total for open and cleared items.
but in blocked alv it is not displaying total for open and closed items separately.
and also i need grand total of both.
if any body knows please tell me..Hi Sridevi
Refer this code as an example.
This code calculates the occupied column from sflight table.
TYPE-POOLS: slis.
DATA:it_fieldcat TYPE slis_t_fieldcat_alv,
is_layout TYPE slis_layout_alv,
it_events TYPE slis_t_event ,
it_sort TYPE slis_t_sortinfo_alv .
DATA: wa_fcat LIKE LINE OF it_fieldcat,
wa_sort LIKE LINE OF it_sort.
DATA: i_flight TYPE sflight_tab1.
SELECT * FROM sflight
INTO TABLE i_flight
UP TO 10 ROWS.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = 'SFLIGHT'
CHANGING
ct_fieldcat = it_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2.
wa_fcat-do_sum = 'X'.
MODIFY it_fieldcat FROM wa_fcat
TRANSPORTING do_sum WHERE fieldname = 'SEATSOCC'.
wa_sort-up = 'X'.
wa_sort-fieldname = 'CARRID'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO it_sort.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = sy-repid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = is_layout
it_fieldcat = it_fieldcat
i_tabname = 'I_FLIGHT'
it_events = it_events
it_sort = it_sort
* I_TEXT = ' '
TABLES
t_outtab = i_flight
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = is_layout
it_fieldcat = it_fieldcat
i_tabname = 'I_FLGIHT'
it_events = it_events
it_sort = it_sort
* I_TEXT = ' '
TABLES
t_outtab = i_flight
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks and Regards -
ALV Totals , Subtotals for a particular field in ALV Grid report
Hi,
I have an issue in ALV totals and subtotals.
Scenario is like this.
i have a vendor data to be pulled out of SAP and to be shown in the form of report.
i am populating all the data and doing do_sum based on Vendor ( has expansin & collapse option ) and display the number of reports .
Vendor -
100
Vendor1 -
1
Vendor2----
2.
Vendor100----
100.
but my problem is in the same report i have a date field .
if i have a five vendors created on 03/03/2008. in the same report for the date field having ( expansion & collapse ) , when i expand based on that date can i be able to sum up all the vendors created on 03/03/2008 and display in the same report along with the vendor count.
Let me know . Thank you in advance
Regards,
RyHi Roby,
Have a look at this sample code
It will help u,
REPORT ZIN_FI_AGEING
message-id zbdc
no standard page heading.
Title : For Ageing Details
Author :
Date : 22/11/2004
Transport/Correction Id :
Clarify case ID :
Application : FI
Program Type :
Frequency :
Purpose :
Comments :
Request No :
TABLES DELCARATIONS
Tables: zzgeinz9a, "Actual line item table
t001. "Plants/Branches
ALV TTPE DELCARATIONS
type-pools: slis.
*Type Declarations for Field Catalog
data : i_fldcat_head type slis_t_fieldcat_alv,
wa_fldcat_head type slis_fieldcat_alv.
*Type Declarations for ALV Events
data : i_events type slis_t_event,
wa_event like line of i_events.
*Type Declarations for Layout Design
data : wa_layout type slis_layout_alv.
*Type Declarations for Sorting Fields
data: it_sort type slis_sortinfo_alv occurs 0 with header line.
*Type Declarations for Displaying Images on Grid
data : i_comment type slis_t_listheader,
wa_comment type slis_listheader.
*Type Declarations for Grouping fields
data : wa_group type slis_sp_group_alv,
i_group type slis_t_sp_group_alv.
DATA DELCARATIONS
data: v_flag, "Status Flag
v_repid like sy-repid, "Program Name
p_year(4) type c, "Year
v_due_days type i. "To hold the due days
CONSTANTS DELCARATIONS
constants: c_x type c value 'X',
c_bukrs(4) type c value '0373'.
INTERNAL TABLES DELCARATIONS
*--Internal table to hold the required data
data: begin of it_final_vendor occurs 0,
rzzlifnr like zzgeinz9a-rzzlifnr, "Vendor
name1 like lfa1-name1, "Vendor Name
docnr like zzgeinz9a-DOCNR, "Accounting Doc No
refdocnr like zzgeinz9a-REFDOCNR, "Reference document no
belnr like bkpf-belnr, "FI Doc No
doc_date like bkpf-awkey, "Document Date
zbd1t like bsik-zbd1t, "Cash discount days 1
bldat like bkpf-bldat, "Document Date
due_date like bkpf-bldat, "Due Date
due_days type i, "Due Days
rzz_ebeln like zzgeinz9a-rzz_ebeln, "P.O. Ref No
not_due like zzgeinz9a-hsl, "Not Yet Due
hsl like zzgeinz9a-hsl, "local currency
found type c, "Existance Flag
end of it_final_vendor.
data: begin of it_final_vendor_temp occurs 0,
rzzlifnr like zzgeinz9a-rzzlifnr, "Vendor
name1 like lfa1-name1, "Vendor Name
belnr like bkpf-belnr, "FI Doc No
bldat like bkpf-bldat, "Document Date
rzz_ebeln like zzgeinz9a-rzz_ebeln, "P.O. Ref No
hsl like zzgeinz9a-hsl, "local currency
due_date like bkpf-bldat, "Due Date
due_days type i, "Due Days
not_due like zzgeinz9a-hsl, "Not Yet Due
buck_0_30 like zzgeinz9a-hsl, "Invoiceamt in localcurr
buck_31_60 like zzgeinz9a-hsl, "Invoiceamt in localcurr
buck_61_90 like zzgeinz9a-hsl, "Invoiceamt in localcurr
buck_91_180 like zzgeinz9a-hsl, "Invoiceamt in localcurr
buck_180 like zzgeinz9a-hsl, "Invoiceamt in localcurr
docnr like zzgeinz9a-DOCNR, "Accounting Doc No
refdocnr like zzgeinz9a-REFDOCNR, "Reference document no
doc_date like bkpf-awkey, "Document Date
found type c, "Existance Flag
end of it_final_vendor_temp.
data: begin of it_final_customer occurs 0,
rzzkunnr like zzgeinz9a-rzzkunnr, "Customer
name1 like kna1-name1, "Customer Name
docnr like zzgeinz9a-DOCNR, "Accounting Doc No
refdocnr like zzgeinz9a-REFDOCNR, "Reference document no
belnr like bkpf-belnr, "FI Doc No
doc_date like bkpf-awkey, "Document Date
zbd1t like bsik-zbd1t, "Cash discount days 1
bldat like bkpf-bldat, "Document Date
due_date like bkpf-bldat, "Due Date
due_days type i, "Due Days
rzz_ebeln like zzgeinz9a-rzz_ebeln, "P.O. Ref No
not_due like zzgeinz9a-hsl, "Not Yet Due
hsl like zzgeinz9a-hsl, "local currency
found type c, "Existance Flag
end of it_final_customer.
data: begin of it_final_customer_temp occurs 0,
rzzkunnr like zzgeinz9a-rzzkunnr, "Customer
name1 like kna1-name1, "Customer Name
belnr like bkpf-belnr, "FI Doc No
bldat like bkpf-bldat, "Document Date
rzz_ebeln like zzgeinz9a-rzz_ebeln, "P.O. Ref No
hsl like zzgeinz9a-hsl, "local currency
due_date like bkpf-bldat, "Due Date
due_days type i, "Due Days
not_due like zzgeinz9a-hsl, "Not Yet Due
buck_0_30 like zzgeinz9a-hsl, "Invoiceamt in localcurr
buck_31_60 like zzgeinz9a-hsl, "Invoiceamt in localcurr
buck_61_90 like zzgeinz9a-hsl, "Invoiceamt in localcurr
buck_91_180 like zzgeinz9a-hsl, "Invoiceamt in localcurr
buck_180 like zzgeinz9a-hsl, "Invoiceamt in localcurr
docnr like zzgeinz9a-DOCNR, "Accounting Doc No
refdocnr like zzgeinz9a-REFDOCNR, "Reference document no
doc_date like bkpf-awkey, "Document Date
found type c, "Existance Flag
end of it_final_customer_temp.
*--Internal Table to hold the Cash discount days 1 for Vendors
data: begin of it_final_bsik occurs 0,
belnr like bsik-belnr,
zbd1t like bsik-zbd1t,
end of it_final_bsik.
*--Internal Table to hold the Cash discount days 1 for Customers
data: begin of it_final_bsid occurs 0,
belnr like bsid-belnr,
zbd1t like bsid-zbd1t,
end of it_final_bsid.
INITIALIZATION
v_repid = sy-repid.
SELECTION SCREEN
selection-screen: begin of block b1 with frame title text-h01.
selection-screen skip.
select-options: s_vendor for zzgeinz9a-rzzlifnr modif id ven.
parameters: p_comp1 like t001-bukrs modif id ven.
parameters: p_rundt1 like bkpf-bldat modif id ven.
select-options: s_cust for zzgeinz9a-rzzkunnr modif id cst.
parameters: p_comp2 like t001-bukrs modif id cst.
parameters: p_rundt2 like bkpf-bldat modif id cst.
selection-screen skip.
selection-screen: begin of block b2 with frame title text-h02.
parameters : p_vendor radiobutton group gr1 default 'X'
user-command test,
p_cust radiobutton group gr1.
selection-screen: end of block b2.
selection-screen: end of block b1.
**************************AT Selection Screen OutPut ******************
at selection-screen output.
loop at screen.
if p_cust = 'X'.
if screen-group1 = 'VEN'.
screen-active = '0'.
screen-input = '0'.
screen-output = '0'.
screen-invisible = '0'.
endif.
elseif p_vendor = 'X'.
if screen-group1 = 'CST'.
screen-active = '0'.
screen-input = '0'.
screen-output = '0'.
screen-invisible = '0'.
endif.
endif.
modify screen.
endloop.
SELECTION SCREEN ON
at selection-screen on s_vendor.
*--Validating Vendor
if not s_vendor[] is initial.
perform validate_s_vendor.
endif.
at selection-screen on s_cust.
*--Validating Customer
if not s_cust[] is initial.
perform validate_s_cust.
endif.
at selection-screen on p_comp1.
*--Validating Company Code.
if not p_comp1 is initial.
perform validate_p_comp1.
endif.
at selection-screen on p_comp2.
*--Validating Company Code.
if not p_comp2 is initial.
perform validate_p_comp2.
endif.
START OF SELECTION
start-of-selection.
if p_vendor = 'X'.
perform get_vendor_data.
elseif p_cust = 'X'.
perform get_customer_data.
endif.
END OF SELECTION
end-of-selection.
if p_vendor = 'X'.
*--Generating the output for vendor
perform generate_field_catalog_vendor.
perform get_events_vendor.
perform generate_layout_vendor.
perform generate_sort_vendor.
perform generate_group_vendor.
perform disp_alv_grid_vendor.
elseif p_cust = 'X'.
*--Generating the output for customer
perform generate_field_catalog_cust.
perform get_events_customer.
perform generate_layout_customer.
perform generate_sort_customer.
perform generate_group_customer.
perform disp_alv_grid_customer.
endif.
*& Form validate_s_vendor
Validating the Vendor
form validate_s_vendor.
select rzzlifnr up to 1 rows
into (zzgeinz9a-rzzlifnr)
from zzgeinz9a
where rzzlifnr in s_vendor.
endselect.
if sy-subrc ne 0.
message e004 with 'Invalid Range of Vendor'(002)
s_vendor-low 'To'(006) s_vendor-high.
endif.
endform. " validate_s_vendor
*& Form validate_s_cust
Validating the Customer
form validate_s_cust.
select rzzkunnr up to 1 rows
into (zzgeinz9a-rzzkunnr)
from zzgeinz9a
where rzzkunnr in s_cust.
endselect.
if sy-subrc ne 0.
message e004 with 'Invalid Range of Customer'(005)
s_cust-low 'To'(006) s_cust-high.
endif.
endform. " validate_s_cust
*& Form validate_p_comp1
Validating the Company Code
form validate_p_comp1.
select single bukrs
into (t001-bukrs)
from t001
where bukrs eq p_comp1.
if sy-subrc ne 0.
message e004 with 'Company Code'(004) p_comp1 'Does not Exists'(003)
endif.
endform. " validate_p_comp1
*& Form validate_p_comp2
Validating the Company Code
form validate_p_comp2.
select single bukrs
into (t001-bukrs)
from t001
where bukrs eq p_comp2.
if sy-subrc ne 0.
message e004 with 'Company Code'(004) p_comp2 'Does not Exists'(003)
endif.
endform. " validate_p_comp2
*& Form get_vendor_data
Getting the Vendor Related Docs
form get_vendor_data.
select a~rzzlifnr
b~name1
a~docnr
a~refdocnr
a~rzz_ebeln
a~hsl
into corresponding fields of table it_final_vendor
from zzgeinz9a as a
inner join lfa1 as b
on arzzlifnr = blifnr
where rzzlifnr in s_vendor
and rbukrs eq p_comp1.
if sy-subrc eq 0.
v_flag = 'X'.
p_year = sy-datum+0(4).
perform get_doc_date using p_comp1
p_year.
perform move_records.
sort it_final_vendor by rzzlifnr.
perform generate_data.
else.
v_flag = space.
endif.
endform. " get_vendor_data
*& Form get_customer_data
Getting the Customer Related Docs
form get_customer_data.
select a~rzzkunnr
b~name1
a~docnr
a~refdocnr
a~rzz_ebeln
a~hsl
into corresponding fields of table it_final_customer
from zzgeinz9a as a
inner join kna1 as b
on arzzkunnr = bkunnr
where rzzkunnr in s_cust
and rbukrs eq p_comp2.
if sy-subrc eq 0.
v_flag = 'X'.
p_year = sy-datum+0(4).
perform get_doc_date_cust using p_comp2
p_year.
perform move_records_cust.
sort it_final_customer by rzzkunnr.
perform generate_data_cust.
else.
v_flag = space.
endif.
endform. " get_customer_data
*& Form get_doc_date
Getting the Document Date and FI Doc No
-->P_P_COMP1 Company Code
-->P_P_YEAR Fiscal Year
form get_doc_date using p_p_comp1
p_p_year.
loop at it_final_vendor.
concatenate it_final_vendor-refdocnr '*' into
it_final_vendor-doc_date.
modify it_final_vendor index sy-tabix.
endloop.
clear it_final_vendor.
data: v_doc_date(11) type c,
v_belnr like bkpf-belnr,
v_bldat like bkpf-bldat.
loop at it_final_vendor.
concatenate it_final_vendor-refdocnr '%' into v_doc_date.
select single belnr
bldat
into corresponding fields of it_final_vendor
from bkpf
where bukrs eq p_p_comp1
and gjahr eq p_p_year
and awkey like v_doc_date.
modify it_final_vendor.
endloop.
clear:it_final_vendor.
endform. " get_doc_date
*& Form move_records
Moving records to final internal table
form move_records.
*--Checking the existance of belnr in bsik
clear it_final_vendor.
select belnr
zbd1t
into table it_final_bsik
from bsik
for all entries in it_final_vendor
where belnr eq it_final_vendor-belnr
and bukrs eq c_bukrs.
clear it_final_bsik.
loop at it_final_vendor.
read table it_final_bsik with key belnr = it_final_vendor-belnr.
if sy-subrc eq 0.
it_final_vendor-zbd1t = it_final_bsik-zbd1t.
it_final_vendor-due_date = it_final_vendor-bldat +
it_final_bsik-zbd1t.
it_final_vendor-found = 'X'.
modify it_final_vendor.
endif.
endloop.
endform. " move_records
*& Form generate_data
Segregating the records based on due_date
form generate_data.
delete it_final_vendor[] where found ne 'X'.
sort it_final_vendor by belnr.
loop at it_final_vendor.
if it_final_vendor-due_date > p_rundt1.
move-corresponding it_final_vendor to it_final_vendor_temp.
move it_final_vendor-hsl to it_final_vendor_temp-not_due.
elseif it_final_vendor-due_date < p_rundt1.
it_final_vendor-due_days = p_rundt1 - it_final_vendor-DUE_DATE.
endif.
*--filling 0-30 bucket.
if it_final_vendor-due_days ge 0 AND it_final_vendor-due_days le 30.
move-corresponding it_final_vendor to it_final_vendor_temp.
move it_final_vendor-hsl to it_final_vendor_temp-buck_0_30.
*--filling 31-60 bucket.
elseif it_final_vendor-due_days ge 31 AND it_final_vendor-due_days le 60
move-corresponding it_final_vendor to it_final_vendor_temp.
move it_final_vendor-hsl to it_final_vendor_temp-buck_31_60.
*--filling 61-90 bucket.
elseif it_final_vendor-due_days ge 61 AND it_final_vendor-due_days le 90
move-corresponding it_final_vendor to it_final_vendor_temp.
move it_final_vendor-hsl to it_final_vendor_temp-buck_61_90.
*--filling 91-180 bucket.
elseif it_final_vendor-due_days ge 91 AND it_final_vendor-due_days
le 180.
move-corresponding it_final_vendor to it_final_vendor_temp.
move it_final_vendor-hsl to it_final_vendor_temp-buck_91_180.
*--filling 180 bucket.
elseif it_final_vendor-due_days gt 180.
move-corresponding it_final_vendor to it_final_vendor_temp.
move it_final_vendor-hsl to it_final_vendor_temp-buck_180.
endif.
append it_final_vendor_temp.
clear it_final_vendor_temp.
endloop.
endform. " generate_data
*& Form DISP_ALV_GRID_VENDOR
Displaying the output in grid For Vendor
form DISP_ALV_GRID_VENDOR.
*--Generating the OUTPUT GRID FOR VENDOR
call function 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = wa_layout
IT_FIELDCAT = i_fldcat_head
IT_EXCLUDING =
IT_SPECIAL_GROUPS = i_group
IT_SORT = it_sort[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = i_events
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = it_final_vendor_temp
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISP_ALV_GRID
*& Form get_doc_date_cust
text
-->P_P_COMP2 Company Code
-->P_P_YEAR Fiscal Year
form get_doc_date_cust using p_p_comp2
p_p_year.
loop at it_final_customer.
concatenate it_final_customer-refdocnr '*' into
it_final_customer-doc_date.
modify it_final_customer index sy-tabix.
endloop.
clear it_final_customer.
data: v_doc_date(11) type c,
v_belnr like bkpf-belnr,
v_bldat like bkpf-bldat.
loop at it_final_customer.
concatenate it_final_customer-refdocnr '%' into v_doc_date.
select single belnr
bldat
into corresponding fields of it_final_customer
from bkpf
where bukrs eq p_p_comp2
and gjahr eq p_p_year
and awkey like v_doc_date.
modify it_final_customer.
endloop.
clear:it_final_customer.
endform. " get_doc_date_cust
*& Form move_records_cust
Moving Customer Data to Final Internal Table
form move_records_cust.
*--Checking the existance of belnr in bsid
select belnr
zbd1t
into table it_final_bsid
from bsid
for all entries in it_final_customer
where belnr eq it_final_customer-belnr
and bukrs eq c_bukrs.
clear it_final_bsid.
loop at it_final_customer.
read table it_final_bsid with key belnr = it_final_customer-belnr.
if sy-subrc eq 0.
it_final_customer-zbd1t = it_final_bsid-zbd1t.
it_final_customer-due_date = it_final_customer-bldat +
it_final_bsid-zbd1t.
it_final_customer-found = 'X'.
modify it_final_customer.
endif.
endloop.
endform. " move_records_cust
*& Form generate_data_cust
Generating the Customer Output
form generate_data_cust.
delete it_final_customer[] where found ne 'X'.
sort it_final_customer by belnr.
loop at it_final_customer.
if it_final_customer-due_date > p_rundt2.
move-corresponding it_final_customer to it_final_customer_temp.
move it_final_customer-hsl to it_final_customer_temp-not_due.
elseif it_final_customer-due_date < p_rundt2.
it_final_customer-due_days = p_rundt2 - it_final_customer-DUE_DATE.
endif.
*--filling 0-30 bucket.
if it_final_customer-due_days ge 0 AND it_final_customer-due_days le 30
move-corresponding it_final_customer to it_final_customer_temp.
move it_final_customer-hsl to it_final_customer_temp-buck_0_30.
*--filling 31-60 bucket.
elseif it_final_customer-due_days ge 31 AND it_final_customer-due_days
le 60
move-corresponding it_final_customer to it_final_customer_temp.
move it_final_customer-hsl to it_final_customer_temp-buck_31_60.
*--filling 61-90 bucket.
elseif it_final_customer-due_days ge 61 AND it_final_customer-due_days
le 90
move-corresponding it_final_customer to it_final_customer_temp.
move it_final_customer-hsl to it_final_customer_temp-buck_61_90.
*--filling 91-180 bucket.
elseif it_final_customer-due_days ge 91 AND
it_final_customer-due_days
le 180.
move-corresponding it_final_customer to it_final_customer_temp.
move it_final_customer-hsl to it_final_customer_temp-buck_91_180.
*--filling 180 bucket.
elseif it_final_customer-due_days gt 180.
move-corresponding it_final_customer to it_final_customer_temp.
move it_final_customer-hsl to it_final_customer_temp-buck_180.
endif.
append it_final_customer_temp.
clear it_final_customer_temp.
endloop.
endform. " generate_data_cust
*& Form generate_field_catalog_vendor
Generating the Field Catalog for Vendor
form generate_field_catalog_vendor.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = v_repid
I_INTERNAL_TABNAME = 'IT_FINAL_VENDOR_TEMP'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = v_repid
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
changing
ct_fieldcat = i_fldcat_head
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
if not i_fldcat_head[] is initial.
loop at i_fldcat_head into wa_fldcat_head.
case wa_fldcat_head-fieldname.
when 'RZZLIFNR'.
wa_fldcat_head-col_pos = '1'.
wa_fldcat_head-ref_tabname = ' '.
wa_fldcat_head-seltext_m = 'Vendor No'(001).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '12'.
when 'NAME1'.
wa_fldcat_head-col_pos = '2'.
wa_fldcat_head-seltext_m = 'Vendor Name'(007).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '35'.
when 'BELNR'.
wa_fldcat_head-col_pos = '3'.
wa_fldcat_head-seltext_m = 'Invoice No'(008).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '12'.
wa_fldcat_head-KEY = ' '.
when 'BLDAT'.
wa_fldcat_head-col_pos = '4'.
wa_fldcat_head-seltext_m = 'Document Date'(009).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '13'.
wa_fldcat_head-ref_tabname = ' '.
when 'RZZ_EBELN'.
wa_fldcat_head-col_pos = '5'.
wa_fldcat_head-seltext_m = 'PO.Ref.No'(010).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '13'.
wa_fldcat_head-ref_tabname = ' '.
when 'HSL'.
wa_fldcat_head-col_pos = '6'.
wa_fldcat_head-seltext_m = 'Invoice Amount'(011).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '16'.
wa_fldcat_head-do_sum = 'X'.
when 'DUE_DATE'.
wa_fldcat_head-col_pos = '7'.
wa_fldcat_head-seltext_m = 'Due Date'(012).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '12'.
wa_fldcat_head-ref_tabname = ' '.
when 'DUE_DAYS'.
wa_fldcat_head-col_pos = '8'.
wa_fldcat_head-seltext_m = 'Due Days'(013).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '9'.
when 'NOT_DUE'.
wa_fldcat_head-col_pos = '9'.
wa_fldcat_head-seltext_m = 'Not Due'(014).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '16'.
wa_fldcat_head-do_sum = 'X'.
when 'BUCK_0_30'.
wa_fldcat_head-col_pos = '10'.
wa_fldcat_head-seltext_m = '0 To 30'(015).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '16'.
wa_fldcat_head-do_sum = 'X'.
when 'BUCK_31_60'.
wa_fldcat_head-col_pos = '11'.
wa_fldcat_head-seltext_m = '31 To 60'(016).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '16'.
wa_fldcat_head-do_sum = 'X'.
when 'BUCK_61_90'.
wa_fldcat_head-col_pos = '12'.
wa_fldcat_head-seltext_m = '61 To 90'(017).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '16'.
wa_fldcat_head-do_sum = 'X'.
when 'BUCK_91_180'.
wa_fldcat_head-col_pos = '13'.
wa_fldcat_head-seltext_m = '91 To 180'(018).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '16'.
wa_fldcat_head-do_sum = 'X'.
when 'BUCK_180'.
wa_fldcat_head-col_pos = '14'.
wa_fldcat_head-seltext_m = 'Beyond 180'(019).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '16'.
wa_fldcat_head-do_sum = 'X'.
when 'DOCNR'.
wa_fldcat_head-no_out = 'X'.
when 'REFDOCNR'.
wa_fldcat_head-no_out = 'X'.
when 'DOC_DATE'.
wa_fldcat_head-no_out = 'X'.
when 'FOUND'.
wa_fldcat_head-no_out = 'X'.
endcase.
modify i_fldcat_head from wa_fldcat_head index sy-tabix.
endloop.
endif.
endform. " generate_field_catalog_vendor
*& Form get_events_vendor
Getting ALV Events
form get_events_vendor.
call function 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
importing
et_events = i_events
exceptions
list_type_wrong = 1
others = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
if not i_events[] is initial.
read table i_events into wa_event with key name = 'TOP_OF_PAGE'(024)
wa_event-form = 'GENERATE_USERCOMMAND'.
modify i_events from wa_event index sy-tabix.
read table i_events into wa_event with key name = 'END_OF_LIST'(025)
wa_event-form = 'GENERATE_USERCOMMAND_FOOTER'.
modify i_events from wa_event index sy-tabix.
endif.
endform. " get_events_vendor
*& Form GENERATE_USERCOMMAND
Displaying Header-Text and Logo on Grid
form generate_usercommand .
clear i_comment[].
wa_comment-typ = 'H'.
wa_comment-info = 'Vendor Ageing Report'(026).
append wa_comment to i_comment.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = i_comment
i_logo = 'ENJOYSAP_LOGO'
I_END_OF_LIST_GRID = 'X'
endform. " GENERATE_USERCOMMAND
*& Form GENERATE_USERCOMMAND_FOOTER
Displaying Footer-Text on Grid
form generate_usercommand_footer.
clear i_comment[].
clear wa_comment.
wa_comment-typ = 'S'.
wa_comment-key = 'GE-Betz'(027).
append wa_comment to i_comment.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = i_comment
I_LOGO = ''
i_end_of_list_grid = 'X'.
endform. " GENERATE_USERCOMMAND_FOOTER
*& Form generate_layout_vendor
Generating the ALV Layout
form generate_layout_vendor.
WA_LAYOUT-COLWIDTH_OPTIMIZE = 'X'. "OPTIMIZING FIELD WIDTH
wa_layout-zebra = 'X'. "PUTTING ZEBRA COLORS
wa_layout-confirmation_prompt = 'X'. "DISPLAYS CONFIRMATION DIALOG
wa_layout-totals_text = 'Totals'(028). "DISPLAYS TOTALS TEXT
wa_layout-subtotals_text = 'Sub Totals'(029)."DISPLAYS SUBTOTALS TEXT
endform. " generate_layout_vendor
*& Form generate_sort_vendor
Sorting the Internal Table by Vendor
form generate_sort_vendor.
it_sort-fieldname = 'RZZLIFNR'.
it_sort-tabname = 'IT_FINAL_VENDOR_TEMP'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
append it_sort.
endform. " generate_sort_vendor
*& Form generate_group_vendor
Grouping the Data
form generate_group_vendor.
clear i_group.
wa_group-sp_group = 'A'.
wa_group-text = 'RZZLIFNR'.
append wa_group to i_group.
endform. " generate_group_vendor
*& Form GENERATE_FIELD_CATALOG_CUST
Generating Field Catalog for Customer
form GENERATE_FIELD_CATALOG_CUST.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = v_repid
I_INTERNAL_TABNAME = 'IT_FINAL_CUSTOMER_TEMP'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = v_repid
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
changing
ct_fieldcat = i_fldcat_head
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
if not i_fldcat_head[] is initial.
loop at i_fldcat_head into wa_fldcat_head.
case wa_fldcat_head-fieldname.
when 'RZZKUNNR'.
wa_fldcat_head-col_pos = '1'.
wa_fldcat_head-ref_tabname = ' '.
wa_fldcat_head-seltext_m = 'Customer No'(020).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '12'.
when 'NAME1'.
wa_fldcat_head-col_pos = '2'.
wa_fldcat_head-seltext_m = 'Customer Name'(021).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '35'.
when 'BELNR'.
wa_fldcat_head-col_pos = '3'.
wa_fldcat_head-seltext_m = 'Invoice No'(008).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '12'.
wa_fldcat_head-KEY = ' '.
when 'BLDAT'.
wa_fldcat_head-col_pos = '4'.
wa_fldcat_head-seltext_m = 'Document Date'(009).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '13'.
wa_fldcat_head-ref_tabname = ' '.
when 'RZZ_EBELN'.
wa_fldcat_head-col_pos = '5'.
wa_fldcat_head-seltext_m = 'PO.Ref.No'(010).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '13'.
wa_fldcat_head-ref_tabname = ' '.
when 'HSL'.
wa_fldcat_head-col_pos = '6'.
wa_fldcat_head-seltext_m = 'Invoice Amount'(011).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '16'.
wa_fldcat_head-do_sum = 'X'.
when 'DUE_DATE'.
wa_fldcat_head-col_pos = '7'.
wa_fldcat_head-seltext_m = 'Due Date'(012).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '12'.
wa_fldcat_head-ref_tabname = ' '.
when 'DUE_DAYS'.
wa_fldcat_head-col_pos = '8'.
wa_fldcat_head-seltext_m = 'Due Days'(013).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '9'.
when 'NOT_DUE'.
wa_fldcat_head-col_pos = '9'.
wa_fldcat_head-seltext_m = 'Not Due'(014).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '16'.
wa_fldcat_head-do_sum = 'X'.
when 'BUCK_0_30'.
wa_fldcat_head-col_pos = '10'.
wa_fldcat_head-seltext_m = '0 To 30'(015).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '16'.
wa_fldcat_head-do_sum = 'X'.
when 'BUCK_31_60'.
wa_fldcat_head-col_pos = '11'.
wa_fldcat_head-seltext_m = '31 To 60'(016).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '16'.
wa_fldcat_head-do_sum = 'X'.
when 'BUCK_61_90'.
wa_fldcat_head-col_pos = '12'.
wa_fldcat_head-seltext_m = '61 To 90'(017).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '16'.
wa_fldcat_head-do_sum = 'X'.
when 'BUCK_91_180'.
wa_fldcat_head-col_pos = '13'.
wa_fldcat_head-seltext_m = '91 To 180'(018).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '16'.
wa_fldcat_head-do_sum = 'X'.
when 'BUCK_180'.
wa_fldcat_head-col_pos = '14'.
wa_fldcat_head-seltext_m = 'Beyond 180'(019).
wa_fldcat_head-ddictxt = 'M'.
wa_fldcat_head-outputlen = '16'.
wa_fldcat_head-do_sum = 'X'.
when 'DOCNR'.
wa_fldcat_head-no_out = 'X'.
when 'REFDOCNR'.
wa_fldcat_head-no_out = 'X'.
when 'DOC_DATE'.
wa_fldcat_head-no_out = 'X'.
when 'FOUND'.
wa_fldcat_head-no_out = 'X'.
endcase.
modify i_fldcat_head from wa_fldcat_head index sy-tabix.
endloop.
endif.
endform. " GENERATE_FIELD_CATALOG_CUST
*& Form get_events_customer
Getting ALV Events
form get_events_customer.
call function 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
importing
et_events = i_events
exceptions
list_type_wrong = 1
others = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
if not i_events[] is initial.
read table i_events into wa_event with key name = 'TOP_OF_PAGE'(024)
wa_event-form = 'GENERATE_USERCOMMAND_CUST'.
modify i_events from wa_event index sy-tabix.
read table i_events into wa_event with key na -
Regd: Calculation of TOTAL field in ALV report
Hi All,
We have a scenario that we are not getting the total value for numeric fields in ALV report.
Below i have given the code used for it.
G_KEY = 'X'.
G_NOKEY = SPACE.
G_SUM = 'X'.
G_NOSUM = SPACE.
PERFORM BUILD_FIELDCAT USING 'VBELN' G_KEY G_NOSUM.
PERFORM BUILD_FIELDCAT USING 'BLDAT' G_NOKEY G_NOSUM.
PERFORM BUILD_FIELDCAT USING 'VGBEL' G_KEY G_NOSUM.
PERFORM BUILD_FIELDCAT USING 'POSNR' G_KEY G_NOSUM.
PERFORM BUILD_FIELDCAT USING 'MATNR' G_KEY G_NOSUM..
PERFORM BUILD_FIELDCAT USING 'LFIMG' G_NOKEY G_NOSUM.
PERFORM BUILD_FIELDCAT USING 'VRKME' G_NOKEY G_NOSUM.
PERFORM BUILD_FIELDCAT USING 'NETPR' G_NOKEY G_NOSUM.
PERFORM BUILD_FIELDCAT USING 'BRTWR' G_NOKEY G_NOSUM.
PERFORM BUILD_FIELDCAT USING 'VALUE_INR' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'B_DUTY' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'S_TOTAL1' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'CV_DUTY' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'C_CVD' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'S_TOTAL2' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'C_DUTY' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'S_TOTAL3' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'A_DUTY' G_NOKEY G_SUM.
PERFORM BUILD_FIELDCAT USING 'T_DUTY' G_NOKEY G_SUM.
PERFORM BUILD_LAYOUT.
PERFORM BUILD_DISPLAY.
*& Form DISPLAY
text
FORM BUILD_DISPLAY.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = ' '
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = TEXT-000
I_GRID_SETTINGS =
IS_LAYOUT = IG_LAYOUT
IT_FIELDCAT = IG_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IG_INBOUND
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "DISPLAY
*& Form BUILD_FIELDCAT
text
-->G_FIELDNAME text
-->L_KEY text
-->L_SUM text
FORM BUILD_FIELDCAT USING L_FIELDNAME LIKE DD03L-FIELDNAME L_KEY TYPE C L_SUM TYPE C.
CLEAR WG_FIELDCAT_LN.
ADD 1 TO G_COL_POS.
WG_FIELDCAT_LN-REF_TABNAME = 'IG_INBOUND'.
WG_FIELDCAT_LN-FIELDNAME = L_FIELDNAME.
WG_FIELDCAT_LN-KEY = L_KEY.
WG_FIELDCAT_LN-DO_SUM = L_SUM.
WG_FIELDCAT_LN-COL_POS = G_COL_POS.
WG_FIELDCAT_LN-NO_OUT = SPACE.
WG_FIELDCAT_LN-QFIELDNAME = SPACE.
WG_FIELDCAT_LN-HOTSPOT = SPACE.
APPEND WG_FIELDCAT_LN TO IG_FIELDCAT.
ENDFORM. "BUILD_FIELDCAT
*& Form BUILD_LAYOUT
text
FORM BUILD_LAYOUT.
IG_LAYOUT-TOTALS_TEXT = 'Total Amount'.
*IG_LAYOUT-SUBTOTALS_TEXT = 'A'.
IG_LAYOUT-ZEBRA = 'X'.
ENDFORM.
Help and Sugesstions will be much appreciated.
Thanks & Regds.
Ramesh.This is sample program for the same
REPORT Z_50657_ALV_EX2
NO STANDARD PAGE HEADING
LINE-COUNT 65(3)
LINE-SIZE 220
MESSAGE-ID ZZ.
* Type Pools *
TYPE-POOLS: SLIS, ICON.
* Tables *
TABLES: VBAK. "Sales Document Data
* Internal Tables *
* TABLE TO HOLD DATA OF SALES DOCUMENT
DATA: BEGIN OF IT_VBAK OCCURS 0,
VBELN LIKE VBAK-VBELN, "Sales Document
VBTYP LIKE VBAK-VBTYP, "SD document category
AUDAT LIKE VBAK-AUDAT, "Document date (date received/sent)
AUGRU LIKE VBAK-AUGRU, "Order reason (reason for the business)
AUART LIKE VBAK-AUART, "Sales Document Type
NETWR LIKE VBAK-NETWR, "Net Sales Order in Doc. Currency
WAERK LIKE VBAK-WAERK, "SD document currency
ICON TYPE ICON-ID, "traffic lights
END OF IT_VBAK.
* Work Areas *
*WORK AREAS DEFINED FOR ALV'S
DATA: WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV, "field catalog
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV, "field catalog ITAB
WA_SORT TYPE SLIS_SORTINFO_ALV, "SORT work area
IT_SORT TYPE SLIS_T_SORTINFO_ALV, "SORT ITAB
LAYOUT TYPE SLIS_LAYOUT_ALV, "LAYOUT
WA_FCODE TYPE SLIS_EXTAB, "FUN CODE
I_FCODE_EXTAB TYPE SLIS_T_EXTAB,
WA_EVENTS TYPE SLIS_ALV_EVENT,
IT_EVENTS TYPE SLIS_T_EVENT.
* Selection-Screen *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN.
PARAMETERS: P_VBTYP LIKE VBAK-VBTYP DEFAULT 'C'.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME.
PARAMETERS: LIST RADIOBUTTON GROUP G1,
GRID RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
* At Selection-Screen *
*VALIDATION
* Start of Selection *
START-OF-SELECTION.
*POPULATION OF DATA INTO INTERNAL TABLE ITAB
PERFORM GET_DATA.
*DEFINE USER DEFINED FIELDCATALOG
PERFORM DEFINE_FIELDCATALOG.
*SUBTOTALS AND TOTALS DISPLAY USING SORT
PERFORM SORT_LIST.
*CHANGE FCODE OF STATUS
PERFORM CHANGE_FCODE.
*CHECK RADIOBUTTON OPTION AND ACCORDINGLY FINAL DISPLAY
PERFORM CHECK_OPTION.
*& Form GET_DATA
* text
FORM GET_DATA.
SELECT VBELN
VBTYP
AUDAT
AUGRU
AUART
NETWR
WAERK FROM VBAK INTO TABLE IT_VBAK
WHERE VBELN IN S_VBELN AND VBTYP = P_VBTYP
AND ERDAT > '01.01.2004' AND NETWR > 0.
LOOP AT IT_VBAK.
IF IT_VBAK-NETWR < 10000.
IT_VBAK-ICON = '@08@'.
ELSEIF IT_VBAK-NETWR > 100000.
IT_VBAK-ICON = '@0A@'.
ELSE.
IT_VBAK-ICON = '@09@'.
ENDIF.
MODIFY IT_VBAK INDEX SY-TABIX.
ENDLOOP.
ENDFORM. "GET_DATA
*& Form CHECK_OPTION
* text
FORM CHECK_OPTION.
WA_EVENTS-NAME = 'TOP_OF_PAGE'.
WA_EVENTS-FORM = 'TOP'.
APPEND WA_EVENTS TO IT_EVENTS.
CLEAR WA_EVENTS.
WA_EVENTS-NAME = 'END_OF_LIST'.
WA_EVENTS-FORM = 'END_LIST'.
APPEND WA_EVENTS TO IT_EVENTS.
CLEAR WA_EVENTS.
IF LIST = 'X'.
PERFORM LIST_DISP.
ENDIF.
IF GRID = 'X'.
PERFORM GRID_DISP.
ENDIF.
ENDFORM. "CHECK_OPTION
*& Form DEFINE_FIELDCATALOG
* text
FORM DEFINE_FIELDCATALOG.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-FIELDNAME = 'ICON'.
WA_FIELDCAT-SELTEXT_L = 'ICON'.
WA_FIELDCAT-ICON = 'X'.
WA_FIELDCAT-OUTPUTLEN = 8.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC NO.'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-FIELDNAME = 'AUDAT'.
WA_FIELDCAT-SELTEXT_L = 'CREATED ON'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 4.
WA_FIELDCAT-FIELDNAME = 'VBTYP'.
WA_FIELDCAT-SELTEXT_L = 'CATEGORY'.
WA_FIELDCAT-OUTPUTLEN = 1.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 6.
WA_FIELDCAT-FIELDNAME = 'AUGRU'.
WA_FIELDCAT-SELTEXT_L = 'REASON'.
WA_FIELDCAT-OUTPUTLEN = 3.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 5.
WA_FIELDCAT-FIELDNAME = 'AUART'.
WA_FIELDCAT-SELTEXT_L = 'DOC TYPE'.
WA_FIELDCAT-OUTPUTLEN = 4.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 7.
WA_FIELDCAT-FIELDNAME = 'NETWR'.
WA_FIELDCAT-SELTEXT_L = 'NET VALUE'.
WA_FIELDCAT-OUTPUTLEN = 17.
WA_FIELDCAT-DECIMALS_OUT = 2.
* WA_FIELDCAT-DO_SUM = 'X'.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 8.
WA_FIELDCAT-FIELDNAME = 'WAERK'.
WA_FIELDCAT-SELTEXT_L = 'UNIT'.
WA_FIELDCAT-OUTPUTLEN = 50.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "DEFINE_FIELDCATALOG
*& Form DEFINE_LAYOUT
* text
FORM DEFINE_LAYOUT.
LAYOUT-ZEBRA = 'X'.
LAYOUT-SUBTOTALS_TEXT = 'SUBTOTAL SUM'.
LAYOUT-WINDOW_TITLEBAR = 'EXERCISE 2'.
LAYOUT-TOTALS_TEXT = 'TOTAL'.
ENDFORM. "DEFINE_LAYOUT
*& Form SORT_LIST
* text
FORM SORT_LIST.
WA_SORT-FIELDNAME = 'VBELN'.
WA_SORT-TABNAME = 'IT_VBAK'.
WA_SORT-SPOS = 1.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'NETWR'.
WA_SORT-TABNAME = 'IT_VBAK'.
WA_SORT-UP = 'X'.
WA_SORT-SPOS = 2.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
ENDFORM. "SORT_LIST
*& Form LIST_DISP
* text
FORM LIST_DISP.
PERFORM DEFINE_LAYOUT.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IT_FIELDCAT = IT_FIELDCAT
IS_LAYOUT = LAYOUT
IT_SORT = IT_SORT
I_CALLBACK_PF_STATUS_SET = 'STATUS'
IT_EXCLUDING = I_FCODE_EXTAB
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_EVENTS = IT_EVENTS[]
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBAK
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "LIST_DISP
*& Form GRID_DISP
* text
FORM GRID_DISP.
PERFORM DEFINE_LAYOUT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_SORT = IT_SORT
I_CALLBACK_PF_STATUS_SET = 'STATUS'
IT_EXCLUDING = I_FCODE_EXTAB
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_EVENTS = IT_EVENTS[]
TABLES
T_OUTTAB = IT_VBAK.
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "GRID_DISP
*& Form STATUS
* text
* -->P_EXTAB text
FORM STATUS USING P_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING P_EXTAB.
ENDFORM. "STATUS
*& Form USER_COMMAND
* text
* -->R_UCOMM text
* -->RS_SELFIELD text
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN 'BACK' OR 'CANC' OR 'EXIT'.
LEAVE TO SCREEN 0.
WHEN '&IC1'.
SET PARAMETER ID 'AUN' FIELD RS_SELFIELD-VALUE.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM. "USER_COMMAND
*& Form CHANGE_FCODE
* text
FORM CHANGE_FCODE.
WA_FCODE = 'PRNT'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&OAD'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&AVE'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&EB9'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&SUM'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&UMC'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&XPA'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&OMP'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
ENDFORM. "CHANGE_FCODE
*& Form TOP
* text
FORM TOP.
IF LIST = 'X'.
WRITE:/ SY-ULINE.
WRITE:/ 'DATE:', SY-DATUM,55 'INTELLIGROUP ASIA PVT LTD'.
WRITE:/ 'TIME:', SY-UZEIT.
WRITE:/ 'USER NAME:', SY-UNAME,60 SY-TITLE.
WRITE:/ 'PAGE', SY-PAGNO.
WRITE:/ SY-ULINE.
ENDIF.
IF GRID = 'X'.
DATA: LS_LINE TYPE SLIS_LISTHEADER,
E04_LT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
* Listenüberschrift: Typ H
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
* LS_LINE-KEY: not used for this type
LS_LINE-INFO = 'Summary'.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
* Kopfinfo: Typ S
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'Intelligroup'.
LS_LINE-INFO = ''.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
LS_LINE-KEY = 'ASIA'.
LS_LINE-INFO = 'PVT LTD'.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
* Aktionsinfo: Typ A
CLEAR LS_LINE.
LS_LINE-TYP = 'A'.
* LS_LINE-KEY: not used for this type
LS_LINE-INFO = 'truman'.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = E04_LT_TOP_OF_PAGE
I_LOGO = 'ENJOY_SAP_LOGO'.
ENDIF.
ENDFORM. "TOP
*& Form END_LIST
* text
FORM END_LIST.
IF LIST = 'X'.
SKIP 2.
WRITE:/60 'END OF PAGE'.
ENDIF.
IF GRID = 'X'.
DATA: LS_LINE TYPE SLIS_LISTHEADER,
E04_LT_END_OF_LIST TYPE SLIS_T_LISTHEADER.
* Listenüberschrift: Typ H
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
* LS_LINE-KEY: not used for this type
LS_LINE-INFO = 'Summary'.
APPEND LS_LINE TO E04_LT_END_OF_LIST.
* Kopfinfo: Typ S
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'Intelligroup'.
LS_LINE-INFO = ''.
APPEND LS_LINE TO E04_LT_END_OF_LIST.
LS_LINE-KEY = 'ASIA'.
LS_LINE-INFO = 'PVT LTD'.
APPEND LS_LINE TO E04_LT_END_OF_LIST.
* Aktionsinfo: Typ A
CLEAR LS_LINE.
LS_LINE-TYP = 'A'.
* LS_LINE-KEY: not used for this type
LS_LINE-INFO = TEXT-105.
APPEND LS_LINE TO E04_LT_END_OF_LIST.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = E04_LT_END_OF_LIST.
ENDIF.
ENDFORM. "END_LIST -
Report on open sales order ,total sales
Hello Gurus
I am developing a report line item wise of sales order in which i need to get
Suppose a sales order is created on 01.12.2009 for 1000 quantity
billed quantity in december 600
billed quantity in january 200
1) total sales done against this SO line item wise.
2) sales in this month againt this SO
3)open order qty as 01.01.2010
4)last day sales i.e from 01.01.2010 to 20.01.2010 the date of last sales against this SO
so my output should be
total sales = 800
sales in this month =200
open order qty as on 01.01.2010= 400
please tell me the logic
regards
sphoorthi
Moderator message - Please do not post your requirements and ask the forum to do your work for you - post locked
Edited by: Rob Burbank on Jan 20, 2010 10:47 AMHi,
I gather from your thread that the question is not to build a report on a MP yes/no but more on which MP.
Depending on the reporting needs and on how well you are able to combine the 2 cubes in the new MP I would say go for the latter option so you have more control on this one MP (for example if you need to add something that is already available in cubes).
However, when (future!) reporting needs could mean that characteristics need to be added to the report(s) and filtered on that are not in both cubes you will have major problems getting the data properly from new MP and you would be better off using the individuals MP's and combine the data in a workbook or in a web template giving more flexibility.
So you need to really analyze the requirements and decide on the way forward. Keep in mind possible future requirements because for now it could seem these few fields could be enough but new requirements could directly give a problem.
Hope this helps
C. -
We are running Oracle BI Discoverer Viewer version 11.1.1.4.0. When we upgraded to this version we lost some functionality. In the previous version the report displayed the number of rows the query returned. Now the row totals display only under certain conditions. For instance, I have a inventory report name INV-REP-120 and it prompts the user for 6 parameters & displays 6 columns of data. One of the parameters is named ‘Keyword' and I’ll use this one in the problem description. When I set the keyword parameter to ‘HINGE’ The bar at the top of the results sheet it displays:
‘Rows 1-25 of 81, Columns 1-6 of 9’
When I change the keyword to ‘TUBE’ the viewer displays:
‘Rows 1-25, Columns 1-6 of 9’
The total rows are not displayed but the number of pages. It appears that if the total number of rows is less than 200 then the row total is displayed. I changed the rows displayed from 25 to 100 and scrolled down to the last page and now the reports displays:
‘451 – 458 of 458, Columns 1-6 of 9’
When I use the key word TEE I get :
‘Rows 1-50, Columns 1-6 of 9’
There are 596 tees, which would be about 12 pages of 50 rows. I noticed that at the top of table there is a field ‘Page 1 of 5.’ It looks like if there are more than 5 pages it does not display the total number of rows.
There seems to be some interaction between the total number of rows the number of rows per page and perhaps a setup on the back-end that determines whether or not the row total is displayed. How can I configure the viewer at the front-end and/or back-end to consistently display the row total for a report? Is there a Discoverer preference located in the pref.txt in the apps server that controls this?Hi,
You can inform to your SP to edit the table EUL4_documents
and ask him to modify the name of the report that is stored in the column DOC_NAME .There is absolutely no necessary to open the work book that is stored in the database and change the work book name
Regards
Swamy! -
Is there a way to create a field with total pages viewed?
Is there a way to create a field for a contact that stores the total # of pages he has ever viewed? We'd like to use this as a bases for lead scoring.
Please don't use big red text. There's no need to do so - it won't be more attention and in fact may put people off of helping - and it's really difficult to read.
Adding to what JG said, you can also purchase a prepaid iTunes card, available from most grocery store and discount chains in the US and other countries, and use that. You will need to enter in your address information, but you won't need a credit card.
Regards. -
How do I find the total size of all my Music in iTunes 11?
I'm looking to get a new iPod, either a nano or Touch, so I'm trying to find the total size of all of my Music. Since iTunes 11's interface is so different from previous versions, I don't see a way to view that.
Ctrl B to show top menu
View Show Status Bar to show the grey bar at the bottom with the info you want.
While your there View> Show Sidebar and see if you prefer that. -
At a total loss how to export IPhone 4 video To My PC
I've read and posted in various threads and looked all over the net. I admit I'm at a total loss as what I'm doing wrong at this point.
I want to take the video from my Iphone and move it to my PC so I can upload it in HD to youtube.
I've made sure to make sure my phone doesn't sync right away, gone to the my computer and click on my phone (shows a camera), then copy and paste or drag. When it moves it over it say 0 bytes.
I'll even post a link a buddy of mine sent and if you look at step 9 it says the videos should be quick time files. Mine says nothing where it says file types.
http://www.notebooks.com/2010/06/29/how-to-get-hd-video-from-you-iphone-4/
Is there something I'm doing wrong? Like I said I'm at a total loss.I'm not sure if this will help you, but I ran across the same issue. When I tried to pull the videos off the phone in windows, it would hang during the transfer, or not transfer at all. My photos and videos are kept on an external drive and I was trying to copy to that external drive. I copy and pasted the videos into the pictures folder on my PC (instead of the external drive) and it worked like a charm. Once that was done, I just had to drag and drop into the external drive.
I hope that helps! -
SSRS with DAX - parameters multivalue vs total element
Hi all,
I'm using SSRS on top of a SSAS tabular model to create intuitive dashboards for management department.
One thing I'm struggling with is the lack of a "total" on parameters. What I'm doing is, based on the fact table, I create the datasets that will feed each parameter, so it only has the dimension members available on the fact table. That is fine
performance wise, you only have 1 element and it renders very quickly.
For a management perspective at a higher level it is important to view the totals to have the big picture of the information. In my project we are in a University, so I have the parameters Year, school (there are several schools in the university campus)
and the course (computer sciences, math, statistics, etc).
At first glance, if I'm a course coordinador I want to pick my course and have a global view, and I'm achiveing that, but imagine now, that I am the school coordinator, or the university coordenator.
I want to see the aggregate values by all courses or by all schools.
In my view I have 2 ways to do this and I come from a tradition cubes background:
1 - I would use the all element the cubes hierarchy have on each attribute
2 - I would use multivalue parameters with StrToSet (worse performance)
Using DAX what is your approach?
Best regardsHi AsifMehmood,
Per my understanding you have create an SSRS report with SharePoint list, now you don’t know to create the distinct parameters by using CAML query, right?
For the CAML language doesn’t have any reserved word (or tag) to set this particular filter to remove duplicate results, but we can use the custom code to do this function. I have tested on my local environment and we can do that by create one hidden parameter(Param1)
to get all the values from the fields which will add the filter and then create another parameter(Param2) to get the distinct values based on the Param1, we use the custom code to do the deduplication.
Step by Steps information in below thread for your reference to create the parameters and the custom code:
"How to get distinct values of sharepoint column using SSRS"
Other similar thread for your reference:
https://audministrator.wordpress.com/2014/02/17/sharepoint-list-add-distinct-parameter-value/
If your problem still exists, please feel free to ask and also try to provide us more details information.
Regards
Vicky Liu -
SSRS 2008 R2 Report - Sum Totals of a Filtered Group
I'm at a loss here, so any help will me much appreciated. I will do my best to explain, but if you need additional information, please let me know:
I have a very large dataset of patient data. Specifically for the numbers I need, I have a patient number field, a county field, a 1 or 0 for LastYear field, and a 1 or 0 for CurrentYear field.
Example:
PtNo County PY CY
45676 Scott 0 1
45322 Cape 1 0
47686 North 0 1
The thing I am shooting for on my report is, "Volume growth in 3 counties (+20 cases)."
I created a group and grouped by County (group name County) and I included a group filter to only include "total cases of CY" are greater than "total cases of PY" to narrow my data to only counties that had a higher current year sum
than previous year sum.
Example:
County PY CY Difference
Scott 141 143 2
Cape 90 98 8
North 78 88 10
All is working well, except I don't need to see the Counties themselves, I just need the 3 counties and a difference of 20.
I explored online and found tutorials that said to right click on the field and select "Add Total" but this total did not have my filter in it and gave me everyone. I also tried adding a row outside the group and used the RunningValue function
(i.e. RunningValue(Fields!FYTD_Current_Year.Value, Sum, "County")) but it gave me a message that states "The Value expression for the text box 'Textbox456' has a scope parameter that is not valid for an aggregate function. The scope
parameter must be set to a string constant that is equal to either the name of a containing data region or the name of a dataset."
When I move the row with the RunningValue function inside the group, it runs but I get the same information repeated twice for each county with no final total.
So I am not sure how to go about getting my values I need for my report. Anybody know how to resolve this?
Thanks,
Cyndi
cpemtp1Hi Cyndi,
Based on my understanding, you specify a filter condition in group properties. Then you want to sum the filtered values for each field.
In this scenario, we need to specify a filter condition on group level. If we use sum() function out of group, the expression will calculate the total values on dataset level instead of group level. So we can’t simply use expression to achieve this goal.
However, we can use custom code to record the filtered values for each field, then we can calculate the total based on these values. Please refer to the steps and screenshots below:
1. Add the custom code below into the report:
Public Shared Value1 as Integer=0
Public Shared Function GetValue1(Item as Integer) as Integer
value1= value1 + Item
return Item
End Function
Public Shared Function GetTotal1()
return value1
End Function
Public Shared Value2 as Integer=0
Public Shared Function GetValue2(Item as Integer) as Integer
value2= value2 + Item
return Item
End Function
Public Shared Function GetTotal2()
return value2
End Function
2. Design the tablix like below:
3. The result looks like below:
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu -
SSRS 2008 - Expression for totals in a Matrix
Hi,
I have a simple Matrix with the following groups:
Row Group: Program
Column Group: Employee
I need to add a new total column on the right side of the matrix using a simple calculation but I haven't been able to find how to do that other than doing it on the query side. Here's how the Matrix looks like:
Program
Employee1
Employee2
Employee3
New Column
Program1
45.0%
0.0%
87.5%
Program2
12.5%
50.0%
3.8%
Program3
28.8%
1.3%
8.7%
Program4
1.3%
23.8%
0.0%
Total
87.6%
75.1%
100.0%
The new column should display the sum of each program divided by the sum of all totals....for example for Program1 the calculation should be (45+0+87.5)/(87.6+75.1+100) which should be equal 50.44% ...the same logic applies for the other
rows.
The number of columns (Employees) and rows (Programs) are dynamic, so they change according to who is seeing the report. I'm unable to reference the sum of the total at the bottom row, not sure what I am missing.
Any input on this is greatly appreciated.Hi Cleber,
I have tested on my local environment and your issue can be caused by you haven't include the scope in the sum function, please find details information below about how to do the calculation:
Please design the matrix like below:
You can find the Row Group name is "Program" and the Column Group name is "Empolyee", this will include in the sum expression as below:
Expression1： =SUM(Fields!Amount.Value,"Empolyee")
Expression2： =SUM(Fields!Amount.Value,"Program")
Expression2： =Sum(Fields!Amount.Value,"Program")/Sum(Fields!Amount.Value,"DataSet1")
Preview you will got the result like below:
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support -
I really would like to know how to totally remove Yahoo toolbar from my Firefox browser as well as my computer. I don't like special toolbars at all. I find it irritating that you included one in the newest version of your browser. In the future I would hope you would leave this or any other out. Firefox used to be my favorite browser to use, now I am not going to want to use it because of the extra toolbar. Please tell me there is a way to remove this, not just hide it.
You can't move the Yahoo Toolbar from IE to Firefox, they are totally different "behind the scenes". However you can install it, [http://us.toolbar.yahoo.com/ http://us.toolbar.yahoo.com/] and I believe if you log in with your Yahoo account it will sync your data.
-
Totally unresponsive and unrecognized by iTunes brand new iPod Touch 3rd gen
Within less than 24 hrs of setting up brand new 3rd gen iPod touch it is totally unresponsive. While using it, the screen went black, felt a little warmer than normal, and now won't do anything. I've tried resetting by pressing on/off and home buttons. Tried this even after plugging in to computer for 20+ min and still nothing. iTunes no longer recognizes it, so I cannot restore it. I am just stuck with a black screen with absolutely no response. I'm at a loss on what to do next or what might be wrong. Have been all over this site for a solution, but just can't seem to find one that helps me. Apple Stores are 3 hrs away from where I live. Very careful with the device, not dropped, not wet, just simply using it. Any help greatly appreciated... my son is devistated.
See if placing the iPod in Recovery Mode will allow iTunes to see the iPod so you can restore via iTunes.
Next would be an appointment at the Genius Bar of an Apple store.
iOS: Not responding or does not turn on
Maybe you are looking for
-
Non operational USB ports and stuck on grey apple start up screen
Two problems 1. USB ports are non operational. I believe I fried them by accident. When hooking up an external USB hub, I may have connected an incorrect power supply. Now the USB ports on the front and back of my tower are non operational/do not wor
-
How do I find the properties of mail attachments?
Lately I've had several occasions when it would be useful for me to know the creation date of an email attachment that I received, but once I open the attachment, properties shows that it was created on the day I opened it. I tried option click, cont
-
how to unload adobe cloud
-
Save as has disappeared from my menu
Hi and good evening On my Mac Save As has disappeared from the Pages menu. Under Share the Send by email is grey ie not in bold as usual, but the formats - Word etc are in bold and when clicked on an email (new message) comes up but if I've clicked o
-
Hi SDN, In our R/3 <b>QA</b>, we Activated the Datasources (RSA5) using <b>$TMP</b> to check the data in QA (RSA3). Now If we Transport the Datasources from R/3 DEV to QA What error I will get ? How to Proceed Now ? Regards, AA D