Touch 1st gen and 2nd gen headphone jack question

Alright so my headphone jack crapped the bed and i was looking into just buying the jack and repairing it myself. Now when i look on the internet for a headphone jack, the only things i see sold are 2nd gen hp-jacks. now would this work in my first generation ipod touch? they look identical. I just want to confirm before i buy it.

the only difference between the the two jacks is the 2G has three contacts compared to just two on the 1g. I would rather replace the 1G's headphone jack with the 2G. Two contacts are for stereo left and right. The three contacts for the 2G is for stereo left and right plus mic. Then you can use your 1g to make wifi calls with Skype. I plan on doing this to my 1g as my 2G already has it from the factory which is one of the changes of the 2G from the 1G. Let me know how it goes.

Similar Messages

IPod Touch 5th gen headphone jack and battery not working properly

Yesterday my iPod touch 5th gen's battery started draning at an incredible rate. Won't last longer then 1 or 2 hours now. And add onto it the headphone jack stopped working properly. It's now only plays in one ear, it's all static over the sound it's supposed to play. I baby my iPod. This all happened out of the blue. What do I do to fix it?

Saraa22 , the same recommendation was given over a year earlier:
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Saraa22 wrote:
If anyone has this same problem with their Ipod touch 5g headphone jack. I found a way to fix it. I did everything of the above but nothing actually worked . But this is what worked!
First reset your Ipod by pressing down the on/off button and the home button at the same time for 10 seconds until you see the apple icon
Then after it turns back on : Go to settings then press on general. Then press on accessibility and scroll down and make sure MONO AUDIO is on!
This will definitely fix the problem.

IPod touch 5th Gen Headphone Jack

I contacted the 2 points on the left side of the headphone jack on the iPod touch 5th Gen with a pin when I was probing in there. Did I short circuit anything or am i just paranoid.
Thanks

If it works fine now then likely nothing damaged.
If problems now but not before then you likely damaged it.

I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

Have you tried:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
Apple will exchange your iPod for a refurbished one for this price:
Apple - Support - iPod - Repair pricing
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

IPod Touch 1st Gen and 3.1 update DELETES volume slider

I had a perfectly working iPod Touch 1st Gen/16GB until I updated to 3.1 software. Now I do not have a volume slider.
Yes headphones are in but there is no place to adjust the volume. There is previous, next arrows and play and pause AND its centered in the rectangular area, but no volume slider.
I have restored it 3x in various ways. I have tried 5 times to downgrade the operating system but ALWAYS get an error, so it never completes. Of course the ipsw files where found using google because there isn't any links that work on Apple's site for previous iPhone software. If I try to restore to 3.1 right after that it goes through perfectly.
So it seems that Apple has locked out downgrading once you upgrade! All I want is my volume slider back. How can I get it back if 3.1 deletes it everytime and I can't go back to the previous operating system?
Thank you.

I too have had this exact same problem, except that I was running 3.0 and hadn't updated to 3.1. I put my ipod on the table overnight, after listening to it, and when I picked it up the next morning, theres no volume slider. I never even unplugged the headphones. Double clicking the home button while on the home screen would bring up the popup to skip songs, and there it says "Dock Connection" even though it not connected to a computer. Multiple reboots an no effect. I've tried different sets of headphones, to no effect. Its like the iPod isnt detecting them being plugged in. The worst part is i DO get sound in the headphones, but no volume control, and the sound level is turned really low. So the headphones ARE working.
I updated to 3.1 just now, and the problem has NOT been fixed. Theres no way anywhere in the settings to adjust the volume. Theres only a limit slider, so I have no way to turn up the volume loud enough to actually HEAR things.

Ipod touch 1st gen is frozen, all I see is Apple logo for 10 secs and then screen goes black. What's wrong with it?

My ipod touch (1st gen) is frozen and does not respond. All I can see is the Apple logo for around 10 seconds and then screen returns to black. What is wrong?

Did you already try to connect in recovery mode and restore? iPhone and iPod touch: Unable to restore

My ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend

my ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend

I have not seen a solution for error (1)
make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Ipod touch(1st gen) stuck in recovery mode and cannot restore??

I just bought a used ipod touch 1st gen. It was fully functional before I wiped it. I wanted to remove all of the other person's music and personal info before I started using it. I also wanted to update ios. I wiped it and when it restarted it was in recovery mode. I have tried to restore it and I keep getting an error message that it could not restore unknown error has occurred (1). I have tried troubleshooting and going through all of the steps that Apple suggests and nothing has worked. Any suggestions? I just want it restored and updated to the latest ios that will work with it (3.1.1 I believe) I don't know what to do at this point.

ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have ipod touch 1st gen and its on but frozen

I have a ipod touch 1st gen and its powered on but is frozen any help?

Hold the lock and home button for 15 to 30 seconds. You should see the apple logo and it should start up to the lock screen. Thanks please like

HT2052 After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life

After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life easy

See if placing the iPod in DFU mode will allow a restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

IPod Touch 1st gen to iTunes connecting speed

I'm an iPod Touch 1st gen newbie on iOS 3.1.3; My question is when connecting the iPod to iTunes 10.1.1 how long does it normally take for the device to show up? When connecting an iTouch that's OFF (connection turns it on), I find it probably takes 5-8 minutes for the device to show up. I'm left sitting there not sure if I need to do something. Should the device be ON? When using my iPod Nano (2nd gen) it shows up on iTunes very fast and I see the device on the Desktop. iTouch doesn't show up on the Desktop as a connected device even though Finder options is checked on so iPods are recognized. Otherwise, all is well and great with the device. Thanks.

iPod touches and iPhones are not recognized as disk drives and therefore will not appear on the Desktop. I would say that 5-8 minutes to be recognized by iTunes is not normal, however.
You might want to focus your efforts on your Mac. I would check/repair permissions on the HD, remove all earlier instances of iTunes, make sure you are running the latest version of OS X that you can (I think 10.5.8 is the latest you can use). You might have to uninstall iTunes and download/reinstall. The correct way to do that is in http://support.apple.com/kb/HT1224

My ipod touch 1st gen says its connected to wifi, but when i go on safari it stops at "connecting" with a grey screen, what should i do, my router is fine, cause my brothers iphone 4th gen works, but my ipod touch 1st gen dosen't?

yes, so i connect to my wifi at home, my brothers iphone works fine, but my ipod touch 1st gen dosent conect. it connects but when i go on safari it dosent work, it says" connecting" with the circle loading thing. plz help< o and my router is fine because my brothers iphone works great, ive tried restoring and reseting networks, and ive also tried forgetting the network, my ipod touch 1st gen is out of its warranty, so what can i do?

Try restarting your router by removing power to it for 30 seconds. This may correct the problem.

IPod Touch 1st Gen Not Charging/Being Reconized

As the title says, my iPod Touch (1st Gen) will be reconized bu any computer or charge all in itself. I tried plugging it into multiple computers, nothing. I tried plugging it into the wall adapter...still nothing. It doesnt not get the charging symbol when I plug it into either places. The is actually the second time it happend. The first, well my cord was so worn, I guessed it was the cord and replaced it, worked just fine. The replacement happend very recently, like maybe 1-2 months ago. So right now, I would guess it was the cord, but its brand new. I have tried toing both a soft and hard reset of the iPod, nothing worked. If anyone could please help me, it would be highly appreciated.

- See if placing the iPod in Recovery mode will allow a restore
- Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Then make an appointment at the Genius Bar of an Apple store.

When I sync my ipod touch 1st gen, it comes up with a message that I am not authorized on this computer

When I attempt to sync my ipod touch 1st gen, it gives me a message that I am not authorized to sync on this computer and gives me my old user id. I don't use that old id and dont have access to the email address(no one does lol) and the security question is one that I would not even use. Anybody help?

Try this previous discusssion:
https://discussions.apple.com/message/12518406#12518406

Help. I can't update iPod Touch 1st gen from ios 2.1.2 to 3.1.1; already paid for it.

Hi all,
I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
Can anyone help? Please?!
Thank you!!!
P.S. We have a PC, with Windows XP Home.

Yes, I have contacted them. They are who told me to try a few of the "fixes". They actually said they had never heard of this error, or any problems relating to his download. Also, when I was talking to them, they came here to this forum to find the answer...:/ This is why I am asking here. I was hoping someone had an idea I hadn't tried already.
Thanks.

Touch 1st gen and 2nd gen headphone jack question

Similar Messages

Maybe you are looking for