Touch 2.0 & Win XP wireless & weird behavior HELP
Hello
So, I bought into all the Apple ads (& even bought Apple stock) and have signed on to the phenomenon, but I am not happy.
Apple! Listen up:
I have a new 32Gig Touch installed on a FRESH copy of Win XP (the most stable OS I have ever used, having built many systems). iPod software 1.4.XX worked seamlessly. However, since "upgrading" to 2.0 to the tune of $10 it has been VERY frustrating:
1. I cannot connect wirelessly, as others have reported. I have tried putting a "$" in front of my WEP key to no avail. PRIOR TO 2.0, I was able to connect effortlessly, so this is clearly a 2.0 problem and Apple's failure to troubleshoot this thoroughly.
2. ALSO: when the iPod Touch is communicating wirelessly (even though it doesn't connect to the internet) my PC slows to a crawl. Specifically, my mouse movement is fragmented and slow & the PC is essentially useless. I also get some sort of registry error when booting up.
3. When connected via USB and turned on (syncing) I get humming noises from the PC. Really strange.
Keep in mind this is a fresh XP install with little to no apps running. When I shut the Touch off, my PC performance increases to normal (even if the Touch is not connected).
As Apple expands its base across platforms as part of it corporate strategy, it must continue to deliver the exceptional ease of use and performance that has defined its existence. Alas, it seems that Apple has stumbled on this 2.0 release. My new MacBook arrives Tuesday. If I cannot resolve these issues, then I may just keep the MacBook sealed and return it and stick to the PC world, where I at least know how to troubleshoot these types of things.
I would appreciate ANY suggestions from other users out there. I searched the forums and tried what I could before posting.
Thanks for your help, Borderline Apple Convert
On follow up:
It seems the slow mouse and performance is related to the wireless on the Touch. Turning it off seems to resolve the problem. Furthermore, using a wired USB mouse rather than a wireless one also seems to fix the issue. I also turned off the wireless on the Touch.
As for the wireless connection, it is definitely connected. It seems to work for a second then drops. For instance, I was able to add 1 city to the weather but then it timed out when adding the second. One web page will come up and then the next one will stall.
I think I might go back to 1.1.4 or 5 and see if I can get my wireless performance back.
Any other suggestions appreciated. Thx.
Similar Messages
-
Can't connect my Ipod Touch 2nd gen to home wireless network - please help
I have just received a 2G ipod touch today and it will not connect to my home network. I have a SKY Netgear router with numerous devices wirelessly connected with WPA security. I have input the shared network key when my Ipod asks for a password but it will not connect (even if I am stood next to my router). I just get "Unable to join the network .........". I have tried connecting via the 'other' network route but still the same result. Please help.
Here's a few things you can do to get to the bottom of the problem:
- Have you ever connected to a public hotspot? The only reason I ask is this will rule out hardware problems. If you are not close to anything, download and install the free app WiFinder from the app store. Once you have the app installed, you see what networks are around you. If nothing is working, contact Apple and either visit the Genius Bar or return it Apple.
- If you have disabled encryption in your router and you are still be prompted for a password, you need to tap on that network name and tap Forget Network. And to really make sure everything is cleaned out, go to Settings > General > Reset > Reset Network settings.
- After your iPod restarts, use WiFinder to find your network. WiFinder will tell you whether or not you have encryption on or off and the type of encryption used. If it is still off, just tap the Connect button. If you have turned it back on, go to Settings > WiFi > Other network and enter your network name. You will be prompted for your encryption scheme and your password. WPA and WPA2 should have a password entered. WEP should have the hex key entered.
- If you still can't connect, I would check and reenter my password. Passwords are case sensitive.
- Assuming you have connected, tap the blue arrow (>) next to your network name. You should see your IP address, subnet mask, router IP address, and DNS router addresses, you are good to go.
- If you have an IP address of 169.x.x.x, your router is not supplying an IP address. Recommend router settings are:
SSID - on
DHCP - on
MAC filtering - off
Encryption - on and set to WPA or WPA2
DNS - automatic from ISP
Let us know what happens. -
Wireless keyboard weird behavior (useless)
Hello.
Today I cleaned up my wireless keyboard with a tissue and a little of alcohol but after I cleaned the keyboard starts to have a weird behavior: The keys are not working, other keys are like stuck and depressed and other just does not respond.
The keyboard is useless like that.
I will let it dry well until tomorrow to see if it works. The batteries are new.
Any help will be very useful.
Thank you.If alcohol got inside the keyboard you may have ruined it however only time will tell. If it does going forward it's OK to use isopropyl alcohol however put it on a rag or cotton ball and use that to rub the keyboard clean.
Roger -
My macbook had a weird behavior on the display, now it won't go further than gray loading screen with the apple logo. It's a macbook pro early 2011. I've read that those are having issues, if there's someone i can contact for further information, report the issue since it's getting common or any temporal solution available. Thanks
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I have a first generation ipod touch. I use a wireless router to get my internet connection. It is frozen on opening up a website and will not release. Even when I power down and restart it goes back to the same failed connection. Any ideas greatly appreciated. Ray.
- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and delete cookies, cach and history.
- Restore the iPod -
Weird behavior in master-detail
Dear Forum,
I need to implement an application but I still have a halting error.
I have this strange problem and I'll try to explain.
I have this masterscreen with search functionality. When I do a search, I get a result. When I now enter the details screen of the second row of the search result and I change the fields on the details screen and do a commit, I get the message that the changes were made successfully, but I see the primary key jump to the value of the primary key from the details of the first row of the search results on the masterscreen.
And when I look at the details of the first row, the changes were made in this details, and NOT in the details in which I needed to make the changes.
And now more weird... I can only reproduce the problem in Internet Explorer and whatever I try, it works correct in Firefox.
So the functionality should work as supposed, as it wouldn't work in Firefox.
Has anyone encountered this problem before or does anyone has a solution or tip to get to the solution?
Your help is much appreciated.
ArjenSteven,
When I tried to create the logs you requested, I ran up to a different problem, also affecting this behavior. When I repaired this, still the weird behavior took place in Internet Explorer. And in Firefox the problem was solved. So I tried to disable the cache in Internet Explorer. This solved the problem there as well..
So this behavior doesn't happen anymore with the cache disabled, thus solved this problem.
Thanks for the effort anyway.
Arjen -
Weird behavior in Classic or not?
It has been a long time since I've needed to use Classic (on 10.4.something) Today I needed to do something that could only be done in classic. I thought I saw some weird behavior so I tried a couple of other classic apps. All started Classic just fine, brought up their document window and menu bar. But there was no classic desktop under the app's window and while the menu bar showed "finder" as an open application that could be switched to (the right-most menu item) but when I switched to it I got the OS X finder, not a OS 9 one. Occasionally I can get what looks like a Finder menu bar, but that's on it are the Apple and Help and the app switcher.
Recently I've been playing with Sheepshaver on a Snow Leopard system, which brings up an honest-to-goodness OS 9 desktop.
Now, I am misremembering how Classic works (in effect, no desktop and no finder) or is something wrong. I checked all three of my systems running Tiger and they have the same behavior. (A G4 -- that will still boot into OS 9, a powerbook G4, and a mac-mini.)
Ted Lee
Minnetonka, MNOK, I found an article on rebuilding the desktop and it indicated that while there is a file for the OS9 desktop, in the classic environment it is invisible and can only be found through an alias that is created on the OS X desktop. I suspect I've deleted that alias since I didn't have any particular need for it. The article tells you how to re-create the alias from the terminal. indeed there is a folder there and it is empty. No particular use for it -- if you select Desktop from an OS 9 app you get the OS X desktop. I can also see why there's no real OS 9 finder -- anything you could have done from it you can do from the OS X finder -- except the "Apple Menu" and that's why that's under the classic icon on the right half of an OS X menu bar. There still is a "rebuild desktop" in the Classic prefs -- I assume that's so you get the right doc/app association in the classic environment, since I don't think OS X understands the classic creator/type info.
So sounds very much like I'm misremembering!
Ted Lee
Minnetonka, MN -
Weird behavior in opening Aperture images in Photoshop
I have found a lot of really weird behavior when opening Aperture images in an external editor (in my case, Photoshop, so I'll use PS to refer to it):
1) If the master image is opened in PS, a new version is created when the file is opened, not saved. So quitting PS without saving leaves you with a new version of the file, regardless of whether you actually saved any changes or not.
2) If a version (not the master) is opened in PS, a new version is not created, either on open, or on save. So in other words, changes to that version in PS when saved overwrite that version, and the previous condition of that version is lost (with respect to versioning).
3) If multiple versions of the same image are opened simultaneously in PS, there doesn't seem to be a way to tell the difference between them in PS, except for visually (possibly meta-data, but I haven't checked that, nor would I want to be forced to). The file names of all versions are exactly the same.
I'm looking for feedback from anyone out there who can explain why this isn't completely quacky version control. I've been using version control almost my entire career (as a software programmer) and here's how I have seen almost invariably version control work:
1) New versions of files are always created upon commit, i.e. saving of the file, not on opening a file. (Do not confuse this with working copies, think about what is present in the repository).
2) Opening / editing any file version is never destructive. Any change to that file version that is saved (committed) results in a new version, not an overwrite to the same version.
Aperture's interface basically has combined what traditional version management has represented separately, that being the client and repository views of a project. They are showing all versions of a file simultaneously. This is fine, but I'm really not liking the fact that some changes create new versions, other changes overwrite versions, and one case, merely opening the file creates a new version, whether there are any changes saved or not. In addition, when working with multiple versions in the editor, the file name and/or interface doesn't give any indication of what version you are working with. Easy to say that's the fault of the external editor, but I disagree -- all external editors are going to work with filenames, so Aperture should produce a unique namespace for any file version so that any external tool will be able to distinguish (visually) one file from another.
Is this completely wacky version management, or is it just me?
Brad
Powerbook G4-1.33GHz-17" / Powermac G4-1.4GHz Mac OS X (10.4.2) PB: 1GB RAM, Radeon 9600-64MB / PM: 1.25GB RAM, Radeon 9000Pro-128MBHi Bradley,
Due to the way I personally use Photoshop, I want Aperture to behave as it does.
That's because, with Photoshop, I use layers extensively. Any edits I do (levels, curves, saturation, sharpening) I do on layers. I can delete the layers at any time (or select to show or hide them). Because of this, I actually WANT Aperture to behave the way it does. Once I've done a bunch of edits in Photoshop, if I select again to edit that file in the external editor, I want to work on that specific file (to add another layer, or change one). I don't want another duplicate. I tinkered with this over the weekend, and it worked very nicely for me.
Perhaps you work differently from within Photoshop? Do you ever use layers? If I were to have a bunch of Photoshop "versions," each with 5 layers, I'd have like 5 GB of "versions" for my original 8 MB RAW file, due to the size of PSD files. Yuck -
Weird behavior in UCCX 7.0.1 SR05
Hi team,
I've got a weird behavior in a UCCX 7.01 SR05 installation.
All incomming calls which go to an agent who is set "ready" set the agent to state "not ready" and go to queue...
This behavior also occurs with standard script icd.aef.
Had anybody has same behavior in an UCCX 7 installation? Or can anybody help me? I checked my configuration twise and couldn't find
any issue.
Thanks a lot,
TobiasI've seen this happen before because of a CUCM configuration issue. Check whether the CUCM Calling Search Space for the UCCX CTI ports can call the partition of the agent's extension. My guess is that the call attempts to connect but CUCM will not allow it to go through. UCCX then marks the agent as "Not Ready" and drops the call back in queue.
-
My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not working. I have two older imacs and a wii that connect to the router. Any thoughts? Thanks
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Setting>:General>Reset>Reset Network Settings.
- iOS: Troubleshooting Wi-Fi networks and connections -
TLF 2/2.1/3 Weird behavior with floating graphics?
Hi guys,
I'm working on a chat application running on RED5 / AS3 and I'm struggling to get my client "UI" working perfectly.
My problem is related to the TL Framework, on every version available.
Basicly, I want to display a picture ( for user messages ) and icons ( for notifications ) on the left side of my lines, like this :
So, I'v been messing around with "float=start", "float=left" and such, but i'm always encountering weird behaviors whenever I scroll or resize my containerController. It's quite easy to reproduce with the following code :
public class Main extends Sprite
private var controller:ContainerController;
public function Main():void
if (stage) init();
else addEventListener(Event.ADDED_TO_STAGE, init);
private function init(e:Event = null):void
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;
removeEventListener(Event.ADDED_TO_STAGE, init);
var holder:Sprite = new Sprite();
addChild( holder );
var tFlow:TextFlow = new TextFlow();
for ( var i:int = 0; i < 50; i++ )
tFlow.addChild( createLine() );
controller = new ContainerController( holder, 400, stage.stageHeight );
tFlow.flowComposer.addController( controller );
tFlow.flowComposer.updateAllControllers();
stage.addEventListener( Event.RESIZE, resizeController );
private function resizeController( e:Event ):void
controller.setCompositionSize( 400, stage.stageHeight );
controller.textFlow.flowComposer.updateAllControllers();
public function createLine( ):DivElement
var d:DivElement;
var p:ParagraphElement;
var im:InlineGraphicElement = new InlineGraphicElement();
im.source = new Bitmap( new BitmapData( 16, 16, true, 0x30FF0000 ) ); // 0x30 Alpha
im.float = "left";
d = new DivElement();
d.clearFloats = "both";
p = new ParagraphElement();
d.addChild( p );
p.addChild( im );
return d;
Basicly, I'm stacking 50 transparent "floating" elements. It works fine most of time, but if I randomly resize my Flash Player Window, I can get the first "invisible" element to overlap the last "visible" :
It seems to be happening right when the last "floating" element should disappear. Instead, it gets "over" the previous one. It happens upon container resize and scrolls. I'v encountered this issue on lastest 2, 2.1 and 3 TLF builds.
Beside the visual "bug", it also screws up my container.getContentBounds().height calls - which can make scrolling "trembling", as the height gets reajusted.
I'm running out of ideas about how to handle this. This bug appears whenever I use "floating" graphics and I can't think of any other way to display graphics on the left side of my chat-lines.
Maybe someone ran into this very problem and figured out a way to make it work?
Excuse my english, thanks in advance,
Lionel.Thank you for your report. And I have found the root cause.
In BaseCompose.as
protected function composeFloat(elem:InlineGraphicElement, afterLine:Boolean):Boolean
if (!floatFits && (_curParcel.fitAny || _curParcel.fitsInHeight(totalDepth, int(logicalFloatHeight))) && (!_curLine || _curLine.absoluteStart == floatPosition || afterLine))
floatFits = true;
The condition of if is true, only when the weird behavior happens. We need to discuss about how to fix it. -
URGENT Please help with weird behavior of test suite
Hi All,
I have a composite involving three operations of two different services. The weird behavior comes by the time on which I run the test suite on the EM, if I try to emulate two different operation response from one service, by the time that the flow, tries to emulate the second one, I always receive this error:
part name="summary">
<summary>oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.</summary>
</part>
On the other hand if I emulate two responses of the same operation it works.
Does any one have any idea of how to deal with this kind of test? Which seems a very simple test.
Best regards,Hi thanks for your response, in detail my problem is as follows:
1- I have a simple composite with two services and three invokes, all of the operations are two ways operations. Here´s the BPEL (Service1 Demandas, operation Actualizar; Service 2 Aviso, operations buscar, actualizar):
<scope name="SINAUT_Aviso_SRV_Demandas_Actualizar">
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:pattern patternName="bpelx:automated"/>
<bpelx:analysis>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:50 AM</bpelx:property>
<bpelx:property name="BusinessId">Scope_151babe7-bc1e-11df-3ca0-0015c5fce8ce</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<sequence>
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:analysis>
<bpelx:property name="BusinessId">Sequence_151babe7-bc1e-11df-3ca0-0015c5fce8ce</bpelx:property>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:50 AM</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<assign name="Assign_1">
<copy>
<from variable="inputVariable"
query="/client:process/client:input/idDemada"
part="payload"/>
<to variable="Invoke_2_actualizar_InputVariable"
part="payload" query="/payload/demanda/idDemanda"/>
</copy>
<copy>
<from variable="inputVariable"
query="/client:process/client:input/estadoDemanda/codigo"
part="payload"/>
<to variable="Invoke_2_actualizar_InputVariable"
part="payload"
query="/payload/demanda/estadoDemanda/codigo"/>
</copy>
</assign>
<invoke name="Invoke_2"
inputVariable="Invoke_2_actualizar_InputVariable"
outputVariable="Invoke_2_actualizar_OutputVariable"
partnerLink="SRV_Demandas"
portType="ns2:SINAUT_Aviso_SRV_Demandas"
operation="actualizar"/>
</sequence>
</scope>
<scope name="SINAUT_Aviso_SRV_Avisos_Actualizar">
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:pattern patternName="bpelx:automated"/>
<bpelx:analysis>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:57 AM</bpelx:property>
<bpelx:property name="BusinessId">Scope_c235386b-bc1f-11df-3ca0-0015c5fce8ce</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<sequence>
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:analysis>
<bpelx:property name="BusinessId">Sequence_c235386b-bc1f-11df-3ca0-0015c5fce8ce</bpelx:property>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:57 AM</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<assign name="Assign_2">
<copy>
<from variable="inputVariable"
query="/client:process/client:input/ReferenciaPly"
part="payload"/>
<to variable="Invoke_1_actualizar_InputVariable"
part="payload" query="/payload/aviso/referenciaPlyAviso"/>
</copy>
<copy>
<from variable="inputVariable"
query="/client:process/client:input/estadoAviso/codigo"
part="payload"/>
<to variable="Invoke_1_actualizar_InputVariable"
part="payload" query="/payload/aviso/estadoAviso/codigo"/>
</copy>
</assign>
<invoke name="Invoke_1"
inputVariable="Invoke_1_buscar_InputVariable_1"
outputVariable="Invoke_1_buscar_OutputVariable_1"
partnerLink="SRV_Aviso"
portType="ns1:SINAUT_Aviso_SRV_Avisos"
operation="buscar"/>
<assign name="Assign_4">
<copy>
<from expression="'12345'"/>
<to variable="Invoke_3_actualizar_InputVariable"
part="payload" query="/payload/aviso/referenciaPlyAviso"/>
</copy>
</assign>
<invoke name="Invoke_3"
inputVariable="Invoke_3_actualizar_InputVariable"
outputVariable="Invoke_3_actualizar_OutputVariable_1"
partnerLink="SRV_Aviso"
portType="ns1:SINAUT_Aviso_SRV_Avisos"
operation="actualizar"/>
</sequence>
</scope>
2- My test suite is as follows:
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Demandas" operation="actualizar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<content>
<payload xmlns=""/>
</content>
</part>
</message>
</emulate>
</wireActions>
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Aviso" operation="buscar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<filePath>prueba_busqueda.xml</filePath>
</part>
</message>
</emulate>
</wireActions>
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Aviso" operation="actualizar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<filePath>prueba_actualizar.xml</filePath>
</part>
</message>
</emulate>
</wireActions>
3- When the test suite executes the second operation of the second service it throws this exception:
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.</summary></part><part name="detail"><detail>Can only write attribute within a tag.</detail></part></remoteFault></bpelFault>
4- if I change the second operation with the first one(buscar), it doesn't throws any exception.
5- If this is a limitation , how can I test a composite that involves n operations of the same service?
Kind regards and thanks for all of your support -
Hi Guru's
I am observing very weird behavior in one of the process chain at APD step.APD step is getting failed due to lack of logs and due to this chain status is changed to failure in work-load automation screen.But without my intervention this step finishes successfully by getting logs after few minutes.Now we have to change chain status to success in WLA to run further dependent loads.Could anybody help me out in this aspect to avoid unnecessary change in its status and how it is picking up logs.
Thanks!!!
KuldeepLogs not found --> Could it be due to table space issue? Did you have a look at the parameters? Is there a short dump in ST22? Ideal solution would be to fix the logs not found issue. We can also think about work arounds to restart the process chain automatically after the APD finishes successfully. But may be you can work with your basis team to see if it is table space related issue.
-
1st gen Touch w/3.0 now wireless is intermittant
Hello all,
A side note. I've actually been on these discussion boards for years however today when I logged on to Apple Discussions a message said that my former name and info had been deleted "due to security reasons". I have no idea what the problem was as I never was informed by Apple. So I now start over with a new alias and avatar.
Anyway...
I have had a generation one Touch for over a year and wireless has always worked well...albeit a bit slow at times. I paid for and downloaded v. 3.0 and all was fine, including my enjoyment of the additional 3.0 features.
About three weeks ago I began having intermittant problems with connecting to my wireless network. We had some bad weather locally and I thought it might have been related. Then all seemed well again until the past week, which connection to my wireless network has been intermittant at best. Yesterday it would not work at all. Tried all the typical 'fixes', restarting wireless router and Touch, etc. Touch would not accept my wireless password yesterday at all. Very frustrating. I turned it off for the day and night. Today I turned it on and it is working.
Is this a problem with 3.0? If so has Apple attempted to fix the problem? How do we notify Apple of these issues? Thanks.There have been more than the usual problems with 3.0 and WiFi. There are certain iPods that seem to be "broken" by the update. Problems like you experienced seem to be rather common, however most get corrected with a network reset on the touch and logging back into the network.
I'm sure Apple was sent enough bug reports on 3.0 and WiFi. They did issue a couple of new technical documents. Supposedly version 3.1 will bring some relief. It is out in test now.
If you want to file a bug report, you can do it at http://www.apple.com/feedback/ipodtouch.html -
i have created an anotation linst subvia which gets me out 1d array of 4 elements each representing a cursor to be seen on an xy graph at a later stage on the program.
now on the stage where the xy graph becomes visible, the 4 cursors appear in it, but the cursor legen is blank.
now if i double click on the cursor legent and click properties and then click cursor, i see all 4 coursors present. if i then delet ny of them, then on the xy graph;s cursor legent appear 3 cursos (name positions etc).
pretty weird behavior in my opinion.
any ideas about what to do at this point.first of all thanks for replaying to the post.
here are some .jpeg files to show the observation.
i also wrote on them to make it easier for you.
regards,
Attachments:
PIC_1.JPG 78 KB
PIC_2.JPG 193 KB
PIC_3.JPG 54 KB
Maybe you are looking for
-
I have a macbook pro that I want to give to my son for school. I just purchased a newer (used) macbook pro with more HD and memory to replace the one I use for work. I need to set up the new book and transfer all my stuff over, then clean the olde
-
What are the icons that appear on the desktop when I download a program?
OK, new to the Mac so please be gentle with me! I've downloaded some programs on my Macbook Pro. The .dmg file appears and I click on it to install the program. However, there is an icon placed on the desktop for the program, as well as it appearin
-
Media Center Deluxe III problem...
hi there... i have a megaPC (mega 865) and i have a problem when i want to see dvd's in Media Center Deluxe III. the image is always stoping, but if i try to use WinDVD our PowerDVD it work real good and the image don´t stop. does anyone here have t
-
Bought used Macbook, how to update iPhoto?
All, I bought a used Macbook about a year ago and have loaded my entire photo library onto it. When in the appstore, i noticed iPhoto had updates available, and when i go to update it, it's trying to use the old owners Apple ID - and the user id is
-
Unable to connect to yahoo messenger when on 3G Mode
Could somebody help me pls, i've got an iphone4 and i've downloaded the yahoo messenger application few times but everytime im on 3G i could not log in to my yahoo messenger.It just keep saying "unable to log-in right now".Since i bought this iphone4