Touch 2G not saving runs
Hi,
This has happended the last two times I have been running now. I've been for a run and then at the end of my run clicked on "end workout" as soon as I do this instead of the summary of my workout I just get the first page of the nike+ app asking what type of workout I want to do. In the history there is not evidence of my run and the run has effectively dissapeared.
Has anyone else experienced this or is there a limit to how many runs you can have stored on the iPod (I have the 1st 5 runs I did and they are all there as expected).
I've been having this issue on my tocuh 2G with 3.0 software.
The one thing I have noticed is that it only happens when I also have a 3rd party (Jaybird) bluetooth dongle attached to the dock connector.
Hitting the Pause or end workout button on the nike app hangs the ipod. It takes almost an hour before it will let me reboot it.
I don't have the iPod in Landscape mode, only in portait. It is just laying on the treadmill shelf.
Message was edited by: mhsimkin
Similar Messages
-
Cisco LMS netconfig job not saving running config to startup
Hi,
I'm running LMS3.2 and RME 4.3.1. I deployed a netconfig job to our network which consisted of approximately 800 devices.
The report said that the job completed successfully however some of the devices didn't save thier running config to startup. Has anyone experienced this before?
Is it possible to add a command or issue another netconfig job just to save the running config, so I can identify if the job fails on some devices? Using the tick box in the netconfig job doesn't seem to alert you if its not successful.
Thanks,I have seen in the past where someone is running a netconfig job with the cmd to "wr mem" as a line in the netconfig job.
Sven is correct, there is an option; radio button/check box to save the running config to startup after the job is completed.
if your job is strictly meant to "wr mem/write the config" then run a show command in config mode (non-enable) mode and select the option to save running config after job is completed. -
I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
Help!If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be. -
'Touch does not have proper permission to run.'
I downloaded the app 'touch' but it will not open. I have tried uninstalling it and reinstalling it but when I click on it, it still will not open. Whenever I restart my phone the first message that pops up is 'Touch does not have proper permission to run.' I have no clue how to solve this problem please help!
Hi LucyAnnDey
Welcome to BlackBerry Support Forums
After Installing that application have you allowed permission to that app ?
Refer to this KB Article and modify the permission for that app and set it to allow :
KB29104 : How to modify application permissions on a BlackBerry smartphone
Good luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
Safari (7.0.6) on my iMac running Mavericks (10.9.4) is not saving web pages (web archives)
Hi. Not familiar with forums but hope to get some help.
Safari (7.0.6) on my iMac running Mavericks (10.9.4) is not saving web pages (web archives).
I've used the following path:
File > Save As >then Format > Web Archive
It saves a file but when I click on its icon it opens up to the 'Top Sites' page (as when you click on the + for a new tab) not a saved web archive of the web page I was on.
I have no such problem with Safari on my MacBook Pro running Lion.
The iMac hardware details are: 2.7 Gz Intel Core i5 with 8 gb of RAM . The software update tells me I'm up to date.
Any help would be much appreciated. Thanks in advance.
Errol.It could be malware that's causing the archive / Top Sites problem.
Download and run the adware removal tool here > The Safe Mac » Adware Removal Guide
Easy, safe, and only takes a minute or two.
If no malware is found ...
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall. -
SQL Profiler running trace - where do the rows go if not saved to file
When SQL Profiler trace is running, there are thousands of rows generated and shown in the trace window. Since I am only looking for deadlocks, I am not saving them. Are they just discarded, else where do all those rows go? I really don't want to fill
up the log file.From your description, it seems you are running Profiler while saving events to a file. All of the displayed events are also written to the file. If you don't need events other than deadlocks, you should not include those in the trace to begin
with.
Be aware that a Profiler trace can significantly degrade server performance when many events are captured. If you must capture a large number of events (or run a trace continuously), I suggest a server-side trace (or Extended Events file target)
instead. This will allow SQL Server to stream data directly to the trace file without the Profiler tool overhead. You can script the Profiler trace for server-side tracing from the Profiler File-->Export menu. Save and customize the
script (file name, max file size, etc.). You can view the trace file(s) using Profiler or fn_trace_gettable.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com -
IPod Touch is not showing up in My Computer
I realize that there are several other topics that talk about this problem, but so far none have really helped me. My goal is to have my iPod Touch be recognized as a camera so I can upload all my photos from my Saved Photos to my computer and finally clear up some much needed space on it. Please don't refer me to software that will allow me to move photos from my iTouch to my PC because either they are all only trial versions or they don't allow me to access the images from my Saved Photos album.
Currently my iPod Touch does not show up in My Computer. I'm running Windows XP. Checking my Device Manager for the driver, the only driver that comes up that relates to my iPod is called Apple Mobile Device USB Driver. I've tried uninstalling and reinstalling that driver (and one I was able to get the iPod to show up in My Computer as a camera but when I clicked on it, it said that there were no pictures in the device [and I clearly do], and after uninstalling the driver again and reinstalling it the icon went away). I've read that maybe uninstalling iTunes and then reinstalling it might fix my problem, but I'm weary to uninstall it for fear that I might loose all my applications that I've synced into iTunes as well as my purchases and all the movies and things I've downloaded.
If anyone has any comments, suggestions, or further questions about my problem, PLEASE say so because this is very urgent and I need all the help I can get.Also, I forgot to add that my iTouch is a 1st Gen I believe (I'm sorry, I got it for a Christmas gift, but I'm pretty sure it's a 1st Gen).
-
Unable to unlock phone -- How to backup photos when touch is not working
Hello Experts,
My HTC 8X running windows phone 8.1 update (dev Preview) had some password unlock attempts in my pocket and now its currently on the screen where its asking me to enter A1B2C3 to try to enter the password again.
My problem is that the left side of the touch screen is not responding so i am unable to type 'A1'
Is there ANY way I can unlock my phone and take a backup of the pictures on it.
I don't want to reset my phone as I have very important pics on it and I didn't turn on the auto upload feature of pictures to OneDrive.
Please help as I really cannot reset my phone and delete the pictures.
Please note that the phone is getting detected on the computer but I am unable to see the storage to do a backup.
Thanks in advance
Digvijay
Thanks, Digvijay NathHi everybody.
I have the same issue on a Nokia Lumia 925. Yesterday the screen stopped working, due to an accident. The phone is locked with a NIP so I cannot unlock it and when I connect it to the PC I cannot see its data, which is not saved on OneDrive by the way. The
Windows Phone App on Windows 8 asks me to unlock the phone to see its content, but I cannot do that since the screen is broken, and the Windows Explorer on Windows 8 (and XP also) recognizes the phone correctly but cannot display any of the files on it. It
says the device is empty.
I understand that I need to send my phone to have its screen replaced or fixed, but I sure do not want to delete its files, and would like to backup them before I send away my phone, specially the pics and videos. Maybe on these months you have come up with
a way to do that I guess?
Thanks in advance, regards. -
HP Officejet Pro 8600 N911a - Print when Fax is Not Saved
Can I make it so a fax is printed when it's not saved? I know I can set it to print and save every time, but I rely on HP Digital Fax to save paper. If a fax is not saved, either due to a network error or if the computer that it usually saves to is shut off, can the fax just be printed?
, it's nice to meet you. I think I found something that may help with your faxing dilemma. This information was in the User Guide for the Officejet Pro 8600 e-All-in-One Printer - N911a; pg 69. Set up backup fax Depending on your preference and security requirements, you can set up the printer to store all the faxes it receives, only the faxes it receives while the printer is in an error condition, or none of the faxes it receives. The following backup fax modes are available:On > The default setting. When Backup fax is On, the printer stores all received faxes in memory. This enables you to reprint up to eight of the most recently printed faxes if they are still saved in memory. NOTE: When printer memory is low, it overwrites the oldest, printed faxes as it receives new faxes. If the memory becomes full of unprinted faxes, the printer stops answering incoming fax calls. NOTE: If you receive a fax that is too large, such as a very detailed color photo, it might not be stored in memory due to memory limitations.
On Error Only > Causes the printer to store faxes in memory only if an error condition exists that prevents the printer from printing the faxes (for example, if the printer runs out of paper). The printer continues to store incoming faxes as long as there is memory available. (If the memory becomes full, the printer stops answering incoming fax calls.) When the error condition is resolved, the faxes stored in memory print automatically, and then they are deleted from memory.
Off > Faxes are never stored in memory. For example, you might want to turn off Backup fax for security purposes. If an error condition occurs that prevents the printer from printing (for example, the printer runs out of paper), the printer stops answering incoming fax calls. NOTE: If backup fax is enabled and you turn the printer off, all faxes stored in memory are deleted, including any unprinted faxes that you might have received while the printer was in an error condition. You must contact the senders to ask them to resend any unprinted faxes. For a list of the faxes you have received, print the Fax Log. The Fax Log is not deleted when the printer is turned off. To set backup fax from the printer control panel 1. Touch (right arrow), and then select Setup.2. Touch Fax Setup, and then select Advanced Fax Setup.3. Touch Backup Fax Reception.4. Touch On, On Error Only, or Off. Reprint received faxes from memoryIf you set the Backup fax mode to On, the received faxes are stored in memory, whether the printer has an error condition or not. NOTE: After the memory becomes full, the oldest, printed faxes are overwritten as new faxes are received. If all the stored faxes are unprinted, the printer does not receive any fax calls until you print or delete the faxes from memory. You might also want to delete the faxes in memory for security or privacy purposes. Depending on the sizes of the faxes in memory, you can reprint up to eight of the most recently printed faxes, if they are still in memory. For example, you might need to reprint your faxes if you lost the copy of your last printout. To reprint faxes in memory from the printer control panel 1. Make sure you have paper loaded in the main tray.2. Touch (right arrow), and then select Setup.3. Touch Tools or Fax Tools, and then select Reprint Faxes in Memory. The faxes are printed in the reverse order from which they were received with the most recently received fax printed first, and so on.4. If you want to stop reprinting the faxes in memory, touch the Cancel button. Please let me know if these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks, -
Image is not saved in jpeg/bmp file but ok with png
Hi i am unable to save the image in disk in jpeg format.
Here is the code.
public void saveImage(){
//if no filechooser is there means no image file opened.
if(fileChooser==null){
if(errorWindow==null)
errorWindow=new ErrorWindow(XXX.getPrimaryStage());
errorWindow.showErrorWindow("There is no image to save !!\n");
else{
fileChooser.setTitle("Save The Image");
File saveFile=fileChooser.showSaveDialog(XXX.getPrimaryStage());
if(saveFile!=null){
System.out.println("saveFile path= "+saveFile);
//get the extension of output image to be saved.
//XXX: is the main class name(say)
outExtension=*XXX*.getImageExtension(saveFile);
//if user does not give extension: set default extension as jpg
if(outExtension.equalsIgnoreCase(saveFile.getName())){
outExtension="jpg";
String newPath=(saveFile.toString())+".jpg";
saveFile=new File(newPath);
Task task = new Task<Void>() {
@Override
public Void call() {
Platform.runLater(
new Runnable() {
public void run() {
try {
//The image is inside ImageView->inside ScrollPane-> inside TabPane.
Image curImage=XXX.getCurrentImage();
int width=(int)curImage.getWidth();
int height=(int)curImage.getHeight();
System.out.println("cur image width= "+width+" ht= "+height);
bufferedImage=new BufferedImage(width, height,BufferedImage.TYPE_INT_ARGB );
//set the current image to awt Buffered Image
SwingFXUtils.fromFXImage(curImage, bufferedImage);
imageTabPane=xxx.getImageTabPane();
Tab tab=imageTabPane.getSelectionModel().getSelectedItem();
TabPane childTabPane=(TabPane)tab.getContent();
ScrollPane sp=(ScrollPane)childTabPane.getSelectionModel().getSelectedItem().getContent();
final ImageView imageView=(ImageView)sp.getContent();
WritableImage wim = new WritableImage(width,height);
imageView.snapshot(null, wim);
System.out.println(" snapShot width= "+wim.getWidth()+" ht="+wim.getHeight());
*ImageIO.write(SwingFXUtils.fromFXImage(wim,null), outExtension, saveFile);*
//<------ its not working for png,jpeg,bmp,gif
// the below lines are working only for png and gif
OutputStream out = new FileOutputStream(saveFile);
ImageIO.write((RenderedImage) bufferedImage, outExtension, out);
out.flush();
} catch (Exception ex) {
Logger.getLogger(FileMenuController.class.getName()).log(Level.SEVERE, null, ex);
//ex.printStackTrace();
System.out.println("finished");
return null;
Thread th = new Thread(task);
th.start();
}else{
System.out.println("File is not saved");
}//saveImageNote: The above code is executed in ubuntu(10.04) using Netbeans 7.2(Javafx(2.2), java(1.7.0_11).
When i run(from terminal) separately in a new class with an image in an Imageview( inside a Vbox) and take the snapshot
of the imageview and write into the file using ImageIO.write(SwingFXUtils.fromFXImage(wim,null), outExtension, saveFile);
with any extension (jpeg,png etc) it is working fine.
Please help me.
Any small hint is also helpful.Please feel free to comment or give suggestion.
Edited by: 963038 on Feb 17, 2013 7:14 PMWhen i omit the line OutputStream out = new FileOutputStream(saveFile);
and write only
ImageIO.write((RenderedImage) bufferedImage, outExtension,saveFile);
//out.flush();
then saving the image even in "png" also fails.
The following is the error code:
Note : FileMenuController is my file where the saveImage() is wrtten.
javax.imageio.IIOException: I/O error writing PNG file!
finished
at com.sun.imageio.plugins.png.PNGImageWriter.write(PNGImageWriter.java:1168)
at javax.imageio.ImageWriter.write(ImageWriter.java:615)
at javax.imageio.ImageIO.doWrite(ImageIO.java:1612)
at javax.imageio.ImageIO.write(ImageIO.java:1536)
at *newciptk.controls.menu.file.FileMenuController$1$1.run(FileMenuController.java:205)*
at com.sun.javafx.application.PlatformImpl$4.run(PlatformImpl.java:173)
at com.sun.glass.ui.InvokeLaterDispatcher$Future.run(InvokeLaterDispatcher.java:76)
at com.sun.glass.ui.gtk.GtkApplication._runLoop(Native Method)
at com.sun.glass.ui.gtk.GtkApplication$3$1.run(GtkApplication.java:82)
at java.lang.Thread.run(Thread.java:722)
Caused by: java.io.IOException: Operation not supported
at java.io.RandomAccessFile.writeBytes(Native Method)
at java.io.RandomAccessFile.write(RandomAccessFile.java:499)
at javax.imageio.stream.FileImageOutputStream.write(FileImageOutputStream.java:124)
at javax.imageio.stream.ImageOutputStreamImpl.writeInt(ImageOutputStreamImpl.java:91)
at com.sun.imageio.plugins.png.ChunkStream.finish(PNGImageWriter.java:136)
at com.sun.imageio.plugins.png.PNGImageWriter.write_IHDR(PNGImageWriter.java:401)
at com.sun.imageio.plugins.png.PNGImageWriter.write(PNGImageWriter.java:1135)
... 9 more
javax.imageio.IIOException: I/O error writing PNG file!
at com.sun.imageio.plugins.png.PNGImageWriter.write(PNGImageWriter.java:1168)
at javax.imageio.ImageWriter.write(ImageWriter.java:615)
at javax.imageio.ImageIO.doWrite(ImageIO.java:1612)
at javax.imageio.ImageIO.write(ImageIO.java:1536)
at newciptk.controls.menu.file.FileMenuController$1$1.run(FileMenuController.java:205)
at com.sun.javafx.application.PlatformImpl$4.run(PlatformImpl.java:173)
at com.sun.glass.ui.InvokeLaterDispatcher$Future.run(InvokeLaterDispatcher.java:76)
at com.sun.glass.ui.gtk.GtkApplication._runLoop(Native Method)
at com.sun.glass.ui.gtk.GtkApplication$3$1.run(GtkApplication.java:82)
at java.lang.Thread.run(Thread.java:722)
Caused by: java.io.IOException: Operation not supported
at java.io.RandomAccessFile.writeBytes(Native Method)
at java.io.RandomAccessFile.write(RandomAccessFile.java:499)
at javax.imageio.stream.FileImageOutputStream.write(FileImageOutputStream.java:124)
at javax.imageio.stream.ImageOutputStreamImpl.writeInt(ImageOutputStreamImpl.java:91)
at com.sun.imageio.plugins.png.ChunkStream.finish(PNGImageWriter.java:136)
at com.sun.imageio.plugins.png.PNGImageWriter.write_IHDR(PNGImageWriter.java:401)
at com.sun.imageio.plugins.png.PNGImageWriter.write(PNGImageWriter.java:1135)
... 9 more -
My iPod touch is not working in iTunes, but it is showing up on my "My Computer".
My iPod touch is not working in iTunes, but it is showing up on my "My Computer". The instructions from Apple Support is NOT effective. Please help.
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
FCP 6.0.2 - Capture Successful - Clips not saved! Help!
I'm running FCP 6.0.2 on OS X 10.4.11
I have a Sony HDR-FX1 camera and do most of my filming in SD DV.
I'm trying to capture footage on several tapes (about an hour per tape) using the Log and Capture method. The camera is plugged into my front firewire port. I've logged the tapes (as 1 hour clips) and have tried doing a batch capture several times.
Here's the problem:
The clip is captured for the entire hour and I'm presented with the message that the capture was successful. I proceed to click "Finish" and my clip stills shows as "offline" in the final cut pro browser. Also, when I look in my FCP "Capture Scratch" folder, the respective project folder is completely empty.
In other words, FCP is not saving my captured clips for some reason.
I'm happy to answer any other questions you may have and am willing to try anything at this point!
Thanks in advance for your help.Yeah - oddly enough, I don't run into this problem with shorter clips - just captured one that was 30 minutes long. But I really don't want to split these long clips up - it's easier to sync up the multiple angles when I'm dealing with clips that are all the same length.
You would think that if FCP encountered a problem while capturing these clips, it would give me some sort of warning - but no, it says successfully captured and then just doesn't save the darn clips! So frustrating to sit here for an hour watching it capture and have nothing to show for it. It's failed 8 times so far (that's 8 hours I'll never get back!) -
Voice memos app not saving properly
I am using an iphone5 running iOS7.1.1 and performing the following actions will cause Voice Memos app not saving recordings. I have sent a feedback to Apple but is wondering if anyone else is found having similar problems.
1) Run Voice memos app and start recording
2) At lock screen open camera app and take a picture
3) At same lock screen delete the picture taken
4) Lock screen will show RECORDING in progress
5) Open Voice memos app and it will also show RECORDING in progress
6) Save voice memo from app and the duration FROM the point of picture deleted WILL NOT be savedsame here ... iPhone 3gs/32 gigs ram/ios 4.3.1 ...
the app doesn't seem to work any more, and hasn't for some time:
"buttons" are unresponsive, or they appear to respond, but don't perform their function ... erratic behavior ...
very disappointing as this has gone on for some time ...
We appear not to be the only ones ...
Anyone with a solution?
Thanks -
Enhancement in IDOC_INPUT_ORDERS not saving changes after order creation
I have an enhancement at the beginning of the IDOC_INPUT_ORDERS function module used to create sales orders via EDI. In the enhancement, I take the data records and make some changes to some quantities and units of measure. After making these changes, I let the function module continue on as normal. The order does get created with my changes in them, however, the IDoc doesn't reflect my changes.
Here's an example: An EDI order comes in with 6 EAs of a material. In my enhancement, I change it from 6 EAs to 2 3PK. I then let it go on its way. The order gets created fine with 2 3PKs, however the IDoc after its a ll done still says 6 EAs.
The enhancement runs before the FM puts the data into the tables it uses. I tried using the last user exit to open the IDoc and editing it there using the EDI_DOCUMENT_OPEN_FOR_EDIT FM but it says its open.
Can anyone give me any clues on how to make my changes stick to the IDoc?
Thanks,
CurtisOk, I figured out why it's not saving. Not realizing it, but the tables are passed into the FM by reference, so what I'm changing is only a copy. So what I tried to do is use the 004 (I've also tried the 005) user exits to try to update the actual DB. I used the following FMs (EDI_DOCUMENT_OPEN_FOR_EDIT, EDI_CHANGE_DATA_SEGMENTS, and EDI_DOCUMENT_CLOSE_EDIT). The problem is that I can't change them because the IDoc is still open.
Does anyone have any ideas on how I can achieve my goal of changing the IDoc?
Thanks,
Curtis -
I have Wondows Vista... I tried to upgrade to Itunes 10.5, and received an error orginially stating that I was trying to install a version older than the one I had. I uninstalled all of itunes, and now I'm getting the error message "there is a problem with this windows installer package. Aprogram required for this install to complete could not be run.
Help! I have an IPhone, and I would like to get my Itunes upgraded so I can download the new Iphone software...
Thanks!I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....
Maybe you are looking for
-
How to populate the Data into Form
Hi, I would like to know how we can populate value when it opens into form manager. For ex A person opens a form he enter the emploee id and all corresponding fields should get populated in corresponding with that from database.
-
Hi I could not create index on a table. It shows like this Msg 208, Level 16, State 1, Procedure dba_trigger_log_db_events, Line 58 Invalid object name 'master.dbo.DBA_DB_DDL_Trigger_Event_Information'. What might be the error . Please help me to so
-
Canvas copy or subclass not working
Hi, I am trying to copy a canvas from a template form. This canvas has - 1. Frame 2. Rectangle 3. List Item 4. Two Push buttons. When I copy this canvas in destination form all the objects are changed to small size, from 100 to 0.1, from 303 to 0.303
-
Having mail 4.5 issues- open mail and get a new features message that says in order to use the new features, I must import existing messages into the new version first in order to use mail 4.5. Just recently put in MAC OSX 10.6.7. Once it imports I
-
Can't convert from CMYK to RGB in Illustrator CS6
I'm moving art over to a new document. It was created in CMYK. The new document has a color mode of Basic RGB. After pasting the art I select it all, and choose Edit | Edit Colors | Convert to RGB. After saving and re-opening the document, the art on