Touch 3.1.2 update and Volume Problem

Hey guys, im trying to find the 3.1.2 update for the ipod touch to download outside of itunes but preferably at apple.com somewhere, i have dial-up at my house and wi-fi at college. i need to restore my brothers touch but he wont let it out of his sight. i have both 3.0 and 3.1 saved on my computer (.ipsw files) does anybody know where i can find the 3.1.2 file? He's also having a problem with it when the headphones are plugged into it and he turns the volume all the way down you can still hear the music playing quite loud anybody else having this prob? any ideas on a solution would be much appreciated. -Thanks Jake
Message was edited by: Grimmjac

Okay, check this:
In settings>music, check to see if EQ and Volume limit are both off. (Also check volume limit is not locked.)
It appears as of right now you'll need iTunes to update to 3.1.2. (I figured Apple would have it elsewhere. My bad.) You can try here for 3.1.2: http://mac.softpedia.com/progDownload/iPhone-Firmware-Download-38026.html --but be advised you do so at your own risk.
Doc
Message was edited by: Doc

Similar Messages

My ipod touch was in an update and froze. I tried to restore and an apple just stays on front and the screen stays white

My Ipod touch was in an update and froze. It shows a blank screen and sometimes shows an apple. Now it will not restore. What do I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

My iPod Touch 4th Generation finished updating and now it won't turn on. the charge finishes, and when plugged in, it goes to a blue then white screen. and i cant do anything. also wont connect to iTunes. pls help

hi. my ipod touch i guess finished updating. and now when it trys to turn on, a blue screen comes up and then the blue screen changes to a white one. and i cant do anything to it. also it own connect to itunes. help pls

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Some other users have had the same problem

My ipod touch was trying to update and is now broken how do i fix it

My ipod touch was trying to update but wouldnt finish so i tryed restarting it, it is now frozen on a white screen, wont restart properly, and itunes wont read it. How do i fix it and whats wrong with it??

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

New Android Software Update and volume control

I recently got the new Android System Software update. The problem that I noticed right off the bat is that I can no longer turn the volume off. Only to vibrate mode. Has anyone else experienced this problem?

I have provided some information below that may help with the silent vibrate function.
If you are just using the volume keys on the side of the phone, you can only set it on vibrate (silent mode is not available through this method). If you would like to place the phone on silent, you will have to go through the settings and sound menu.
I have provided the information below:
Enabling silent mode
<Select menu> <Select settings> <Select sound> <Check Silent mode> <Select Vibrate / Never>
I hope this information helps!

Latest firmware update and more problems with 30" external displays?

Hello,
New macbook pro user since a few weeks, so first post here.
I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
Is anyone else in a similar situation after the latest update?

Hello,
New macbook pro user since a few weeks, so first post here.
I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
Is anyone else in a similar situation after the latest update?

Ipod touch 3gen failed to update and will no longer work

my ipod touch 3g tried to update but i failed and now my computer dosent reconize the ipod and the screen will not change

how can i fix it?

Please Help! 10.6.8 Update and subsequent problems

On Friday, 2/10/2012, the Software Update popped up and informed me that new updates were ready to be installed on my MacBook Pro.
I clicked the update button and the updater installed the following updates:
iTunes v10.5.3
Security Update 2012-001 v1.1
MacBook Pro Video Update v1.0
Remote Desktop Client Update v3.5.2
Keynote 5.1.1 v5.1.1
Safari v5.1.2
Java for Mac OS X 10.6 Update 6 v6.0
Soon after installation Safari started crashing whenever I opened new tabs. I reset Safari and that problem went away.
I also run a Virtual Machine (Windows Vista imported from a Sony Vaio). The virtual machine has never had a problem and I used it on Thursday before the update and it worked fine. However, after the updates, I can no longer use the virtual machine. It has been corrupted. I get a message that says "Unable to Access Hard Drive 1: input/output error."
Then my whole Mac started running slow, especially Safari. In Safari, pages are slow to load and I get the spinning color wheel (or "beach ball," as I have heard it referred to) when I'm on any web page. Pages take long to load. After they load, I still get the spinning color wheel consistently.
Other programs are somewhat slower to load, as well, and when switching between open programs, there are delays and even more spinning color wheels and beach balls.
My computer has never had a problem until after I installed those updates.
I have repaired permissions and I have also re-donloaded the combo straight from the Apple website, but that did not work.
Is anyone else having this problem? Or has anyone else had this problem? What to do?
Thanks.
And, uhm, no- I did not have Time Machine set up, unfortunately.

Grant, thanks for the reply.
I have NOT been considering a new hard drive. My MacBook Pro is not even two years old, yet (I bought it in May 2010). So, the thought of having to replace my hard drive within 2 years has not even entered my mind and (as I stated) I only started having these problems within the past 2 weeks after having installed the latest updates via Software Update.
Really, if my Hard Drive needs to be replaced after less than 2 years of light use, then I will just chalk this up as a lesson learned and just not buy another Apple product and would probably just buy a Windows-based laptop rather than replace the HD in my MBP.
I am working on transferring my files (the ones that will still open and/or copy) to an external hard drive and doing a clean install of my OS X. I also am trying to figure out if I can somehow manage to save my pics that will not copy to the external hard drive but are saved on my iPad before I do so.
I'm not a computer or Mac genius by any stretch of the imagination, but I do appreciate your reply and advice. Unfortunately, I don't have any idea what it means to re-write a "wvwey block with a known-good pattern." Is that something I have to do manually? You stated that the option is in Disk Utility. Is "write zeroes" an option that you can select or is something you have to input manually? Can you break it down in simple terms for me or give me some step-by-step instructions or a link?
I apologize for my ignorance, but (again) I do appreciate your replay and advice as well as that of HackInt0sh.
Thanks.

Airport Update and New Problems

Every since I exposed my rock stable mac to the last airport update and system update, I have had some connectivity problems with my airport. I cannot get Back To My Mac to work. I can't print off of my USB connected to the airport. I went into Airport set up and the airport does not recognize the printer. I tried to get on my desktop mac in the other room, and can't log on. I can't see my wife's computer sitting across from me. Should I be looking at a different problem, or is this a up-date conundrum?

I'm still experiencing these problems with the 7.4.2 firmware upgrade. I think there may be a problem with the computer's Airport card, not with the base station. Perhaps the 7.4.2 firmware has nothing to do with it. Maybe it's a problem with an OS X update. Sometimes, inexplicably the internet will go offline for a few minutes. During this time not only my network (coming WiFi from my Airport Extreme Base Station) but also all of my neighbor's networks suddenly disappear. A few minutes later everything returns to normal. Also during this time my ISP remains online; there is no problem with the ISP. The MacBook is the only device that seems to "think" that all internet networks are down. Another big tip off is during this time the Airport utility fails to recognize my base station at all. It doesn't even see it... period. If this were an ISP problem the Base Station would still appear as visible to the AirPort Utility.

Update and installation problems

I am having issues with Creative Cloud updates and installations.
None of my Apps will update. I am prompted to update, I click the update button, Cloud says "updating software" but all attempts stop at 0%.
Similar issues Installing Apps. Installations start but all stop at 90%. No error messages at all.
This is extremely frustrating and all my Apps are in need of updates to fix minor bugs which are effecting my workflow.
Can you help?

We can't know. You have not provided any exact system info or other details like the install/ update logs. You can always run the cleaner and start from scratch.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Troubleshoot Creative Cloud download and install issues
Mylenium

The update and other problems PLEASE HELP!!!

The ovi store on my phone asked me to download the newer version which I did, is there an update for ovistore on the computer because I haven't heard about it if there is one and it may solve the problems I have been having with it:
1. I don't receive the messages when trying to get an app
2. It wont let me down load apps when I connect my phone to the computer
(also on the nokia website it told me to click the download and install button to get an app when plugged into the computer but I can't find it..Any ideas where it is???)
please help i've had this problem since I first set up my account and its really bugging me now!!!!!!

(Apologies for barging in Steve.)
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80071A91, or some other number? (If they're another number, what number are you getting?)

IOS 7 Update and Configurator Problems

Since the iOS 7 update, we have been unable to 'Check In' devices with Configurator, and refreshing devices has been difficult. We have iPad 2s and Configurator 1.3.1 running on Mac OS 10.7.5. Sometimes the message is, "Could not create a backup", and sometimes the message is, "Unable to fetch a list of installed apps". Is anyone else having the same problems?
We have updated all software - OS, Configurator, iTunes, and all iOS Apps. We have 4 paid apps (iMovie, Pages, Keynote and Configurator), and no free apps for the VPP account on each iPad. Each iPad is named and assigned to one student. Students have their own iTunes account to add free apps as needed. The only way I have found that this works without error is to delete the student name from "Assign", but then I can't transfer any of their information when a device has problems. I have tried this with devices that are not having any problems to make sure it is not related to other problems. These problems did not exist until the iOS 7 update. Hopefully a Configurator update will be on the way soon?

andrewgodin wrote:
Here is what worked for me in dealing with this hot mess.
Using iTunes, I went to each individual iPad and restored it to factory settings. Takes about 5 minutes per iPad.
When it was done, I didn't set it up as a new iPad, I simply clicked the "eject" button so it no longer appeared in my list, which prevented me from restoring the same iPad twice and wasting time.
Once all of them were done, which took an entire day, I opened up the updated version of configurator. All of the iPads restored and installed the apps that I need and the problem was solved.
Did this about five minutes ago. Time will tell if it sticks, but for now, they are fixed.
You could probably try to downgrade your iOS7 cart back to iOS6, that's what I ended up doing.

IPod touch erased when I updated and synced it on a different operating system. Forgot password to backup file. Windows 7 is a bust for the newest version of itunes. Tired of fooling with it, so I tried to update and sync ipod to hubby's laptop.

Sooooooo sick of trying to fix the bug with the newest version of itunes and Windows 7. I'm over it. Tried syncing ipod to hubby's laptop. When update and sync was complete, all my apps, music, and pictures were gone. When I open my itunes account on his computer, they are gone from there as well. I cannot open itunes on my computer because I cannot fix the compatability issue. Don't tell me how to go to 'computer', click 'program files' etc. etc...... Did that, unchecked compatability mode and nothing is fixed. About to take a hammer to darned thing.

Also, I have forgotten the password to my backup file, which could solve everthing. I don't really remember ever setting a password for the backup file. Tried every password I've ever used with this device.

Droid Eris 2.1 update and facebook problems

I just downloaded the Eris 2.1 update and the new facebook update today. I have had nothing but trouble since then. I went to the Verizon store for help and got nowhere. The facebook widget does not work. The facebook ap works partway. I cannot retrieve the newsfeed or profile from the ap. HELP!

This may have already been covered... haven't read all the posts... but I have lost the following due to the 2.1 update... 1. SPEED DIALING... 2. WEATHER AND LOCATION ON THE HTC Sense UI... 3. Voice Dialer keeps arbitrarily starting and locking up. 4. When I pull up my APP KILLER, it shows random apps are running... with as many as 8 different apps (many of which I was not nor have not used) are active. It's no wonder battery is dying so rapidly.

Phone update and whatsup problem

kindly install phone update and no connection of wats up

Hi kenyapithicus,
Welcome to the forum!
For which phone model is this? You may check this link for information about software updates: Nokia Software Update By the way, can you give us more details about the WhatsApp issue? What connection are you referring to (Wi-Fi, mobile data, etc.)?
We'll wait for your response.

Touch 3.1.2 update and Volume Problem

Similar Messages

Maybe you are looking for