Touch and keyboard not working properly

hello there,its been one month i am using this laptop hp envy energystar 15-u201ne. i have an issue on touch and keyboard..sometime when i am typing there is no effect in screen from keyboard. and sometime the touch is not working properly. how can i fix this issue..?

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 15-u201ne x360 and issues with the TouchScreen and the Keyboard not functioning correctly. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. If you need it here are links to troubleshoot the Touchscreen and the Keyboard. I hope this helps. Thanks.

Similar Messages

FireFox auto updated to 6.0 this weekend and has not worked properly since. I have uninstalled and reinstalled. Made sure all windows componets were up to date and still no joy. Any idea? Windows 7, 64 bit, normal configfuration. It is extreamly slow.

FireFox auto updated to 6.0 this weekend and has not worked properly since. I have uninstalled and reinstalled. Made sure all windows componets were up to date and still no joy. Any idea? Windows 7, 64 bit, normal configfuration. It is extreamly slow and never finishes loading ANY page.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

TS3003 Installed QuickTime7 from Snow Leopard installation disc and still can't view videos on iPhoto. A box appeared saying "you have installed Mac OS X software older than your current version of Mac OS X and may not work properly." Now what?

Installed QuickTime7 from Snow Leopard 10.6.8 installation disc and still can't view videos on iPhoto. A box appeared saying "you have installed Mac OS X software older than your current version of Mac OS X and may not work properly." Now what?

Download and install the latest QuickTime Player for Snow Leopard > http://support.apple.com/kb/DL923

[SOLVED] Xorg and keyboard not working after upgrade.

Hi guys,
after a `# pacman -Syyu` I got Xorg not starting and keyboard not working: I am unable to do anything.
I'm posting here pacman's log that I got by booting an Ubuntu Live CD: https://gist.github.com/anonymous/7517806
Any hint?
How do you recover a system once it's gone like this? Many thanks in advance.
J
Last edited by ifsixwasnine (2013-12-23 13:58:16)

WonderWoofy wrote:
I wouldn't necessarily call this [SOLVED]. At best I would probably mention that you found a workaround. The addition of '(downgrade)' likely makes it fine, but just FYI for future threads. There are two reasons for this. One, others who find this thread are likely to dig into it thinking there is a real solution, and two, if you mark it as [Solved] it might generate less attention, lessening the chances of you actually being helped to a real solution.
Just my 1.46¢
You're right, problem wasn't actually solved. In fact, yesterday I upgraded the whole system again and the same problem showed up, but I got it fixed.
Same scenario: after a boot (shorter than usual), what I had was a tty, but I noticed something that I hadn't noticed the last time: the prompt said "Arch Linux 3.11.[?]".
The kernel version was supposed to be 3.12.[?] so I started investigating and after several attempts, this is how I got the system working again:
1. Chrooted into the system
2. Wiped /boot
3. Re-installed grub
4. Re-installed linux kernel
5. Re-created grub.cfg
6. ???
7. Profit
I'm pretty sure that what originated the problem wasn't a "kernel issue" as I pointed out in my previous post, but it was an incorrect installation of grub: in fact, the grub prompt never showed up before yesterday, the system used to boot straight, ignoring the 5 seconds timeout.

My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

As Peter says above, only an Apple Store genius can advise you.
But to further clarify, you seem to postulate that if Apple helps you, the cure would be a replacement. That is not necessarily true. Let them look at it and advise you what the remedy is. They may offer you nothing (saying it's your fault), or they may offer you a solution (keeping your current iPhone), or possibly a replacement.

Display has white and grey lines and blocks crisscrossing it and touch functions are not working properly on half the screen.

I dropped my iPhone 5S and it landed flat on it's face (it was in a protective case). Since then my touch screen display is not working properly. I have white and grey lines and/or blocks crisscrossing the screen both horizontally and vertically. Screen responds to touch in odd random ways, but rarely does what I am trying to do. Can't call or receive calls because can't dial or answer phone via swipe. Can't text or read incoming texts. All functions seem to be working except that I can't access them because the touch screen is acting up. If I move the phone around it randomly accesses different apps or functions, but I have no control over them once the appear on the screen. Touching screen just causes phone to randomly choose something else to open. What have I damaged?

Shanegang77 wrote:
What have I damaged?
We cannot possibly tell. Obviously some hardware inside. Take it in to an Apple Store. They will offer you the opportunity to swap the phone for $269 in the US. Prices vary by country.

Touch pad and keyboard not working!

Just the other day while my computer was starting up i took a tissue and started to clean it. Then the password screen popped up. I typed in the password and started to browse the web. After about 1 minute, my touch pad and keyboard stopped working! I tried to restart the computer and it did nothing. I then restored the computer to this morning ( the update my computer did while it was turning on also the time i was cleaning it. ) and it still did nothin. Please help with this problem, right now im using a USB mouse and a on screen keyboard!
I am using a HP pavilion g7 running windows 7 and AMD a6 vision.
product key: P9BXR-F3G4G-HQD6J-XBMJP-93QKT
please help me
BTW i did press somekeys while cleaning the laptop.

Yes I installed the right drivers before trying to dual-boot with Linux. The issue was there from the beginning. But the issue appears only after 1 or 2 hours of use. It was mandatory for me to install Linux, for my studies. So I hope it doesn't break the warranty, because it would be unfair for people who need to do what I did.
The problem is that I am right now in Finland, but I am French and I bought my netbook when I was in France. So if I send it back to HP France, it will take weeks and weeks to get it back here, and shipping cost will be really expensive, and I will be without computer during several weeks, which is impossible for me as I need it for my studies. That is why I want to go to HP Finland and ask them. I know I could call them but the last timeI called HP France, I waited for hours and didn't get any answer on the phone.

9810 funtions and screen not working properly.

HI all, hoping to find some help here. My 9810 is acting up. None of the keys are working, even the 5 below the screen. Sometimes the track pad works but not when it is pressed, and when the back botton works it puts me into sreach mode and looks for the letter "H" only. The touch screen is fine. This was before upgrading to OS7.1. I have done multiple hard resets and it does nothing at all. This has been going on for three days now. It hasn't be dropped or anything.
Last night I upgraded to OS 7.1 now my back ground does not rotate properly with how the phone is being held it does rotate, When you hold it upright it thinks its on it's side and vise versa.
Has anyone had a similar problem, and how can I fix it? Or is it one of those ones when you just get a new phone. I have only had it since Feb 29, 2012
Thanks

Hello Champi,
Welcome to the BlackBerry Support Community.
The following article will assist regarding the issue you are experiencing with the keyboard and trackpad on your BlackBerry® Torch™ 9810 smartphone:
Trackpad, trackball, or keyboard not working on a BlackBerry Smartphone - http://www.blackberry.com/btsc/KB29640
We hope this helps.
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Aluminum Wireless Keyboard not working properly after Firmware update 1.1

Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.

I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve

Apple keyboard not working properly

I have had owned this wireless keyboard for over a year now. It has been working fine up into like 3 days ago when all of a sudden certain keys where not working properly. I disconnected the keyboard and tried pairing but it is not allowing for the pairing to go through. I also tried it on my ipad same keys where not working properly. Nothing was spilt on it. It just stop working right any suggestions

Gabor-
Try resetting the iPad's network. Go to Settings-General-Reset-Reset Network Settings. You will probably need to re-pair Bluetooth with your keyboard and reconnect your WiFi.
If that doesn't help, try resetting the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting doesn't hurt anything, and sometimes corrects mysterious problems.
Fred

Internal Keyboard Not Working Properly Macbook 7,1

Hi there, I have a macbook which I purchased on sale early 2011, version 7,1.
I was using it today and many applications opened and the machine froze, so I turned of the machine. On turning it back on it came on in safe mode and I was unable to use the keyboard properly, in the sense that everytime I pushed a key say an "R", a N would come up or even a number. the function keys stopped working also. The "mouse" pad on the computer worked fine. If I push buttons on it now, they do absolutely nothing but the tracking mouse works fine.
I rebooted it, but no difference. I have inserted a USB keyboard, and that works fine.
I have:
1. Tryed rebooting PRAM and SMC
2. Followed troubleshooting on the Mac website for keyboard problems
3. Installed Mac Mountain Lion and cleaned the hard drive and rebooted it with the new Mac Mountain Lion.
4. Ensured sound and the mouse pad are not turned on.
Again, the internal keyboard is not working properly.
I am unsure what to do. I have not spiled anything on the keypad and there has been no trauma.
Does anyone have any ideas? I am writing this using a Mac external USB keyboard.
I am thinking it might just be worth buying another Mac, but I have only had this for 21 months.
Any help would be apreciated.
Much thanks

Additionally to no sound available, I could only type capital letters. When I opened my MacBook Pro late 2008, I found the small cable loose, marked by the red arrow. Opened the safety mechanisem, inserted it again, closed the stirrup again, restart - everything fine again! :-))
Hope it helps somebody else - I lost hours troubleshooting the software...

Keyboard not working properly on HP laptop - Pavilion g series/Windows 8

My Keyboard keys are not working properly on HP laptop Corei3 - Pavilion g series/Windows 8. Please I need help.
Monty West

Hi Monty12,
I understand that you are having a problem with the keyboard key for your laptop. I will try my best to help you with this issue. To better guide you, could you please give me some more information.
1. What is the Model Number of your laptop? LINK: How Do I Find My Model Number or Product Number?
2. What operating system are you running on the laptop?
3. Are the keys sticking?
Please let me know and I will be happy to help.
Thank you,
I worked on behalf of HP.

My 5800 touch screen is not working properly.

Hi,
Frequently my 5800 touch screen is not working. Some times I am unable to use the screen. It's just hung. The call, menu and disconnect buttons only work during this time. Can any please let me know what might be the problem.?
Thanks in advance,
Tarun Konduri.

Tarun_Konduri wrote:
Hi,
Frequently my 5800 touch screen is not working. Some times I am unable to use the screen. It's just hung. The call, menu and disconnect buttons only work during this time. Can any please let me know what might be the problem.?
Thanks in advance,
Tarun Konduri.
Tarun_Konduri wrote:
Hi,
Frequently my 5800 touch screen is not working. Some times I am unable to use the screen. It's just hung. The call, menu and disconnect buttons only work during this time. Can any please let me know what might be the problem.?
Thanks in advance,
Tarun Konduri.
Dear all,
I had the same issue with my nokia 5800, finally I found very interesting thing, I have been doing everything to bring my phone back to original condition where simply I can touch and access the phone.
Actually the issue was with the thin plastic piece which was put on the touch screen for its protection. I was struggling to touch and access the phone but i coudnt for almost 2 weeks, it was directing me to bottom left corner touch buttons of the phone and automatically opens and activate functional which I didn't want.
Solution was, I simply removed the thin plastic layer from the phone , Now it works fine.
Hope this will help.

[solved] mouse and keyboard not working (and previous fix wont work)

i made a clean default setup with
arch
latest kernel - 2.6.29 i think
xorg 1.6.1
video-intel-legacy
on a 865G intel box + tried usb and ps2 keyboards + usb mouse
when i start X the mouse and keyboard dont work (and i have to hard reset the box) in all of the setups i tried. the AutoAddDevices fix suggested before does not work this time
- without xorg.conf
- with auto-generated xorg.conf (X -confogure)
- with the automatic conf +
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
- with tiny xorg.conf containing only
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
- with dbus/hal enabled and disabled in rc.conf
how i make it work
Last edited by ash (2009-04-30 19:01:41)

the setup that works to me now is
automatic xorg.conf with the AutAddDevices False (disable hotplug) lines
dbus and hal enabled in deamons
this lines instruct xorg to use xf86-input-mouse/keyboard instead of evdev. ie it looks like with evdev there is no point in xf86-input-mouse/keyboard
Last edited by ash (2009-04-30 18:26:16)

Filter and navigation not working properly

Hi Gurus,
I have two reports - report1(source) and report2(target) report.
In report1, it shows two columns - Market_ID, Amount_sold
In report2, it shows two columns - Market_ID, Reasons(where Market_ID is made prompted)
In report1, I have made the Value Interaction as 'Navigate' and the target as 'path of report2' in Column properties ->Column Format
But, when I click on Market_ID(report1), it is NOT showing the details of that particulat Market_ID(report2).
It is showing the details of whole Market_ID in report2. That means, the filter is not working properly.
Is there any method in which the report2 shows the details of particular Market_ID which is selected from report1(market_ID)?
Best Regards,
J

yes you can,
in your source add a master_name column and in that make the navigation.
in the master_id column go to column format and style options and check the Use Custom CSS style option and type,
display: none
now in your source the master_id column will get hidden. in your target make the master_id prompted.
now click on the master_name in your source, your target will get filtered by the corresponding msater_id
thanks,
Karthick
Edited by: kart on Jun 7, 2010 11:52 AM

Touch and keyboard not working properly

Similar Messages

Maybe you are looking for