Touch doesn't work after clean install of Windows 7 Professional

I have an IQ526t. I did a clean install (remove drive/repartition/format drive) of Windows 7 Professional, and now the touchscreen feature doesn't work. I've been on forums here and at Mirosoft, downloaded various drivers, rebooted multiple times, etc....no luck. I get the sound, but no response. Thoughts???

Hello bmarkj,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you have removed the recovery drive and installed Windows 7 by not using the OEM version that came with your computer. You have a couple options here, first you can download and install the HP Support Assistant and let it download and install the software and drivers that came with your computer. You can alter the settings so that the updates are manually done giving you control over what gets updated and what does not. Or you can download and install the drivers and what software you want from HP TouchSmart IQ526t CTO Desktop PC Drivers page. The choice is yours.
***NOTE: Be warned that there is software that come with some of the computers that is ONLY available from the recovery drive so you may not see everything you are used to seeing. The only way of recoverying this software is through the HP Recovery Discs.
I hope I have addressed your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

Satellite P305-S8820 - FN key not working after clean install of Windows 7

Hi,
I have a Toshiba Satellite P305-S8820. I recently did a clean install of Windows 7. I have loaded the Toshiba value added driver pack and the trackpad driver but still cannot get the trackpad or the FN key to work.
Any ideas?

Hello John
You are like other millions other users and what you can read is relevant for you but sometimes it works a little bit different. For you it can be useless but sometimes it helps. Fact is that this utility is offered for some notebook models.
Generally speaking you are right and after VAP installation the job should be done but Ive faced the same problem in the past. Sometimes it works well and sometimes not. You will not believe me but in the past I used stuff for Satellite P300 to get all stuff working on Satellite A350. I cannot explain why this happen and it sounds crazy but it is the truth.
You can also try to play a little bit with VAP installation. Try to install VAP for A300/A350/P300. Generally speaking it is the same and if this will not work well you can remove it from the system.
Launcher for flash cards? It must be listed in MSCONFIG > startup > TcrdMain.exe

Re: Satellite P305-S8820 - FN key not working after clean install of Windows 7

I have a problem with a Satellite A210-103. After installation of Toshiba Value Added Package (Flash Cards Support Utility not available for A210), reboot, restarting Toshiba Flash Cards and pressing the FN key several times the problem still exists.
It must have other reasons why so many user have problems with the FN keys.
John

I have searched for A200 and A210 in the Toshiba sections of Equium, Satego, Satellite and Satellite Pro but their are no Flash card support utility. In the details of the "Value added package" are the words:
"TOSHIBA Flash Cards provides the Hotkey function and the launcher function that starts the Hotkey function and launches the other TOSHIBA utilities"
So I think it's useless to search for this utility. It's more important for me to know which files (like name of the launcher program) must be started to use the FN keys.
John

WT8-A32 missisng drivers after clean install of Windows 10

Hi, I wanted to do a full clean install of Windows 10 in my Encore WT8.So I first upgraded it to Windows 10 and then runned the installation via a USB Pen. During the installation I missed the touch screen. but I used and external Keybord+Mouse to carry on.The issue was that after finishing the installation I missed a lot of drivers. Touch, audio, ...If I try to update them via Device Manager it simply state that there are no drivers available Did anywone made a sucessfull clean install of the Win 10 in the Encore WT8-A32?Anyway of getting the drivers to be installed on a clean install of Windows 10? I tired to install some drivers from the 8.1 version but it complained it was not compatible. Thanks

During the installation I missed the touch screen. but I used and external Keybord+Mouse to carry on.The issue was that after finishing the installation I missed a lot of drivers. Touch, audio, ...If I try to update them via Device Manager it simply state that there are no drivers available Did anywone made a sucessfull clean install of the Win 10 in the Encore WT8-A32?Anyway of getting the drivers to be installed on a clean install of Windows 10? I tired to install some drivers from the 8.1 version but it complained it was not compatible. My notes about a clean install are in another thread, but you have done 99% of what you need.Just grab the 'intel platform installer' and run it. This will give you a functioning touch screen.The version I used was win8.1 vintage and works without a problem.

How save factory software on T400 and reinstall after clean install of Windows 7

Hi
I have a Thinkpad T400 2764-CTO Running Vista Business 32-bit and want to do a clean install to Windows 7 Pro.
Sounds like I can get all the drivers via System Update 4.0, but I'm concerned about how to save/re-install some of the software that came on the machine.
In particular, Intervideo WinDVD and Roxio Media Import. If I go to my Programs folder and copy the folders for Roxio and InterVideo onto a flash drive, and then re-copy into the Programs folder on the C drive after a clean install, does that work?
I've never used Rescue and Recovery on the laptop, and am not sure how it works. Any advice is appreciated.
I'm not sure I even know all the stuff that exists from the factory. Anything else I should be concerned about? Thanks! - Kathleen

Please review the HP software and driver download page for drivers/software that are compatible with Windows 7. Also note that there is a BIOS update for Windows Vista that improves the system's ability to function with WIndows 7. Also read "Alerts" and other information regarding this product and Windows 7.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Fingerprint Driver Install after clean install of Windows 7

I've performed a clean install of Windows 7 on my X300 (6476CTO). I downloaded and installed the Fingerprint Driver 5.9.2 for Windows 7 32-bit (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73583). However, everytime I reboot I get a message that the Fingerprint Reader cannot access dll file vtapip.dll and the fingerprint registration fails. What can I do to remedy this problem?
I did notice on the readme that machines running less than the 5.6 version of the fingerprint software should upgrade to 5.6.2 before installing newer versions. Does this include clean installs? If so, where can I get the 5.6.2 driver? I cannot currently locate it.
Thanks,
Mindy

I have searched for A200 and A210 in the Toshiba sections of Equium, Satego, Satellite and Satellite Pro but their are no Flash card support utility. In the details of the "Value added package" are the words:
"TOSHIBA Flash Cards provides the Hotkey function and the launcher function that starts the Hotkey function and launches the other TOSHIBA utilities"
So I think it's useless to search for this utility. It's more important for me to know which files (like name of the launcher program) must be started to use the FN keys.
John

Mail search not working after clean install of 10.5.4 on new 20" iMac

Apple Mail search is not working. Search on "subject line" works, but search on "entire message" does not. For example, searching with "parking" yields NO results, and there are many messages with the word "parking" in their body in the mailboxes. It happens with both "In Box" and "All Mailboxes" checked.
What's going on?
I did a clean install of Mac OS X on a 20" iMac using the Install disk shipped with the machine. Then I ran Software Update. Still, the problem happens, on a clean baseline system.
Argh.

I've had this problem since Tiger. Various solutions have been posted, but none have worked for me. It really cripples Mail--I've used emails as my personal database for years, kind of a history log, which worked great in Eudora but Eudora isn't being supported anymore.
After updating to X.5.5, I can search "entire message" for "All Mailboxes" and find everything including emails in the mailbox I was viewing (often finds 60,000 occurences, but doesn't take very long--it's just incredibly tedious to find the one I want from such an enormous set of results). I can also find everything using Spotlight, outside of Mail. But if I am looking at any mailbox, like Inbox, search "entire message" never finds anything at all. Searching for subjects etc works fine.

AirPort doesn't work after Leopard install

I have an iMac 20" 2GHz Core 2 Duo and my AirPort doesn't work. I reset my PRAM, erased the hard drive and installed a clean copy of Leopard after picking it up from the Retail store. I had exactly the same problem with 9A559 and the seed update and I ASSUMED it would be fixed by the time the final release is out. It doesn't detect any networks, even if i move the access point very close to the computer. I tried disabling all security on the access point. Tried changing channels. Tried resetting the access point to defaults and reconfiguring from scratch. Tried manually putting the SSID in on the iMac but none of it worked. The access point is a Linksys WAG54G with the latest firmware. If anyone can help me, please do because the AirPort is the ONLY way this computer can access the internet.

Just to clarify my situation:
Erase and install of Leopard
Airport card is detected:
Wireless Card Type: AirPort Extreme (0x14E4, 0x89)
Wireless Card Locale: Worldwide
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (4.170.25.10)
Current Wireless Network: wireless network not available
No networks are available for selection, (i can normally see 4 or 5)
System.log has:
Oct 27 00:07:04 my-names-imac SystemUIServer95: Error: Apple80211Scan() error 16
Oct 27 00:07:04 my-names-imac SystemUIServer95: Error: __performScan() failed, entering fail-save workaround..
Oct 27 00:07:07 my-names-imac SystemUIServer95: Error: Apple80211Scan() error -6
Oct 27 00:07:07 my-names-imac SystemUIServer95: Error: __performScan() failed (-6)
Oct 27 00:07:14 my-names-imac SystemUIServer95: Error: Apple80211Scan() error -6
I'm about two feet from my wireless router, none of the other (Tiger) computers have issues connecting to it.
Anyone else see the Apple80211Scan entries?

Snow leopard app store not working after clean install. Anyone else having this problem?

The App store has stopped working after a clean install of OS X Snow Leopard. The get/install buttons go grey after I've clicked on them then nothing....
It doesn't hang, all the navigation buttons work fine, and I can log into iTunes fine. Just can't buy anything...

Try resetting the App Store and Clearing Cookies.
Reset Learned from Old Toad

Spotlight won't work after clean install

I did a clean install of a 10-seat licence of 10.5 server on the primary partition of a Mac Mini. Logged in with the admin account (the only account), I cannot get Spotlight to find anything at all (even searching for something that it should find, like "Safari" just gets me "No Results Found").
I've done software updates, re-booted, and repaired permissions. Any ideas?
(On a side-note, I'm trying to find where the Weblog server stores media files; so if anyone can tell me that I'd appreciate it).

I can't believe it , I've finally got Leopard on my brand new iMac, which was supposed to come with it pre-installed! A friend who has Leapord came over and saw my screen and icons and said, 'that doesn't look like Leopard, you should reinstall.' We did, and now everything works great (including printer, Bluetooth A2DP and Spotlight, which hadn't been working prior). Airport works, too, but it was working before thanks to the WPA fix. Somehow my Intel iMac, purchased in December from the San Francisco/Marina Mac Store, came with a faulty OS installation. I wasted soooo much time trying to fix it when I just needed to reinstall (w/o erasing my HD). Maybe this can help others having similar problems. Happy Mac-ing!

Demo servlet IsItWorking doesn't work after fresh install

Hello,
We did a fresh install of Oracle 9iAS 1.0.2.2 on Hp-ux 11i
The installation completed succesfully, but
when trying to run the demo servlet IsItWorking, we get error 'The page cannot
be displayed'
The apache error_log file contains following lines:
[Thu Apr 18 17:12:03 2002] [notice] FastCGI: process manager initialized (pid
9809)
[Thu Apr 18 17:12:03 2002] [warn] OPM: ADM: process 9810 created server process
9811 (group group1, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:03 2002] [emerg] OPM: Watcher starts with an id=9810
[Thu Apr 18 17:12:03 2002] [warn] OPM: ADM: process 9810 created server process
9812 (group group2, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:04 2002] [notice] Oracle HTTP Server Powered by Apache/1.3.19
(Unix) mod_fastcgi/2.2.10 mod_perl/1.25 mod_oprocmgr/1.0 configured -- resuming
normal operations
[Thu Apr 18 17:12:18 2002] [warn] OPM: EW process rp5400:0 (pid:9811) died,
restarting.
[Thu Apr 18 17:12:18 2002] [warn] OPM: ADM: process 9810 created server process
9819 (group group1, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:18 2002] [warn] OPM: EW process rp5400:0 (pid:9812) died,
restarting.
[Thu Apr 18 17:12:18 2002] [warn] OPM: ADM: process 9810 created server process
9820 (group group2, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:21 2002] [warn] OPM: EW process rp5400:0 (pid:9819) died,
restarting.
[Thu Apr 18 17:12:21 2002] [warn] OPM: ADM: process 9810 created server process
9821 (group group1, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:21 2002] [warn] OPM: EW process rp5400:0 (pid:9820) died,
restarting.
[Thu Apr 18 17:12:21 2002] [warn] OPM: ADM: process 9810 created server process
9822 (group group2, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:23 2002] [error] OPM:Can not find one alive process
[Thu Apr 18 17:12:23 2002] [error] OPM:Can not find one alive process
[Thu Apr 18 17:12:24 2002] [warn] OPM: EW process rp5400:0 (pid:9821) died,
restarting.
[Thu Apr 18 17:12:24 2002] [warn] OPM: ADM: process 9810 created server process
9824 (group group1, module JServ), and inserted in proctable as entry 0
Any idea?
Thanks

Hi -
I was wondering if you solved this problem. I had the exact same issue on Win2K after I installed the Java Portlet Development Kit. Now my Apache JServ does not work.
This is a sample of my error_log:
[Fri Jun 07 10:48:01 2002] [notice] FastCGI: process manager initialized
[Fri Jun 07 10:48:08 2002] [error] OPM:Can not find one alive process
[Fri Jun 07 10:48:08 2002] [error] [client 127.0.0.1] File does not exist: /servlet/IsItWorking
[Fri Jun 07 10:51:22 2002] [warn] OPM: ADM: Process 380 terminated using SIGTERM successfully
I have re-checked my jserv.properties, jserv.conf, zone.properties several times and I can't see the problem. I tried to manually remove the entire PDK and go back to my original state (I saved a copy of all my config files) but it still doesn't work.
Did you find a way to fix this?
Thanks!!!
Heather

Sync doesn't work after re-install

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1015872 /questions/1015872]''
I had sync working on my windows machine, and firefox was always up to date.
After re-installing windows I connected to my Sync straight away account and nothing is updating, no bookmarks, history, passwords, nothing.
No, I haven't upgraded to a new sync or old sync or anything like that, i didn't even know there were different ones. How do I get my data back and sync working again?

Sync isn't meant to be used as a backup device, but merely to sync data between multiple devices.
So it is not guaranteed that you can restore data from the Sync server.
See also:
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/kb/Backing+up+your+information

The 7 key doesn't work after lion install

The 7 key on my MacBook pro keyboard doesn't work following lion installation. (I'm using my iPad right now obviously!)
When I press 7, basically random stuff will come out. A set of 3 to 5 random numbers or some "command" that whatever program I am in doesn't recognize.
I tried rebooting. I have no idea where to even begin, help!

And of course this morning all keys are back to working again! But last night it was 7, J, U gibberish.
At first glance it does seem like something that might be a hardware problem, but I am deeply suspicious of coincidences like this. I'm kind of like house md that way I guess. Especially when at least two of us experienced this.
I think I will also wait for the next software update and see if that helps. At least I have my iPad to use when the keys are on the fritz.
Good luck!

Power settings missing after clean install of Windows 8.1 on Helix

After a smooth clean installation of Windows 8.1 and loading all the Lenovo drivers, software, and apps, the system runs extremely well except in the Lenovo Settings Metro App, I no longer see the option of battery life protection (to charge only up to 50%). In addition, in the Windows power settings, there are only four power profiles: high performance, balances, power saver, and fly mode. I do have Lenovo Power Management Driver and Settings Dependency Packages installed. Lenovo's System Update does not show any missing installations. I wonder if anyone can give me some clues. Thanks.
Solved!
Go to Solution.

someotherguy wrote:
The battery health mode setting was removed. We don't support this setting anymore.
The preload comes with a couple additional power profiles that we don't make available except in the preload. However they are not anything special. You can create your own power profile(s) in the Power control panel to do whatever you want them to do - idle timers, CPU speed, etc.
I accepted the answer as a solution, but I frankly think the battery health mode is very important to have.
My T400s, with both the main and ultra-bay batteries, started with about 6:30 hours of battery life (of course, under my typical work load). 4 years later as today, it still has about 4:30 hours. If I kill some processes and use IE instead of Chrome, I can get 5 hours. I think the long battery lifes have been a consequence of the setting of no start of charging until below 85%.
To replace either battery in Helix, a lot of effort is needed. I think it makes a lot of sense to keep them health.

Can I use the same serial number for master suite when reinstalling after clean install of windows 8

I am reinstalling windows because windows got corupted. I can not access my computer to deactivate the software. Do I need to be worried about not having deactivated it? I will be reinstalling mastersuite 6 after I get windows 8.1 clean installed on the same computer. I just want to make sure I will not have any problems reinstalling and setting up the adobe mastersuite after I have installed windows 8.1. I don't want to have a problem with the serial number still being registered to my old installation of windows that will have been on the same pc.
Thanks for your help!

Your previous activation will still be in the loop, so you should contact Adobe support and ask them to reset your activations. That way you can be sure you have the two your license allows for. You can always skip this if you only activated once before but it will leave you with no extra activation should you find a use for a second installation.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Touch doesn't work after clean install of Windows 7 Professional

Similar Messages

Maybe you are looking for