Touch gestures feature stopped working/disappeared two days ago

I use Photoshop CC on a Surface Pro, and actively use touch gestures experimental feature as part of my workflow. Two days ago, the feature all of the sudden stopped working. I went into Settings, and it's no longer even listed under experimental settings, only the screen scaling and the printing features, two instead of the three that should be there.
Is this something that went away with a recent update (I hope not!), or am I dealing with another issue? How do I get it back? This is seriously impairing my workflow.
Thanks for any help!

Seili010 - Adobe has mentioned that the Touch features are now part of the base Photoshop CC 2014 so no need to turn them on.
HOWEVER
I am running the same setup on my Surface Pro 2 (Win 8.1) and my touch features have stopped working as well. I also have a Surface Pro 1 (Win 8.1) that my backup copy of Photoshop CC 2014 is installed on and the touch features work fine.

Similar Messages

  • Zoom-in, zoom-out pinch gesture stopped working a few days ago for no apparent reason.

    Zoom-in, zoom-out pinch gesture stopped working a few days ago for no apparent reason. I went to Preferences>Gestures, turned off the selection, turned it on again, rebooted, etc. HELP. Any suggestions?

    Try Settings>General>Siri>Off. Restart the phone then go back and turn Siri on again. It can take a few minutes for Siri to totally activate again.

  • Ok my phone was working fine two days ago and it stared to say connent to itunes how do i get it off

    ok my iphone 3gs or 3g was working fine two days ago and it stared to say conniet to itunes can u help me

    Hi agforlife2010,
    If your iPhone isn't responding and is displaying a screen indicating you need to connect to iTunes, you may find the following article helpful:
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • Multi-touch gestures suddenly stop working

    Hi! I'm having problems with multi-touch gestures in browsers such as Safari, Chrome. Suddenly, 'double tap zoom' stops working during browsers use. Also, when I pinch to zoom, pinch to unzoom stops working. I'm using a MBPR 15" mid 2012, OS X Mavericks. These problems stalk me since Mountain Lion. Only reboot helps, but it doesn't solve the problem.

    Try resetting the PRAM.
    Barry

  • My iPad won't load web pages, even though it was working fine two days ago.

    Up until 2 days ago I had no problems with my iPad 3.
    However now it will not load any web pages at all (Using Safari). In order to get it to load web pages I either
    have to reboot or turn it off and then on again. It then connects but only ever to one page at a time.
    I don't understand what the issue is since it was fine before. It is not my Wifi network as it works fine on
    other laptops.

    Try this:
    1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep and Home button down until you see the Apple Logo.

  • I download iTunes and it says it did not download correctly. It was working fine two days ago. I am on Windows 7.

    For some reason, starting yesterday, I tried to open iTunes and it said that it had stopped working and that I needed to uninstall then reinstall it. I did that and each time I have reinstalled it, it says that it was installed incorrectly and to please reinstall.

    Many thanks.
    If that's the only message it's giving at the moment (it's not also giving another mentioning a specific file), I'd try the following document first:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • D700 Tether not working in Aperture 3 worked fine two days ago in Aperture2

    Under Tether Start Session is available however nothing happens when I click "Start Session" The HUD doesn't launch nothing happens. Start Session is still available, but Nothing.

    I had the same problem with my Rebel XT but I figured out why it wasn't working. You just need to select or create a new project (highlight it) then choose "start session". It SHOULD work because that's what I did. Hope this works for you!

  • My Lightroom 5 stopped working a few days ago.

    I get"An error occurred when attempting to change modules". I'm on a a new mac pro OS X 10.9.3. I deleted the nik products and reinstalled 3 times but it stills gives me the error... Any Idea what's wrong ???

    How did you fix it?  I am having the same problem and have spent about an hour online already trying every single fix listed and nothing will work - same problem with a brand new mac running 10.9.3.  Thanks!

  • The "Clear Recent History" setting under "Tools" suddenly stopped working about two weeks ago and is still not working with version 8.0. I am running Mac OX 10.6.8 on a desktop

    Until a couple of weeks ago I could clear my history under the "Tools" setting.
    Now the only way I am able to clear history is to open the history, select all, and then delete---all manually.

    Dear cor-el:
    I did restart in Safe Mode; however, I DID make change in the Safe Mode restart window, resetting to defaults.
    Not only did this not help, but now it is worse, as my history won't show up when I click "Show All History" so I am unable to clear history even manually.
    Did I misunderstand your suggestion? I've been using Firefox with various versions of OX 10 for years w/o such a problem, and now have so many bookmarks on Firefox that I hate to abandon the browser.
    However, I do not wish to have a permanent, unclearable history.
    Below is a screenshot of how the Safe Mode page appeared.

  • Pavilion23tm touch feature stopped working

    I have the monitor set up as a second monitor to a dell all in one.  The touch feature stopped working on the 23tm.  I have updated the drivers and installed the latest Windows 8.1 updates.  What else can I do?

    Hello @jchun,
    I understand that you are having issues getting the touch part of your HP 23TM LCD Monitor to work with your Dell computer running Windows 8.1. Unfortunately, at this time there are no drivers for this monitor listed for Windows 8.1. The only drivers I was able to locate was the HP 23tm LCD Monitor Driver, which is for your monitor on a Windows 7 or Windows 8 computer.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a wonderful day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Two days ago two of the forum I use stopped working as they did. Google Chrome can open these sites without problem. I have checked that Javascript is working. What can I do to get the sites back to the way they were?

    Two days ago two forums I regularly use stopped working properly. One of them is www.mobileread.com, and the main problem is with marking the forums read. The staff there suggested that I check that Javascript is enabled. It is, but the problem remains.
    The other site just looks as though there is no styling on the index page; it just shows a list of links.
    I can use both sites with Google Chrome just as I did before, so it has to be a problem with Firefox.
    There are many other sites I visit, and I have not had the same problem there.

    For the one with a styling problem, see what you have for View > Page Style
    the normal style is default and "No Style" would wipe out styling but in this area it would apply to all pages.
    I don't know of an extension that would selectively turn page styling or off, but look at your extensions.
    Both problems could be caused by filters added to "Adblock Plus" extension.
    Bring up "Open blockable items [Ctrl+Shift+V]" in ADP by right-clicking on the toolbar/addons bar icon or in the add-on's options. See what is being blocked and the filter that is blocking it. You can easily test filters there and turn them on/off and retest. You can see the filter that is blocking an item, you can use the mouse to see where that filter came from. Choices of what columns to display can be made with the little icon to the right of the column headings in the list.
    Attached is a picture of blockable items I see for the www.mobileread.com page. To view a page that you need to view or use, you can try modifying your filters or toggling the "State" column (preferred). You can disable Adblock Plus from the extensions options but that defeats the protection it offers.
    If seems that the problem would be an extension, or a style, or theme.

  • I own an account on iTunes two years ago, almost always used it two days ago, the account stops working do not know why when I open the account Italpin reset your password and resend the email to and I did not receive any Klnh aftermarket tried a lot and

    hi
    I own an account on iTunes two years ago, almost always used it two days ago, the account stops working do not know why when I open the account Italpin reset your password and resend the email to and I did not receive any Klnh aftermarket tried a lot and Amaisalna something please help

    CHANGING APPLE ID/EDIT ACCOUNT INFORMATION/CHANGE ITUNES COUNTRY
    Tap Settings / iTunes & App Stores, then tap the Apple ID signed in. Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID http://support.apple.com/kb/HT2731?viewlocale=en_US
    To edit account information tap Settings / iTunes & App Stores / Apple ID: / View Apple ID
    To change your iTunes Store country, sign in to the account for the iTunes Store region you would like to use, tap Settings/iTunes & App Store/Apple ID/View Apple ID/Country/Region
    Read this article for information http://support.apple.com/kb/HT1311

  • My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

    My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

    My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

  • Touchsmart Touch features stopped working on my replacement TM2 laptop. Second time.

    Touchsmart Touch features stopped working on my replacement TM2 laptop. I have an extended warranty, but HP's website does not see it. It only lets me call in for help. I called in, spent 30m on hold, and hung up in frustration. I am sick of HP's craptastic quality control, whether in midrange servers like the DL-585 or on consumer products like the TM2. Every time I try and use an HP product in our data center or office, it ends up embarassing me. When we try and get support, HP makes every effort to make it difficult either on the web or online. Do I seriously have to escalate to our district manager every time? I'm beginning to think HP is a vendor best left off the candidate list for future purchasing. There's easier and more fun ways to waste my time.

    My problem has been resolved on my next start up. Not sure what triggered the fix, but when I started up and during the Window start up image I pressed in sequence both DEL and ESC (I read something on another forum somewhere). May have had nothing to do with it, maybe the restore triggered?? but somehow when it started up it ran a sequence of fixes (A quick pop up said running .. of 13,000 updates), then the touchpad etc was working again.
    My machine is runnning the standard windows 7. Just to answer your question there is a option under (control panel / Hardware & Sound / device & printers / right click keyboard settings) that checks the drivers.
    Thanks for your help.
    Cheers

  • CS3 stopped working on two imac's

    Hi I really need an Adobe CS3 expert and a Mac expert's help. I have been troubleshooting two days without luck. I have been in the forum trying to solve the mystery shutdown of my CS3 software. I have an imac 2006 with Snow leopard 10.6.8.
    details:
           Model Identifier:          iMac8,1
           Processor Name:          Intel Core 2 Duo
           Processor Speed:          2.8 GHz
           Number Of Processors:          1
           Total Number Of Cores:          2
           L2 Cache:          6 MB
           Memory:          2 GB
           Bus Speed:          1.07 GHz
    My daughters also have an imac (newer like 2010) and since I have two educational edition's of Adobe CS3 One is WEB the other is Design Premium. At one time I had both installed on mine, then put Design Standard on my girls computer to let my artistic 17 year ols use Photosshop for school.
    Everything has been working great untill two days ago, while in Photoshop on my computer, no error message has been seen.
    It  stopped working, the cursor became a pin head, and all options grayed and must force quit to close. Dreamweaver, Illustrator and InDesign are also no longer responding, all options grayed, and no when you open any of these a blank box pops up titled  Adobe Creavtive Suite 3 Web Premium that only has a yellow reduce function on it, or on my kids mac the box says Design STD.
    First I installed istat pro, thinking its a memory thing. (and it still might be, but I dont fully know what to do. istat pro said I have 195 GB left, so I made room - After uninstalling the CS3 I had about 203GB on my hard drive before I reinstalled. )
    I tried to reinstall, also uninstall and reinstalled. Repeated uninstall/ reinstall with cc cleaning, re booting after each step.
    I called Adobe thinking they cut me off, since ironically both computers are doing the same thing! They said they wouldnt do that. I never registered my products but have both products theS#. The person who I spoke to entered in my S3's yesterday. She said reinstalling should work.
    When I reinstall I am not asked for Serial numbers.
    Last night I uninstalled, cleaned, and then restored software from Monday. Same thing is happening. AGH!
    If was was making a living using these software products I would sign up to use the new CC. but because I am in the learning stage, I just want my CS3 back.
    Looking for a saving grace. Thanks for your help!
    Catherine
    Message was edited by: Catgus

    Thank you SO much!
    (and last night the Adobe support took my Serial numbers, so I hope that can't bite me in the butt somehow).
    The thread you directed me to still worked and you have made my day.
    So very grateful!
    HappyThanksgiving to you!

Maybe you are looking for