Touch ID does not work for ONLY MY fingerprints on my phone?

I'm on an iPhone 6 Plus 64gb running iOS 8.3. I have tried many things to resolve my issue, I have restarted the phone, deleted fingerprints, restored my phone, and everything else the apple support team has told me to do.
About a week ago, Touch ID became very hit and miss, I deleted the print, and when trying to redo my fingerprint it would not recognize it. I tried all of my fingers, from here, I reset the phone, restored the phone, and then had a friend do it. They had no problem registering their fingerprint and unlocking my phone, but mine doesn't work at all. However, on other peoples phones, I can register and use Touch ID flawlessly. I made sure my fingers are try and that the iPhone screen is clean.
Can anyone help? Apple tried to replace it, but if it works on other people, it must not be the hardware!

KC7GNM wrote:
Did you follow the directions on adding your fingerprint? You have to do it from different angles and not the same way everytime while adding a fingerprint.
This information is not correct. You do not have to enroll a finger with different angles. Properly enrolled, a finger will unlock from any angle, thru 360 degrees...

Similar Messages

My touch pad does not work only when using Safari browser. The screen was grey. Help!

My touch pad does not work only when I use Safari browser online. The screen was grey. No matter what I do, there is no reponse. Only the web address box works. What is this problem? I can use App Store and everything else fine.
Someone please help.
Thanks

I would try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and delete cache, history and cookies.

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this?

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this? If not is there any way to actually get a genuis appointment lol to get one of them to have a look at the hardware on the keyboard?

Apple Support (formerly ExpressLane):
https://getsupport.apple.com/GetproductgroupList.do
https://getsupport.apple.com/GetSASO?SG=SG001&locale=en_US

The earphone port on my ipod touch 4 does not work anymore, will I need to send it in for repairs?

The earphone port on my ipod touch 4 does not work anymore, will I need to send it in for repairs?

Apple will exchange your Pod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like this one is less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

My nokia c6-01 touch input does not working

touch input does not working
Solved!
Go to Solution.

I have the same problem with the touch screen not working. but only some parts of the screen is not able to respond to my touch.
i am able to select some icons but not others. for example when i turn the phone to on its longest side and using the keyboard to type a sms the length of keys "e" "d" and "c".
there are other parts of the touch screen that dont work.
is this a hardware problem or software.
taking the battery out does not help.

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

HT1414 touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod

touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod, can anyone help or what is the cause

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

CF10 64bit Apache connector (mod_jk.so) does not work for Apache2.4.3 (windows)

CF10 64bit Apache connector (mod_jk.so) does not work for Apache2.4.3 (win64), where can I get a module that works?
I get this error from Apache :
C:\www\Apache2.4\bin>httpd -t
httpd: Syntax error on line 741 of C:/www/Apache2.4/conf/httpd.conf: Syntax error on line 2 of C:/www/Apache2.4/conf/mod_jk.conf: Cannot load C:\\ColdFusion10\\config\\wsconfig\\1\\mod_jk.so into server: The specified procedure could not be found.
I have already tried manually extracting the pre-built mod_jk22.so from the wsconfig.jar with same results.
If I switch to Apache 2.2.22 64bit, it does work. what I need is to be able to run on Apache 2.4.

Please check out this link.
http://rob.brooks-bilson.com/index.cfm/2012/2/21/Installing-ColdFusion-10-with-Apache-on-W indows
In this link, they are configuring with Apache 2.2 only.
When we were working colfusion 9 with Linux and apache, we had the same problem, it will work when it connect to Apache 2.0 but not with Apache 2.2 version.

SM36/37: Specification "After Job" does not work for Daily "periodcity"

I reviewed http://help.sap.com/saphelp_nw04/helpdata/en/20/2d513897110872e10000009b38f889/content.htm, which states what I am trying to do should work, but it does not.
Here's the deal:
1. I have two jobs: "A" and "B".
2. "A" runs Daily.
3. I set-up job "B" to run "After job" "A" in my SM36 definition.
Job "B" will run the next day, but never runs again after that even though job "A" continues to run "Daily" as it should.
Further info:
1. We have "Event-triggered" jobs that run fine, but the "After Job" designation doesn't seem to work ongoingly.
2. I can review both jobs "A" and "B" for any "Predecessor" or "Successor" jobs, and, the first jobs to run after the initial set-up DO reference each other (in other words, let's say I schedule job "B" to run "After job" "A" on Tuesday. After Tuesday's run, Job "A" sees job "B" as it's "Successor" job and job "B" sees job "A" as it's "Predecessor" job), but the definition doesn't last into the next day ONLY FOR JOB "B" (as I mentioned, job "A" always runs fine).
3. I can't set the "periodcity" for job "B" because, once I flag it to run "After Job" "A", the "period" options disappear.
4. One final tidbit: the variant for job "B" has a "key date" specified so the date is dynamic for each day the job runs. I can set up job "B" to run "Daily" with this variant and it runs fine, but I wanted it to run AFTER job "A" so it never runs if job "A" doesn't run. (At this point, it's becoming a matter of principal!)
Here's my question:
Why won't job "B" continue to run "Daily" after job "A" (a "Daily" job) runs?
Thanks in advance,
Lara

Please close this thread since you posted the same question here:
[SM36/37: Specification "After Job" does not work for Daily "periodcity"|SM36/37: Specification "After Job" does not work for Daily "periodcity";

7.1.2 update failed. Now my iPhone 5 is in recovery mode and hard resetting does not work for me. iTunes also will not detect my phone now

I did my 7.1.2 update via iTunes. Half way through it stopped working saying it does not detect my phone. Now my iPhone 5 is in recovery mode and hard resetting does not work for me. iTunes also will not detect my phone now

Thank you SO very much for posting this. I had the exact issue with my iPad Mini after the same upgrade. Hard reset failed, computer would not recognize iPad. I had read all the other instructions and nothing worked.... YOUR SOLUTION WORKED FOR ME - with a slight variation.
I followed your lead and connected my iPad Mini to another computer, fired up iTunes, it saw the iPad Mini in Restore Mode and allowed me to go into Restore (yes, it wiped all of the data but I have a back up on the other computer that would not see it after the failed update). It installed the latest iOS 7.1.2 as well. I then disconnected it from that computer, reconnected it to the computer that would not see it prior and it then saw it as a new iPad and allowed me to Restore my backup and now it's all good!
I detailed my steps only because you downloaded the previous version - 7.1.1 whereas I downloaded the latest version (7.1.2) and then restored my back up.

HT1212 My iPhones screen is broken(a black screen and the touch function does not work). I want to back it up, however I can't unlock it. I don't need to fix it, but i do need the information back up to new iPhone. How can i back it up?

My iPhones screen is broken(a black screen and the touch function does not work).I want to back it up, however I can't unlock it. I don't need to fix it, but i do need the information back up to new iPhone. How can i back it up?

i don't see a way for you to back up your phone, because it will require you to unlock the phone.

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides screen is ok. Is there a way around it? :(

I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides the screen is completely fine-the screen will not recognize my finger anymore. I am not trying to fix the phone, but I need to have my contacts. The pictures have already synced, but I need my password to do a full backup. Unfortunately, I can't type in my password. Is there any way around it? If I take my phone to the apple store, will they be able to help me? I am not willing to replace the screen just to do this, however, so that is out of the question.

Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
~Lyssa

HT5557 The ibooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?

The iBooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?

I went to the Audio store to see about getting a surround sound and the salesperson asked me why I wasn't using AirPlay, he said it was better than the Bluetooth, better quality. So I do have AirPlay on my Sony and I installed the app on my iPhone 5 but they can't find eachother.......when I try looking for my iPhone on my receiver it does not show it. The Sony display works through my TV, the set up screen is there but it says no devices found. Like I said, the Bluetooth finds the iPhone and works ok, but the AirPlay does not.....looking at the manuel it says that the AirPlay will recognize my device (iPhone 5) but it does not..........

Touch ID does not work for ONLY MY fingerprints on my phone?

Similar Messages

Maybe you are looking for