Touch ID not working with App Store or iTunes Store.

Touch ID is working fine to Unlock my phone. But it won't pop up when I download something on App Store or iTunes Store. I have it on on the settings but it doesn't even pop up it just tells me to type my password. It used to pop up and tell me to scan my fingerprint but now it doesn't say anything.

Hi,
Glenn from Sweden here. I'm new to this forum and can't see if this have been solved yet, but the following worked for me:
Go to
Settings > General > Touch ID & Password > Touch ID > iTunes & App Store
If the slider "iTunes & App Store" is already set on "On" then slide it to "Off" and turn it back on again. You will now be prompted to enter you App Store password.
Now it should work to purchase apps with a touch of your fingerprint.
Hope this helps :)

Similar Messages

  • My iPod Touch is not working with Bose SoundDock.  How can I fix it?

    My iPod Touch is not working with Bose DoundDock Series II.  Can anyone suggest how I can get these 2 to work together?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      
    Apple will exchange your iPod for a refurbished one with a new battery for $79 Y can do the exchange at an APple store or sent it in.. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following will replace your battery for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the battery yourself if you are up to it. Y can purchase a eplacement battery for about $10
    iPod Touch Repair – iFixit                  

  • My ipod touch will not let me connect to the itunes store and i am using a wifi connection

    My ipod touch will not let me connect to the itunes store and i am using a wifi connection

    allison i had the same problem to but then i figured out! You have to put in a credit card number so you can purchase a game thats free or 0.99 cents or higher then you have to fill in other stuff then press next on your ipod touch or computer then it says you have succesifully created an apple id! And i hope this information will help out!!

  • IOS 8.3 : Touch ID not working in App Store

    Hi All,
    After updating my iPad to iOS 8.3, Touch ID is not working in App Store.
    Has any one else noticed the same....? Any workaroun/fixes?
    P.S. Touch ID is enables for iTunes & App Store in settings.
    Regards,
    Srireddy

    Touch ID for App Store is working now...
    Looks like it was a server fix...

  • Touch pad not working with HP G60 operating on Windows 7

    I have a HP G60 operating on Windows 7 (not sure bit) and have problems with touch pad not working.
    I was using touch pad and wireless mouse interchangeably for past year.
    No recent changes made to system. Suddenly not work one evening. Have tried shutting down and left overnight which has not resolve problems.  On one occasion, i was not even able to type and that resolved after re-starting computer.
    There is a button between space bar and top of touch pad which is white. Even when i press and turn red, it has not changed situation. Therefore I have to use my wireless mouse to operate for the moment. 
    Would appreciate any advice about what is the problem and ways to resolve it.
    Thanks a lot!
    Mo

    Hi,
    The numbers are fine
    Try the following.
    First, ensure the Touchpad is switched on ( the light between the Touchpad and the Spacebar should be white ), then download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp44501-45000/sp44940.exe
    Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
    When this has completed, shut down the notebook, remove any external devices connected to the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    When windows has fully reloaded - it will automatically load a generic driver for the Touchpad, but just let it do this.  Then open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My 4th gen iPod Touch does not work with Ford sync since updating OS

    When I updated my iPod to the new os, it does not work with my ford sync system anymore. how do I fix this?

    Have lots of issues with Fords MySync and here's some info that might help....
    Using ford sync interface, goto the phone section, then settings, and look if your iPhones name is listed, if so select the phone name thru sync interface and remove/delete it from the sync list, then go thru the Bluetooth pairing process again.
    If that doesn't work, do the same on the iPhone, select ford sync entry in Bluetooth and remove sync or forget this device on the iPhone and then go thru Bluetooth pairing again.
    If that doesn't work Power off iphone ( not sleep) hold power button till you see red slider to power off. Then restart iphone, try pairing up again.
    If that doesn't work go back to MySync and goto phone settings and use the up-down slider till you see sync master reset. Confirm then go thru BT pairing again.
    If that doesn't work there is a fuse for the my sync system. Fuse box is usually behind kick panel of front passenger seat side for the Mustang #3, its behind a paper black cover. Remove fuse for 5-30 secs then replace.
    Lastly, make sure your MySync Firmware is the latest vers. Mines 4.0.2 goto fords MySync support page to check
    http://www.ford.com/syncmyride/
    or call 1-800-392-3673 Opt 3
    A google search might help for your model and year if not a newer mustang and you couldn't get to ford.
    Good Luck

  • IOS7 will not work with current version of iTunes

    My phone has had a recurring problem with the mic not working unless the phone was in speaker mode. I haven't bothered to update to iOS7 before now, but finally got annoyed with not being able to have a phone call in public, so I attempted to restore (which several posts on the topic recommended). Connected phone to iTunes, backed up, clicked "restore", got a pop-up saying that it couldn't restore the phone because I was still running iOS6.
    Figured, what the heck, iOS7 can't be that bad, decided to update. All the while, my phone was connected to my computer, which is running iTunes version 10.6.3. Not once did I get any sort of warning, notification, pop-up, anything letting me know that iOS7 was not compatible with this version of iTunes. Since my phone was pretty much out of memory, I actually deleted all of my music so that I could download the update, knowing that it would be able to be replaced as soon as the update was finished. Waited for the update to download and install, clicked "Sync" on my computer, there's my pop-up. Attempted to download iTunes 11, won't let me because my computer is still running Mac OSX 10.5, because I don't feel the need to buy a new laptop every 2 years.
    My computer was purchased (new) in '09, not even a full five years ago. I understand that Apple changes constantly, but the fact that I now have NO way to restore my phone, NO music, NO way to back my phone up without a wireless connection, is frankly a pile of crap. I can't even talk to tech support about this without paying $19 for an internet conversation because I purchased my phone 13 whole months ago.
    I've been a huge proponent of Apple ever since I got my computer. I've recommended them to countless friends because my computer has lasted five years without a single problem, no significant slow-down, etc. It's great to find out that the fact that Apple made such a great product is the same fact that's causing me to have to write this long, drawn out, very livid post that is essentially a giant plea of: short of getting a new computer (because um, no, I'm not doing what Apple wants and spending more money so that two products made by the same freaking company are compatible), how do I restore my phone and get my music back? I know that anything purchased on the iTunes store can be downloaded to my phone, but the vast majority was from CDs.

    cynecasey wrote:
    ... my computer is still running Mac OSX 10.5, because I don't feel the need to buy a new laptop every 2 years.
    You have written a very long story, and I admit I have skipped most of it.  But I think the question is you are on iOS 7, and cannot get the latest version of iTunes (11.1.5) on your computer because your OS X is too old.
    The fact that you chose not to update your hardware does not mean you could not update your software!
    OS X 10.5 is very old (about four years).  iTunes 11.1.5 (current version) requires at least OS X  10.6.8 to run.  Very likely, you could upgrade your computer's software to at least OS X 10.6.8 and then download the current iTunes on it.
    You would start here:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Then you would update the OS X 10.6 to OS X 10.6.8 over the air, then download iTunes (or update to a later OS X, as the current version is 10.9.2).

  • Touch id not working with iTunes and App Store

    Touch ID will work to unlock my phone, but not with iTunes or App Store. It keeps asking for my iTunes password. I have turned on 'Use your fingerprint instead of your Apple ID password when buying from the iTunes & App Store'. I am running IOS v7.0 (11A466)

    I was having this issue too, it was always asking for the passcode even though the setting was on for iTunes & App Store. To fix it I turned it off and then back on again, it asked for my password and then it worked.
    Steps:
    - Go to Settings -> General -> Touch ID & Passcode -> Touch ID
    - Disable iTunes & App Store
    - Re-enable iTunes & App Store
    - Enter your passcode one last time
    - It should work
    Also as others mentioned, under General -> Restrictions -> Require Password might need to be set to 15 minutes.

  • My apple id do not work with app store and itunes it say's this apple id has not yet been used in the itunes store?

    please help me guys, and thank's in advance for the help..

    On your computer, iTunes>Store>View My Account>Apple ID Summary>Payment Type...you need to make sure your credit card info is correct/entered here. If you don't have a credit card, follow these directions:
    http://support.apple.com/kb/HT2534

  • Ipod touch equalizer not working with radio

    My first Apple device just purchased today.  The ipod Touch 8GB Generation 4.  The first thing I did was downdoad Tunein to listen to radio.  I noticed the preloaded Apple equalizer with presets does not work.  Is this normal with radio or this app.  Does the equalizer only work with itunes music player?  Thanks

    It's a bookshelf stereo system with an output channel so I have a Logitech Jukebox Internet Radio hooked up to it and it works fine but the iPod Touch ..... nada happens when I plug in the output cable to it. 

  • Touch ID not working with Apple Pay.

    I have an iPhone 6. The Touch ID works great to open the phone, log in to App Store. All my fingers work with it. But when I use it at a retailer that takes Apple Pay, it won't accept my fingerprint. I try every finger and eventually it prompts me to use my passcode to make the purchase.
    What is wrong with it?

    Hi ...
    It's possible the sensor is smudged since you are using multiple fingers.
    See: Clean the Touch ID sensor here >  Use Touch ID on iPhone and iPad - Apple Support

  • App Update not working-says "Cannot connect to iTunes Store"

    Hi, 3G S iPhone here, 3.1.2, with iMac on Snow Leopard.
    I have the exact same issue Forrestranger has on my iPhone: I have free Apps which will Not update, and despite entering the correct iTunes Password (I'll prove this shortly), I am told I "Cannot connect to the iTunes Store".
    I've read Forrester's thread, and I'm fairly certain this is not an ISP issue or wrong password issue. Here's Why:
    - I HAVE recently had Apps (I can't remember whether they were free,...sorry) that DID UPDATE successfully EVEN AFTER I entered the password and was told that I 'Cannot connect to the iTunes Store'.
    Yes you read that correctly. I got the same message that seemed to halt things but then the App Update installed anyways.
    I have written one of the App Developers too to see if they can help. I appreciate any ideas or tips here of course.
    Many Thanks, Frank B.

    Sign out of your account, restart the iPad and then sign in again.
    Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign in and then try to update again
    If that doesnt work - go to Settings>General>Date and Time - set the date ahead by a few months. Try to update again. If you get an error message of any kind - go back and change the date and time to automatic again. Then try again.
    If that doesn't work, restart your router and reboot the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • 1st gen ipod touch will not work with new iTunes 11.help!

    1st generation Ipod Touch.  I ran an update on my ITunes on my PC, and my IPOD will no longer connect to my itunes.  Please help.  If at all possible.

    iTunes 11 works with all model iPods.
    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    iOS: Device not recognized in iTunes for Windows

  • IPhone, iPod Touch will not work with Skullcandy Icon2,  Icon 2

    I pulled my Skullcandy Icon 2 's out for my ski trip and found that the mic and control had stopped working with my iPhone. Thinking that the Mic/Button had broke I went out and picked up a new pair, which also didn't work.
    Both sets of head phones were tried on an iPhone 3g, iPod Touch 1st Gen. and iPod Nano 3rd gen. None of which would allow control of the devices in music mode or call answer.
    To rule out a defective headset, I connected them to my friend's phone, a HTC Hero. The controls on the Icon 2 would play and pause any music program, including Pandora including controlling calls, (answer, mute and hang up).
    I haven't found anything other then lint in the head phone jack to as a solution to this. (not a solution for me).
    If anyone has any suggestions please let me know.
    Hardware Info:
    Skullcandy Icon 2 Purchased 2009-2010
    Skullcandy Icon 2 Purchased 12/2/2010
    iPhone 3g Software version 4.2.1
    iPod Touch Software version 3.1.3
    iPod Nano 1.1.3

    Has this worked for you in the past? I am under the impression that your units are older and do not support this functionality. See <http://support.apple.com/kb/HT3310>.
    I'm interested in what you find out
    Allan

  • U430 Touch: wireless not working with windows 7

    My friend bought a U430 Touch with Windows 8. He hated Win 8 so I helped him downgrade to Win 7. Now the wireless dowsn't work. Ethernet works fine and we are able to get on the internet, but wireless does not work at all. I've been to Lenovo's site and downloaded the drivers from their support site, but nothing weems to work. Is there a special driver I'm missing?
    Solved!
    Go to Solution.

    It's possible that they are shipping with Intel only at the moment, but the Hardware Maintenance Manual lists two non-Intel cards: a Liteon, and a "non-Intel", whatever that means.
    Just sayin'
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Maybe you are looking for

  • How do I create a chat in my server?

    I am building an mmorpg game and one of my first tasks is to create a chat, now I have no idea about how it is working. The only thing that I do know is that there is two ways to do it, one of them will force me to update my chat page all the time an

  • How to find the JAR files of a custom portal service?

    Hi all, I have created and deployed a custom protal service on to the portal. Now for any of the other apps to make use of this service, i need the JAR files which correspond to this portal service. Where do I find them?? Regards, Narahari Message wa

  • Filesystem related queries

    Hello friends I have two quries. 1)is there anyway to read SMS content as well as find number of files[audio/video etc] in file system? 2)some sorta notification API which could notify when new file[of any type] was added /removed? Thanks

  • Question related to INSERT statement

    Consider this scenario: - table_a has 5,000,000 records at time t1 - table_b is empty at time t1 - At time t1, I execute the following statement:           insert into table_b             select * from table_a;     - The insert statement finishes at

  • Forms Error Message Documentation

    Dear Colleague, Could someone please give me a link to documentation that contains the explanations of the Forms Error Messages, e.g. FRM-99999 etc. I have not been able to find it in OTN. Kind regards, Randy