Touch ID on iPhone 5s does not work
What can I do to get this feature to work again ?
Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.
Similar Messages
-
Hello, I've got a question about my Iphone 3gs. Well one day i woke up and i tried to slide to unlock my phone but the touch was unresponsive. So, i turned off my phone and back on, the unlock screen came back one and same problem happened. The only time the touch works is when I slide to turn off my phone. When people call me, i can't answer. When people text me, I can't answer. I do have the latest update for the phone. I've looked everywhere on the internet and have got no answers. I have dropped my phone a couple of times and it does have some cracks on the screen. Please help!
Your only chance besides getting it serviced would be setting it up as new device:
http://support.apple.com/kb/HT4137 -
i've noticed a touch ID only works with my iPhone six is not plugged into the wall was soon as I plug it in it doesn't work anymore doesn't even register fingerprint.
Charger60 wrote:
i
Touch ID in my iPhone six does not work when it's plugged into the wall is anybody else having this problem?
No. You are the only one. The way I know is that I don't have the problem, therefore no one else can have it.
Seriously, no matter what problem you have, with a half billion iPhones in use, someone else will have the same or similar problem. So knowing that doesn't help solve it in the slightest. As it's new and still in warranty I would take it to an Apple store. Make a genius bar appointment first so you won't have a long wait. -
WiFi iPhone 4S does not work after update iOS 6.0
WiFi iPhone 4S does not work after update iOS 6.0
This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty? -
Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything possible
Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything what I could find in the interenet as solution??????
IPhone 4s, iOS 7.1.1: iphone can't connect to wahoo HR BT4.0 sensor :((( Wverything worked fine with iOS 6 !!!
-
what should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem
If there's a hardware defect and your phone is under warranty, bring it to Apple for replacement.
-
Air 2.7 and MacOs Lion: iPhone packager does not work
hi. After upgrading from Snow Leopard to Lion the iPhone packager does not work. It throws an error concerning the Application Version Number. Is this a Know bug? Is there a work- around? Thanks. Michael.
Yeah sorry, the start of my descriptor looks like this:
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<application xmlns="http://ns.adobe.com/air/application/2.7">
<id></id>
<versionNumber></versionNumber>
<filename>d</filename>
<description/>
<name></name>
When I go to compile the app the compiler inserts that line into my descriptor at the very bottom (just before the application tag closes). It's weird, I tried setting the <application xmlns="http://ns.adobe.com/air/application/2.7"> back to 2.6 and it works and seems to compile in 2.7 (as I noticed the timer bug).
Anyway, I only tried 2.7 because I heard the GPU fullscreen bug had been fixed, but given that the timer issue still remains I'll go back to 2.6 for the time being.
Thanks -
Hi, My iPhone 4s does not work properly with the sound.
Hi, My iPhone 4s does not work properly with the sound. It just ring. Any other app it doesn't make sound unless I have my headset or bluetooth. And it make me choose between "DOCK CONECTOR" or my "APPLE TV". Why? Or any sugestion plz
Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy -
My iphone 5 does not work properly with Ford Sync,
Hi, My iphone 5 does not work properly with Ford Sync, everytime I pair the phone, Ford sync navigation system freezes and does not work !
Can someone help.Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy -
resizing with my mouse using touch pad mac book pro does not work. how can i correct this problem?
See:
* [/questions/777886] -
Back light of my daughter's iPhone 3 does not work anymore, I have tried all settings and even did a hard reset, nothing helps.
Can you help me? Thank you.You usually copy the screenshot to the clipboard and paste that image in an image editor program like Paint. Then you can save the image as a .jpg or .png file.
http://www.wikihow.com/Take-a-Screenshot-with-the-Snipping-Tool-in-Vista
http://www.microsoft.com/windowsxp/using/setup/tips/screenshot.mspx
http://en.wikipedia.org/wiki/Screenshot#Microsoft_Windows -
Upper speaker in my new iPhone 4 does not work. When somebody calls me I hear only strange sounds. Please, help!
A couple of other things you can try -
With my 2010 Ford Fusion (and SYNC) I received the same not optimized message a few times. There were several things I had to do but eventually, I got it cleared up. Not sure exactly how this will translate to your Toyota but maybe it will.
- Try resetting the iPhone via a power off/on or a hard reset where you hold the home and power buttons. Then power back on and plug into your USB port.
- In my case I had an issue with SYNC in my car where I needed to reset the USB port in my car. Not sure if Toyota has something similar. The fact that you said it won't charge makes me wonder if the USB port got disabled in your car. This happened in my car and an easy reset for me was to remove a fuse for a few minutes and replace.
- Update your iPhone in iTunes and resync it there. Then try connecting again in yor car.
- Delete and re pair your iPhone from your Toyota system
Hope something here helps. Thanks -
My Wi-fi iphone 4 does not work pleas help
my Wi-fi iphone 4 does not work pleas help
What troubleshooting have you done?
Can you explain in detail by "does not work" -
My FaceTime works on my iPhone but does not work on my Ipad air ?
FaceTime does not work on my ipad is great on my iPhone help ?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Bluetooth on iPhone 6 does not work with car stereo
I have used iPhone 4, 4S, 5 and 5S on my car - my own and my families phones. They all work as intended with regard to music and most importantly telephony. My car (FORD S-MAX) has buttons etc. for phone navigation. My daughters and wifes 5S's still work.
When I paired my new iPhone 6, the pairing itself was successful, but it does not work at all.
1) Incoming calls show my own telephone number, regardless of who calls
2) I cannot use the car buttons for anything, neither pickup, hangup or anything else
3) Regardless of what I do, the Podcast starts playing, if I choose Bluetooth as sound input on car. If I click pause on Podcast, it resumes after a while, sometimes immediately.
4) If I use the phone to dial a number, the sound is not in the car, even if sound source is Bluetooth/Car. If I select something else and back to car, the sound is in the car.
Hopefully this is soon to be solved! Or is there already a solution out there?
Best regards
Matt, DenmarkMy iPhone 6 pairs just fine with my 07 Z4 ,no idrive etc just the basic B/T install on a Business standard radio set up with e snap in connector for the iPhone
but not yet an iPhone 6 snap in
You may need to ensure you clear all ol pairings from Beemer they have a limited number of pairings that can be stored at one time
To dispel all the bad press my 6 also happily paired with my '13 X1 without any issues and with the correct snap in also plays audio
The issue is usually with iDrive which BMW do have some issues with
Maybe you are looking for
-
How to show weather icon on top screen smb talk
I have bought smartband talk yesterday. I see on review page, on clock sreen, at top,it show weather. But my smb talk,I can't see. Anybody help me? Thanks
-
My iPhone 4S (6.1.3) is not editable in iTunes 11.0.4.4 on my Windows 8 Lenovo (I can't delete songs or the ever-duplicating voice-memos. The only options it gives me are Play "whatever", Get Info, and Show on Playlist) but I can do it with my iPod T
-
Create ADF Task Flow for Human task outside of SOA Composite
Hi, Is there any way you can create ADF Task Flow form (for the task Details to be display in worklistapp) for a Human task out side of the SOA Composite applicaiton?. I know we can create ADF Task flow form for task details based on Human Task in SO
-
Hi, I am explaining the issue by example.Let say we are creating the Sales Order on 1st May and Price of the Material is $2.00. This goods will be manufactured and Shipped by the End of June. Now in the Mean time due to some other reason we are chang
-
PhpBB2 source code does not show in design view /CS3
I would like to customize a php bulletin board. The default bulletin board page does not show in design view. Is there a way to do it , such that php code can be written by DreamWeaver via the design view ?