Touch no longer recognized after updates

I updated a lot of software on the MacBook a few days ago as recommended by Software Update. I guess the latest versions of Snow Leopard and other stuff like iMovie and iPhoto and iTunes.
Today, i tried to sync my Touch and it was invisible. Not even on the desktop. Nothing on the Touch to even indicate it was charging, much less syncing. It worked fine just a few days ago, before the updates. How do i resolve this problem?

Thanks for the attempt, but I think it has to do with the slew of updates. I subsequently noticed that my MacBook now won't recognize my printer, either. there was also the update to Snow Leopard 10.6.3 as well. I believe all the updates had something to do with the iPad release, so the applications would recognize the iPad. Unfortunately, it seems to have disabled the USB ports, or perhaps the drivers for printers and other devices like the iPod Touch and the like. Haven't attempted using the Firewire port yet since the update. I probably should move this discussion to another board since it's something that may well go beyond just an iPod Touch issue. Again, thanks for your kind reply.

Similar Messages

IPod Nano 3G lo longer recognized after Update to iTunes 9 on Vista 32 Ulti

So i updatedt to iTunes 9 yesterday - only to find out that my iPod 3G is no longer recognized by iTunes. Also my 2G are not recognized any longer on this machine
ALL three iPods still work fine with my other computer whicgh is running the same Windows version but has still iTunes 8 installed.
With the IPod service disabled the iPods appear properly as a device - they show their assigned name and you can browse the content.
When the service is enabled and you start iTunes iTunes displays a message that says that it "discoveerd" the iPod but could not identify it
see heer http://0711.diy-punk.net/WOW/ipodfu.jpg
also as soon as iTunes gets involved the device is no longerreadable under Windows
i tried multiple reboots, restart of iPod service, rebooted the iPod, resetted the iPod - nothing helps...
This is the iTunes diagnois (in german, sorry)
Microsoft Windows Vista Ultimate Edition Service Pack 1 (Build 6001)
System manufacturer System Product Name
iTunes 9.0.0.70
QuickTime 7.6.4
FairPlay 1.5.18
Apple Application Support 1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes-Seriennummer 4408A0FF9EFAA0D3
Aktueller Benutzer ist kein Administrator.
Aktuelles Datum und Uhrzeit sind 2009-09-15 18:26:25.
iTunes befindet sich nicht im abgesicherten Modus.
Info zu Video-Anzeige
NVIDIA, NVIDIA GeForce GTX 275
** Info für externe Plug-Ins **
Plug-In-Name: AMIP (stub)
Plug-In geladen: Ja
Plug-In-Version: 0.8
Plug-In-Dateiversion: 0.5.0.0
Plug-In-Pfad: C:\Program Files\iTunes\Plug-ins\ituneswrapper.dll
Plug-In-Name: Last.fm AudioScrobbler
Plug-In geladen: Ja
Plug-In-Version: 0.0.2
Plug-In-Dateiversion: 3.0.2.0
Plug-In-Pfad: C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
Genius-ID: f2f8282b830c835751cb597904744cb8
** Verbindungstests für iPod/iPhone **
iPodService 9.0.0.70 arbeitet zurzeit.
iTunesHelper 9.0.0.70 arbeitet zurzeit.
Apple Mobile Device service 2.50.39.0 arbeitet zurzeit.
Universal Serial Bus Controller:
Intel(R) ICH10 Family USB Universal Host Controller - 3A34. Gerät funktioniert wie vorgesehen.
Intel(R) ICH10 Family USB Universal Host Controller - 3A35. Gerät funktioniert wie vorgesehen.
Intel(R) ICH10 Family USB Universal Host Controller - 3A36. Gerät funktioniert wie vorgesehen.
Intel(R) ICH10 Family USB Universal Host Controller - 3A37. Gerät funktioniert wie vorgesehen.
Intel(R) ICH10 Family USB Universal Host Controller - 3A38. Gerät funktioniert wie vorgesehen.
Intel(R) ICH10 Family USB Universal Host Controller - 3A39. Gerät funktioniert wie vorgesehen.
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A. Gerät funktioniert wie vorgesehen.
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C. Gerät funktioniert wie vorgesehen.
FireWire-Host-Controller (IEEE 1394):
AGERE OHCI Compliant IEEE 1394 Host Controller. Gerät funktioniert wie vorgesehen.
Zuletzt angeschlossenes, jetzt nicht verbundenes Gerät:
iPod nano (3. Generation) mit Firmwareversion 1.1.3
Seriennummer: YM741YNKYXT
** Sync-Tests für iPhone/iPod touch **
Kein iPhone oder iPod gefunden

Yeah... I hope apple solves this problem soon. =\
I use Windows XP instead of Vista...
This happened to me:
I plugged my iPod
Oppened the iTunes, iTunes recognized the iPod with all the songs, album covers, playlists, etc.
It asked for update. (Download & Instal, ok)
Finished the update, oppened the iTunes 9.0. Added a new songs but then I realized it didn't recognize the iPod (wich was plugged.)
I checked on "My computer" and I saw "iPod". Ok.
When I ejected the iPod it was clean. No musics, no Videos, no playlists. Started on the screen "Select your language".
I Tried reinstaling the iTunes but whenever I got an older version it said something like "The iTunes can't be started because the iTunes library has been generated by a new version."
Restarted my PC several times.
Rebooted the iPod.
Tried switching USBs.
NOTHING works.
Nothing at all.
even tryed the manage thing on "My Computer".
If they don't find a way of fixing this bug my iPod Nano is not better than a f**kin' Pendrive... ~.~"
Hope apple do something...

Help! iPhone no longer recognized after update/sync

Help. After months of delaying doing the update for my iPhone 3gs, I finally hooked it up tonight. Well half way through the update an "unexpected error" occured. Now my phone only has the 'connect to itunes' screen. I've tried rebooting my pc and phone. The phone will show the apple then the 'connect to tunes' screen. Now iTunes won't recognize the iPhone and my computer doesn't want to see it as a device. Help! Not sure what else to try, why it happened or what to do. TIA

Try kicking it out of recovery mode with RecBoot. If that does now work, read through section 3 in link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Ipod touch no longer charges after update from IOS 7 to 8.1

Just updated the signed iPOD Touch Product Red my son got for his first communion in June from iOS 7 to 8.1.
Update went fine was done while the iPod was connected to the outlet.
HOWEVER: Now the iPOD is flat and he will nog onger charge or startup, tried 2 different cables and two different charging plugs.
Anyone has this problem, what can I do ??????
HELP ????
From Belgium

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Where the cables you tried known to be good? From other posts it appears that the update made the iPod more aware of marginal cables.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Iphone (original) and ipod touch no longer recognized after 2.0

I have tried it all... reinstalled system, ran utilities reinstalled itunes...nuttin.
Does anybody have a solution?
Problem is any other computer besides my own wants to sync. Already bricked one phone. Apple replaced with a new one still same problem. I hook up and it stalls itunes. If I disconnect phone briefly the summary screen appears and if I am lucky it doesn't wipe out the phone.
Please help!

When I plug in my ipod, a message pops up that says:
"This computer is no longer authorized to play purchased items that are on the iPod (my ipod name). Would you like to authorize this computer for items purchased from the iTunes Store?
>If you do not authorize this computer, 191 songs will be removed from the iPod"
I click "authorize"
Enter my apple ID (note that for some reason it keeps bringing up an apple id from 2006, even though the computer and ipod are from 2011 and 2010.)
Then it says "this computer is already authorized"
And every time I plug it in, the same thing happens.
Sorry I wasn't clear before.

HT201371 Touch ID stopped working after updating to IOS 7.1.

Good morning to all,
My touch ID stopped working after updating to IOS 7.1.
It was working perfectly until the update and then it stopped recognizing my prints
I've reset the phone and deleted my fingerprints and now I can't even add a fingerprint again.
I am sure this is not a hardware problem since the phone was working perfectly before the update and it didn't fall nor anything similar.
Also the sensor is clean as well as my fingers.

Same problem... I think we all should let Apple know of this issue. http://www.apple.com/feedback/ tell them the probelm. So when they get too many complains they will surely fix it ASAP with a software update.

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Locate Me on Maps no longer works after updating to 2.0.1

Locate me on my iPod touch worked EXTREMLEY perfectly on iPod touch 2.0, but after updating to 2.0.1, it stopped working....
My wi-fi hotspot was already registered to skyhook before updating to 2.0 (or as matter of fact, 1.1.2 update) so it's not skyhook's problem....
any solution?

Hi,
I upgraded to 2.0.1 on 6th or 7th August and discovered that the Google Map's Locate Me stopped working on 8th. I did not try it on the day I upgraded, but it was definitely working fine prior to the upgrade.
I've found and posted in this thread as well. Many others are having the same problem.
http://discussions.apple.com/thread.jspa?messageID=7828692
Yesterday, out of desperation, I switched my iPod Touch into DFU mode and loaded Firmware 1.1.4 onto it. Didn't work either. The upgrade appear to have broke something badly.
It's now 11th and it's still not working for me either.
Regards
CK

Ipod Touch 5 will no longer sync after update 7.1.2

After updating from iOS 7.1.1 to 7.1.2 my Ipod touch 5th gen no longer syncs with my iTunes 11.3.1.1 when connecting it to my computer (windows 8.1) what comes up on my touch's screen is "trust this computer?" I press the "trust" button then a few seconds later I get the disconnected tone from my computer and nothing else happens (it still charges) and just checked it out on my Windows 7 computer (iTunes 11.3.1.2)and it recognized it fine (but the other computer has my playlists) I've tried updating to iTunes 11.3.1.2, updating iPod drivers and uninstalling then re-installing iPod drivers and iTunes is still not connecting to my iPod. Help please.

On your computer go to the control panel (hover in the lower right corner) then programs, add/remove programs
Uninstall iTunes, Apple Mobile Device Service, Apple Application Support then go to apple.com and redownload and reinstall iTunes and try again.
You won't lose any content, you're not deleting that, just the programs that access them.
What is thought to happen is that sometimes a new version of itunes doesn't update the drivers in those other two programs. The only way to update the drivers is to force it by uninstalling the programs which allows itunes to write the correct ones.
My iPad and iPod did exactly the same thing and this is how I fixed it.

My Local Adjustment Brushes no longer recognized after LR 4.3 update

After running 4.3 update, my local adjsutment brushes are no longer recognized and appearing in the Lightroom GUI. They are all still located under 'Lightroom' folder --> 'Local Adjustment Brushes' folder (nothing has changed and I see all files are still there in Finder), but no matter how many times I've restarted LR, they are not showing up in the GUI.
Please advise ASAP!! Thank you

It's not clear from your initial problem description, but are you talking about local adjustment presets that you have created yourself (i.e. user presets), or are you talking about the standard presets supplied by Lightroom (Burn, Dodge, Soften Skin, etc)?
If it's the latter, go to Preferences>Presets Tab and click on "Restore Local Adjustment Presets".

USB Hard Drive no longer recognized after SW Update

I just updated Cisco software and my external hard drive is no longer recognized by Cisco. It is a Seagate drive that is listed on the Cisco tested - passed - approved list. It worked prior to this update. I have disconnected the drive. Reconnected it. Rebooted. Turned machine and router on and off and its still not recognized. Any ideas? Thank you, Jim S.
Model name: Linksys E4200
Model number: E4200
Firmware version: 1.0.03 build 14
Operating system: Windows 7 SP 1
Software version: 1.4.11266.0
Connection type (WAN): DHCP

It's great to hear that everything is back up and running.
However, just in case you missed some step while upgrading Cisco Connect or Firmware. These are the steps.
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=cd2cb366ce254f51a5bed7539b068fed_Updating_Cisco_Co...
Link to download latest version of Cisco Connect & Firmware.
http://homesupport.cisco.com/en-us/support/routers/E4200

Ipod touch no longer recognized by itunes

All my apple products, iphones, ipad work and are recognized by itunes but with updates the ipod touch is no longer recognized. Followed what instructions I could get through apple but still cannot resolve problem

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Firewire drive no longer recognized after upgrade?

having an onset of problems the last 2 weeks.
first upgraded to 10.4.6 on mac mini 1.42 non-duo, worked a few days than acted weird with apps crashing. had to reinstall from 10.4 disk. seemed ok. repaired permissions, ect. after reinstall (and a subsequent power outage) a firewire drive attached at time was no longer recognized by mac mini or connected imacG3. reinstalled 10.4.2 on mac mini. installer unable to reinstall 10.4.6., I would like to have firewire drive recognized again. when attached to other firewire drive in daisy chain, says device unrecognized, other wise unable to get any info on drive. what to do?

I am having nearly the exact same issue as you are experiencing. My Western Digital Dual-Option Media Center 160 GB FW HD is going in and out big time. It seems to be there for a time but then conks out. I have to disconnect the power and now the drive seems to be malfunctioning.
Same story with my LaCie 52x CD Burner. I placed the Disk Warrior CD in there and the computer recognized the disc at first but then spinning beach balls galore!
This has to be one of the worst updates to an OS X system I can remember. I can only think PowerPC QA testing has gone through the toilet since the Intel move was completed.

Canon iP2700 is no longer working after update

My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2 from https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
tail -n 100 -f /var/log/cups/error_log
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
The CUPS ownership of the USB device file seems OK:
ls -l /dev/bus/usb/001/006
crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
EDIT
I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
Last edited by otx (2012-03-09 14:21:27)

See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

IPod Touch No Longer Syncs After Upgrade to 10.8.3

I recently upgraded my computer from OSX 10.5 to 10.8.3. But while my iPad seems to sync fine, my iPod touch no longer syncs and it is not recognized by the Apple store. Please help!

When I plug in my ipod, a message pops up that says:
"This computer is no longer authorized to play purchased items that are on the iPod (my ipod name). Would you like to authorize this computer for items purchased from the iTunes Store?
>If you do not authorize this computer, 191 songs will be removed from the iPod"
I click "authorize"
Enter my apple ID (note that for some reason it keeps bringing up an apple id from 2006, even though the computer and ipod are from 2011 and 2010.)
Then it says "this computer is already authorized"
And every time I plug it in, the same thing happens.
Sorry I wasn't clear before.

Touch no longer recognized after updates

Similar Messages

Maybe you are looking for