Touch no longer works after replacing screen for Yoga 2 Pro

Screen was cracked so I replaced the screen. Now touch doesn't work.
There is no "Pen and Touch" and "Tablet PC Settings" in Control Panel. In PC info it says, "No pen or touch input is available for this display."
Touch DOES work on LENOX as I ran it from a usb drive, so it is not a hardware problem.
I have reinstalled Windows.
I have another Yoga 2 Pro and comparing Device Manager in both I see no differences.
How can I get the touch to work again?

ColonelONeill wrote:
Does uninstalling and reinstalling the touch screen device under Device Manager get it to show up?
Well, I did update the display adapter and the HID-compliant touch screen driver, and a host of other drivers. Also did a reinstal of windows from system restore, but I guess as far as specifically uninstalling and reinstalling the touch screen device, I guess not.
I sent the laptop to the company who I bought the screen from, (Laptop Repair 365) because they said that they would fix it for free. I sent it yesterday and they already got it today and said they fixed it.
I asked what was wrong and they said a falty screen and they replaced it under warrenty for free. Great company!
I still don't understand. The touch worked when running linux so how could it be a falty screen?

Similar Messages

IPad 2 side buttons no longer work after switching screen

My screen got cracked 4 months ago, but I still used it perfectly fine. Last week i paid a guy to replace my screen, after which, the side buttons (top switch, screen lock/mute, and volume buttons) stopped workiing. The home button is the only button that works. What is causing this and are there any apps i can download that can lock my screen with (so i can tilt is sideways without the screen shifting)? BTW, the guy who did the job said it's not his fault so i cant do anything on that end.

aThen a button will appear on your screen click that then it will give you a device option click on that and you can lock your screen turn the volume up and down and lock the screen rotation. Hope this helps!

Touch no longer works after software update

After downloading new software update, I got an error message during installation. Troubleshooting information recommended a restore. After doing a restore and using the most recent backup (which turns out to be my ONLY back-up) I am unable to change playlist with iTunes. I am unable to manually add anything. ANY suggestions?

Thank you to the community for the replies.
Its very frustrating to be having email issues. I'm here to help. Did Any of these suggestion resolve the issue? Have you downloaded any applications that effect or sync email? Are you still experiencing sync issues? As long as your device is backed up with Gmail and you know that log in information. Please hard reset the device and attempt to add the corporate e-mail again.
Thank you

Ipod Touch No longer working after Eleven days

I had been carefully checking blogs about which ipod touches had issues to make sure that mine was not part ok week 37. Nothing had gone wrong for the first week of use and i was pretty happy beyond a few small problems that i could live with. Like Freezing up when the battery was low, low wi fi connection, the touch screen not reacting to touch, and the fact that occasionally a song would just stop playing. But then about two days ago i turned on my touch aware that the battery was going low and was shocked when the screen continued to flash black to white, turing on and off about every 4 seconds. The power button is unresponsive, it will not let me reset is manually and now it does not register on my computer and when it is plug in the screen turns completely white then to pink and green ( Like when you computer is defragmenting). I cant do anything, its gone. about three days has gone by and im ready to return it, but i cant deside if i should completly return it and get a refund wait a month and get another, or try my luck with possibly getting another ipod with issues.

You are aware that since you have week 37, you might as well go exchange for a new one. I hear week 38 and 39 are okay, so if you do plan on exchanging it then get week 39. I have a week 39 and so far yet, I have not encountered any problems.

Where can I buy a replacement screen for macbook pro

my screen broke and i want to know if i can have the screen replaced

If it a fairly new MBP the only place to get a screen is from Apple. If it is 3+ years old look on iFixit.com and or other Mac parts resellers. A google search will turn up a few.

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
Can you help me?
Thanks

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Where can I get a replacement screen for my iPod touch?

Where can I get a replacement screen for my iPod touch?

Uer have been pleased with this place:
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
There are many complients about this place. You can Google and find many.
DigiExpress.us - The iPad Repair Professionals

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
Ron Bell
[email protected]

Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
I do not work for Mozilla but I do have experience of releasing software for public usage.
Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
You can go back to the old version of Firefox but that won't always solve your problem.
The web site below tells you how:
https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

Many Apps are no longer working after webOS 1.4 update! - please help!

Hi,
Many of my previously working Palm Pre Apps are no longer working after the webOS 1.4 update.
Here are the ones that just return a blank/white screen after launching so far:
SplashID
Daily Devo
Daily Light (Love)
Absolute Fitness (some options no longer work correctly & are returning a white screen and some options are working)
These are just a few of the Apps that I am having problems with and there are probably many others. I have also sent emails/posted to forums on the developer sites to advise. Hopefully I will hear something back soon.
Anyone else experiencing this issue as well with any Apps?
Thanks in advance for any help that you can provide.

SplashID on my Sprint Pre is showing just a blank screen after starting it and entering my password. I see no update for it in the App Catalog.
EDIT: Never mind. It appears that it only did that on the first launch. I closed it and restarted it, and now the screen in SplashID is correct.

Internet Explorer 9 no longer works after an uninstall of HP Support Centre

Internet Explorer 9 no longer works after an uninstall of HP Support Centre and drivers for 3 HP All-in-One printers (psc1310, C4180, F4200). Intend to re-install for just C4180. I selected option to remove for all related software, though the HP Update and Photosmart Essentials have been left. IE9 stops working when launched (even when launched with no add-ons and with Protected Mode disabled and Advanced Settings restored) and regardless of initial URL. If I remove the IE9 update then IE8 works fine. I tried re-installing IE9 update, twice, and it continues to fail.
I’m running Vista 32 Home Premium SP2 on Samsung Q210 with Norton 360 v5, SpywareBlaster and Spybot - Search & Destroy.
This question was solved.
View Solution.

I now believe the problem with IE9 was not related to HP, but to a Windows Update replacement to the “Intel Corporation - Display - Mobile Intel(R) 4 Series Express Chipset Family” drivers: Intel Corporation Display software update released in February, 2011 (useless link http://winqual.microsoft.com/support/?driverid=20411791). IE9 started working OK when I set “Use software rendering instead of GPU rendering*” (see http://forums.whirlpool.net.au/archive/1678709 with reference to “faulting module igdumdx32.dll”), so will now investigate removing that update.
Sorry to have cast aspersions on HP. MS did this to themselves, as usual.

Back to my mac no longer works after upgrading to Lion

Back to my Mac no longer works after upgrading to Lion
After I upgraded my home machines to Lion, I can no longer access them from my work computer, which is running Snow Leopard. When they were both Snow leopard, it worked fine. How can I get them working again? I don't have control over the OS on my work computer. Is it necessary for me to downgrade all of my home computers to Snow leopard in order to get them talking again?
Additionally the binoculars icon appears in the menu bar all of the time. In previous versions, this would only happen when somebody connected to my machine. Could these problems be related?

OK, so further investigation has addressed the BTMM issue on a remote machine.
With all machines running lion, I was having issues trying to log in to a standard user headless machine already running. In Snow Leopard, I had no issues with this since you can log in via screen sharing using an admin login that's running a standard login. Lion allows multiple accounts to be signed in which is handy since you can now run virtual sessions. This means you can admin the remote computer without bothering the remote user.
The problem was that now logging in using admin login brings up the admin account (which makes sense) instead of the desktop to the standard login. I applied a similar solution to a problem that was related to screen sharing I found on this board. What I believe to be the fix is to add the standard user to the screen sharing user list. Then screen share to the remote account using the standard user credentials.
So on the remote computer, in System Settings->Sharing->Screen Sharing, add the standard user to be allowed access. Previously I only had admins. This may not be an ideal solution for what I'm trying to do since the remote computers primary login is the standard user to be used as a common computer, but it now works so I am happy with it.
Now my only "problem" is my AEBS complaining about my MobileMe credentials, but it doesn't appear to have an impact on BTMM performance so I'll quietly wait for a fix down the road.

Apogee Jam No longer working after 1.1 update?

My apogee jam is no longer working after updating to Garageband 1.1. I have an Ipad 2 with firmware 4.3.3.
Specifically what happens is:
1. I open the garageband app
2. I select the guitar amp
3. I plug the Jam chord into Ipad (guitar is already connected to cord)
4. Jam light goes green, blue, bright green then green
When Jam light goes bright green, the monitor button in garageband goes dim and doesn't work.
I've tried plugging my guitar in first, then starting garageband, no difference in results.
I have tried turning the monitor "on" prior to pluging in the jam, when I do this the monitor/sound gate window stays open until the Jam bright green goes on, then it disappears and the monitor button goes dim.
Outside the garageband app, the ipad does recognize the Jam in settings, general.
What's worse (for me...) is that I backed up the Ipad in itunes thinking that app data would also be backed up (as I read that in a description of backup). I then deleted garageband from the ipad and then restored it from itunes. Guess what, lost all my songs... Bummed out... Why wouldn't my songs be backed up???
Anyway, any ideas on the Jam issue would be greatly appreciated. I'm hoping I am just overlooking a setting?

Unfortunately, I don't believe that Apple keeps prior versions of Apps available at the store. GB was the first app I purchased there day one of my Ipad, incredibly worth the $, and I did actually look to see if you could go back legitimately.This is just one of the many reasons to JBreak your devices, so that you can go backward if you need to. This is a perfect example of why Apple should make prior versions available, but they think they know it all and never make mistakes, so that will never happen. Again, this is why folks take things into their own hands and why the scene exists. There are plenty of abuses, more than not IMO, but here is a perfect example of how people are screwed and can't use their Jams any longer without a JBroken device. They obviously know that this issue exists, they have employees on these forums. It will be months if ever they fix this issue, because the number of owners of Jam, although in the thousands, is small potatoes compared to the Apple owner universe. I believe it will only be fixed if Apogee is able to put enough pressure on Apple. If you see the Jam removed from the Apple store and GB site you know that Apple is choosing not to fix it, because they won't sell or promote it directly and then have to deal with complaints and returns. But even this will happen slowly...
Actually it occurs to me that Apogee may have to redesign the Jam AGAIN in order to get it working with 1.1 on Ipad 2 and Iphone 4s (devices with the newer processor). I wonder if they will recall or replace the Jams for people who now have Jams not compatible with Garageband. Again, Apple should be posting a warning for Jam owners on the Garageband download page, but that will never happen because Apple doesn't care about small potatoes.
Message was edited by: Rickd3333
Message was edited by: Rickd3333

Headphones no longer work after ios8 update to Iphone 5

My plug in head phones no longer work after updating to IOS8. I thought it was the head phones and bought new ones - they don't work either. I updated my iPad and both head phones work. Phone is IPhone 5 - not due for an upgrade until December. Any suggestions?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion. They DO work on a lenovo machine but not my imac

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion.
They DO work on a lenovo machine but not my iMac. reset Pram - no luck. took speakers from wife's desktop, they
do not work when jack plugged into my iMac - Sys Prefs "SOUND" only lists "internal speakers/ built in" as available options.
I used my altec lansing speakers on 3 macs including this one for 5-6 years.....now with Mountian Lion I can only get internal speakers???
Ideas? Any/All help would be greatly appreciated - been going nuts with this for 2 days now.

Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Application Manager no longer works after I got a new computer.

Application Manager no longer works after I got a new computer.
I moved all of my data from one mac to the other, but the Adobe Suite no longer works.
I tried to re-install it, but it says now that Application Manager is damaged, it keeps sending me to the download page, I download, it starts installing then it says it is damaged, and so on... Got any idea?
Thank you!

1)
Click on the Finder and look for the options listed next to Apple Icon located at the top left corner of the Desktop screen and click on "Go" menu button and select "Utilities" option.
(Applications>Utiliites)
Locate Adobe Creative Cloud and Adobe Application Manager folder under Utilities window and trash both folders.
2) Trash Adobe Creative Cloud from Applications well.
3)
Click on the below link and download & run Adobe Cleaner tool :
Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up Selected" .
https://helpx.adobe.com/content/help/en/creative-suite/kb/cs5-cleaner-tool-installation-pr oblems/_jcr_content/main-pars/accordion_container_1/accordion-par/accordion-item-1/accord i on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip
4) Click on the below link and download Adobe Application Manager and install the same:
Once the installation process is completed , the installation box will disappear. Then open Application folder and locate Adobe application manager icon and double click on it .
It will start update process and gets updated to Creative Cloud .
http://download.adobe.com/pub/adobe/creativesuite/cc/mac/ApplicationManager9.0_all.dmg
Feel free to post , if you need further assistance

Touch no longer works after replacing screen for Yoga 2 Pro

Similar Messages

Maybe you are looking for