Touch or Express for Galaxy S5

Waht is the difference between Photoshop Touch and Photoshop Express for Android?
I have a Samsung Gallaxy S5 large phone.
Which one should I buy?

gwaldron,
We want to get to the bottom of this and get you back in business. What zipcode are you having this trouble in? When did this trouble start?
Before you go as far as the factory reset, let's first make sure "Auto-Reject Calls" is disabled: http://vz.to/1rPFE8H . You can also wipe the cache partition: http://vz.to/1n6PUtq . Retest and let us know if the trouble persists.
BrianP_VZW
Follow Us on Twitter @VZWSupport

Similar Messages

Touch to Express connection issue

I am using Airport Express with iPod touch 5.0.1, to play music and Pandora through my home stereo. The connection will work great for a day or two with no interruptions and then begin to intermittently drop to the point that it will no longer reconnect. After a day or two I will go back to it and it may or may not work. Very random. The rest of my wifi is very stable, its seems to only be a problem between the touch and express. Any ideas how I can remedy this connection issue? Thanks!

Pasi,,
Have a look here :
Re: MM-XI-SUS Integration
MM System - XI - SUS
MM-SUS XI configuration
MM-SUS cenario
Re: MM-SUS vendor replication error
similar to this you will find lots of threads .....make a serch by MM SUS interface in SDN ...will get enormous links..
Regards,

Lots of existing threads, but no consistent answer - what settings need to be applied to the 2012 (new) Airport Express for it to work at hotels with an ethernet only connection? Any answers specific to Japan would be helpful.

Lots of existing threads, but no consistent answer - what settings need to be applied to the 2012 (new) Airport Express for it to work at hotels with an ethernet only connection? Any answers specific to Japan would be helpful. I would prefer not to take my old Dell laptop and just be able to use my Ipad 2 via the wireless connection that the Airport Express creates. However, I can configure the Airport Express at home prior to leaving if that is the best thing to do.

I have a very similar problem with my AE! My MacBook, MacBook Pro & iPod Touch (1st Generation) all get a GREAT signal from our AE. BUT, our iPod Touch (2nd Generation) and new iPad (WiFi) get terrible signal strength unless we're right next to the AE!! Tech support at Apple is of no help! I'm ready to sell them all! This all started when we got the last OS update for iPod Touch/iPhone/iPad. So it must be a software issue not a hardware one..
Any ideas?

What is the difference between Photoshop Touch & Photoshop Express apps???

What is the difference between Photoshop Touch & Photoshop Express apps???

Thank you for your answer which is simple but accurate. Photoshop Touch is a
multi-functional editor and builder of graphics, and is capable of exporting its
output to Photoshop CS5 for further refinements. Like having Photoshop CS5 on
your iPad.... quite wonderful. While Photoshop Express is a simple digital
photo editor that works for everyday camera work. A very nice program.
BTW... Adobe Customer Service had me on the phone for over an hour, on hold and
off, and could not answer the question until they turned the phone call over to
a Supervisor in Tech Level 2. Very sad....
Miles Kristman
[email protected]

I need opinions. I currently on dilemma on buying iPod Touch 4 or Samsung Galaxy Tab. Comparing these two, which one is better? Why? Tq.

Well, I want to buy a new gadget for myself. But I currently don't know which one to choose yet. Both iPod Touch 4 and Samsung Galaxy Tab are great inventions! But i can't afford to buy both of them. So i'm asking all of you, any ideas or opinions on these two gadget? Which one is better and why? What do iPod 4 have that Samsung Tab don't have and vice versa. Thank you so much if you replying this.

I'm having the same issues you are having on my S3. I was on the phone with tech support (Verizon) last Friday for about an hour. I had to get a bit nasty with the tech when he attempted to blame Samsung for this (Samsung didn't release that update without Verizon's OK- and have you noticed Verizon has added their logo to the startup now?).
My data usage has gone up, battery draining much faster (and I have an extended battery!) and I had to re-load some of my widgets on the phone (including the My Verizon widget). The tech had me start the phone in Safe Mode (holding down the power, volume rocker and Home button at the same time until the Samsung logon screen shows then let go of the power button while continuing to hold the other two buttons until the phone logs on completely).
Whatever he did remotely seemed to make the phone act better yet he decided I need the update 'reflashed' to the phone. First he credited my account $30 to take care of any possible data overages. He then contacted my local Best Buy store to see if they could 'reflash' (upload the update again) the phone.
I went to Best Buy and had it done the next day. I think the phone was better before the 'reflash'! The tech gave me his personal Verizon cell number so I will be calling him back today.
An update for the update is coming yet the release date hasn't been confirmed. The tech said my account will be monitored for any overages in which I will received credits to cover it.
Good luck, Ginger- and I agree with you: if this doesn't get fixed I will move my business to T-Mobile!

SSRS expression for today,yesterday,Lastweek ,Last fortnight,Last Month, Year to date

Hi All;
I have a field called createdon
Using this field i need to create the SSRS expression for the table as below
Any help much appreciated
Thanks
Pradnya07

use expressions as below
assuming this is to be done in SSRS
Today
=COUNT(IIF(
DateDiff(DateInterval.Day,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Day,Cdate("01/01/1900"),Now()),Fields!YourRequiredField.Value,Nothing))
Yesterday
=COUNT(IIF(
DateDiff(DateInterval.Day,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Day,Cdate("01/01/1900"),Now())-1,Fields!YourRequiredField.Value,Nothing))
LastWeek
=COUNT(IIF(
DateDiff(DateInterval.Week,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Week,Cdate("01/01/1900"),Now())-1,Fields!YourRequiredField.Value,Nothing))
Last fortnight
=COUNT(IIF(
(DateDiff(DateInterval.Week,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Week,Cdate("01/01/1900"),Now())-1)
Or (DateDiff(DateInterval.Week,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Week,Cdate("01/01/1900"),Now())-2),Fields!YourRequiredField.Value,Nothing))
Last Month
=COUNT(IIF(DateDiff(DateInterval.Month,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Month,Cdate("01/01/1900"),Now())-1,Fields!YourRequiredField.Value,Nothing))
Year To Date
=COUNT(IIF(DateDiff(DateInterval.Year,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Year,Cdate("01/01/1900"),Now())
And
DateDiff(DateInterval.Day,Cdate("01/01/1900"),Fields!createdon.Value) <= DateDiff(DateInterval.Day,Cdate("01/01/1900"),Now()),Fields!YourRequiredField.Value,Nothing))
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

Visual Studio 2013 Express for Windows - InitializeComponent() does not contain a definition issue

Hi,
I have recently downloaded Visual Studio 2013 Express for Windows (Windows Store App version), with Update 1.
I create a blank app. I right-click on InitializeComponent() in the MainPage.xaml.cs and select Go To Definition. It brings me to the .g.i.cs file where this method resides.
I go into the designer for MainPage.xaml and create a grid of 2 rows and 2 columns (all at 1*). I add one button, doesn't matter where. I double click on that button to add a click method to MainPage.xaml.cs. Without entering anything into the button click
method, I scroll up and InitializeComponent() has an error and tells me there is not definition, even though I was looking at the definition a minute ago. I found I could unload the project and reload it and InitializeComponent() would have the definition
in the .g.i.cs file but as soon as I add another button click or anything else I run into the same error. It seems as if the .g.i.cs file is not automatically regenerating, or it is being deleted all together when the button click method is added to the xaml.cs
file.
Everything I have done up to this point is very vanilla. I installed VS '13 Express for Windows, didn't change any VS setting, created a project and ran into this issue. I installed Update 1 thinking there might be a fix from the update--no luck. The xaml
file Build Action is Page and the Xaml.cs file is Compile.
I have tried deleting the MainPage.xaml file, after the creation of a project, and adding a new MainPage file with the added templates VS wants to include, and I still run into the same issue.
I have searched for answers the past few days but haven't found anything that addresses my issue (most of what I found addresses VS '10 but their InitializeComponent() issues aren't the same as mine). Any help the MSDN community can provide would be
a great help. If worst comes to worst, I will re-install VS and see if that corrects it--this would be a last-ditch effort though.
Thank you for any help you may be able to provide

Intellisense has a bug in VS2013 where it doesn't recognize InitializeComponent when you start working on the XAML. My feeling is that if you try to compile this app, it will run fine (as long as there are no actual errors).
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

After getting a new router, my Ipod touch is asking for a password. I didn't have one before, so I don't know what it is

After getting a new router, my ipod touch is asking for a password. I was able to put in the router's passcode on all my other wireless stuff, but the ipod won't accept it. I thought I had made too many attempts, but I've reset it and it still won't let me on. I have no idea what the password is or why it is now asking for one. Help!!

Look at the manual for the router. The password is on the router. Then change the password in the router to something other than the default one and use that password when the iPod asks for it (it will only ask once, once it has the password/router combo in its memory, it will remember it)

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

I have had an iPod Touch 3rd Gen for two years and the apps have worked fine in the past. Suddenly the apps will not launch, they appear to start then just exit. Is there a reason why it is doing this?

I have had an iPod Touch 3rd Gen for two years pretty much and the apps have worked fine. Suddenly when I go on an app it appears to launch then just exits. I tried turning the iPod off and on again, but that made all my apps behave like that. Settings and those things work fine still. Should this suddenly happen? I dont want to lose all 204 apps.

- First try resetting the iPod. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next try downloading/installing a new app
- Restore from backup
- Last, resore to factory defaults/new iPod. this is last result since you will lose app data.

I just got an iPod touch 4th generation for my daughter. I already have a iPhone 5 setup with iTunes. All I want to put on her iPod is music and apps. How do I set the iPod to only get that information using my iTunes?

I just got a new iPod Touch 4th generation for my daughter. I have a iPhone 5 that is already set up on iTunes. The only thing I want on her iPod from my iTunes is music and apps. How do I set her iPod up so that it only gets that information? Do I set it up as a new device? If so will that alter my iTunes?
Thanks.
llfit

You can set up more than one device on your computer, and iTunes will remember the settings for each of them:
How to use multiple iPods, iPads, or iPhones with one computer
But you'll have to use your Apple ID to sync bought media to her device. Disable all other things you don't want to sync like photos, contacts, etc.

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement.

SSRS Expression for hiding some columns in column group based on parameter

I have a matrix table with column name WeekName which has the values of W1, W2, W3 and W4 which expands 4 columns when run. I need to hide the columns based on a parameter called WeekPar as follows:
If WeekPar = 1, hide columns W1,
If WeekPar = 2, hide columns W1 and W2
What would be the expression for that?
I know how to hide individual columns, but not some of the columns in a group. Is this possible?
Thanks in advance!

Hi QQFA,
After testing the issue in my local environment, we can refer to the steps below to achieve your requirement:
Right-click the WeekName column to open the Column Visibility property dialog box.
Using the expression below to control the Column Visibility (supposing the cell which contains WeekName field named WeekName ):
=switch(Parameters! WeekPar.Value=1,ReportItems! WeekName.Value="W1", Parameters! WeekPar.Value=2,ReportItems! WeekName.Value="W1" or ReportItems! WeekName.Value="W2")
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

SSRS Expression for Conditional Filtering using the "IN" operator

Hello,
I need to filter my dataset based on a parameter:
If Period= 1 then Week must be in (W1, W2, W3), Else Week must be in (W10, W20, W30)
I tried using the "IN" operator but don't know how to create the expression for the "Value" field. I tried the following:
iif(Parameters!Period.Value = 1,
"W1, W2, W3",
"W10, W20, W30")
But it doesn't work.
Expression: Week
Operator: IN
Value: ???
Any help would be highly appreciated!

Hi,
Use split function.
See this expression: IIF(Parameters!Period.Value = 1, SPLIT("W1,W2,W3",","), SPLIT("W10,W20,W30",","))
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/8da78c9b-7f0c-42f1-a9c4-82f065f317c9/using-the-in-operator-in-ssrs-expressions
Thanks Shiven:) If Answer is Helpful, Please Vote

Touch or Express for Galaxy S5

Similar Messages

Maybe you are looking for