Touch Pad doesnt w

Im new here, basically I joined becaues my zen touch pad stopped working and I thought maybe someone on here might have some insight as to how serious of a problem I have. I got my touch pad for Christamas and about a month later the touch pad part of it stopped working. I can still turn it on and off, but I cant controll what songs I listen to because the touch pad doesnt work. I can press the random button and listen to music that way, so I know that the player still works, but the touchpad isnt working. Has anyone else had this problem? If so what was the solution.

<FONT size=7>PEOPLE, PEOPLE, PEOPLE!
You all have the same problem, ok? The touch pad doesnt work. that means that you shouldnt trust Creative for mp3 players. They dont know what they are doing. They were doing fine with the little scroll joystick. that would last a long time. Scroll pads arent their speciality. Guys, you can just replace it and sell the new one for money to get a different mp3 player from a more reliable company. a company that lets you return you product for your money back. And Firmware updates only update the memory and performance of the player, not the touch pad. That is why the touch Pad doesnt work even if you use fimware upgrades. that is what i wantd to say!!!
Peace Out!!!!

Similar Messages

Mouse and touch pad not responding/working?

the entire touch pad doesnt work when using the computer. also when a mouse is plugged in that doesnt work either!...... but both work fine when in the lenovo help section, (when pressing the lenovo help button) they only dont work from the login section and when logged in.
HELP!!!

I am facing similar problem. However it is little different. My touch pad stopped working just within 3 months after buying this product. Now the problem is no body is taking responsibility of this kind of problems customers are facing. Here the real problem is my blue light at the touch pad has also stopped working.
I believe it means, it must have some hardware problem. Now it is almost more than 8 months to this product and am still struggling with this problem. The only good part of it is, here my usb mouse is still working.
One more thing i would like to know here, how can i find lenovo help key you mentioned in your querry? Please guide someone to get rid of this problem.

Touch pad doesn't work and some icons blinks after start up in hp dv4 pavilion 1211TU??

immediately after start up,my computer icon and task bar continuosly blinks and touch pad doesnt work,,it does'nt allow me to click on anything as everything seems to be blinking.and then if i press any button on keyboard the blinking stops and laptop works normally....is it a hardware problem or a software problem?

Hey there Kin,
Im not sure I understand the issue. Do you receive any error messages when you log in? To me this sounds like a software issue. If everything works normal pressing a button I would assume all the hardware is fine.
-Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Satellite A200 - Touch pad scrolling doesnt working

Hello,
my touchpad scrolling doesn't work.
I tried everything what is possible. But without result.
I think it is maybe on account of a bad driver.
But, I don't know...
In device settings -> settings, I have got only two points: overview buttons
I am sorry for my english, I know that I need to improve it.. :P
Help me pls!
Thank you...

Hi
I dont know if you have installed the OS manually from the Microsoft CD or if you used the Toshiba recovery CD. Using the Toshiba recovery CD you can set the notebook back to the factory settings.
If you have installed a clean OS then you have to install the Toshiba drivers in the right order. Check the installation instruction txt file on the driver page!
Note: There are two different touchpad drivers and both are needful!
Alps Electric Touch Pad Driver - This driver allows you to set the properties and functions for mouse control.
Synaptics Touch Pad Driver - This driver allows you to set the properties and functions for Touch Pad control.
Check and install both!!!
Then you should be able to configure the scrolling again.
Bye

Equium A200-1VO - touch pad doesn't work but external mouse does

I had a problem with my hard drive not working this just happened over night so I replaced the hard drive no problem and rebooted the system.
All is ok but the touch pad will not work.
I have tried FN+F9 this is ok I have updated the touch pad program still not working.
Please HELP!!!

To determine if its an hardware issue or a software issue do the following...
1) go into bios (f2) and set it to default settings and save
2) insert toshiba recovery cd and wait till the menu appears
You should be able to move the mouse inside the recovery GUI, if it doesnt move then try holding function and f9 again.
If this still doesnt work then your touchpad could be faulty.
*Note* dont start the wizard to recover vista because it will overwrite your data, just cancel this if the touchpad works under this.
If not just turn your laptop off and remove the recovery disk.

Touch Pad and Web Cam are not working after installing drivers also

Hiii
Synaptic Touch pad drivers are not working like not detecting the hardware so please help me on this
and
Webcam is not working like its not detecting even after installing cyberlink software given in the hp web site
please help me regarding this problems

1.Download hp support assistant.
2.Run it and go to the tab updates and tune-ups.
3.Click in the button check for updates. It will find you the updates.
4.Click in the button Download and Install.
5.When it finish restart your computer.
[link:http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=va_r602_us/en/any/psg/pl...
Also if it doesnt' work , you can also try :
1.Right click to the computer.
2.Click to the manage option.
3.Then select the device manager.
4.After that go to imagine devices and select your camera, then right click on it and select the option update the driver software do the same in the touchpad.
If and this doesn' t work unistall the drivers and install them again.

Ideapad S400 left touch pad and clicker not working

I've had this device for less than a year now, and all of a sudden the left touch pad and clicker are not properly working. If i try to click on something sometimes it doesnt work. I've tried about anything I can think of to see if it would help and so far nothing is working. Now let me mention that it doesnt happen all the time sometimes it works and sometimes it doesnt.

Yes I installed the right drivers before trying to dual-boot with Linux. The issue was there from the beginning. But the issue appears only after 1 or 2 hours of use. It was mandatory for me to install Linux, for my studies. So I hope it doesn't break the warranty, because it would be unfair for people who need to do what I did.
The problem is that I am right now in Finland, but I am French and I bought my netbook when I was in France. So if I send it back to HP France, it will take weeks and weeks to get it back here, and shipping cost will be really expensive, and I will be without computer during several weeks, which is impossible for me as I need it for my studies. That is why I want to go to HP Finland and ask them. I know I could call them but the last timeI called HP France, I waited for hours and didn't get any answer on the phone.

Pro L10: After using a wireless mouse, the touch pad has stopped working

Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. On start up the touch pad icon shows and the touch pad operates intermittently, after a few minuets the icon disappears and the touch pad stops functioning. In the control panel/mouse & or device drive I can the program operating and then disappears.
I have removed the software and reinstalled to no avail. On occasions I get a message to say that another pointer is in operation.
Can you help?

Hi
It seems that the wireless mouse or the wireless mouse drivers/software has a bad influence on the touchpad.
I dont have a proper solution for this issue. Well, you can check the Toshiba driver page for newest driver updates. If the updates doesnt solve this issue so I suggest to use either the wireless mouse and disable the touchpad with the key combination FN+F9 or to use a common USB mouse.
I assume that you dont have any problems with a common USB mouse.

My touch pad getting hot and freezing up while my laptop just on.

When I use my notebook more than 2-3 hours while on floor or hard surface touch pad gets hot or does not work properly I have new 5months used notebook and latest touchpad drivers. But when I use my notebook as playing games or watching movies with external mouse then my touchpad getting too hot but notebook remains normal condition.
This question was solved.
View Solution.

According to the message you have recently posted I would like to confirm that this could be a hardware issue and I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance without any delay to get your Notebook diagnosed and serviced by an authorized HP Certified Engineer
You can also Check your warranty Here to verify the warranty status
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
GBL84
Although I am an HP employee, I am speaking for myself and not for HP

The scroll feature on my touch pad does not work with 4.0. Works in all other apps including 3.6. What hapened???

I can not scroll through web pages with the scroll feature on my touch pad. It worked in 3.6 and all other programs that I use. I have tried 4.0 twice with the same results, I've restarted, rebooted etc.
This should not be application dependant but a system function.
Now I will either roll back to 3.6 where I have troubles with some secure sites or just dump the whole thing and try Chrome.

I have discovered the solution and it involves an issue I suspected. After the restore of my old Time Machine Lion files to my new MBP running ML, the restore restored my computer back to Lion. After an install of ML, my computer worked perfectly except the fancy Scroll and zoom featured we all love from the trackpad. Ha already installed ML on other partitions and the trackpad worked perfectly on them. Even the guest login's trackpad worked perfectly but not the main admin account.
First thought was to create a new admin account and copy everything from the old admin to the new admin and then delete the old admin account. Hated the idea because all files had to be copied rather than moved.
So what was left to do. I had thought of deleting all the apple preferences from the library and replace them with the contents of the library on another partition in ML. First I deleted old preferences many of which were old Lion preferences. That didn't solve the issue.
I forgot that Lion and ML HIDE the user library so I was working on the wrong library. Discovered the Terminal command "chflags nohidden ~/Library" and I chose to reveal the user library on a ML partition.
Solution:
I booted into another ML partition. I guess that I could have booted into the new admin user account and changed the permissions to access the old admin users Library But I chose to boot
from another ML partition: copy ALL the com.apple. XXXXX.plist files and the folder BY Host. It has special hidden files. Other way is to copy the Preferences folder we'll say into the Desktop.
I then proceeded to delete ALL the com.apple…….plist files and the Host folder into the trash. Then I copied all the apple.com…plist files and the Host folder and then rebooted. And now my wonderful Trackpad works as mountain Lion intended it to work.
I'm leaving this solution because there's someone else in the MacWorld with the same issue.
Ted

I wiped down the touch pad on my MacBook Pro and now it's not working well

I wiped down the touch pad with a damp cloth on my MacBook Pro and not it's not working very well. What should I do to fix the problem?

Let it dry, it will come around. You just chilled it a little most likely, unless the cloth was very damp....
Next time use rubbing alcohol.
It removes the oils and grease and dries fast too.
So your have appy to the cloth, wipe, flip the cloth and wipe up the dirt and grime, then start the process with a new clean section of cloth, else you place the grime back on.

In my MacBook Pro old 2006 late model Lion 10.7.4 how achieve right click from touch pad

In my MacBook Pro old 2006 late model Lion 10.7.4 how achieve right click from touch pad?

The multigesture buttonless trackpad was introduced with the Unibody Macs that came out in Late 2008. Successive models have built upon that, adding 2, 3 and more fingers to the gestures.
Older models don't have the trackpad hardware needed to detect those motions and, hence, cannot support multigestures. Only resort is using combination of keys with the button, as disguise suggests.

I am trying to add a game to my sons I touch pad. It is a free game. It asks for verification of password and credit card info. Every time, it tells me that my time has expired. Help.

I am trying to add a game to my sons I touch pad. It is a free game. It asks for verification of password and credit card info. Every time, it tells me that my time has expired. Help.

It asked me that too.Don't worry and just put it in. Itunes doesn't charge unless your son buys something. The password happens to me all the time. Credit card was only once. Just make sure your son knows not to buy anything without permission so he doesn't accidently charge you something.

Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit).

Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit). Have tried it on other browsers, and works as it should. The last add-on i installed for Firefox was "Fox Filter" so my kids couldn't accidentally stumble onto sites of immoral tastes. I can't see why that would have any effect, but it was the last update/add-on i installed to the browser, but even then,.......it was working fine for a week and a half afterwards until now. Please help.
== This happened ==
A few times a week
== A week and a half after i installed Fox Filter. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

Hello Steve.
You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
If you detect a faulty add-on, you should contact its author for support. You can also search for alternatives. Site filters are relatively common in the add-ons gallery: [http://addons.mozilla.org addons.mozilla.org].

I have updated to maverick from mountain lion.initially my mac book pro was snow leopard.the multitrack touch pad swapping the page is not happening in finder,it is only working in safari.please help me how to get that swiping gesture in finder

i have updated to maverick from mountain lion.initially my mac book pro was snow leopard.the multitrack touch pad swapping the page to get back to previous page is not happening in finder,it is only working in safari.please help me how to get that swiping gesture in finder

Hi..
I repled to you here > https://discussions.apple.com/message/25598596#25598596
Please do not start duplicate topics. It makes it that much harder to assist you.

Touch Pad doesnt w

Similar Messages

Maybe you are looking for