Touch pad not working properly

lower end of screen doesn't recognize my finger input!!
in any mode, can't press call button nor can't type keys on that particular line
Please help!!!!

Took my iphone to the apple store, knowing my warranty had recently ran out. I showed the guy there my phone, he looked at it for a bit and was extremely nice to me! He looked up my phone, saw the warranty had recently ran out AND was nice enough to give me a break and switched out my iphone(w/ scratches and dents) for a brand new/ refurbished one for FREE! I was then able to sync all my old info onto my new iphone! I feel alive again

Similar Messages

Touch pad not working properly for iphone 4s

touch pad not working properly for iphone 4s. Few letters are not working at all and my phone ios slowly loosing touch sensitivity. I lost my phone and got the new phone 10 months back.

Try here > iPhone: Troubleshooting touchscreen response
Also go to settings>general>reset>rest all settings phone will turn off and turn on by itself
Once the phone is press and hold the home and power button at the same time wait for the apple sign then release the buttons phone will turn off and on.
Update the software of your iphone or restore the phone to its factory settings

Synaaptics Touch pad Not working properly

From many days my synaptic touchpad is showing a problem.......when i turn on my laptop my touchpad works properly for nearly three mnts and then it stops to respond then when i go to mouse settings and moves toward the divice settings tab.......and select synaptics touchpad ....and then first disabled it and unable again then again it starts to work properly for few mnts but it stops after few mnts........ again and again i have to repeat the same process to make it to work....... i am too perplexed to do so again and again... i really need to get rid of that.... i have searched alot on differents forrums support but not of any worked for me......please now help me!!!!!!!!
Laptop: HP Probook 450 G1
Original Name: Abdullah Abro
And advance thanks to one who helps me.....!!!!
please make me to get rid of this .......

Hello @venis ,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, here is a document on how to troubleshoot the mouse and Touchpad sensitivities.
If you will go to the section on Adjusting TouchPad or ClickPad pointing sensitivities it should help resolve the issue.
Here is a link for your driver Window 8 for the Synaptics TouchPad, if needed uninstall the old driver and install the new.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP Pavilion Volume Touch-Pad NOT WORKING | NO SOUND HELP

HP Pavilion Volume Touch-Pad NOT WORKING
I have an HP Pavilion dv3t - 2000, Windows Vista computer.
SOMEONE DID ALREADY HELP ME HERE WITH THIS PROBLEM BUT THEY STOPPED RESPONDING | Please check that link out!
The volume touchpad above the keyboard is not working properly (There is no sound coming out of the speakers or the headphone jack) , If you touch the megaphone part of the touchpad above the keyboard then it stays red, however the sound icon on the taskbar changes from mute to unmuted when you touch the red megaphone. The volume slider on the touchpad works suprisingly.
I don't know if I uninstalled something or what but I need this problem fixed!
Thanks!

Hi,
Shut down the notebook, unplug the AC Adapter and remove the battery.
Follow the procedure detailed on Page 63 of your Maintenance & Service Guide to remove the RTC battery. Hold down the power button for 30 seconds.
Leave the notebook for 10 minutes and then re-insert the RTC battery, re-assemble and replace the cover, insert the battery, plug in the AC Adapter and start the notebook. Tap away at f10 as soon as you start the notebook to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
If you still have no audio and the installer you downloaded previously still doesn't detect the Hardware, it would start to look like a Hardware failure, but to try and rule out any further software cause, try the following.
Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run. The 'Try it' option runs the OS from the CD without the need to install on your HDD. If this runs Ok ( it will be slow running from a CD ) and you still have no audio output, this would tend to confirm a Hardware issue.
http://www.ubuntu.com/desktop/get-ubuntu/download
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

All button and touch pad not working except power button

I face the problems that all button and touch pad not working after power on or wake up from sleep state except power button. And i have make the system sleep and wake again so that the mac book air can working as normal( mouse can move and button got response).

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly. Try performing a hard reset first, if it doesn't work then we'll move to the next step.
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds); (if the computer doesn't power on, move to the next step)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

HP Pavilion Volume Touch-Pad NOT WORKING | NO SOUND

HP Pavilion Volume Touch-Pad NOT WORKING
I have an HP Pavilion dv3t - 2000, Windows Vista computer.
The volume touchpad above the keyboard is not working properly (There is no sound coming out of the speakers or the headphone jack) , If you touch the megaphone part of the touchpad above the keyboard then it stays red, however the sound icon on the taskbar changes from mute to unmuted when you touch the red megaphone. The volume slider on the touchpad works suprisingly.
I don't know if I uninstalled something or what but I need this problem fixed!
Thanks!
This question was solved.
View Solution.

Hi,
Shut down the notebook, unplug the AC Adapter and remove the battery.
Follow the procedure detailed on Page 63 of your Maintenance & Service Guide to remove the RTC battery. Hold down the power button for 30 seconds.
Leave the notebook for 10 minutes and then re-insert the RTC battery, re-assemble and replace the cover, insert the battery, plug in the AC Adapter and start the notebook. Tap away at f10 as soon as you start the notebook to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
If you still have no audio and the installer you downloaded previously still doesn't detect the Hardware, it would start to look like a Hardware failure, but to try and rule out any further software cause, try the following.
Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run. The 'Try it' option runs the OS from the CD without the need to install on your HDD. If this runs Ok ( it will be slow running from a CD ) and you still have no audio output, this would tend to confirm a Hardware issue.
http://www.ubuntu.com/desktop/get-ubuntu/download
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem. I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

Touch is not working properly

I have hp omni 10 .one day I change option of re calibrated now touch is not working properly how I can fix this

It seems that one of the Windows Updates is causing some conflict with the touchscreen driver/firmware. Try the following steps as a temporary work around until HP can come up with a permanent fix.
1. As you power on the Omni 10, press the hardware Volume Down button to get into the BIOS menu
2. Select BIOS Setup (if the touchscreen is not responding, you'll need to plug in a USB mouse via a micro USB male to USB female adapter)
3. Select Exit on the LEFT side of the screen
4. Select Load Setup Defaults on the RIGHT side of the screen & select Yes
5. Select Exit Saving Changes on the RIGHT side of the screen & select Yes
After the restart, the touchscreen should work again.

Touch pad not working with HP G60 operating on Windows 7

I have a HP G60 operating on Windows 7 (not sure bit) and have problems with touch pad not working.
I was using touch pad and wireless mouse interchangeably for past year.
No recent changes made to system. Suddenly not work one evening. Have tried shutting down and left overnight which has not resolve problems. On one occasion, i was not even able to type and that resolved after re-starting computer.
There is a button between space bar and top of touch pad which is white. Even when i press and turn red, it has not changed situation. Therefore I have to use my wireless mouse to operate for the moment.
Would appreciate any advice about what is the problem and ways to resolve it.
Thanks a lot!
Mo

Hi,
The numbers are fine
Try the following.
First, ensure the Touchpad is switched on ( the light between the Touchpad and the Spacebar should be white ), then download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp44501-45000/sp44940.exe
Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
When this has completed, shut down the notebook, remove any external devices connected to the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
When windows has fully reloaded - it will automatically load a generic driver for the Touchpad, but just let it do this. Then open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I am facing a new problem after a missed call. i phone will get freez on its lock screen after a miss call. Its seems that its main screen touch is not working properly. This problem occurs after each and every missed call.

I'm using iphone 5s with ios 7.1.2 & I am facing a new problem after every missed call. i phone gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its irritating to reboot the phone frequently after each issue....

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

Synaptics Touch pad not working

Hi there,
My Synaptics Touch pad not working.
System: HP ProBook 4540S, MS Win8 x64 Ent.
Please advise.
Thanks in advance!

Hello needsnow,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your Touchpad on the HP ProBook 4540s running Windows 8 is not working. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My hp 430 pc touch pad not working

my hp 430 pc touch pad not working. please help me

****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Touch pad not working of my laptop 48510s help for the same

touch pad not working of my laptop 48510s help for the same

Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...Re-Sync your Content
Note:
To remove a forgotten Restrictions passcode you will need to Restore the Device as New...
OR... From a Backup created Before the Restrictions Code was set....

Touch pad not working - Satellite Pro A300

I have just turned my laptop on after a day of not using it and the touch pad is not working correctly.
Whenever i try to move the mouse is goes all over the place and starts clicking on things when im not and highlighting and dragging things all the time when i'm just trying to move the mouse somewhere.
Its as if it has a mind of its own.
Does anyone know what is wrong with it please or do i just need to get a new one?

I found this forum while trying to get my niece's Sat Pro A300 working. I HAVE SOLVED THIS PROBLEM. In the end I removed Vista and installed XP SP3. (Note: to do this you need to change the BIOS SATA setting to "Compatibility" for the XP install to see the Hard Drive). The Touchpad still did not work. The Synaptics drivers from the Toshiba Australia site would not install, the installation wizard said "iKernel.exe" was missing. The driver for XP/Visata 32-bit from the Synaptics website said it wasn't a 32-bit app or similar error.
So, I used the Toshiba Utility to do a Windows update of the BIOS which took it from ver 1.03 to 1.08. Note: the 1.09 version won't install on this machine. Note: the update changes the SATA setting mentioned above to the other option i.e. not "Compatibility". You need to change it to "Compatibility" for the machine to reboot into XP properly.
Restarted, and the Touchpad worked, except it comes up as a PS/2 Mouse, but it works.
I then went to the Synaptics site and installed the Windows 2000 driver and now I have a working Touchpad which is identified in Device Manager as a Synaptics Touchpad.
Hope this helps. Maybe in Vista just updating the BIOS to 1.08 would be enough to make it work. I dropped back to XP because Vista was very slow, and not working properly.
Now, all I need to do is find out what the last "Unknown Device" is, although it doesn't matter as everything is working.
Why do they make it so hard?!!?!!
Message was edited by: keithm

Software complaint and touch pad not working

iam using 9300 handset and its hasn't been a year since I bought it. iam facing lot of software problems and my touch pad is not working properly. I bought this set from Dubai and iam using it in India, bangalore. When I went to the BB service center they said they do not accept international handset. Kindly tell me what should I do now!

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly. Try performing a hard reset first, if it doesn't work then we'll move to the next step.
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds); (if the computer doesn't power on, move to the next step)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

Touch pad not working properly

Similar Messages

Maybe you are looking for