Touch Pad Not Working / Warranty Question

I spilled coffee on my new HP computer and now the touch pad doesn't work. Have I voided the warranty due to liquid damage?
This question was solved.
View Solution.

Hi,
Most likely that is not warranty covered. Please read more from this:
http://h40059.www4.hp.com/warranty/information/faq.php
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

HP Pavilion Volume Touch-Pad NOT WORKING | NO SOUND

HP Pavilion Volume Touch-Pad NOT WORKING
I have an HP Pavilion dv3t - 2000, Windows Vista computer.
The volume touchpad above the keyboard is not working properly (There is no sound coming out of the speakers or the headphone jack) , If you touch the megaphone part of the touchpad above the keyboard then it stays red, however the sound icon on the taskbar changes from mute to unmuted when you touch the red megaphone. The volume slider on the touchpad works suprisingly.
I don't know if I uninstalled something or what but I need this problem fixed!
Thanks!
This question was solved.
View Solution.

Hi,
Shut down the notebook, unplug the AC Adapter and remove the battery.
Follow the procedure detailed on Page 63 of your Maintenance & Service Guide to remove the RTC battery. Hold down the power button for 30 seconds.
Leave the notebook for 10 minutes and then re-insert the RTC battery, re-assemble and replace the cover, insert the battery, plug in the AC Adapter and start the notebook. Tap away at f10 as soon as you start the notebook to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
If you still have no audio and the installer you downloaded previously still doesn't detect the Hardware, it would start to look like a Hardware failure, but to try and rule out any further software cause, try the following.
Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run. The 'Try it' option runs the OS from the CD without the need to install on your HDD. If this runs Ok ( it will be slow running from a CD ) and you still have no audio output, this would tend to confirm a Hardware issue.
http://www.ubuntu.com/desktop/get-ubuntu/download
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Touch pad not working with HP G60 operating on Windows 7

I have a HP G60 operating on Windows 7 (not sure bit) and have problems with touch pad not working.
I was using touch pad and wireless mouse interchangeably for past year.
No recent changes made to system. Suddenly not work one evening. Have tried shutting down and left overnight which has not resolve problems. On one occasion, i was not even able to type and that resolved after re-starting computer.
There is a button between space bar and top of touch pad which is white. Even when i press and turn red, it has not changed situation. Therefore I have to use my wireless mouse to operate for the moment.
Would appreciate any advice about what is the problem and ways to resolve it.
Thanks a lot!
Mo

Hi,
The numbers are fine
Try the following.
First, ensure the Touchpad is switched on ( the light between the Touchpad and the Spacebar should be white ), then download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp44501-45000/sp44940.exe
Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
When this has completed, shut down the notebook, remove any external devices connected to the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
When windows has fully reloaded - it will automatically load a generic driver for the Touchpad, but just let it do this. Then open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP Pavilion Volume Touch-Pad NOT WORKING | NO SOUND HELP

HP Pavilion Volume Touch-Pad NOT WORKING
I have an HP Pavilion dv3t - 2000, Windows Vista computer.
SOMEONE DID ALREADY HELP ME HERE WITH THIS PROBLEM BUT THEY STOPPED RESPONDING | Please check that link out!
The volume touchpad above the keyboard is not working properly (There is no sound coming out of the speakers or the headphone jack) , If you touch the megaphone part of the touchpad above the keyboard then it stays red, however the sound icon on the taskbar changes from mute to unmuted when you touch the red megaphone. The volume slider on the touchpad works suprisingly.
I don't know if I uninstalled something or what but I need this problem fixed!
Thanks!

Hi,
Shut down the notebook, unplug the AC Adapter and remove the battery.
Follow the procedure detailed on Page 63 of your Maintenance & Service Guide to remove the RTC battery. Hold down the power button for 30 seconds.
Leave the notebook for 10 minutes and then re-insert the RTC battery, re-assemble and replace the cover, insert the battery, plug in the AC Adapter and start the notebook. Tap away at f10 as soon as you start the notebook to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
If you still have no audio and the installer you downloaded previously still doesn't detect the Hardware, it would start to look like a Hardware failure, but to try and rule out any further software cause, try the following.
Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run. The 'Try it' option runs the OS from the CD without the need to install on your HDD. If this runs Ok ( it will be slow running from a CD ) and you still have no audio output, this would tend to confirm a Hardware issue.
http://www.ubuntu.com/desktop/get-ubuntu/download
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Synaptics Touch pad not working

Hi there,
My Synaptics Touch pad not working.
System: HP ProBook 4540S, MS Win8 x64 Ent.
Please advise.
Thanks in advance!

Hello needsnow,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your Touchpad on the HP ProBook 4540s running Windows 8 is not working. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

All button and touch pad not working except power button

I face the problems that all button and touch pad not working after power on or wake up from sleep state except power button. And i have make the system sleep and wake again so that the mac book air can working as normal( mouse can move and button got response).

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly. Try performing a hard reset first, if it doesn't work then we'll move to the next step.
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds); (if the computer doesn't power on, move to the next step)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

My hp 430 pc touch pad not working

my hp 430 pc touch pad not working. please help me

****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Touch pad not working properly for iphone 4s

touch pad not working properly for iphone 4s. Few letters are not working at all and my phone ios slowly loosing touch sensitivity. I lost my phone and got the new phone 10 months back.

Try here > iPhone: Troubleshooting touchscreen response
Also go to settings>general>reset>rest all settings phone will turn off and turn on by itself
Once the phone is press and hold the home and power button at the same time wait for the apple sign then release the buttons phone will turn off and on.
Update the software of your iphone or restore the phone to its factory settings

Touch pad not working of my laptop 48510s help for the same

touch pad not working of my laptop 48510s help for the same

Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...Re-Sync your Content
Note:
To remove a forgotten Restrictions passcode you will need to Restore the Device as New...
OR... From a Backup created Before the Restrictions Code was set....

MY LAPTOP MOUSE TOUCH PAD NOT WORKING

MY LAPTOP MOUSE TOUCH PAD NOT WORKING

When requesting assistance, please provide the full HP model name and/or product number of the computer in question.
It is possible that the touch pad was accidentally turned off... please looking for a symbol on a "F" key tha look like the touch pad and press it. It is also possible that the touch pad on/off button is located elsewhere on the computer. Once we have the requested information, we will be better able to assist you.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Sleek touch pad not work

I have had my Zen Sleek for 9 months and recently the touch pad has stopped working correctly, I go to scroll and nothing happens, After I try as hard as I can to get the touch pad to work, it will work for about two minutes then it cuts out again, Any Ideas?

Unfortunately it sounds like it may be faulty. You didn't mention what region you're in, but I would recommend contacting Customer Support, to see if they can assist you.
Cat

Keyboard and Touch-Pad Not Working After Having to Install New Hard Drive

I had to install a new hard drive in my HP Pavillion DV9700t that has Vista Home Premium 64-bit. After going through the recovery process with backup disk the built in keyboard and touch-pad do not work. During the installation, an error message came up saying something along the lines of "the drivers are not supported by this verison of windows because they are unsigned." The drivers that had that error were "hpqkbfiltr keyboard filter driver," "HP remote control HID Device," and "hpqkdfilter driver." I tried to update the drivers for the keyboard from the hp website, but the keyboard and touch-pad still do not work.
My question is, where do I find the digitally signed drivers for the keyboard and touch-pad that Vista won't flag and disable?
Help please!

Sparkles,
Thanks for the suggestions.
When dealing with MS Fix It, I was choosing run. Upon further investigation on that site, there really isn't a scan that applies to my issue anyways I tried the .NET Framework repair tool, and that seemed to work. It told me to try re-running what I was having issues with, so I tried running the Windows PowerShell again, but again was faced with the following message "windows update standalone installer encountered an error: 0xc8000247." I went back to the .NET screen and hit "Next" because it didn't work, and that responded by saying they were going to submit logs to Microsoft. I won't hold my breath on that one.
I'm to the point where I honestly don't care anymore. I have no idea what to do, because doing a clean install with the discs HP sent me isn't going to help because they are just recovery discs, and not an actual Windows disk. This is the second hard drive I have had to put into my laptop and use those recovery disks on in the last 3-years. The built-in keyboard hasn't worked during that time frame on either hard drive. I don't think the recovery disks I was sent install properly. Not sure where to go from here. I spent way too much money on this laptop years ago having it custom built to handle all of my drafting programs, so I don't want to just kick it to the curb. I was looking into the possibility of just replacing it, but I cannot stand the Windows 8 interface.
I guess I should have fixed the issue with the keyboard on this hard drive before loading all of my programs. Between the recovery disk install, formatting of the hard drive, and installing all of my programs it took well over 12 hours. Not really looking forward ot that again Then there's shockwave and flash and all of the other goodies that my recovery disks won't restore anyways.
Sorry if this seems like a negative post, but I'm just tired of trying to no avail. Maybe I should just take it somewhere to get it looked at, but I can't see them being successful if the recovery disks won't help anyways.
Thanks for you help,
MadBuch

Touch pad not working on right side

Hi I have been trying to get my printer to turn on and it is stuck on maintenance mode and my right side of the touch pad won't work is there a replacement for the touchpad or a way around mainenance mode?
This question was solved.
View Solution.

Hello @jgrier1,
Welcome to the HP forums.
I understand that your printer is stuck on the maintenance mode and the touch pad is not responding.
I would like to help.
I'm sorry but the display on the Officejet 6500A Plus, is not a user replaceable part.
Try going through the following document for the touchscreen.
It may also get you past the maintenance mode issue.
The Touchscreen Does Not Respond
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Synaptic touch pad not working a

The touch pad decided to stop working. It is functional through out the system boot process and during user login. Once the desktop shows up it does not work. The pencil mouse on the keyboard works as does a USB mouse. I have uninstalled the driver and reinstalled from the HP download center. Same problem. Anyone have any other suggestions?
Before I downloaded and installed the driver, there was a faint image of the touchpad with a red slash acroo it indicating that it was not available. After the re-install the slashed touchpad image did nto appear, but the touch pad failed to respond. The buttons still work.

Hi @vahhi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP Pavilion 15-n204tx Notebook and issues with the Touchpad drivers. Uninstall what driver and software you have now and do the update from the HP Support Assistant. They are created for your Notebook.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating.
I hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

U300s TOUCH PAD not working

HI,
The Touch PAD of my laptop stops working when moving from one table to another. After restarting the laptop, its starts functioning properly.
But one i move it....again the pad stalls and the entire restarting process has to be repeated..
Does any one have perminant solution???

Hi Sharifk,
Welcome to the Forums
As per the query we understood that you are facing issue with touchpad not working in your Lenovo U300s laptop.
Try to update the touchpad driver and check for the issue,
Click here for the touchpad driver for windows 7.
Click here for the touchpad driver for windows 8.
Hope this helps. Do post back if the issue persists!
Best regards,
Ashwin. S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Touch Pad Not Working / Warranty Question

Similar Messages

Maybe you are looking for