Touch Pad on my satellite A665-S6094

Being an automation's mechanical engineer has some down sides. I'm unable to handle simple things. My touch pad is still working except when you tap it. Tapping on it suddenly does nothing and I'm fourse to press the button.
If you can help that would ne great. thanks

Go to Control Panel/Mouse/Device Settings/Settings/Tapping (left pane)/Put a check mark in the box "Enable Tapping"/Apply/OK. If that doesn't get your tapping back, let me know.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Similar Messages

Where can i find touch pad drivers for Satellite A300?

Where I can find Touchpad Drivers for Toshiba A300?
Help, please.

Or here easy link: http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU_
After follow: Notebok>Satellite>Satellite A Series>Satellite A300>"Short Model No" (turn upside down computer & find 6 simbols, one of same combination as in filling rows examp.)>"Operating system" (OS name - XP or Vista 32 Bit or Vista 64 Bit :) just look in PC System info)>Touch Pad Driver
Message was edited by: Vsiak

Touch pad freezes on Satellite A350-02T

I just purchased a brand new Satellite A350-02T laptop. I've only used it twice, and both times I've used it, the touch pad, at some point, has stopped working. Well, not "stopped", but becomes flakey, figitty, freezes, stalls... it's kind of hard to explain.
It will move a bit then freeze, then move a bit and freeze.
Also, I noticed yesterday when I was using it, the scroll option stopped working. I was viewing a .pdf document and it was allowing me to scroll one second, and then the next second, I couldn't scroll. I tried opening the web browser and scrolling but it still wouldn't let me. I rebooted the computer and it seemed fine again.
Any suggestions?

Hi!
Have you tested an external mouse on the notebook? Does it work or not?
Its really hard to say what is the reason for this because Im not a notebook technician but have you tried to update the touchpad driver? You can find it on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
What OS do you use and have you installed the notebook with the Toshiba recovery disk or Microsoft disk?
Bye

Satellite A665-S6094 BIOS Instability with 4GB of RAM

I recently upgraded the RAM in my Sattelite A665-S6094 laptop to 8GB, and I was cheerfully greeted with frequent memory-related bluescreens and an inability to use the sleep function.
The laptop works perfectly with the original 2x 2Gb modules installed, but problems show up if I add any more.
When trying to wake the computer from sleep, it gets to the login screen and promptly shuts down as if I pulled the power. This crash is not logged in the system anywhere.
While in Windows, I periodically get a stop error classified as "MEMORY_MANAGEMENT" with no apparent direct cause.
These problems only exist when the installed RAM exceeds the original 4GB size.
I am running the most recent BIOS revision; version 2.20.

Hi sanremo,
I saw the document you suggest and I think it was quite useful. I realized that my processor, my chipset and the system supports 64-bit edition of Windows, so I think I will try to install it. I would like to try Windows XP Pro 64-bit and not Vista, but Toshiba do not supply drivers for XP 64-bit. They have available XP 32-bit and Vista 32-bit & 64-bit. So I will try the Vista Business 64-bit.
Thanks a lot both for your replies.

Touch pad not working - Satellite Pro A300

I have just turned my laptop on after a day of not using it and the touch pad is not working correctly.
Whenever i try to move the mouse is goes all over the place and starts clicking on things when im not and highlighting and dragging things all the time when i'm just trying to move the mouse somewhere.
Its as if it has a mind of its own.
Does anyone know what is wrong with it please or do i just need to get a new one?

I found this forum while trying to get my niece's Sat Pro A300 working. I HAVE SOLVED THIS PROBLEM. In the end I removed Vista and installed XP SP3. (Note: to do this you need to change the BIOS SATA setting to "Compatibility" for the XP install to see the Hard Drive). The Touchpad still did not work. The Synaptics drivers from the Toshiba Australia site would not install, the installation wizard said "iKernel.exe" was missing. The driver for XP/Visata 32-bit from the Synaptics website said it wasn't a 32-bit app or similar error.
So, I used the Toshiba Utility to do a Windows update of the BIOS which took it from ver 1.03 to 1.08. Note: the 1.09 version won't install on this machine. Note: the update changes the SATA setting mentioned above to the other option i.e. not "Compatibility". You need to change it to "Compatibility" for the machine to reboot into XP properly.
Restarted, and the Touchpad worked, except it comes up as a PS/2 Mouse, but it works.
I then went to the Synaptics site and installed the Windows 2000 driver and now I have a working Touchpad which is identified in Device Manager as a Synaptics Touchpad.
Hope this helps. Maybe in Vista just updating the BIOS to 1.08 would be enough to make it work. I dropped back to XP because Vista was very slow, and not working properly.
Now, all I need to do is find out what the last "Unknown Device" is, although it doesn't matter as everything is working.
Why do they make it so hard?!!?!!
Message was edited by: keithm

System Image - A665-S6094

Hi.
I have satellite A665-S6094 (US Version). I created system image and used it before.
After that HDD broken and changed.
But service installed windows7 Turkish version. But my original windows7 is US.
Now when i want to use my system image, it doesnt work.
But as i said before, i use my system image on my old hdd. So dvd has not error.
What can i do now, how to load my system image to new hdd?

Sorry, your image won't work even if they had installed usa version it would not work! cause when you create a image in the background it puts exclussive system rights codes to the image [ like a passcode ] and only the origanator windows can access the image! Microsoft done this on purpose to hold their rights, so users could not replicate to other systems!

Restore A665-S6094

I purchased the Toshiba A665-S6094. It didn't come with a DVD Restore Disk. I would like to know how to restore it back to the first day I purchased.

Satellite A665-S6094
For the whole story, see the section Recovering the Internal Storage Drive, which begins on p. 61 of the User's Guide.
Satellite A660 Series User’s Guide
-Jerry

Satellite C655-S9521D Touch Pad Left Click not Working !

My Laptop (Satellite C655-S9521D) left click in touch pad not working from yesterday.
But i can move the cursor using touch pad. I think it just happened after disconnecting the wired mouse.
Looking for great support soon.
Have a good day!

Do you mean the physical button or that tapping on the touchpad doesn't work?
- Peter

Touch Pad stopped working on my new Satellite C850

I have new Toshiba Satellite C850-b293 after a day may touch pad didn't work.
Can somebody help me? I check already the setting and I set into default, but still now changes.
Please help me....

On this virtual way it is not easy to help. We dont know what is wrong there.
Please be sure touchpad is enabled properly. Use FN+F9 key combination and be sure touch pad is enabled properly.
> I check already the setting and I set into default
I dont know what do you mean with default but if possible reinstall OS again and test touchpad functionality with clean preinstalled OS and factory settings.
How to do this you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

Satellite A300 - touch pad dead after BIOS 2.20 update

Hi,
exact model is Satellite A300 PSAGCA-06M01N running Win XP.
i had a problem with the webcam, and i read in the forum that it may be solved by a BIOS update. so i went ahead and downloaded the latest BIOS from the toshiba website specifically for my laptop model. it went completely well with no errors.
however when the computer restarted after the BIOS update my touchpad doesn't work anymore.
i went to the Device Manager and could still see the Synaptics touchpad device and it says "This device is working properly". but its totally dead and will not respond including the 2 buttons. before i updated the BIOS i had never had any problems with it.
Tried FN+F9 to no avail. plugged in a USB mouse and it works with no problems. In fact, when i plugged in the mouse the synaptics software said " Disabling the touch pad due to external pointing device" so the device driver for the touchpad is working.
if i remove the mouse it will say the touch pad is restored but it is still not working. rebooted many times and still the same problem. went into the BIOS and selected "Default" still a no go.
Can someone offer any advice or ideas please?
I really need the touch pad for the way i use the laptop...

Hi,
thank you for your reply. i already checked the BIOS setting for "Pointing Devices" and made sure its enabled. its the only setting in there that relates to the touch pad. just to make sure though i disabled it and then rebooted, after which i rebooted again and enabled it to no effect. i know this is not an isolated instance, as my search has turned up some with exactly the same problem. I'm really disappointed with Toshiba.
regards,

Touch Pad of Satellite P50-A-M13 doesn't work anymore - Solution

Hello *,
before someone should have the same problem, I wanted to share my problem and my solution here:
Information about my system:
I have installed Windows 8.1 Professional and Scientific Linux 6.5 in Dual Boot on my Toshiba Satellite P50-A-M13.
_*Problem:*_
The Touch Pad suddenly doesn't work below Windows 8.1 Professional anymore, the mouse pointer vanishes after a reboot. You can't deactivate/activate the Touch Pad with the F5 key (without pressing the FN-button) anymore. The white LED of the Touch Pad doesn't work anymore. Another operating system (in my case: Scientific Linux) in Dual Boot doesn't recognize the Touch Pad anymore after a reboot, too. So it isn't working below the other operating system anymore, too. It looks like a hardware defect since it affects more than one operating system.
_*Additional information:*_
If you attach an external USB mouse to your Toshiba notebook, the Touch Pad will work again, you can activate/deactivate the Touch Pad via the F5 key (without pressing the FN-button) below Windows 8.1 again, but the white LED of the Touch Pad still doesn't work and doesn't turn off or on. Same below another operating system in Dual Boot. The BIOS doesn't offer a feature that you can activate or deactivate the Touch Pad there.
Reason:
I had the problem that the feature "automatic driver installation" below Windows 8.1 Professional was activated. The driver for the Synaptic Touch Pad got replaced by a Microsoft driver in the background automatically.
_*Solution:*_
_Keep the external USB mouse attached and start Windows 8.1 if it isn't started already. Then deactivate feature "automatic driver installation" below Windows 8.1. Then reinstall the Synaptic Touch Pad driver from the download page of Toshiba website again. Then reboot Windows. The Touch Pad should work then again. And never, never activate the feature "automatic driver installation" below Windows 8.1 again!_
Many thanks, Jana

Thanks Jana for this post!
I also noticed that sometimes Windows updates could break the driver functionality...

Need Win7 Touch Pad Driver - Satellite A300D 13Y - PSAK4E

Hi!
Do you know when there is a touch pad driver for Windows 7 coming?
Cause my mouse scroll doesn't work...
Greez
Wendy

Hello Wendy
Please don't be mad on me but we cannot discuss on this way. If you want to have precise answer you must post your notebook model. maybe you have some old and not Win7 supported machine and this driver will not be relased at all.
So please post exact info and we can have serius discussion here.
Anyway, if you are missing Win7 touchpad driver try to install Vista driver.
I have done the same on my Satellite A300 and it works perfectly.
Bye

Satellite laptop touch pad scroll function

Greetings, New to the site, new to any kind of forum. Looking for advise. I have a Satellite laptop L300, I don't have a mouse, I just use the touch pad. (this is a brand new PC to me) Every once and a while while moving my cursor on browser or email application, the the pointer turns into an up/down area and the screen auto scrolls. I'm not sure how I am turning this feature on, but I'd like to know how to disable it? Also, is there somewhere I can download an owners manual for this laptop?
Thanks in advance for any help.
Mark

I figured out how to disable the scroll function.
Buried in some settings...
Thanks.

Satellite A660 - touch pad on/off and other buttons don't work

Dear People on this forum,
Recently, around 3 weeks ago i opened up my computer and i cleaned it, took the dust out because it was overheating.
around 2 weeks before I noticed that my touch pad is not working and the top buttons are not working, there is no light (wireless multimedia sound buttons) I cant turn them off/on or I either don't know how. I am not sure if the problem is because I cleaned my laptop and did not connect some wires back but I am including this detail because I don't use those buttons so I did not notice if they were on. but 2 days ago I am not sure how my wireless went off ant when I press fn+f8 (wireless) it says wireless communication switch is off, which is one of the buttons that is not working (at the top next to of/on switch including with my touch pad)
I have tried the following:
windows update
turn off computer take out all wires and battery and wait for around 30min. Then hold then on button for 30s
reinstalling the flash cards support utility, hw setup and value added pack
and finally a Toshiba out of the box recovery using the 2 product recovery cd's
I am not sure what to do next. it is either:
try something else
or is there a wire is connected to both touch pad and the buttons at the top and i should open up my laptop again and connect them.
please answer as to my next step to recovering my wireless.
Your dear member of the forums, kaujis
Message was edited by: kaujis

Please dont understand me wrong but I dont know how to help you now. Notebook disassembling is for authorized people only and if you do this on your own there is always a risk that something can be done wrong or maybe damaged.
OK I must also say that I have also disassembled my machine too but I was lucky and everything is OK as before.
I dont know how A660 looks inside but the principle is always the same and I cannot imagine you have damaged anything.
You know very well that we cannot say much about your problem. What you should do now is final functionality test and install original recovery image that you got with your notebook. Test functionality with factory settings. If the problem is still there, Im afraid you must open notebook again and check if everything is connected properly.
Last option is to contact service and ask for help.

Satellite P750 - touch pad and internet connection not working

Touch pad stopped working a few months ago and now can only get internet via the modem. Apparently need a new driver.
Where do I access this and how do I get the touch pad working again.

Hello
At first check what is the status of all hardware components (WLAN, LAN and touchpad) in device manager. Be sure all components are installed properly.
All necessary drivers you can download from Toshiba download page - http://www.toshiba.eu/innovation/dow...ivers_bios.jsp
It is not easy to say what is wrong with touchpad. Be sure the touchpad is enabled properly.

Touch Pad on my satellite A665-S6094

Similar Messages

Maybe you are looking for