Touch pad on & off doesn't work

I have the above notebook pc. Normally I use an usb mouse to navigate my notebook. I remember when first purchased the pc that the Touch Pad on & off light would work when I double tap, and I would connect the usb mouse.Now, when I double tap nothing happens. No light at all. The touch pad it self works fine even when the external mouse is connected.I'm just curious why it stopped coming on..........!

I have the above notebook pc. Normally I use an usb mouse to navigate my notebook. I remember when first purchased the pc that the Touch Pad on & off light would work when I double tap, and I would connect the usb mouse.Now, when I double tap nothing happens. No light at all. The touch pad it self works fine even when the external mouse is connected.I'm just curious why it stopped coming on..........!

Similar Messages

  • X220 Ultra Nav Touch Pad 'zoom out' doesn't work

    I can zoom in just fine, but can't zoom out. How to do this? Also, sometimes the 'zoom in' happens spontaneously when I am using one finger on the touch pad to move the cursor. How to fix this? Thanks!!

    Hi
    Welcome to Lenovo Community
    Please update   Ultra Nav drivers and utility
     http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6hgx58ww.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7vgq14ww.exe
    Hope This Helps
    Cheers!!!

  • Portege R930 - Touch Pad On/Off Button is not working

    Hi
    Brand new R930 (PT330A) and a minor but annoying thing ... the little button above the touch pad and below the space bar for Touch Pad On/Off does not work. I cannot find any configuration options for this anywhere. Fn-F9 works fine.
    No big deal but I like things to work! And this button would be handy for a quick switch.
    Thanks,
    Mark

    hi I am havng the same issue - I cannot disable my touchpad using the button above the touch pad or the F9 button and nothing in settngs to help. Ive folowed your link but says expired and when I try and find the driver to download says no results..........driving me nuts as touchpad so sensitive if you blow on it it moves. HELP

  • I can´t turn off my ipod touch and the camera doesn´t work

    I can´t turn off my ipod touch and the camera doesn´t work..How can i turn it off if any button works?

    That symptom is covered here:
    iPod touch: Hardware troubleshooting

  • How to reset my iPod touch thats disabled it doesn't work even charging

    How to reset my iPod touch thats disabled it doesn't work even charging

    If the sleep/wake button doesn't work use the home button and if the home button doesn't work it's the other way around, however if both of them don't work charge it with your connector connected with your computer or wall socket and it will turn on. Hope this helps.

  • Satellite A660 - touch pad on/off and other buttons don't work

    Dear People on this forum,
    Recently, around 3 weeks ago i opened up my computer and i cleaned it, took the dust out because it was overheating.
    around 2 weeks before I noticed that my touch pad is not working and the top buttons are not working, there is no light (wireless multimedia sound buttons) I cant turn them off/on or I either don't know how. I am not sure if the problem is because I cleaned my laptop and did not connect some wires back but I am including this detail because I don't use those buttons so I did not notice if they were on. but 2 days ago I am not sure how my wireless went off ant when I press fn+f8 (wireless) it says wireless communication switch is off, which is one of the buttons that is not working (at the top next to of/on switch including with my touch pad)
    I have tried the following:
    windows update
    turn off computer take out all wires and battery and wait for around 30min. Then hold then on button for 30s
    reinstalling the flash cards support utility, hw setup and value added pack
    and finally a Toshiba out of the box recovery using the 2 product recovery cd's
    I am not sure what to do next. it is either:
    try something else
    or is there a wire is connected to both touch pad and the buttons at the top and i should open up my laptop again and connect them.
    please answer as to my next step to recovering my wireless.
    Your dear member of the forums, kaujis
    Message was edited by: kaujis

    Please dont understand me wrong but I dont know how to help you now. Notebook disassembling is for authorized people only and if you do this on your own there is always a risk that something can be done wrong or maybe damaged.
    OK I must also say that I have also disassembled my machine too but I was lucky and everything is OK as before.
    I dont know how A660 looks inside but the principle is always the same and I cannot imagine you have damaged anything.
    You know very well that we cannot say much about your problem. What you should do now is final functionality test and install original recovery image that you got with your notebook. Test functionality with factory settings. If the problem is still there, Im afraid you must open notebook again and check if everything is connected properly.
    Last option is to contact service and ask for help.

  • Ipod touch 4th generation camera doesn't work after smashed screen replacement

    I have an ipod touch 4th generation that i smashed to screen with a torch, i got the screen replaced however my camera shutter will NOT open at all, i can go into camera roll and everything BUT the shutter wont open and the slide to go from camera to video just blinks a few times. Ive tried everything from turning it off and on(note my off/top button doesn't work) I had problems with the camera before i had the screen replaced but now it doesn't work at all. And will resetting and/or restarting it through iTunes delete ANY of the conent i have on my Ipod?
    Any help much appreciated as i can NOT afford to get it fixed at Apple!!

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    In that case take it back to the people who replaced the screen. They likely messed something up unless what broke the screen and broke the camera.

  • My phone touch pad (lower portion) is not working

    my iphone 4s touch pad's lower portion is not working..it is my new phone..when i dail the number i cant write 0 keys ..please help me

    Have you done the basic troubleshootings steps ? :
    Restart:
    1. Press and hold the Sleep/Wake button until the red "slide to power off" slider appears, and then slide the slider.
    2. Press and hold the Sleep/Wake button until the Apple logo appears.
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
    Restore from backup
    Restore as new.
    http://support.apple.com/kb/HT1414

  • Iphone 5 auto screen-off doesn't work sometimes

    it holds on until you don't touch the screen again. My device has already setted 1 minute time for automatic block but sometimes it doesn't work.
    Anyone with the same problem?

    Same here, 1 time at least that i have notice.
    Btw and i had experience the oposite, example: when i press the home button or on/off button to unblock the screen sometimes i have to press more then 3 to 4 times to appear image and unlock....
    anyone???

  • Satellite P750 - touch pad and internet connection not working

    Touch pad stopped working a few months ago and now can only get internet via the modem. Apparently need a new driver.
    Where do I access this and how do I get the touch pad working again.

    Hello
    At first check what is the status of all hardware components (WLAN, LAN and touchpad) in device manager. Be sure all components are installed properly.
    All necessary drivers you can download from Toshiba download page - http://www.toshiba.eu/innovation/dow...ivers_bios.jsp
    It is not easy to say what is wrong with touchpad. Be sure the touchpad is enabled properly.

  • Touch Pad on 6550b Just stopped working...

    I have an HP Probook 6550b and the touch pad just all of a sudden stopped working. I've reinstalled the driver but still not working. It shows up in the device manager but not in the Synaptics list of devices. I've even done a system restore thinking maybe an update messed it up but still nothing. Anyone? 

    have a similar problem with 6550b. i can move the cursor and use the right-click button. however, left-click button and tapping on the touchpad don't work. same thing in BIOS and in windows (after reinstall)
    it happened after a restart and at the same time windows crashed to the point no system restore worked. any comments from HP? as usual, my warranty ran out 3 months ago.

  • IPod Touch 4G Home button doesn't work

    I bought my iPod Touch 4G in January of 2011, so I've had it for a little over a year now.
    Recently, the home button has been finicky (I had to press it repeatedly for  it to respond sometimes) and today it stopped working all together. I restored it, hoping that it was the iPod itself, but it still doesn't work. It's not stuck or anything, because I'm able to press it all the way down.
    If I were to take it into the Apple store, would I have to pay to have it fixed (I never bought a warranty)? I've never dropped it or anything either.

    Try this previous discussion:
    FIX for iPod Touch Home Button: Apple Support Communities
    Apple does not repair your iPod. They will exchange yours for a refurbished one for $99, $149 or $199 depending upon the capacity.

  • TS2634 Ipad 3 cover fault - magnetic switch off doesn't work. Anyone found a way to make this work please?

    Ipad 3 cover fault - magnetic switch doesn't work to switch off ipad when cover is closed. Anyone found a way to make this work please?

    Has this problem just cropped up or has it been there all along.
    The iPad 3 requires a Smart Cover with magnet aligned only in a certain way. This was not the case for the previous models of iPads. So some older covers will work with the newer iPads because their magnets just happened to be aligned just right. Other covers will not.

  • Y50-70 Touch Built-In microphone doesn't work

    Hi,I recently bought a Lenovo Y50-70 Touch and after couple of weeks I tried to skype and realized that the microphone doesn't work. I tried to uninstall and reinstall the driver and also I checked the microphone level in the mixer but non of them solved the problem.Can someone help me with this problem? How can I send my laptop to be physically checked?Thank you!

    I have this problem as well. I installed the latest Realtek audio driver and that had no affect. Not sure what to do - everything is updated - SP3, bootcamp version...

  • Touch Pad is enabled but not working

    I have just this minuet reinstalled Win XP and the touch pad is not working and I cant work out what is coursing this problem....
    The Toshiba console is saying that it is enabled but it is not working? Help!
    p.s.
    I bought 512 MB of RAM for and I cant get it to go in..
    Any help would be grateful.
    Thanks dazmo b

    On this way I can just tell you to check touchpad settings and FN+F9 key combination.
    About memory upgrade I can not tell you much because i dont know which notebook model you have.
    Bye

Maybe you are looking for

  • Can't open patch package to uninstall Acrobat Reader

    I need to uninstall the current version to troubleshoot why my pdf files aren't (suddenly) printing to a printer that works otherwise.  Am getting the message about this patch package.  What can I do?

  • Error in Start Modeler BI-IP

    Hi Experts,            I am working on BI-IP when I go to Tr.RSPLAN and click startmodeler it is rooting to this page http://portal-dmb.wdf.sap.corp:50100/webdynpro/dispatcher/sap.com/biplanworkbench1/Modeler and no page is retrieved.Pls suggest what

  • Out Of Memory Issue while dowloading infomraiton from DB to XML

    Hi, I am converting the Database tables into XML file format using Java IO and SAXP. I am keeping all XML files in download folder. But, while downloading process i am getting Out Of Memory Error. When i tried to download the real data, the download

  • Changing Users default Schema

    Hello, I'm trying to add a new user to my DB giving him the Schema of an old user as his default Schema. Can somebody tell me how to change User2's default schema to User1? Thanks in advance, Gregor

  • Adobe Flash Crash Problem Windows 8.1 FireFox

    I have had an issue with not being able to watch any video's or play games on my computer due to adobe flash constantly crashing. I have an HP computer- 64 with windows 8.1 and I use Firefox.  I thought I resolved the issue when I uninstalled and the