Touch Panel for Xperia Z1

Hi,
Can you please tell me how much will the touch Panel cost for my Xperia Z1? I've been informed that the part is not covered under warantee. Can you please explain it to me as why th etouch panel is not covered under warantee?

You have to contact your local xperia team,we do not know how they will judge your device:
http://www.sonymobile.com/global-en/support/contact-us/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

Touch Panel replacement for Ipod Touch 3G 8go

Hello,
My touch panel is crashed and i want to replace it.
I would like to know if there is a difference between touch panel for my model 8Go and these for 16 and 32 Go.
Thank you in advance
Greg

... and what Illaass did not mention is that there is no such thing as an 8GB 3rd gen Touch.
So if your Touch is 8GB, it's either a 4th gen (unlikely if you think it's 3rd gen) or more likely, a 2nd gen Touch. If you are ordering parts for your iPod, you will need to be accurate about which model you have or the parts may not fit or work.

Compact Field Point with Touch Panel

Hi.
Have anyone designed a NI Compact Field Point or Compact RIO with a connected Touch Panel Monitor?
I have an instrument with RS232 output (serial data). Since I am using LabVIEW 8,
the executed application should run in Embedded WinXP. But, I need a touch panel for control and monitoring.
I would appreciate any advise please.
Thanks in advance.
Bon

Hey Bon,
What kind of information are you looking for? NI sells a TPC 2006 device which is a touch panel and runs windows CE. This device can be programmed using LabVIEW PDA. This device has a Ethernet port so that you can also communicate to the cRIO or the cFP. Is this what you are looking to do? You can call in on (888) 280-7645 and a sales person would be able to understand your application much better and advise you accordingly.
Regards,
Chetan K
Application Engineering
NI

How to modify a combo box for touch panel operation?

Hi,
I'm developping a touch panel controled application.
The first step of the application is user log-in. My application has a small database of names that the user can access via the drop down menu of a combo box.
My problem is that the arrows and the slider of the vertical scroll bar are way too small to be fingers-operated:
Is there a way to modify the size of this scrollbar so that it's not too small for the operators' fingers?
Best regards,
peper

Hello peper,
As far as I know this is not directly possible (a least not with the control editor).
If you want to, you could also create your own "adapted" control yourself through an XControl.
This one can then (for example) combine a name input, a button and a listbox (with a big vertical scrollbar).
Or is this too far fetched?
Kind Regards,
Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
CLD, CTA
If someone helped you, let them know. Mark as solved and/or give a kudo.

Can i get a new panel for my ipod touch 2G???

My ipod's panel is full of scratches.. i'm searching for an original new panel for my ipod touch.. its 2G.. it doesn't have a camera, neither bluetooth.. But i just want to know whether there is available..

This place will sell you one for $30. You can find others by Googling for iPod repair.
http://www.milliamp.com/2nd-gen-ipod-touch-repair.html

Where to buy touch screen for Sony xperia z1

where to buy touch screen for Sony xperia z1
Hello Help me!
Faced with the problem of maintenance.
I busted my phone touch screen. And I do it or who can not be repaired.
Tell me where to order and buy (delivered to Krasnoyarsk in Russia) touch screen on the Sony Xperia Z1????

We do not sell the individual components of our handsets to prevent unauthorised repairs of our handsets as this could lead to further damage of the device, voiding of warranty and even personal injury if the handset is not repaired correctly. With this being the case I would advise you to contact your local Xperia Care team to have this arranged for repair by an authorised repair agent.
Don't forget to mark posts that answers the topic as Accepted Solution.
If you find any post helpful, press Kudos.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

LabVIEW Touch Panel Module for Linux

Hi,
Does NI released Touch Panel Module for Linux?
Thanks,
Ali

Hi Dennis,
Here is the article I read about LabVIEW Embedded Development Module. Page 1-1, "Taking Your Graphical Design to Any 32-Bit Microprocessor".
http://www.ni.com/pdf/manuals/371233b.pdf
About the topic you are right. I have the VI on Windows XP. I converted it to WinCE 5.0 with LabVIEW Touch Panel Module and it works perfectly. I have LabVIEW for Linux and I converted the VI to Linux and it works on PC. Now, I want to convert it to Embedded Linux that works on ARM microcontroller.
I am looking for LabVIEW Touch Panel Module for Linux because the only supported platform for that is Windows.
http://www.ni.com/support/labview/lvtool.htm#touch
Thanks,
Ali

Function palette icons different for Touch Panel project

When I first installed LabVIEW (v8.5.1) the FieldPoint I/O palette did not show up when I tried to create a Touch Panel project. It did however show up if I simply opened the VI itself (which I created when I created the project) instead of opening the project. I decided to write the entire VI in that manner and would simply import it into a new project when I was finished. I recently finished writing the VI and imported into a new project I created. However, when I try to run the program it doesn't work. I also just noticed that the Merge Errors icon doesn't show when working in a project, but does show if I only have my main program VI open. Does anyone know why this would be the case? I think I have everything installed correctly, although with so many add-ons/toolkits/drivers I am not 100% positive. I'm trying to figure out why my program doesn't build correctly and thought I would start here. I don't know if that is the cause of my build problem, but any insight or help would be greatly appreciated.
Cheers,
-John

Hi John,
Touch Panel VIs do not support all of the functions or controls normally found on the LabVIEW palettes. In the LabVIEW Help, if you browse to Touch Panel Module >> Creating Touch Panel VIs, there are topics called "Designing PDA and Touch Panel User Interfaces" and "Developing PDA and Touch Panel Block Diagrams." Differences in Touch Panel controls, indicators, functions, properties, and methods are documented here.
When a VI is opened as part of a project under a touch panel target, the Functions and Controls palettes change to display only functions and objects that are supported. You will notice that some VIs, such as Merge Errors.vi, are missing, while others, such as PDA Error Handler.vi, are added. If the VI is opened outside of the project, it isn't specified as a Touch Panel VI so the standard palettes are visible. I prefer to develop my VIs under a touch panel target to make sure I am using supported functions.
Hope this helps clarify things.
Jennifer R.
National Instruments
Applications Engineer

I2c-hid.c for android touch panel driver

hi,
a question about touch panel driver. it goes i2c hid, i saw the code,but i dont know its framwork in Android. Please tell me something about it.
thanks......

hi,
a question about touch panel driver. it goes i2c hid, i saw the code,but i dont know its framwork in Android. Please tell me something about it.
thanks......

HT4759 i downloaded the icloud to my pc it says to login with apple id and it says it is a valid apple id but not cloud but i cannot get the control panel for icloud to come up to set it up on my pc which runs windows 8

i downloaded the icloud to my pc it says to login with apple id and it says it is a valid apple id but not cloud but i cannot get the control panel for icloud to come up to set it up on my pc which runs windows 8

An update.
From iCloud Control Panel 2.1.1 for Windows
"iCloud Control Panel 2.1 and later includes support for Windows 8"
but you still need to set it up on a Mac or iOS device, "Note: To create an iCloud account you need an iPhone, iPad, or iPod touch with iOS 5 or later, or a Mac with OS X Lion v10.7.5 or later."

Using a Meter control in LV Touch Panel, and using shared variables that are custom controls.

I Just started using LV touch Panel module with an NI TPC-2106.
I have two differenct problems:
1) I was planning on using the "Meter" control quite a bit. I can set up the meter exactly how I like on the host PC, but on the touch Panel computer it seems to ignore my adjustments, mainly the start and end of the scale - i.e. I would like control to run from 0 to 360 with 0 straight up, using the entire circle. However, on the Touch panel computer it always puts 0 at about 7 o'clock and 360 at about 5 o'clock. I have also tried adding markers to no avail.
2) I am communicating with a compact fieldpoint controller. I can creat a shared variable that is a simple double with no problems. However, I have some shared variables that use a custom control for the variable type - bascially a cluster with a couble doubles, a time stamp, and an enumeration. It lets me drag the shared variable into my diagram, but it seems to ignore it when I run it.

Ipshita_C,
- I am using LV 8.6.1f1and LV Touch Panel 8.6.1.
- I have attached a simplified VI that shows how I want to use the meter. Notice that the placement of the endpoitns does not work correctly on the touch panel, and that it ignores the arbitrary markers that I placed.
- I also have included an XY graph control that displays on the TPC with margins around the graph area that I removed from the graph control.
- For the shared variable, it appears to be an issue related to the touch panel, not fieldpoint. I found another thread in this forum that mentioned that clusters containing Enumerations do not work in shared variables on the touch panel. I changed the enumeration to an integer and it now works fine.
In general, there seem to be a disappointing number of limitations in the touch panel implementation. My biggest concern is that I have not found any documentation from NI that lists these limitations. I seem to have to try things out and see what works and what does not work. Can you point me to a comprehensive list of touch panel modules limitations?
Attachments:
test 2.vi ‏10 KB

LabVIEW Touch Panel -- I can not get activesync to connect between the TPC-2012 and my XP workstation. There is no USB client connection on TPC-2012

How do I get the TPC-2012 to connect to my workstation? I have read all the hardware manuals, getting started manuals: nothing works. The remote access using http://x.x.x.x/RemoteAdmin does not work. I have tried to get the FTP service working using the instructions in "How do I configure the FTP server on tpc-2006 and TPC-2016" . Active sync seems to want a USB connection only. I have tried to connect a serial line between com1 on the TPC and com4 on my XP workstation with no results.
I have been able to use the touch panel module with my iPAQ. It worked flawlessly the first time.
Help!
Louis Prugh
General Dynamics

Hi David,
thank you once again for your help.
So when viewing your Local Area Connection>>Status
you're seeing data packets sent but no packets received on your desktop
machine? - Yes
Is your desktop configured with a static IP address or is it
configured to obtain an IP address automatically?I' ve tried both static IP address and that it obtain IP address automatically, I have also done it with the TPC.
Also, does your TPC
get a valid IP address when the connection to your desktop is present? - when TPC is set to obtain adress automatically it gets IP address and then after some time it loses it - it is set to 0.0.0.0, and then it obtains the IP adress again and so on.
Can you provide the address, subnet, and gateway you're getting for
both machines?- I've done it, but it didn'e help
Also any firewall settings or exceptions you may have
active if the firewall is enabled? - firewall is disabled
I'd also like to know what
modules and toolkits you do have installed on both the TPC - TPC is new and I haven't installed there anything.
On my desktop - I have standard Labview 8.2,the real time module is installed. All I know, there are already drivers for TPC2012 in this LabView version. On the included CD I have only drivers for another TPCs.
Thanks,
Martin

Multimedia touch panel buttons on Satellite A500 are not all working

Hello,
I recently purchased an A500 (PSAR9A-02J001) laptop running Windows 7 (32-bit) Home Premium. Not all the top Multimedia touch panel buttons are working. When buttons are pressed, the laptop makes a beeping sound (which is normal) but the corresponding function is not executed.
For example, the Eco button at the top doesn't switch on/off the eco and the mute button does not mute the volume.
Device manager shows all devices as working correctly.
There are no errors in the Event Viewer Application or System logs.
Please advise!
Thank you,

Hello
Try please to reinstall Toshiba value added package.
Remove preinstalled version, restart your notebook and install latest version from Toshiba download page.

Touch Panel Shared variable binding does not work.

Hi,
Is there any reason why shared variable binding is not working under Touch Panel Target?
Is there any plan for implementing or there is some trick I should know?
Andras

RebeccaFo wrote:
Hello Andras,
which version of LabVIEW are you using? As yu can see in:
http://digital.ni.com/public.nsf/websearch/04AAA6903A9456F08625715A0026BC57?OpenDocument
it should work. So what for problems do you have?
Thanks,
Just FYI, the KnowledgeBase article linked above has been revised and moved to a new location. See the new KnowledgeBase 58JFBGD2: Are Shared Variables Available For LabVIEW Mobile Module (Formerly PDA Modul...

Touch panel fonts and Graphics

Gentlemen
In addition to my previous issue, I would like to ask regarding touchpanel TPC-2006 fonts and graphics. See, for our client we plan to give four screens in touch panel and in one screen it is with list of alarms. So here when list box control is drag n drop into front panel its showing horizontal and vertical scroll bar perfect,but when deployed to touch panel its surprise horizontal screen bar not seen this is one issue and also all fonts are not clear and things that seen in front panel when deploy its not shown in TPC why? is there any way if so please help me
I Have attach snap shot of it see in that in my front panel screen i hv got horizontal scroll bar, column header but in touch screen couldn't get all this. hope it will help to get better idea .
thanks
Attachments:
Front panel.JPG ‏59 KB
touch panel screen.JPG ‏21 KB

The graphics and font rendering in the touch panel module is a known issue.
As you have found out, the rendering of text and graphics on the TPC platform is not the same as running under Windows. The only way I have found to work around this issue is to continue to play around with the layout on the panel until you get acceptable results on the TPC.
I had an application a couple of years ago that was deployed to the TPC-2006 platform. When all was said and done, in order to get an acceptable looking panel on the TPC-2006 the windows panel looked severely misaligned in some areas.

Touch Panel for Xperia Z1

Similar Messages

Maybe you are looking for