Touch panels not under targets and devices

Hi All,
I've used the NI touch panel module before with Labview 8.6. I now have Labview 2009 and have installed the touch panel module 2009. When I open a project and go to add targets and devices I have no option to expand touch panels as I did in 8.6. The module appears in Max and in my license manager.
Any suggestions to what I can try? I have tried reinstalling the module.
Thanks,
J
Attachments:
targets and devices.JPG ‏19 KB

JChec,
That is strange! If you go to Help»Find Examples... from within LabVIEW you can open up the Example Finder. In the Browse tab of the example finder there are many folders that populate the center column. Two of those folders are "Toolkits and Modules" and "Toolkits and Modules Not Installed." Which folder does the Touch Panel Module show up in? Are you able to open up and run one of the examples? What Operating System are you using?
Message Edited by Ben S on 02-16-2010 11:56 AM
Ben Sisney
FlexRIO V&V Engineer
National Instruments

Similar Messages

  • My ipod touch is not list as a device on itunes.  When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

    My ipod touch is not listed as a device when connected to my computer.  As suggested I attempted to download the latest of itunes.  I got an
    ox8007054f error code and the down load will not complete.  I have also tried to restore my computer to an earlier setting, but it will
    not accept the change.

    Have you looked at this completed previos discussion. It discusses 0x8007054F.
    Re: Error message when trying to install iTunes

  • New "Targets and Devices..." dialog does not open in Project window

    Hi I am trying to add an FPGA device in my project, however when I right click on Project, and go to New -> Targets and Devices...It appears as though it is busy (the mouse icon becomes the hourglass) and after while it just goes back to normal and nothing seems to happen. I have an FPGA device installed which is the RIO card PXI-7831R, and the devices seems to be working fine. When opening a project that already contains it as a device, it is displayed fine. Its just the dialog to add new devices and targets does not appear. I have tried Repairing NI Labview 8.0 and NI Labview FPGA Module, but the problem still exists. I would appreciate if anyone has any idea as to why this is happening and how to resolve it. Thanks!

    Hi Kewsvnet
    So you have tried the device on another machine and it works fine, is it only on a specific machine that this issue is occuring on? I think I misunderstood the issue yesterday, am I right in understanding that when you click on 'New Devices and Targets' absoloutely nothing happens apart from the 'hour-glass' appearing for a while? If this is the case it maybe the case that LabVIEW may have become corrupted in some manner. Repairing it will not solve an issue like this. What you should try is to force LabVIEW to create a new .ini file, which holds all the configuration settings. To do this you need to rename the .ini file so that when LabVIEW starts it will detect no .ini file an create a new one.
    The .ini file can be located via C:\Program Files\National Instruments\LabVIEW 8.0\ LabVIEW Configuration Settings (it is a file size in the range of 2Kb - 10Kb)
    You need to rename this file 'LabVIEW Backup', then attempt to restart LabVIEW and a new project and try to add a target.
    Let me know how you get on
    Kindest Regards
    YatinM
    Applications Engineer
    NIUK & Ireland

  • I have the latest version of itunes but my ipod touch is not shown as a device, previously been connercted to an ipod nano and now have the new touch.

    I have the latest version of itunes but my ipod touch is not shown as a device, previously been connercted to an ipod nano and now have the new touch

    Try here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    or
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    A Nano and iOS devices (iPod touch, iPad, iPhone) use different drivers.

  • I-pod touch is not getting sync and the error message is coming as "i-tunes couldn't connect to i-tunes store. An unknown error occurred (-3212).

    Hi
    My i-pod touch is not getting sync and the error message is coming as "i-tunes couldn't connect to i-tunes store. An unknown error occurred (-3212).
    I have updated the latest OS 6.0 in my i-pod touch.
    Kindly send the solution
    Regards
    Deepak
    <Email Edited By Host>

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    Also, you are not addressing Apple here. We are all just users like yourself.

  • Can't ad compact fieldpoint to a project. Targets and devices button is missing

    Hello,
    I am using Labview 8.5 evaluation and a compact fieldfoint. I can see the fieldpoint in measurement and automation explorer and i can see the measured values comming form the different modules, so this works fine i gues.
    The problems start when i want to use the fieldpoint. I can't ad it to my project!!. Normally you right click on the project and then you see the buttons new and targets and devices. In my case i can only see the button new, there is no button Targets And Devices. How could i solve this problem??
    Greets,
    Adrie

    Hello Adrie,
    Thank you for your forum post. Bad to hear about the problems wit fieldpoint. Can you look which fieldpoint driver you are using? You are able to find this in the Measurement and Automation eXplorer (MAX) under software. Its possible that your version isn't compatible with Labview. Please find the latest driver under this link.
    I know that our evaluation software loses functionality after a while, so how long is your trial running at this moment?
    Please let me know if the new fieldpoint software doesn't work.
    Best regards,
    Martijn S
    Applications Engineer
    NI Netherlands

  • HT201263 My ipod touch does not restore properly and comes up with an unknown error (9). What do I do?

    My ipod touch does not restore properly and comes up with an unknown error (9). What do I do? I have tried restoring it a few times and it keeps coming up with this error. Yet on Itune on my computer, it tells me that the ipod software is up to date. ipod screen is just showing the itune logo and a usb connector.

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    http://support.apple.com/kb/TS3694#error9

  • My ipod touch will not switch on and is no longer recognised by itunes.  Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.

    My ipod touch will not switch on and is no longer recognized by itunes.  Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.
    I tried to restore it and I got error code 2009, so I closed it tried again got error code 1659, now it wont do anything and it's not recognized by my pc /itunes please help x

    For the restore error messages try:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • Can't see add targets and devices in project explorer

    Hello!
    i think I have a strange query. i have Labview 2010 evaluation version. i am trying to add my cRIO 9004 to a project. I am just trying to follow the instructions in the getting started with cRIO manual. it says, add crio to the project by right clicking root project and selecting NEW>>ADD TARGETS AND DEVICES. The problem is I see the link for NEW but once i click that i dont see a sub-link "add new target or device" appear, INSTEAD i see the dialog box for  opening a NEW LABVIEW FILE appear. every where in the forum/knowledgebase/support trouble shooting and getting started articles have mentioned right-click root project>>select NEW>> select add target or device>> , as if it IS SUPPOSED TO APPEAR STANDARD in all new projects! But I dont see it! i dont get what I am missing. The software version i have are below:
    on cRio:
    NI VISA 5.0
    NI RIO 3.0
    LV RT 8.6
    and it matches with what i have installed on my host computer.
    I can communicate with the cRIO device both using MAX and also using ping command in windows command prompt.
    Any help would be great!!
    Thanks!
    Rajesh
    Solved!
    Go to Solution.

    well yes! it didnt strike me though that i had to reinstall my LV addon modules as you had mentioned drivers. anyways thank you!

  • I pod touch will not turn on and will not charge - just died - did not drop or spill water on it - HELP

    I pod touch will not turn on and will now not charge - just died - did not drop or spill water on it - HELP.  When I plug it into I-Tunes it says the IPOD is in recovery mode

    Have you tried to restore the iPod via iTunes on the computer? See the restoring topic on:
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
    If not successful, what happens when you try to restore the iPod?  Any error messages?

  • La carpeta WSN Gateway no se muestra en Add Targets and Devices

    Hola, buenas tardes, estoy haciendo una red de sensores inalámbricos y ya logré la comunicación de la NI-9792 con el servidor y con los nodos. Lo único que me falta es hacer el proyecto en LabVIEW para comenzar a sensar, pero en la ventana de "Add Targets and Devices" no aparece la carpeta WSN Gateway. ¿Cuál podría ser el problema? Anexo imágenes con el ideal y con mi situación.
    Attachments:
    Ideal.JPG ‏29 KB
    MAX.JPG ‏139 KB
    Project.JPG ‏157 KB

    Hola Archie Flores,
             Lo más probable es que sea un problema de compatibilidad de software. En la siguiente página puedes consultar las versiones que están soportadas para el hardware que estás utilizando, así como para el mismo software. Asimismo, es importante que revises el orden de instalación correcto del software necesario.
    http://zone.ni.com/devzone/cda/tut/p/id/12734
             Una vez comprobado esto, puedes utilizar un ejemplo previo para ver si de esta forma puedes utilizar el hardware o te marca algun error. Los ejemplos los puedes obtener de los que se instalan junto con el software de National Instruments o el de la siguiente página.
    http://zone.ni.com/devzone/cda/epd/p/id/6480
              Espero que esta información te sirva para resolver tu problema. Si llegas a tener alguna pregunta no dudes en escribirme.
    Saludos,
    Héctor Rojas

  • My Ipod touch will not start up and the menu will stay in I tunes!

    My ipod touch will not start up and the menu will stay on menu of Itunes. Who can help me?

    Hi,
    Have you tried a hard reset of your iPod?  Press/hold the home and sleep/wake buttons down until the Apple logo appears. 
    Hope this helps! 
    ---likeabird---

  • IPod Touch will not power up and will not respond to itunes when plugged into a computer

    iPod Touch will not power up and will not respond to itunes when plugged to computer, have tried holding both buttons down for 10 secs like support suggest but nothing has happen. Any suggestions?

    Try the other actions here:
    iOS: Not responding or does not turn on

  • TPC-2006 Not Listed in Targets and Devices

    Dear All,
    I configured the TPC-2006, assinged the IP address, through that address i can share the desktop, also i can communicate through USB Cable. I Installed the CD come with my TPC-2006 package. For me it is communicating with my PC and vice versa.
    But when i try to add this device to my project using the Project==> Add Devices, It is not showing the Touch Screen Panel in the exising Devices List.
    Should i need to install some software to be visible in "Exisiting Devices List".
    Even its is not visible on the MAX on the Remote Devices List.
    Please Help me out.
    Atif

    The Touch Panel Module is not appearing under Measurement and Automation Explorer?  That is strange. 
    If it is not appearing, we need to verify that it was installed.  It will also show up under Add or Remove Programs >> National Instruments Software, and under the NI License Manager under Start >> National Instruments >> NI License Manager:
    If it is showing up here, than the installation may not have been registered with LabVIEW or MAX.  In that case, we will need to repair the installation of the Touch Panel Module 8.2.1 (Assuming you are using LabVIEW 8.2.1).  Also keep in mind that, you must have the same version of the module as your version of LabVIEW.  8.2 will install to LabVIEW 8.2, the TPC module 8.2.1 will install support for LabVIEW 8.2.1, 8.5 for 8.5, etc. 
    The TPC 2006 ships with Active Sync and some drivers from the manufacturer, which will allow you to see the TPC through Active Sync, this does not mean you can target it with LabVIEW.  For this we need the Touch Panel Module.  So I want to make sure that we have the correct version installed.  I hope that this makes sense.
    Message Edited by Coal Man on 08-23-2007 04:44 PM
    Brian Coalson
    Software Engineer
    National Instruments
    Attachments:
    MAX.Jpg ‏105 KB
    Add or Remove.Jpg ‏50 KB

  • [Solved] GT70 fast access touch panel not working

    Good Morning/afternoon/evening
    I did terrible mistake by reinitializing my SSD drive which caused me to lose the OEM partitions, my Laptop used to take 3 secs to boot but now it takes up to 6 secs.
    back to my main issue,
    1- the upper touch panel is not working and I cannot use turbo button.
    2- after reinstalling windows 8.1 I got unknown device with HW ID "ACPI\VEN_ENE&DEV_0110"
    I tried to install all drivers and utils but without luck.
    best regards

    Quote from: BlueAlexFPS;103334
    I don't think you need to update EC, just install the SCM and it will works.
    did not solve the issue
    I tool it to service center already
    - - - Updated - - -
    Quote from: Tobi;103361
    Does all the quick launch buttons can't work properly? or just one? Does the button light on when you press it?
    and which Turbo button do you mean? the G button? or the cooler boost button?
    yes all of them when you press any button does not light up, I meant the cooler boost button

Maybe you are looking for

  • Why cannot i not connect to wi-fi?

    since the latest update on my Iphone I have unable to turn on my wi-fi, the whole wi-fi section is 'greyed out' and unable to change 'off' to 'on'

  • 12 powerbook or 14 ibook for Final cut?

    which is a better for final cut express HD a 12 powerbook or a 14 ibook? which one should I buy (refurbished of course)

  • Checking for updates.... forever...

    Every time I connect to my PC I'm getting the above, but it NEVER provides an update, just keeps "checking".  My phone also tells me there's an update available.  Anyone know how to resolve this? THANKS

  • HT201263 How do I reset a forgotten restrictions passcode

    How do I reset a forgotten restrictions passcode?

  • Save Exceptions Memory Issue

    I'm currently using a bulk collect (limit = 100) and a forall insert to load roughly 6.2 million records into a table. If I leave the "Save Exceptions" clause out of the procedure, all 6.2 million records are loaded without an error. THe amount of me