Touch screen classic

my bb classic touch screen some times will stop workin or it will work by itself .
when this thing hapens the keypad work properly

Any damage to the screen? Scratches?
Do you use a screen protector? Still have the factory protection on it?
These elements could cause random behaviour of the screen.
Does it happen in specific circumstances like using one single app or browsing the web for instance?
Please don't forget to mark as "solved" if your question is replied and to "like" a useful reply to your post ;-)

Similar Messages

Is Classic truly classic -- touch screen disabled?

I HATE iPhone. I want to switch back to Blackberry. I want something that is as un-iPhone as I can get.
"Classic" sounds like exactly what I want -- to me, "classic" means keyboard, and a "no surprises" screen Touch screen disabled always, all modes, never, nada. Perhaps I have a little less dexterity than most, but I cannot stand the constant surprises from touching the screen while picking up the device, shifting attention from one place to another, pulling the device out of my pocket, the bumps that happen during phone ring, etc. etc. There are many comments in the forums that articulate my concerns precisely.
Can I disable the touch screen totally, permanently, all modes? If not via a mode setting, can I leave a bit of water on it overnight to saturate the capacitors and disable it that way? A weak acid like vinegar? Is there a wire to cut?
If I can't disable touch screen on Classic, what device should I get -- what's the latest model with a "no surprises" screen -- 9780?
Thank you.
Solved!
Go to Solution.

No, you cannot disable the touchscreen.
But you'll love the Classic, it is, as you say, totally unlike any other device.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Touch screen problem. BlackBerry classic

Hi everyone. I've problem with my BlackBerry Classic. The touch screen often doesn't work. When I unlock the device the touch screen is blocked and only work the trackpad and keyboard. I can't use the screen. When I tap on the screen nothing happen. I must block it and unlock several time to work well again. I did a hard reboot but the screen doesn't work properly. Can you help me? Thanks a lot. Nicheloro

The problem could be with the software or hardware, I would book it in if in warranty

Touch Screen Retrofit for iMac9,1 Screens

I am currently conducting research on virtual organs using the Hauptwerk/Classic MIDIworks systems. These are heavily dependent on touch screens. According to Darryl Wood of Classic MIDIworks " . . . there are a lot of switches inherent in organs. There's no way to implement that many physical switches, multiplied by all the different sample sets, practically or economically." This is why touch screens are recommended. That is to forgo the expense of independent drawknobs ($25 to $50 each) to say nothing of all the pistons, couplers, swell shoe displays and memory level displays that would cause a $7,000 organ project to drastically escalate in cost. I have found a retrofit in the form of the 3M MicroTouch System 3250EX. This is a surface capacitive touch system based on the 3M MicroTouch Controller EX and optimized for displays ranging from 6.4 to 32 inches.
If you do not recommend the 3M system, please send a list of touch screens and necessary connection hardware.

Hi @Bobi617 ,
Welcome to the English HP Consumer Forums!
Please feel free to post a revised message in English.
I understand you are having issues after a possible update on your HP Notebook and your touchscreen not responding. You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
Here is a document on troubleshooting the Touchscreen if the system restore does not help.
Thank you, and have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Looking to Buy iPod touch or Classic

I am thinking of buying an iPod, either a Touch or Classic. But the specs call for a USB 2.0 port. I have an eMac (see specs below). Would I be able to buy a current generation iPod with the type of USB I have? When I called the Apple Store they told me it was not compatible with my computer and I would need to buy a new computer with a 2.0 USB. Is this true? Any suggestions?

Some of the key advantages and disadvantages of the iPod touch are as follows:
Advantages.
Larger screen for video playback
Safari Web Browser and WiFi for web access at any WiFi hotspot/home.
Flash memory is faster
Beautiful interface
Add, edit and remove Calendar and Contacts
Add, Edit and Email Notes buy they don't sync to Mac/PC
Add 3rd party apps (from Feb 08 - cost???)
Flash Memory is much less prone to damage.
Email access in WiFi hotspots, offline composing and read of email
Google Maps and Directions (one prepared set of directions isavailable offline)
Weather and Stocks widgets
Disadvantages
No disk mode
Reduced battery life
No offline Games (until Feb anyhow)
No To Do function
Unable to view Podcast notes.
Much smaller storage
In the end it depends on your needs. Go to the shop and try the touch. If you don't get the "wow" then perhaps go for the classic this time.
cheers
mrtotes
Message was edited by: mrtotes

Thinkpad T430s with Multi-touch screen?

I'm currently using a Thinkpad T410-i7 and am considering upgrading to the T430s.
However, I'm interested in the Multi-touch screen option that was available with the T400s/T410s.
Is anyone aware if this option is available in the T430s?
Konker

@ wesleyyin,
certainly strange. Some questions to help with the diagnostics;
Which TrackPoint cap you you have on your keyboard, soft domed, soft rim or classic domed (the hairy one)?
Can you try disabling the TrackPoint to see the problem goes away?
Anything else laid on top of the system or between screen and keyboard like a thin cloth or something?
Thanks
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Windows 8.1 and touch screen availability

I'm used to use Windows 8.1 and could be interested in a W540. I've however observed, that W540 is only being shipped with the one year older Windows 8 despite Windows 8.1 was actually RTM'ed before W540 began shipping.
Will there be W540 announced with Windows 8.1 or W540 stops with Windows 8?
Nobody needs to respond that I can just upgrade to Windows 8.1 because I don't want to fiddle with the imperfections caused by this.
Will W540 be released with a touch screen or it'll stay with a classic non-touch "output-only" screen?
Best regards,
Henrik Dahl

First, the rumor is that touch on the W540 will be available H1, but not earlier. If you look at Dell's M3800 with touch, they have delays until mid-March with their Retina touch panels, so it'll take a while for the W540 to be available with touch. It is also possible that the W540 won't be available with touch until Intel's Haswell refresh comes out, but who knows.
Second, if you install the Windows 8.1 upgrade, please take care to check the "Brick your W540" thread, as there is something wrong with the bios and Intel Rapid Start-up Technology. It may result in your motherboard's failure, so disable RST before doing so.

ITouch touch screen response

I upgraded to the 32GB Touch and picked up a good mount for my Harley's handlebars to replace the one I had for my old 80GB Classic. I found out that the Touch won't respond if you are wearing gloves. It works great for bare fingers, which will be 90% of the time I'm on my bike so it's not a huge deal to me but according to the Touch tech specs, it's supposed to have a extremely well built touch screen. Shouldn't it respond to pressure and not just bare skin ?

When restoring to factory defaults/new iPod fails to resolve a problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple Store.

Problem push and hold on a Surface Pro tablet's touch screen

Hi,
I tried posting this before, but I can't find my origional post so I hope I'm not spamming accidentally.
I have a problem with my program on a Windows 8.1 Surface Pro tablet. I programmed a button to be 'push-and-hold', but when I touch the tablet nothing happens until I release my finger. This briefly controls the button. When I connect a USB mouse to the tablet, it responds normally; when I press the left mouse button: the button in my program goes down until I release the mouse button. I tried about every setting in the Touch section of the Windows control panel without any succes.
Does anyone have a suggestion?
Any help would be greatly appreciated.
Chris

Previous Post.
http://forums.ni.com/t5/LabVIEW/Press-and-hold-on-a-Surface-pro-touch-screen/m-p/2816346
If you clicked on your username and looked at your profile, you can see the messages you've created or replied to in the past.

Why did my brand new Ipod 5g 32gb touch screen stop working?

So I got this ipod from the Genius Shop for about a month. A few days ago when IOS 7.1 came out, I updated it. However, the ipod seems to lag a little. Today, I was charging my ipod and for some reason, when I turn it on, the touch screen stop working (the ipod is in perfect condition). The home button, volume button and the on/off button all works fine except for the touch screen. I want to restore everything on my computer, but I can't get pass the lock screen (the touch screen seems to stop working). I just can't do anything on this ipod anymore beside turning it on and off. I can't even power it off because the touch screen is no longer touchable. So how can I restore everything, or do something about this ipod to work again. Can I still take this back to the Genius Shop and get another one without additonal charge?

If the reset does not work try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Has anyone used a touch screen monitor with scxi.I am having video lock ups while using LV and MAX

I have a PCI-MIO-16XE-50 daq card (dev1) connected to a scxi-1000 chassis address 0 ID 1, with a scxi-1102,1163,1163,1162 slots 1,2,3,4 respectively.Cable is connected to daq card to 1102 card .Micro touch screen is used on com2. Have tried other serial ports 1,5. Touch screen works fine with windows until LabView and max is installed .Video lockups,Max failures occur.MAX seems to confict with touch screen.

Max is the NI interface for all the drivers. It may be a specific driver that is causing problems, perhaps NI-VISA. I would try installing things one piece at a time. Might want to start by uninstalling everything so that you start with a clean system. First install LabVIEW with no drivers at all. See if the Micro touch screen still works. Then try installing NI-DAQ. Install each of the drivers you need one at a time. If you don't need something, leave it out.

Touch Screen unresponsive after iOS 8 update

My 1 year old 64GB iPhone 5 touch screen started to become unresponsive after iOS 8 update
It's not consistent. Touch screen functionality will seize whilst phone is being used for either answering calls, typing messges, surfing, gaming etc and won't become responsive until it is turned off and on again (via power button). Home button is functioning with no problems.
As the phone is now out of its warranty period I want to verify if it's the OS that's causing this or do I actually have a hardware issue.

I have the same issue. iPhone 5, 1 year-old, not even a scratch.
Sometimes my touch screen works, sometimes not. When it works, it is just for some seconds, then some phantom touches start to happen all over the screen, but specially, when i'm typing, it types z or m, when I try to type something in, and it receives it, it will act as z or m again....
If I switch off my screen and switch on again... sometimes it will work, sometimes it wont... veeery unstable.
I considered downgrading to 7.1.2 but since I heard it is ilegal I decided to wait for a new iOS release.... any suggestions? (already wiped it and the issue continued...)
Is it really not recommended to downgrade it and have my phone funcionalities back?

IPhone 5S touch screen issues

Hi! I have a lot of issues with the touch screen of my iPhone 5S! the touch screen have areas without response! but not always the sames areas!
each picture represent the different areas without response in the touch screen! are not the same in some cases!
I´m writing from Argentina, so we don´t have apple store here to go to replace the cellphone or repair it! I could buy the whole touch screen and replace it by my self, but I don´t know if is only a problem with the touch screen or maybe an issue with the battery or other hardware components!
Sorry for my English! thank you in advance!

Hi there Psycho_ar,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/TS1827
-Griff W.

IPhone 4 touch screen not working

iPhone 4 touch screen not working properly. Sometimes it activates icon itself. After updating to iOS 6.12, it stop working totally.

Good Morning S.GOPINADHAN,
I understand your iPhone screen is black and you are not able to turn it on. The article below will explain what to do when your iPhone is not responsive. I'll also include instructions on how to back up your iPhone when you are able to turn it on.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-us/HT201412
iCloud: Back up your iOS device to iCloud
https://support.apple.com/kb/PH12520?locale=en_US
Regards,
- Judy

HELP: iPhone 6 Keyboard/Touch Screen Not Working

Hello.
I recently acquired to an iPhone 6, which has been working properly for the last two weeks. Today, my keyboard/touch screen stopped working properly. When I am typing in iMessage, or trying to compose an email, enter a URL, or anything else that requires my touch keyboard, my "123" button that switches to numbers, punctuation, and special characters does not open. I updated my software to iOS 8.3., which switched to a new and "improved" emoji keyboard, but I did this after my keyboard had already become unresponsive. If I click on the emjoi keyboard icon to switch over, the "ABC" button to swtich back to QWERTY is unresponsive. This is REALLY frustrating! The phone is two weeks old, and I cannot use to for a huge chunk of functionality.
It's not a dead spot on the touch screen. When I am not trying to access the keyboard, that little bottom left corner works fine to open/use my Phone app.
I really don't want to reset my phone. Any other ideas?
I made a Genius Bar appointment for next Wednesday 4/15, but that seems like an eternity from now.
Please help!

To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the Touch Screen . If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

Touch screen classic

Similar Messages

Maybe you are looking for