Touch Screen doesn't respond

I'm using HP AIO PRO400 with Windows 10 TP up from Windows 8.1
After all, the touch screen seem to be disabled. Someone help me.

Time for an appointment at the Genius Bar of an Apple store. Appears to be a hardware problem.

Similar Messages

  • TS2771 my ipod touch screen doesn't respond  but only if tap what i want and tap it twice again. it like tap and a double tap

    my ipod touch screen doesn't respond  but only if tap what i want and tap it twice again. it like tap and a double tap

    I think you have an Accessibility feature turned on. Triple click the Home button and then try to go to Settings>General>Accessibility and turn all Accessibility features off. To scroll you may have to use three fingers. If proem see:
    iPhone: Configuring accessibility features (including VoiceOver and Zoom)

  • My Iphone 5 touch screen doesn't respond to touch

    Although I can hard reset, my iPhone 5 suddenly stopped responding to touch. Calls come in and texts, but I can't answer or open the phone since the screen doesn't respond to any touch. I am unable to get to AT&T or Apple right now. Any advice would be greatly appreciated! Thank you.

    Put it into recovery mode and set it up as new device:
    iOS: Unable to update or restore
    How to back up your data and set up as a new device

  • IPod Touch Screen Doesn't Respond

    I've Had my ipod touch 3g for about 6 days now. Everything was going well but after i synced my ipod touch, my screen just stop respond. I've tried restoring it many times and its just fail. What should i do? Could i go to the Apple store and get a new one?
    Message was edited by: iKanji

    Hi iKanji,
    Is the screen stuck at a sync prompt? As I've had this happen with my iPhone many times in the past.... It's a strange predicament that you can get into and I don't now the cause...
    At times I try to connect and disconnect my device from the dock connector until the device's OS realizes that one of the jobs are stuck and it reboots that prompt. Then all is fine.
    Again this issue was with my iPhone and it was a lot worse before the 3.1.2 update. It happens very rarely now, and does come back to life once the OS of the device realizes that this is occuring. Until then, the screen and power buttons are totally useless..
    Very frustrating, but this is the only solution I've seen work for me.
    Good luck and let me know if this helps.

  • Portion of screen doesn't respond to touch

    I got my iPod Touch a few months ago and just today I found that about the top inch (almost half) of the screen doesn't respond to touch.
    I can't access 'calendar, notes, etc...', nor can i scroll through my songs from the top half or hit the 'back' button.
    I tried restarting it, but that didn't work. I don't know if I want to try restoring it because I don't have a backup of all my songs on my computer, and I searched on the internet, and the only PC to iPod program compatible with the iPod Touch is $20.
    I purchased the iPod Touch from Amazon.com, so I'm not sure if I will be able to bring it to the Apple Store.
    I am not sure what I should do. :/
    Any help is very much appreciated!

    https://selfsolve.apple.com/GetWarranty.do
    Go to that website. that's where you can check if the ipod is covered under apple's limited year warrenty. Just type in the your Serial Number and the country where you live and it'll will tell you if it's still covered under the warrenty. And if it is, you can go to the apple store and complain about the problem. They might even give you a new one. hope that helped.

  • Touch screen doesn't recognize my touch?

    My iphone started acting funny the other day. It would only recognize my touch occasionally and was very quick and jerky. Now I cannot unlock my phone at all, nor can I turn it off. The touch screen does not recognize my touch at all. The phone will ring and I can receive texts, but I cannot answer or access my telephone at all. I am very frustrated because I have only had the phone for a couple weeks longer than the warranty and the Apple Store wants to charge me $199.00 to have it fixed. It seems a little bit too convenient that right at the end of the warranty the phone stops working. Does anyone know how I can go about fixing this without having to buy a brand new phone? Any help would be appreciated. I love my iPhone, but I am a little disenchanted with it presently. Please help me. Thank you.

    I'm having a similar problem, started yesterday with my 2G iphone
    The touch screen doesn't work in a very specific line horizontally across the screen that only comes into play in certain screens:
    -Calculator, the C, +/-, div, X buttons no longer respond.
    -In contacts, any contact or phone number that happens to fall in that exact place does not respond (very difficult for calling people)
    -In the app store I can't log in or cancel out because the 'ok' and 'cancel' buttons are in the dead zone.
    -When scrolling once my finger hits that spot it stops.
    -In notes I can't click on the third note down. (I'll never know what I wanted to remember on Fed 5th)
    ...on & on & on...
    It is only an issue when the click-able icon is in this 'exact' spot, a little up & a little down & I'm fine.
    on another note: Interesting how some one received a free replacement when music couldn't be purchased from itunes (above post), and someone else was told to buy a new phone when they couldn't power down... not fair.

  • I updated my iPhone 5 yesterday to iOS 8.1.3, now the touch screen isn't responding, keeps opening aps and then get stuck.

    I updated my iPhone 5 yesterday to iOS 8.1.3, now the touch screen isn't responding, keeps opening aps and then get stuck.  Can't hang up after making a call.  Can't close messages.  Have I done something wrong?

    Good day catjono,
    If you are having an issue with your iPhone's touchscreen not responding, I would suggest that you troubleshoot using the steps in this article - 
    If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
    Thanks for using Apple Support Communities.
    Safe computing,
    Brett L 

  • All of a sudden my screen doesn't respond anymore? i-pad 2.

    I turned on my i-pad 2 and now the screen doesn't respond anymore. I got the slider to unlock it, to move once, but that was it? Help?
    Thanx in advance
    Tim

    Did you drop the iPad?
    Yes, a wireless keyboard will work with the iPad, but you'll need the iPad to work so you can set it up.
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My palm m105's touch screen doesn't work properly after a sync.

    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    My palm m105's touch screen doesn't work properly after a sync.
    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    Thanks in advance!
    Post relates to: Palm m105
    Post relates to: Palm m105

        Maldoman578,
    Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • I cant open apps on my iPhone 4 the touch screen doesn't work.  I have restored my phone and still nothing works.

    I can't open apps on my iPhone.  The touch screen doesn't work.  I have restored it already but it still won't work.  What can I do.

    If the touch screen is not having any response then you probably have a hardware failure. Take your phone to an Apple Store or authorised service provider to have it checked.

  • The image came up on my screen saying that I need to connect my iPod to iTunes, but I have a passcode, so it won't allow me to. And I want to try and turn it off, but my touch screen doesn't seem to be working either. HELP!

    The image came up on my screen saying that I need to connect my iPod to iTunes, but I have a passcode, so it won't allow me to. And I want to try and turn it off, but my touch screen doesn't seem to be working either, so I can't even turn it off since you need to "slide to power off." HELP! I'm leaving on Thursday morning for six and a half weeks, and I absolutely need my iPod with me. I was just at the Apple store today for problems I was having with ANOTHER product, and I don't really want to drive all the way out to where my nearest store is (which is not very near) if I can figure this out at home. My iPod was working totally fine earlier today and last night, so I don't know what happened! Please, please, PLEASE HELP!

    Now it's allowing me to reboot (hold down power button and home button and restart), but every time it just comes up to the same thing: the connect to iTunes page. Which is not possible. And I refuse to restore my iPod. PLEASE HELP.

  • My ipod nano touch screen is not responding please help, and i tried to hold down the volume and power button but its still not working

    ipod nano touch screen is not responding to my touch and whenever i click on something it just shows up as a white box

    Have you double check to make sure VoiceOver and other accessibility features have not been turned on?  See this article for more information and assistance.
    iPod nano (6th generation): How to use VoiceOver
    B-rock

  • My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

    My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

    ME TOO.  NOW MY IPHONE 6 PLUS IS SAME LIKE YOU.
    iphone is diabled- connect to iTunes because i forget passcode.
    i cannot connect iTunes because it's always asking to enter passcode on iphone.
    So, i cannot make restore my iphone 6+. And then, I cann't erase "device" in icloud.
    My iphone is new. No icloud. didn't connect to itune backage.
    That's why I try to connect iTunes but it need to enter passcode.
    So, my iphone just keep "iphone is disbled-connect to iTunes".
    IPHONE 6 PLUS

  • The bottom part of my iPod Touch screen isn't responding but I can slide to unlock the screen and slide the icons at the bottom but I just can't click on them, anyway to solve this?

    The bottom part of my iPod Touch screen isn't responding but I can slide to unlock the screen and slide the icons at the bottom but I just can't click on them, anyway to solve this?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              

  • Touch screen doesn't work!!!

    I got my TP two weeks ago, played with it for a day and a half then, in the middle of surfing the web, the touch screen doesn't work. I've contacted HP support and sent my device in for repair. I got it back two days ago (12/30/2011), worked totally fine for 20 mins and the touch screen didn't work again. I've tried using WebOS Doctor 3.0, 3.0.2, 3.0.4 nothing works.
    I've tried rebooting it multiple times, still doesn't work. Frustrating I must say....
    Any suggestions?
    Post relates to: HP TouchPad (WiFi)

    Gotcha, so I just want to make sure I'm following you correctly. At this point the screen is probably all black from the auto-turn-off thing. You hit the power button, and the little yellow lock icon appears on the bottom. But when you try to drag the little lock icon, nothing happens. Does that describe what's happening to you?

Maybe you are looking for

  • How do I unlink an iCloud account from an iTunes one?

    This is like  https://discussions.apple.com/message/25495321  which randers4 answered last month.  My wife & son both have iPhones on the her iTunes & iCloud accounts, which causes all sorts of grief with iMessage & iTunes purchases (apps & music) an

  • Deploying EJB 3.0 entity beans without a Datasource

    [Cross-posted from the TopLink list] My question: Is there any way to configure the container or persistence provider to defer trying to connect to the Datasource until I make some call that involves persistence? Or any other way to deploy an app con

  • Return order with reference to the Billing Document

    Hi All, This is with reference to issue that when I create a Return order with reference to the Billing document I had one line item in the billing document say xxx of quantity  4  I had done the setting in the system messages V4 229 to convert the w

  • Import  com.sap.aii.mappingtool.* show error in PI 7.1 adapter module

    Hi Experts, i have an adapter module for 7.0 and i am trying to replicate the same for PI  7.1  in 7.1 NWDS. i have made the required changes as mentioned in stefan's blog :/people/stefan.grube/blog/2008/12/11/adjust-your-pi-70-adapter-modules-for-pi

  • [Solved] Failing to initialize swap?

    I have been rebooting alot recently when I noticed that on boot up it was failing to initialize swap! I used the command free and it returned that swap had zero space! what is going on? here is my fstab for reference. # /etc/fstab: static file system