Touch screen doesnt response anymore.
So, my phone did get bricked by some extras-devel software, I had to re-flash it (OS and EMMC). Now after flashing touch screen doesnt response anymore. If tried to flash it again (OS and EMMC) without luck, still it doesnt response to anything. Can't get past the settings menu. Is there a way to fix this or do I need to send it to Nokia Care?
hmm. wierd.
so your have a device that is at factory specs now, with absolutely no software on it with exception to the OS, and your touch still does not work?
if it were me, i would crack the phone and make sure that the flex-cable is attached, and if it wasn't, i would connect it and try again. ....
however, if it was connected and didnt work, or you are not comfortable doing that, then i would take it to a nokia service center for repair. IF you are in the USA, then that would mean going online to this site, http://www.nokiausa.com/get-support-and-software/repair-and-recycle/repair/repair-locator and then put your imei in and get a print screen of the warranty information and then finish the rest of the questions online until you get the confirmation page that you mail in with your phone.
if the website doesnt work, as it had problems when i was trying to do it, then call in to their customer service number @ 1-888-665-4228 and they will help you over the phone with the same thing.
if you have to mail it in, be sure you take out your battery, sim card, stylus, battery cover, memory card. (you will not get them back)
Similar Messages
-
My ipods touch screen doesnt work anymore i cant unlock my ipod
my ipod was working fine for a while and then now all of a sudden the touch screen doesnt work at all. Ive restored it twice now and i cant unlock my ipod because the screen doesnt work..anything i can do to fix it or do i have to buy a new one?
If you restored to factory defaults/new iPod and still have the problem you very likely have a hardwre problem and an appointment at the Genius Bar of an Apple store is in order.
-
TS2771 HELP! My ipods touch screen doesnt work anymore!
My ipod screen is not working! I updated to latest version. This started last few years (2011) and I thought it would stop, but it dosent work! Q.Q Help me pls
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
i have a apple iphone 3g and my touch screen doesnt work i tried to back it up to my itunes but its telling me unlock it i need my contacts off it like asap help
If the touch screen physically doesn't work, it's too late to back it up. You should have been syncing your contacts with something... a cloud service or contact manager on a PC. If you were not, then I'm afraid you're going to lose them.
-
Freezing, touch screen doesnt work, call buttons d...
Hi, ever since i updated my phone with that necessary update that kept bugging me my phone has been freezing and the touch screen doesnt work. It usually works fine after a night of charging, but that's just annoying and i shouldnt be doing this if the phone costs so much and ive only had it for half a year.
dont know what phone you have but go software update program (back up) and reinstall the latest software again via pc is better
it works for me in the past -
Touch screen not responsive for droid 2
The touch screen on my phone only works when I slide it open. can't unlock phone without sliding it open. very frustrating
That's very frustrating to have a non responsive touch screen. Have you removed the battery and retested? Did this start after a application was downloaded? Please back up your information on the device thru Google and then master reset the device. Click here for reset instructions. If that doesn't fix the problem please PM me and I will troubleshoot with you further.
Thank you -
Problem: Touch Screen not fully responsive at all times.
I broke one screen trying to answer calls before the ring sequence timed out.
After missing 7 calls over a few hour time span, I tried harder and harder presses on the screen.
Lesson learned - take it back anytime it hiccups. The phone was 5 to 6 weeks old.....
That phone was sent off for out-of-warranty repair.
The replacement (luckily I had a line up for upgrade) has the same problem, but not as severe.
The problem seems to be worse under high humidity weather conditions.
Problem: Repaired Phone now unable to be brought out of standby
The original arrived back from repair.
The screen was replaced, and the LCD was reported to be damaged in shipping, so it was also replaced.
The phone now will not wake from standby, under any circumstances. You have to remove the battery and restart.
I have the screen timeout set for 30 minutes. At least it lets me do some things via WiFi.
I have done a Full Reset, format SD Card and format Phone Storage.
I have also done a complete firmware reload.
Anyone have any ideas?Yuy can try the standard fixes to rule out a software problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restor to factory defaults/new iPod.
If you still have the problem that points to a problem like bad digitizer. Apple will exchange your iPod for $99, $149 or $199 depending upn the capacity.
A third-party place may be less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replae the screen yourself
iPod Touch Repair – iFixit -
Ipod touch screen not responsive.
I locked my 3rd gen Ipod touch by pressing the power button. Now the screen turns on but there is no response to touch screen. Won't unlock. Any help is appreciated.
- Try reseting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next restore the iPod from backup via iTunes
- Last, restore to factory default/new iPod -
Touch screen doesnt work at all, Please Help
I have a HP Pavilion touch smart 20 all in one PC. I have had my computer for a few months and everything was working. I really never used the touchscreen but I tried it out and it worked fine. Just recently I tried using the touchscreen and it doesn't work at all no response to touch. My wireless mouse and keypad work fine still. PLEASE HELP. I am running 64 windows 8
To get your touchscreen to function normally, you can try out the following options:
(Note: Follow these options in the same order as they are given)
1. Clean the screen
Follow these steps:
a) Turn Off your computer
b) Take a soft, damp cloth and spray some good-quality glass cleaner on it.
(Important: Do not spray the glass cleaner directly onto your touchscreen)
c) Wipe the screen gently to remove smudges and dirt that may be present on your screen.
d) Once done, turn On your computer and see if the touch screen responds now. If it does not, follow the steps ahead.
2. Perform a complete shutdown (if you have not done this already)-
Follow these steps:
a) Press Windows +1 key
b) Click "Power", then press and hold Shift key and click "Shut Down"
c) Turn On the computer by pressing the power button
d) Check if the touch screen responds. If it does not, refer to the next section below.
3. Configure your touch display settings
Follow these steps:
a) In your Windows Start screen, type "Tablet PC Settings" (without quotes) to open Search.
b) From the results that appear, select "Tablet PC Settings"
c) On the display box that pops up, click on "Setup…"
d) Follow the on-screen instructions. By following this process, you are notifying your system to identify your screen as a touch screen.
e) Now tap your screen to see if it responds. If it doesn't, go to the next point below.
4. Perform a System Restore
A System Restore will enable you to roll-back recent changes in your system and take it back to a stage when it was working perfectly. To know how to restore your system, refer to the following HP Support link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03327545&lc=en&cc=us&dlc=en
If this does not resolve your issue, go to the next step.
5. Perform a HP Recovery Manager
To use HP Recovery Manager on your computer, refer to the following link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03489643&lc=en&cc=us&dlc=en#N206
6. If the issue still persists, you need to contact HP Support on the following link:
http://www8.hp.com/us/en/support.html -
Touch screen non responsive, can't answer calls.
when my phone goes into sleep mode with non activity, I receive a call but cannot answer it because touch screen won't respond, no button is responsive, I have to reboot the phone. What is this issue?
Chiefterry,
That's got to be quite annoying! Is this a brand new issue or one that has been going on for a while? Did any specific event - such as a new app installation, software update, or physical/liquid damage - prompt this issue to start?
SarahO_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
Touch acts as if the "touch " SCREEN DOESNT WORK
TOUCHING THE SCREEN DOESNT NOT WORK
Try to set it up as new device without using the backup afterwards:
How to back up your data and set up as a new device
If this does not work, you'll have to get it serviced:
Apple - Support - Service Answer Center -
Touch screen doesnt work on hp pavillion touchsmart 14
The problem: The touchscreen on my touchsmart 14 sleekbook doesnt work.
A couple weeks ago I had this weird problem where the clicker/mouse/arrow thing kept going up to the righthand corner of the screen and I couldnt get the mouse back down even though the scroll pad was working.
I kept having to restart my computer to make it work
Now the touchscreen doesnt work at all and I dont know how to fix it, and yes my computer has been turned off an turned on since then many times
Thank you
Also I did all of this
Press the Windows logo key + X.
Select Device Manager from the list.
Click the little arrow next to Human Interface Devices to expand the list and update the driver.
Click the touch screen driver
Right-click, and select Enable from the list.
Click Yes on the dialog box that asks if you are sure you want to enable the touch screen driver.
I had to disable and re-enable and it doesnt workGood Morning @HSolomon ,
Welcome to the HP Forums!
It is a wonderful place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are experiencing a difficulty with your touchscreen. Here is a link to Troubleshooting touch screen issues in Windows 8 that will assist you through some steps.
Have you tried Using automated troubleshooting (Windows 8) to overcome this difficulty.
Have you ran the HP Support Assistant to aid with HP updates and help resolve issues?
You may also consider contacting HP support for assistance. They can remotely access your system to help overcome difficulties.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Can no longer install drivers and touch screen not working anymore
I have the HP 520-1130ea all in one PC. Its a touchscreen. I have Windows 7 home premiun 64 bit operating system.
it has been working fine for the last two years and on Friday 11th april, i connected my android tablet (samsung Galaxy tab 7.0) to my pc and it could not install the drivers so my PC could not see the tablet. Last week this worked ok. I attach my tablet to my pc using a USB cable and transfer files by usb transfer. I dont use any software at all.
I have tried to reinstall the drivers for the android tablet and i get the error code that the drivers were found but they cant be installed. Access denied.
I have also tried to restore my pc to the last time everything worked ok which was just a week before the problem started, but the restore has failed on 4 occassions.
I have now deleted all updates on my PC from last week and i think I have deleted something or failed to allow something to isntall (a box popped up when i restarted the computer after the update delete which I ignored)
No my touch screen no longer works.
I plugged in an external hard drive to back up my computer and I also could not install the drivers for that too. this just happened today.
My printer is connected to my PC and that still works ok.
I have been battling with this for 4 days now and ploughed the internet for solutions and no hope in sight!
I have also tried:
1. installing optional updates. no luck there. also some of the updates failed
2. giving myself full control on the system 32 folder in windows.
I am the administrator on the PC.
HELP PLS!!!Hi compnewbie,
Welcome to the HP Forums!
Thank you very much for your thorough post and detailed steps! I see that you are not being able to install drivers, and I would be happy to assist you!
The first suggestion I will make is to boot your computer in Safe Mode. To do this, please follow this document on Windows 7 Safe Mode. No extra software will be loaded, which will make this driver issue easier to troubleshoot. In Safe Mode, try to connect your external drive.
If you still cannot connect your external drive (or any other USB device), I recommend following this resource on Testing for Hardware Failures (Windows 7). This should help diagnose any potential hardware problems with the computer.
If you are not able to detect any hardware problems on your computer, please follow this document on Restore files from a backup.
Please re-post with the results of your troubleshooting, and I will diligently follow up with you!
Best regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Ipod nano 7th generation touch screen doesnt work
Ipod nano 7th gen touch screen wont respond only 6weeks old?
Have you reset it? Hold down the power and home buttons, wait for the Apple logo, let go of the buttons.
-
My x3 02 touch screen doesnt work!
I bought my nokia x3 02 about 3 days ago and last nihgt the touch screen becaem unresponsive, my phone went dead and then when i turned it back on the touch screen wouldnt work so i couldnt press ok to get into my phone when i put in my pin code! i dont know what to do i dont have a spare phone! help! please
Remove the battery for a few minutes, switch on again and see if it works.
If not contact the retailer that sold it you or your nearest nokia care point for a repair or replacement.
http://europe.nokia.com/support/repair-and-recycle/repair/care-points
Maybe you are looking for
-
Creating a static library with XCode cross-project references.
I have a project and am trying to move a lot of the code into a static shared library, and added a cross project reference to this library in my app. However, when I moved a file from my app to the library (removing the reference in my app and moving
-
Windows XP and authorizing multiple users on same computer
What is the best way to share songs and authorize multiple users (unique XP users on the same computer)? Are all users on XP considered to be on unique authorized computerers? Thank you.
-
My itunes on windows 8 doesnt seem to recognise any of my apple devices(ipad, iphone 5).
My itunes on widows 8 doesnt recognise devices. I have reinstalled itunes and yet the same problem occurs. Please can you help!!
-
Maintain the telephone and fax number of vendor in Purchase order document
Dear Expert, Hi, i'm wondering here.. why when I create purchase order , and enter the vendor in vendor field, the telephone and fax field in PO header - address tab is not automatically appears, only the street/ house number , postal code and so for
-
Received this error notice 'There was an unexpected error with the request on subscribed calendars (error -1). " when I was trying to get US Holidays added to my calendar. Same thing happen when I tried to download a new file for my MacBook Pro with