Touch screen dosn't work need help

my touch screen no longer works i don't have original computer and when i try to sinc to itunes it wants the code wich i have but can't enter i wouldn't be upset to lose all stuff on it now but still need to sync any ideas????

If the screen does not respond to the taps on the targets then the digitizer is probably defective. You will need to get the device repaired. If it is still under warranty (90 days from purchase date), contact Palm for a replacement. Click on the link below for the Palm support page for the repair options.
http://www.palm.com/us/support/contact/us_warranty_a.html
Post relates to: Palm i705

Similar Messages

  • Dropped my phone and now I see almost-transparent lines on my lock screen and the touch screen doesn't work. Help?

    I was walking to my garage when my iPhone slipped out of my hand and fell on the floor. I looked at it and saw strange almost-transparent lines on my lock screen. I tried to unlock my phone, but it wouldn’t let me do anything. It was almost as the touch screen wasn’t working. I turned it off and plugged in my phone to the charger and it started up automatically, but it still looked the same and wouldn’t work. I think that my iPhone 5 might be broken? Please help!

    Make an appointment at an Apple store and have then assess it

  • I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides screen is ok. Is there a way around it? :(

    I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides the screen is completely fine-the screen will not recognize my finger anymore. I am not trying to fix the phone, but I need to have my contacts. The pictures have already synced, but I need my password to do a full backup. Unfortunately, I can't type in my password. Is there any way around it? If I take my phone to the apple store, will they be able to help me? I am not willing to replace the screen just to do this, however, so that is out of the question. 

    Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
    Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
    ~Lyssa

  • I recently lost and tracked down my iPhone (4s) w/find my iPhone. It was awesome! When I recovered it, my touch screen didn't work at all! What's going on? I'm very frustrated! Please help:(

    I recently lost and tracked down my iPhone (4s) w/find my iPhone. It was awesome! When I recovered it, my touch screen didn't work at all! What's going on? I'm very frustrated! Please help:(

    imanfromsweden wrote:
    Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
    Please help....
    On belhalf of my fellow volunteers, the answer is, "We'll try our best." 
    My advice is to try not to treat this like it is a paid service provided by compensated professionals.  Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

  • Iphone 5 touch screen has stoped working all of a sudden, help?

    iphone 5 touch screen has stoped working all of a sudden, help?

    Hello there, shankate1993.
    The following Knowledge Base article offers up some great steps for troubleshooting issues with touchscreen response on your iOS device:
    If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
    Fix your touchscreen
    Make sure your hands are clean and dry, then try these steps:
    If you have a case or screen protector on your device, try removing it.
    Clean the screen with a soft, slightly damp, lint-free cloth.
    Unplug your device.
    Restart your device. If you can't restart, reset your device.
    If your touchscreen still doesn't respond like it should, contact Apple Support or take your device to an Apple Retail Store or Apple Authorized Service Provider.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I have bought  three iPhone 6  one for me and one each for my two kids  we have just done the update iOS 8.01 now all phone  do not connect to service provider and touch id is not working ,  APPLE HELP !!!!

    i phones  updated iso 8.01 all three phones  will not connect to service provider and touch id
    will not work  APPLE HELP !!!!!!!!!
    anyone know  i fix as  i have spent over 2000 pound on three phones that won't work
    all three where working fine until the 8.01 update

    Apple just pulled the update because it is a major fubar! You will have to rollback your iPhone to the base iOS 8 using iTunes and Apple needs to seriously test its patches!
    Update:
    Simply connect your phone to iTunes and back up your data. Then, click the “Restore iPhone” button and follow the on-screen instructions. It’s a huge pain, but at least it’s better than having your shiny new iPhone turned into a big expensive iPod touch.

  • HT201406 my ipad touch screen is not working please give solution for it.

    my ipad touch screen is not working please give solution for it.
    i have connected ipad to itunes and done it restore seetings then also my touch is not working but
    when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i do

    If you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
    Regards.

  • My ipod touch screen is not working or responding at all, what can i do?

    I need help,
    my ipod touch screen is not working or responding! the buttons work but thee buttons do. i trieed reseting it and shut it down, nothing works
    HELP
    Erika

    Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Built in microphone and touch screen doesn't work

    Hi
    I have problems with two things, my built in microphone doesn't record anything, also I tried all suggested steps of HP support.
    Windows recognizes the microphone.
    The touch screen doesn't work the touch part, but the display is working good.
    Also i tried to update Drivers, but looks like Windows does not recognized the touch screen, when I going to Control Panel and search for touch screen stuff, I do not see anything.
    I hope you can help me to fix this.
    Thank you.

    Hi @ldiego008 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY TouchSmart m7 Notebook and the microphone and the Touchscreen not working correctly. If you follow this document it will show you how to correct this issue on the Touchscreen.
    Try following  this document document on Resolving Microphone and Line-in issues for Windows 8.1.
    Here is something else that might help if you need it. If you go to the Device Manager (Audio inputs and outputs)and uninstall it from there restart the computer it should automatically reinstall it for you. This link shows you the Device Manager Screen shots that might help.
    Hope this helps with both issues.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • HT1414 touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod

    touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod, can anyone help or what is the cause

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • My palm m105's touch screen doesn't work properly after a sync.

    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    My palm m105's touch screen doesn't work properly after a sync.
    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    Thanks in advance!
    Post relates to: Palm m105
    Post relates to: Palm m105

        Maldoman578,
    Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • I have an ipod touch 3rd generation and the whole touch screen is not working.

    I have a 32gb ipod which I bought for fifty dollars and when i bought it had a pretty baddly cracked screen but thing is it worked fine. Every part of the screen worked fine; it was as senstive where the screen was cracked as the areas of the screen that were not cracked. I dropped it a couple times from like two or three feet on two a hard wood floor about four times all it did was make the cracks on the screen a little worse. Then one day I dropped it from about a foot and now the whole touch screen is not working does anyone know why this is. They told me at the ipod store to get a new one would be 130 to trade mine in. But the thing is I very mechanically inclined and I am very good with electrionics; I was planing on buying the glass for fifty bucks and putting it on myself because I read how to do it and I am more then capapble of doing it. But now since the touch screen is now working; do I need a new screen along with a new glass? See the thing is because I think both those part cost 120 together. Which would not be worth me doing that when I can go to the ipod store and they would trade me a new one for 130 bucks. But the issue is, they told me at the ipod store they would have to look and see how damaged the ipod is to see if they will exchange it. My screen is severly cracked; also I have a dent that is a half inch long and 1/8th inch deep in the back of my ipod and its very scracthed up; do you thing an ipod store would exchange it in the condition it is in. Also has anybody had this problem before and I was wondering if it would be possible for me to take it apart and fix it my self without buying any new parts.

    If I were you, I would pay the $130 for a replacement. Then you can be sure that it has all the working parts it needs.

  • My 5800 touch screen is not working properly.

    Hi,
    Frequently my 5800 touch screen is not working. Some times I am unable to use the screen. It's just hung. The call, menu and disconnect buttons only work during this time. Can any please let me know what might be the problem.?
    Thanks in advance,
    Tarun Konduri. 

    Tarun_Konduri wrote:
    Hi,
    Frequently my 5800 touch screen is not working. Some times I am unable to use the screen. It's just hung. The call, menu and disconnect buttons only work during this time. Can any please let me know what might be the problem.?
    Thanks in advance,
    Tarun Konduri. 
    Tarun_Konduri wrote:
    Hi,
    Frequently my 5800 touch screen is not working. Some times I am unable to use the screen. It's just hung. The call, menu and disconnect buttons only work during this time. Can any please let me know what might be the problem.?
    Thanks in advance,
    Tarun Konduri. 
    Dear all,
    I had the same issue with my nokia 5800, finally I found very interesting thing, I have been doing everything to bring my phone back to original  condition where simply I can touch and access the phone.
    Actually the issue was with the thin plastic piece which was put on the touch screen for its protection. I was struggling to touch and access the phone but i coudnt for almost 2 weeks, it was directing me to bottom left corner touch buttons of the phone and automatically opens and activate functional which I didn't want.
    Solution was, I simply removed the thin plastic layer from the phone , Now it works fine.
    Hope this will help.

  • Touch screen doesn't work after Vista Home64-bit upgrade to Windows 7 64-bit Home Premium on IQ506

    Hello, right before I upgraded to Win7, I made sure that the Touchsmart software worked and that the touch screen itself worked. As soon as I performed the upgrade (not the clean upgrade that wipes all your existing data, but rather the upgrade that carries over your applications and files), the touch screen ceased to work. 
    I didn't panic, thinking that I probably had to run some windows/hp updates, which I did to no avail. I also manually updated ALL the driver/software files found at this link http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=4063&lc=en&dlc=en&cc=us〈=en&product=3752245
    Yup, every single one. As a last resort, I tried some of the HP troubleshooting for touch screens not working. It said to shut down the computer, pull the plug on the computer, hold the power button for 5 seconds, plug the computer back in, and boot it up again. Didn't help at all.
    I'm at the end of my rope and there is no additional HP support on this. I'm waiting for a reliable driver update for win7 for this **bleep** touch screen. I'm dead in the water -- I've got a touchscreen computer whose touchscreen doesn't work! Someone else out there must be having this problem! Any leads?

    Did you try installing the Touch Driver?
    http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=4063&lc=en&dlc=en&cc=us&product=3752245&lang=en
    Driver
    Date
    Version
    Previous
    Size
    »  NextWindow Multi-Touch Device Driver Update
    11-2009
    1.3.0.2
    2.83M

  • I have iPhone 5 and the touch screen doesn't work

    I have iphone 5 and the touch screen doesn't work,i want to restart it but my touch screen is not working. I read lots of reviews and support from online all in vain. Please help me fix the problem.
    <Re-Titled By Host>

    Do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the device to boot back up.
    No data is loss doing a reset.

Maybe you are looking for

  • Lightroom 2.5 very slow

    After upgrade to 2.5, LR seems very sluggish. Below is the data from Help/System Info. Any suggestions? I'm not sure why Virtual Memory Used is so high. Is this a setting I need to change somewhere? Thanks for any suggestions. Lightroom version: 2.5

  • Using SD Card or ExpressCard for Scratch Disk?

    On my old laptop, I know that the patch for Photoshop CS3 allowed using scratch disks on removable media. But on my new computer, I've updated all the software and cannot get these drives to show in the list of scratch disks. The expresscard and SD r

  • How do I disable the drop down box which appears below the Search Box (which shows previous searches) when I start typing in my search topic

    Hi I would like to know how to disable the drop down box which appears below the search box on the start page when I start to type in my search topic. If for example the first letter I type in is an S then it shows a list of previous searches of site

  • Status Profile Issue

    Dear all, I have a doubt in status profile setting that, if i have 5 approal levels at SO level. 1 is created, 2.Need modifications, 3.asst manger app, 4..manager, 5.Final approved. In this at level 1 we can make changes in SO. but SO is updted to le

  • Error Occured while replicating to ECC

    Hi There I have created a RETURN Order in CRM 4.0. As per the process this order should get replicated to ECC. But i got the following error in CRM : "An error has occurred in the system ECC while copying the document." Now this order which is create