Touch screen failure

I bought my Xperia z3 in December in Orlando but I live in Brazil. And when I came back I detected a failure on a lane of my touch screen. I already contacted the Brazilian technical support but they can do nothing because the warranty is not international. And if I send to the American technical support they can not send it back to Brazil. So did I lose my money? I can not believe it. Does anyone have an idea?

Sorry to hear that, but the warranty only apply in the country the phone was purchased, also you could ask if you could pre-pay the shipping cost to send it back to Brazil.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

Touch Screen Failures

Apparently, the touchscreens on the iPhones are starting to fail for a lot of people. Mine failed yesterday (the bottom 1/4 stopped responding) so I took it into an Apple store and they said they'd replace it in 1 to 5 days. At my store, they said they're starting to get a bunch in that are failing and when I searched on the 'net I see a lot of reports but couldn't find any official acknowledgement by Apple as to the issue.
Does anybody hear have anything definitive about touchscreen failures and how Apple plans to address them moving forward?

Max is the NI interface for all the drivers. It may be a specific driver that is causing problems, perhaps NI-VISA. I would try installing things one piece at a time. Might want to start by uninstalling everything so that you start with a clean system. First install LabVIEW with no drivers at all. See if the Micro touch screen still works. Then try installing NI-DAQ. Install each of the drivers you need one at a time. If you don't need something, leave it out.

Has anyone used a touch screen monitor with scxi.I am having video lock ups while using LV and MAX

I have a PCI-MIO-16XE-50 daq card (dev1) connected to a scxi-1000 chassis address 0 ID 1, with a scxi-1102,1163,1163,1162 slots 1,2,3,4 respectively.Cable is connected to daq card to 1102 card .Micro touch screen is used on com2. Have tried other serial ports 1,5. Touch screen works fine with windows until LabView and max is installed .Video lockups,Max failures occur.MAX seems to confict with touch screen.

Max is the NI interface for all the drivers. It may be a specific driver that is causing problems, perhaps NI-VISA. I would try installing things one piece at a time. Might want to start by uninstalling everything so that you start with a clean system. First install LabVIEW with no drivers at all. See if the Micro touch screen still works. Then try installing NI-DAQ. Install each of the drivers you need one at a time. If you don't need something, leave it out.

IPod Touch 1G "touch-screen freeze" after Wi-Fi connect (since 1.1.4) + log

Hi everybody,
I have a big problem with the touch-screen since approximately 2 months.
The problem is:
1. I turn on my iPod Touch 1G (Firmware 3.0), works
2. I activate my Wi-Fi (it connects, wi-fi bar is visible), works
Then the real problem starts (mainly while and after using Safari, sometimes even without using it)
After a few seconds the iPod freezes.
The strange thing is, only the touch-screen itself seems to be "deactivated"
If I leave the iPod calm for some minutes I am able to "unlock" it again.
All in all it seems, that the iPod deactivates the touch-screen after being connected to the Internet, because if I turn off the Wi-Fi connection, everything works fine.
This problem appeared since firmware 2.0 (1.1.3 worked fine i think) and now I have 3.0 and it is still the same problem.
Already downgraded, upgraded, jailbreaked, un-jailbreaked it. I tried everything.
Another solution to come to my Home-Screen is to Lock/Unlock a few times, sometimes this works.
I renewed the firmware more than once (10-15 times) and still do not ger rid of this problem. (Also in "recovery" mode)
Same thing with Youtube:
1. Starting Youtube
2. (If I am able to search a video) selecting a video
3. Video plays, but no touch-pad reaction anymore
I am not able to work with it anymore.
And I am sure it is a software problem, due to the fact the touch-screen reacts(!).
_A "forced restart" (Home + Lock Button hold for a few seconds) does not help, problem is still the same._
Thanks to everyone who has an idea.
I am happy about every kind of information which could help to solve this problem.
Greetings
Eimer
P.S. If you need some more information about the iPod e.g. do not hesitate to ask.
Here is my Log (out of the newest "iPhone Utility Program")
==== Attached at 2009-06-22 21:41:04 +0200 ====
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: dress 00:1d:4f:1f:0f:e3
Mon Jun 22 21:21:35 unknown com.apple.launchd[1] <Notice>: * launchd[1] has started up. *
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x::setMulticastMode(): WiFi not powered on (0x5)
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x::setMulticastList(): WiFi not powered on (0x5)
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AirPort: Link Down on en0
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: Command line options and current values used by driver
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: marvel-debug=0x88
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: marvell-feature-flags=0x3f
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: mrvl.ps.unicast_timeout=100
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: mrvl.ps.multicast_timeout=10
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: mrvl.ps.entrance_timeout=15
Mon Jun 22 21:21:40 unknown com.apple.launchd[1] <Warning>: (com.apple.BTServer) open("/var/logs/BTServer/stdout", ...): No such file or directory
Mon Jun 22 21:21:40 unknown com.apple.launchd[1] <Warning>: (com.apple.BTServer) open("/var/logs/BTServer/stderr", ...): No such file or directory
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: marvell-powersave-listenint=1
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: marvell-retry-limit=15
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: marvell-sdio-pulldowns=-1
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: WTE=0x0
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x::setPowerStateGated(): 0 -> 1, 0xc0cd5000
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: Loading Main Program
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: Firmware loaded.
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: [FTL:WRN] Failure running _LoadFTLCxt!
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: [FTL:WRN] Recovering NAND Data Structures - this will take some time!
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x Hardware Details:
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: Firmware Version: 9.108.4.p12 (0x0c096c04)
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: I/O Version: 0x0002
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: Hardware Version: 0x0012
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: Mac Address: 00:1d:4f:1f:0f:e3
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: [FTL:WRN] _FTLRestore OK!
Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: [FTL:MSG] FTL_Open [OK]
Mon Jun 22 21:21:41 unknown kernel[0] <Debug>: Got boot device = IOService:/AppleARMPE/arm-io@3C000000/AppleS5L8900XIO/flash-controller0@A00000/ AppleS5L8900XADMFMC/disk@FF/AppleNANDFTL/IOFlashBlockDevice/IOBlockStorageDriver /unknown vendor unknown product Media/IOFDiskPartitionScheme/Untitled 1@1
Mon Jun 22 21:21:41 unknown kernel[0] <Debug>: BSD root: disk0s1, major 14, minor 1
Mon Jun 22 21:21:41 unknown kernel[0] <Debug>: L2TP domain init
Mon Jun 22 21:21:41 unknown kernel[0] <Debug>: L2TP domain init complete
Mon Jun 22 21:21:41 unknown kernel[0] <Debug>: PPTP domain init
Mon Jun 22 21:21:41 unknown kernel[0] <Debug>: Jettisoning kext bootstrap segment.
Mon Jun 22 21:21:41 unknown mDNSResponder[16] <Error>: mDNSResponder mDNSResponder-191.9 (May 13 2009 22:49:14) starting
Mon Jun 22 21:21:41 unknown kernel[0] <Debug>: mDNSResponder[16] syscallbuiltinprofile: mDNSResponder (seatbelt)
Mon Jun 22 21:21:41 unknown /usr/sbin/fairplayd[19] <Notice>: Vroum\n
Mon Jun 22 21:21:41 unknown kernel[0] <Debug>: mDNSResponder[16] Builtin profile: mDNSResponder (seatbelt)
Mon Jun 22 21:21:42 unknown /usr/bin/IQAgent[18] <Notice>: Unsupported. Exiting.
Mon Jun 22 21:21:42 unknown mDNSResponder[16] <Error>: Note: SetDomainSecrets: no keychain support
Mon Jun 22 21:21:42 unknown com.apple.BTServer[28] <Notice>: BTServer 1.2 () Modified on
Mon Jun 22 21:21:42 unknown com.apple.BTServer[28] <Notice>: com.apple.server.bluetooth: Bluetooth Super Server Robot Destroyer
Mon Jun 22 21:21:42 unknown kernel[0] <Debug>: systemShutdown false
Mon Jun 22 21:21:42 unknown /usr/libexec/CrashHousekeeping[26] <Error>: Failed to connect to lockdown. Attempt 1 of 10\n
Mon Jun 22 21:21:43 unknown com.apple.accessoryd[22] <Notice>: BTSessionAttach failed : 0x9
Mon Jun 22 21:21:43 unknown com.apple.BTServer[28] <Notice>: com.apple.server.bluetooth: Unable to match bluetooth service in device tree.
Mon Jun 22 21:21:43 unknown com.apple.BTServer[28] <Notice>: com.apple.server.bluetooth: Not a valid MAC address (all 00s).
Mon Jun 22 21:21:43 unknown com.apple.BTServer[28] <Notice>: com.apple.server.bluetooth: No bluetooth on this device.
Mon Jun 22 21:21:43 unknown lockdownd[14] <Error>: (0x39d802b8) lookupimei: Could not get matching service for baseband
Mon Jun 22 21:21:43 unknown lockdownd[14] <Error>: (0x39d802b8) load_bluetoothaddress: Could not look up bluetooth MAC address via IOKit
Mon Jun 22 21:21:43 unknown mDNSResponder[16] <Error>: HW_MODEL: Device (Device) Portability 99 Marginal Power 99 Total Power 99
Mon Jun 22 21:21:43 unknown mDNSResponder[16] <Error>: D2DInitialize!!!
Mon Jun 22 21:21:43 unknown mDNSResponder[16] <Error>: CFRunLoop member is active
Mon Jun 22 21:21:43 unknown com.apple.mDNSResponder[16] <Notice>: Call to BTSessionAttachWithRunLoopAsync failed with error 9 - critical error
Mon Jun 22 21:21:43 unknown /usr/libexec/CrashHousekeeping[26] <Error>: Failed to connect to lockdown. Attempt 2 of 10\n
Mon Jun 22 21:21:44 unknown mediaserverd[15] <Error>: Failed to connect to lockdown. Attempt 1 of 10\n
Mon Jun 22 21:21:44 unknown configd[20] <Notice>: skipped com.apple.SystemConfiguration.PowerManagement (excluded)
Mon Jun 22 21:21:44 unknown /usr/libexec/CrashHousekeeping[26] <Error>: Failed to connect to lockdown. Attempt 3 of 10\n
Mon Jun 22 21:21:45 unknown mediaserverd[15] <Error>: Failed to connect to lockdown. Attempt 2 of 10\n
Mon Jun 22 21:21:45 unknown configd[20] <Notice>: CLTM: No thermal sensors detected, not registering for notifications
Mon Jun 22 21:21:45 unknown /usr/libexec/CrashHousekeeping[26] <Error>: Failed to connect to lockdown. Attempt 4 of 10\n
Mon Jun 22 21:21:46 unknown mediaserverd[15] <Error>: Failed to connect to lockdown. Attempt 3 of 10\n
Mon Jun 22 21:21:46 unknown lockdownd[14] <Error>: (0x39d802b8) synthesizedeviceID: Faking out the wifi address for UDID synthesis
Mon Jun 22 21:21:46 unknown /usr/libexec/CrashHousekeeping[26] <Error>: Failed to connect to lockdown. Attempt 5 of 10\n
Mon Jun 22 21:21:47 unknown mediaserverd[15] <Error>: Failed to connect to lockdown. Attempt 4 of 10\n
Mon Jun 22 21:21:47 unknown configd[20] <Error>: WiFi: Unable to attach to Mobile Bluetooth result=0x1
Mon Jun 22 21:21:47 unknown configd[20] <Error>: Failed to connect to lockdown. Attempt 1 of 10\n
Mon Jun 22 21:21:47 unknown /usr/libexec/CrashHousekeeping[26] <Error>: Failed to connect to lockdown. Attempt 6 of 10\n
Mon Jun 22 21:21:48 unknown mediaserverd[15] <Error>: Failed to connect to lockdown. Attempt 5 of 10\n
Mon Jun 22 21:21:48 unknown lockdownd[14] <Error>: (0x810a00) calculateapplicationusage: Could not lookup the previous mobile application usage
Mon Jun 22 21:21:48 unknown profileInstallationHelper[31] <Warning>: loading file /var/mobile/Library/Carrier Bundle.bundle/profile.mobileconfig inspection: 0
Mon Jun 22 21:21:48 unknown profileInstallationHelper[31] <Warning>: -[MCPayloadManager setupWithPayloadFile:forInspection:] 2118 : could not set up from file /var/mobile/Library/Carrier Bundle.bundle/profile.mobileconfig
Mon Jun 22 21:21:49 unknown profileInstallationHelper[31] <Warning>: /SourceCache/ManagedConfiguration/ManagedConfiguration-302.2/MCPayloadManager.m 2119 : Error Domain=MCPayloadHandlerErrorDomain Code=1 UserInfo=0x111ca0 "Profile could not be validated" {\n Class = MCPayloadManager;\n MCErrorType = MCFatalError;\n Method = "setupWithPayloadFile:forInspection:";\n NSLocalizedDescription = "Profile could not be validated";\n NSLocalizedRecoveryOptions = (\n OK\n );\n NSLocalizedRecoverySuggestion = "Profile could not be read.";\n}
Mon Jun 22 21:21:50 unknown kernel[0] <Debug>: AirPort: Enabled AppleMRVL868x (link 1, sys 0, user 1)
Mon Jun 22 21:21:50 unknown kernel[0] <Debug>: AppleMRVL868x::setPOWER() [configd]: 1
Mon Jun 22 21:21:50 unknown configd[20] <Notice>: network configuration changed.
Mon Jun 22 21:21:50 unknown configd[20] <Notice>: setting hostname to "a"
Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) load_systemversion: Could not lookup release type
Mon Jun 22 21:21:51 unknown lockbot[35] <Error>: copy_preference: Could not lookup key SBFormattedPhoneNumber
Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) lockbotcopypreference: lockbot returned an error: MissingPreferenceValue
Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) loadactivationrecords: looking at /var/root/Library/Lockdown/activation_records (1/0)
Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) loadactivationrecords: looking at /var/root/Library/Lockdown/activationrecords/podrecord.plist (8/0)
Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) extract_recordidentifier: Could not extract ICCID from account token
Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) loadactivationrecords: Could not extract ICCID from record
Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) loadactivationrecords: This is the iPod activation record
Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) loadactivationrecords: looking at /var/root/Library/Lockdown/activation_records (6/0)
Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) determineactivationstate: The original activation state is Activated
Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) determineactivationstate: SIM status: kCTSIMSupportSIMStatusReady
Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) determineactivationstate: The activation state has not changed.
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice - Configuration: PTP
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: PTP
Mon Jun 22 21:21:52 unknown SpringBoard[23] <Warning>: -[SBTetherController _demoCardConnection] No AppleTetheredDevice instance found
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice - Configuration: iPod USB Interface
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: USBAudioControl
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: USBAudioStreaming
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: IapOverUsbHid
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: AppleUSBMux
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: IOAccessoryPortUSB::start
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: virtual bool AppleUSBDeviceMux::start(IOService*) build: May 13 2009 22:35:22
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: init_waste
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction all functions registered- we are ready to start usb stack
Mon Jun 22 21:21:52 unknown SpringBoard[23] <Error>: WiFi: Consulting "no-sdio-devices" property.
Mon Jun 22 21:21:52 unknown SpringBoard[23] <Error>: WiFi: "no-sdio-devices" property not found.
Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Mon Jun 22 21:21:53 unknown /usr/libexec/ptpd[12] <Notice>: PTP interface bas been activated at high speed.
Mon Jun 22 21:21:53 unknown SpringBoard[23] <Warning>: lockdown says the device is: [Activated], state is 3
Mon Jun 22 21:21:56 unknown mcmobiletunnel[46] <Warning>: received request 4: (\n RequestType\n), keys {\n RequestType = GetProfileList;\n}
Mon Jun 22 21:21:56 unknown mcmobiletunnel[46] <Warning>: processing request 4: ((\n RequestType\n))
Mon Jun 22 21:21:56 unknown mcmobiletunnel[46] <Warning>: sending reply {\n OrderedIdentifiers = (\n );\n ProfileManifest = {\n };\n ProfileMetadata = {\n };\n Status = Acknowledged;\n}
Mon Jun 22 21:21:56 unknown mcmobiletunnel[46] <Error>: receive_message: Could not receive size of message: 0 Operation not permitted
Mon Jun 22 21:21:56 unknown mcmobiletunnel[46] <Warning>: received request 4: (null), keys (null)
Mon Jun 22 21:21:56 unknown mcmobiletunnel[46] <Error>: main: Could not receive request from host.
Mon Jun 22 21:21:57 unknown SpringBoard[23] <Error>: WiFi: Consulting "no-sdio-devices" property.
Mon Jun 22 21:21:57 unknown SpringBoard[23] <Error>: WiFi: "no-sdio-devices" property not found.
Mon Jun 22 21:21:57 unknown lockbot[47] <Error>: copy_preference: Could not lookup key SBFormattedPhoneNumber
Mon Jun 22 21:21:57 unknown lockdownd[14] <Error>: (0x39d802b8) lockbotcopypreference: lockbot returned an error: MissingPreferenceValue
Mon Jun 22 21:21:57 unknown /System/Library/CoreServices/SpringBoard.app/SpringBoard[23] <Notice>: CLTM: initial thermal level is 0
Mon Jun 22 21:22:00 unknown kernel[0] <Debug>: AppleMRVL868x::setASSOCIATE() [configd]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPEWPA2PSK, key = CIPHER_PMK, flags = 0x2
Mon Jun 22 21:22:00 unknown kernel[0] <Debug>: AppleMRVL868x Joined AP: @ 0xc4f8e000, BSSID = 00:1a:2a:d3:45:8a, rssi = -41, rate = 54 (100%), channel = 9, encryption = 0xc, ap = 1, hidden = 0, directed = 0, failures = 0, age = 2, ssid[12] = "Arcor-D34512"
Mon Jun 22 21:22:00 unknown SpringBoard[23] <Warning>: WiFi: Joined network Arcor-D34512. WiFi bars visible: 0
Mon Jun 22 21:22:00 unknown kernel[0] <Debug>: AirPort: Link Up on en0
Mon Jun 22 21:22:03 unknown kernel[0] <Debug>: AppleMRVL868x::setCIPHER_KEY() [kernel_task]: type = CIPHERAESCCM, index = 0, flags = 0x4
Mon Jun 22 21:22:03 unknown kernel[0] <Debug>: AppleMRVL868x::setCIPHER_KEY() [kernel_task]: type = CIPHER_TKIP, index = 2, flags = 0x0
Mon Jun 22 21:22:03 unknown configd[20] <Notice>: network configuration changed.
Mon Jun 22 21:22:04 unknown configd[20] <Notice>: CaptiveNetworkSupport:CaptiveStartDetect:1813 skipping probe on IPv4.Router=192.168.2.1;IPv4.RouterHardwareAddress=00:1a:2a:d3:45:8a, protected network
Mon Jun 22 21:22:09 unknown kernel[0] <Debug>: AppleMultitouchZ2SPI: * Killing device (#1): Too many errors performing control write *
Mon Jun 22 21:22:09 unknown kernel[0] <Debug>: AppleMultitouchZ2SPI: kIOReturnNotResponding: 5 times
Mon Jun 22 21:22:16 unknown kernel[0] <Debug>: AppleMultitouchZ2SPI: * Killing device (#2): Too many errors performing control write *
Mon Jun 22 21:22:16 unknown kernel[0] <Debug>: AppleMultitouchZ2SPI: kIOReturnError: 5 times
Mon Jun 22 21:40:10 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Mon Jun 22 21:40:10 unknown /usr/libexec/notification_proxy[40] <Error>: Could not receive size of message
Mon Jun 22 21:40:10 unknown kernel[0] <Debug>: virtual IOReturn AppleUSBDeviceMux::message(UInt32, IOService*, void*) - kMessageInterfaceWasDeActivated
Mon Jun 22 21:40:10 unknown /usr/libexec/ptpd[12] <Notice>: PTP interface has been deactivated.
Mon Jun 22 21:40:10 unknown kernel[0] <Debug>: AppleUSBDeviceMux::reportStats: USB mux statistics:
Mon Jun 22 21:40:10 unknown kernel[0] <Debug>: USB mux: 64 reads / 0 errors, 134 writes / 0 errors
Mon Jun 22 21:40:10 unknown kernel[0] <Debug>: USB mux: 0 short packets, 0 dups
Mon Jun 22 21:40:10 unknown /usr/libexec/notification_proxy[40] <Error>: Could not receive message
Mon Jun 22 21:40:10 unknown /usr/libexec/ptpd[12] <Notice>: PTP interface bas been activated at high speed.
Mon Jun 22 21:40:42 unknown SpringBoard[23] <Warning>: SB SYNC: iTunesSyncRequestedStart 0
Mon Jun 22 21:40:42 unknown SpringBoard[23] <Warning>: SB SYNC: beginSyncing 1
Mon Jun 22 21:40:42 unknown SpringBoard[23] <Warning>: SB SYNC: didShowSyncPanel 2
Mon Jun 22 21:40:42 unknown SpringBoard[23] <Warning>: SB SYNC: _notifyAppsSyncWillBegin 2
Mon Jun 22 21:40:53 unknown BackupAgent[64] <Warning>: Backup session starting
Mon Jun 22 21:40:55 unknown mcmobiletunnel[72] <Warning>: received request 4: (\n RequestType\n), keys {\n RequestType = GetProfileList;\n}
Mon Jun 22 21:40:55 unknown mcmobiletunnel[72] <Warning>: processing request 4: ((\n RequestType\n))
Mon Jun 22 21:40:56 unknown mcmobiletunnel[72] <Warning>: sending reply {\n OrderedIdentifiers = (\n );\n ProfileManifest = {\n };\n ProfileMetadata = {\n };\n Status = Acknowledged;\n}
Mon Jun 22 21:40:56 unknown mcmobiletunnel[72] <Error>: receive_message: Could not receive size of message: 0 Operation not permitted
Mon Jun 22 21:40:56 unknown mcmobiletunnel[72] <Warning>: received request 4: (null), keys (null)
Mon Jun 22 21:40:56 unknown mcmobiletunnel[72] <Error>: main: Could not receive request from host.
Mon Jun 22 21:40:56 unknown SpringBoard[23] <Warning>: SB SYNC: iTunesSyncHasCompleted 2
Mon Jun 22 21:40:56 unknown SpringBoard[23] <Warning>: SB SYNC: didEndSyncing 5
Mon Jun 22 21:40:56 unknown SpringBoard[23] <Warning>: ITDBPrepServerPostProcessRun: [BEGIN] looking up itdbprepserver.
Mon Jun 22 21:40:57 unknown itdbprepserver[75] <Warning>: starting up.
Mon Jun 22 21:40:57 unknown itdbprepserver[75] <Warning>: acquired iTunes sync file lock.
Mon Jun 22 21:40:57 unknown itdbprepserver[75] <Warning>: acquired itdbprep file lock.
Mon Jun 22 21:40:57 unknown itdbprepserver[75] <Warning>: posting com.apple.itdbprep.notification.willBegin
Mon Jun 22 21:40:57 unknown SpringBoard[23] <Warning>: ITDBPrepServerPostProcessRun: [-END-] looking up itdbprepserver. success = 1
Mon Jun 22 21:40:57 unknown itdbprepserver[75] <Warning>: BEGIN processing command: com.apple.itdprep.command.runPostProcess
Mon Jun 22 21:40:58 unknown itdbprepserver[75] <Warning>: [BEGIN] Post Processing...
Mon Jun 22 21:40:58 unknown itdbprepserver[75] <Warning>: Skipping iTunes Commands.
Mon Jun 22 21:40:58 unknown itdbprepserver[75] <Warning>: Running Misc Commands...
Mon Jun 22 21:40:58 unknown itdbprepserver[75] <Warning>: Running Sorting Process...
Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: received request 4: (\n RequestType,\n IPCUIdentifier\n), keys {\n IPCUIdentifier = "iPCUHost-0C04DA13-AF9B-4EE6-A3F2-29FB774CB4CD";\n RequestType = GetEncryptionKey;\n}
Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: processing request 4: ((\n RequestType,\n IPCUIdentifier\n))
Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: returning persistent reference table {\n "iPCUHost-0C04DA13-AF9B-4EE6-A3F2-29FB774CB4CD" = <69646e74 00000000 00000003>;\n "iPCUHost-0C04DA13-AF9B-4EE6-A3F2-29FB774CB4CD-HostCert" = <63657274 00000000 00000002>;\n}
Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: Got persistent ref <69646e74 00000000 00000003> for label iPCUHost-0C04DA13-AF9B-4EE6-A3F2-29FB774CB4CD
Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: keychain lookup returned error 0
Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: got identity/cert <NSCFType: 0x1075a0>
Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: got certificate 1075a0
Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: sending reply {\n PublicKey = <308202a9 30820191 a0030201 02020102 300b0609 2a864886 f70d0101 05304531 36303406 03550403 0c2d6950 4355486f 73742d30 43303444 4131332d 41463942 2d344545 362d4133 46322d32 39464237 37344342 34434431 0b300906 03550406 13024445 301e170d 30393036 32323138 33343130 5a170d31 30303632 32313833 3431305a 30453136 30340603 5504030c 2d695043 55486f73 742d3043 30344441 31332d41 4639422d 34454536 2d413346 322d3239 46423737 34434234 4344310b 30090603 55040613 02444530 819f300d 06092a86 4886f70d 01010105 0003818d 00308189 02818100 93de5ae1 ae02f4de a05bd272 89a395c0 baa91919 eef5ed42 44cd27db 956aaa06 a2654847 5d2440e3 147664be b4826c88 bfce82f7 4c6b7113 1f60077b a622c32d 4222529c 7b7b42f6 c54d61b4 926ceb12 44ce630b e9a946db fd4aebab 2fc850b1 7acd9e8e 545a5aee 6c850a7f 4f9ed65f 735d6bb9 f883c1fb 878f38c7 3575ad1f 02030100 01a32a30 28300e06 03551d0f 0101ff04 04030205 a0301606 03551d25 0101ff04 0c300a06 082b0601 05050703 04300d06 092a8648 86f70d01 01050500 03820101 00f04d60 d47cc9af 65409ac3 1e828445 55495579 132ec75e 5961a95f acc55b89 65e7dce4 d6d1461f 3454d60b a5e78559 aa157ea7 88a705f5 bcf8ffe2 94156084 ba9f7682 422a6c81 b675c9eb 4fa54ef1 549c97f2 41c93b28 e8f6d60d ea4aadda 0414345a de790a41 ce83c38b 61b3e845 08817544 ccbd75ef bbc3942d 6378710b a78dd371 52031bf7 340685c2 f3bfcaaa 51f69bce 97f20b93 05364a0b fd5e0f45 0ee340c4 b5f217c6 c5be43f6 1d041fb2 76013985 6ad1de11 3d226ac4 4a21340f a6a22aaf b1878a9a e205d915 c0cc10ff 111e0372 7abd91c6 e51126fc c8204cf3 87f1e871 832b7ee8 c786a4d5 1bd81ee5 80acc5cf 11840dad 95f38d04 7d690cde 56>;\n Status = Acknowledged;\n}
Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Error>: receive_message: Could not receive size of message: 0 No such file or directory
Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: received request 4: (null), keys (null)
Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Error>: main: Could not receive request from host.
Mon Jun 22 21:41:07 unknown itdbprepserver[75] <Warning>: Running Create Triggers...
Mon Jun 22 21:41:07 unknown itdbprepserver[75] <Warning>: [-END-] Post Processing.\n\nStats\n\ttotalTime=9.26s\n\tcommands=0.02\n\tmisc=0.08s\n\ticuSo rt=9.16s (MLSicudata=0.56s, MLSicu_secdata=0.26, dropIdx=1.21, normalize=0.15, update_orders=4.53, tStatsICUOther1=0.01, createIndex=2.43)\n\n
Mon Jun 22 21:41:07 unknown itdbprepserver[75] <Warning>: * STARTING: DB Backup (CREATE-NEW) *
Mon Jun 22 21:41:08 unknown itdbprepserver[75] <Warning>: * FINISHED: DB Backup (CREATE-NEW, time = 0.86s) *
Mon Jun 22 21:41:08 unknown itdbprepserver[75] <Warning>: Initializing MusicLibrary
Mon Jun 22 21:41:10 unknown itdbprepserver[75] <Warning>: DONE processing command: com.apple.itdprep.command.runPostProcess
Mon Jun 22 21:41:10 unknown itdbprepserver[75] <Warning>: posting com.apple.itdbprep.notification.didEnd
Mon Jun 22 21:41:10 unknown itdbprepserver[75] <Warning>: Releasing locks.
Mon Jun 22 21:41:10 unknown itdbprepserver[75] <Warning>: exiting now.
Message was edited by: Eimer

Has someone an idea how to get into the system of the iPod, that i am able to see what he is doing?
I already tried to works with XCode, but not able to connect to my device.
Also worked with the iPhone Utility, nevertheless a bit helpful.
Or a hint, how to destroy my actual firmware and to set up a new one, means setting up a completely (brand) new iPod like i bought it at the store?!
Support can not help me any more because my warranty is over ince 2 days.
Thank you

I cant open apps on my iPhone 4 the touch screen doesn't work. I have restored my phone and still nothing works.

I can't open apps on my iPhone. The touch screen doesn't work. I have restored it already but it still won't work. What can I do.

If the touch screen is not having any response then you probably have a hardware failure. Take your phone to an Apple Store or authorised service provider to have it checked.

Can no longer install drivers and touch screen not working anymore

I have the HP 520-1130ea all in one PC. Its a touchscreen. I have Windows 7 home premiun 64 bit operating system.
it has been working fine for the last two years and on Friday 11th april, i connected my android tablet (samsung Galaxy tab 7.0) to my pc and it could not install the drivers so my PC could not see the tablet. Last week this worked ok. I attach my tablet to my pc using a USB cable and transfer files by usb transfer. I dont use any software at all.
I have tried to reinstall the drivers for the android tablet and i get the error code that the drivers were found but they cant be installed. Access denied.
I have also tried to restore my pc to the last time everything worked ok which was just a week before the problem started, but the restore has failed on 4 occassions.
I have now deleted all updates on my PC from last week and i think I have deleted something or failed to allow something to isntall (a box popped up when i restarted the computer after the update delete which I ignored)
No my touch screen no longer works.
I plugged in an external hard drive to back up my computer and I also could not install the drivers for that too. this just happened today.
My printer is connected to my PC and that still works ok.
I have been battling with this for 4 days now and ploughed the internet for solutions and no hope in sight!
I have also tried:
1. installing optional updates. no luck there. also some of the updates failed
2. giving myself full control on the system 32 folder in windows.
I am the administrator on the PC.
HELP PLS!!!

Hi compnewbie,
Welcome to the HP Forums!
Thank you very much for your thorough post and detailed steps! I see that you are not being able to install drivers, and I would be happy to assist you!
The first suggestion I will make is to boot your computer in Safe Mode. To do this, please follow this document on Windows 7 Safe Mode. No extra software will be loaded, which will make this driver issue easier to troubleshoot. In Safe Mode, try to connect your external drive.
If you still cannot connect your external drive (or any other USB device), I recommend following this resource on Testing for Hardware Failures (Windows 7). This should help diagnose any potential hardware problems with the computer.
If you are not able to detect any hardware problems on your computer, please follow this document on Restore files from a backup.
Please re-post with the results of your troubleshooting, and I will diligently follow up with you!
Best regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

3rd gen iPod Touch touch screen doesn't work after I updated to iOS 5.1?

I updated to iOS 5.1, and now my touch screen doesnt work at all. All of the buttons work, and it responds, but nothing else works. I would restore it but it's locked with a passcode and I can't unlock it without the touchscreen.....I have no idea whether this is a failure is 5.1, or if it's something I did.

Try a hard reset first to see if that does any good. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
If no luck with that, you'll need to manually connect your iPod to your iTUnes library in recovery mode using the instructions in the Apple support document below. Doing so will allow you to bypass the passcode and restore the iPod.
iOS: Unable to update or restore
B-rock

IPad touch screen does not respond even after full restore and update

I have an iPad 2 64 GB
It has for a number of months intermittently stopped responding to any touch screen inputs. This issue began almost as soon as I opened the iPad for the first time. As it was happening very rarely and normally responded eventually, so I thought nothing of it.
This week the iPad will not respond to any touch input at all (Home, On/Off, Volume and Mute buttons still respond). I have tried the hard reset process a number of times and still nothing.
I backed up the device to my machine and applied the latest update 5.1.1 and still no response. I then did a factory reset and still nothing.
I have never dropped or damaged my iPad in any way.
Does anybody know of any ongoing issues with the touch screen or a solution to this problem?

Thank you.
I've already booked myself in to the Genius Bar this week.
I suspect it is a hardware failure and more specifically a loose internal connection.

Touch Screen defective - NO Support!!

I have had an iphone for just over a year and this is my third one. Apple replaced the first two for a crack on the back case, advising it to be a flaw in the case. Now I have a touch screen issue, but I would not call it a dead spot like Apple states. Apple also said it was a hardware issue. The issue is that the screen work with some apps but not on the home screen or the keypad. When I stated having this issue I looked up and saw that this is more common then Apple let on. I was happy with the iphone till this happened and I was told to just buy a new iphone. I am extremely dissatisfied with the support and customer service Apple has displayed on what clearly is a defect. Toyota has taking care of their customers. I would like to here from others in my situation. I am sure that Apple will remove this post so I may be starting a new Facebook group for this topic.

If no change after restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup, more than likely there is a hardware problem. With a hardware failure, it can be a partial or complete failure.
If this were a problem specifically with Apple software on the iPhone only, then the overwhelming majority of iPhone users or all iPhone users running the same firmware version would be experiencing the same, which is not the case.
Your iPhone has a hardware problem as already stated by Apple and you have been provided the options for getting it fixed - via a 3rd party repair service, or making use of Apple's out of warranty or not covered under the warranty "repair" price, which pays for an exchange for the same model at a discounted price. If this isn't acceptable, use the money to purchase another phone instead.
Message was edited by: Allan Sampson

Touch Screen Calibration

My touch screen is acting like it needs to be recalibrated. Sometimes I touch the screen and something an inch away activates. When I try to type in my password random letters fill - ones I don't hit. Sometimes it ignores my touch completely. I tried a reset but it did't help. Any ideas?

Then it's a hardware failure as the touch screens on iOS devices can not be calibrated. Best chance to fix it is apple or a third party repair center.

Lumia 920 device touch screen is locked.

A call is being charged while the phone is running and has Lumia920. but it was not to react to the touch during charging. Although you need to work very well Unfortunately, the touch screen does not respond.
in this instance youtube i did search. I watched a video of two distressed eventually.
http://www.youtube.com/watch?v=g5xY4H26NR0
http://www.youtube.com/watch?v=jUqH7No88mg
As shown in videos What is the cause of the problem origination.
phone used in such a short period of time 4 months This problem is composed of What do you need to solve.
FAILURE exactly what hardware due.
Soft Reset and Hard Reset was performed also.
I customize certainly did not respond to the reset options.
Can you help to solve your trouble..
I used to be sent to my device to download and watch sad.
If I find out if the cause of trouble would be most grateful..
Thanks.

please help me,.

My iphone touch screen is not working

my iphone touch screen is not working i have restarted it how can i back up to the computer without allowing it through my phone?

If your iPhone screen is broken or damaged so that it is not possible to enter anything, then you will not be able to unlock it if you have set a passcode and you will not be able to communicate with it in any way.
At this point you need to take it to an Apple store genius bar and have the technicians check it out and see what can be done. If you are in the US, some Apple stores here are now able to replace the screen on an iPhone 5-series device. Otherwise they do an out-of-warranty replacement for $269 if the failure is due to damage.

Touch Screen and need tip

I was wondering if there was a model similar to Satellite M505-S4990-T but with 15'' monitor.
With 4 GB Ram, Built-in microphone, Long lasting battery, Windows 7 and with touch screen feature.
Can anyone tell me if the touch screen feature works ok? I've heard it has had failures with Vista, however, with Windows 7 it's suppose to work fine.
What's your opinion on this?

In general TouchScreen support in WIndows 7 is vastly improved over Vista. I have no idea about on that specific system though as I haven't used it. And I have no idea if there is a model that meets your specs.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Part of the touch screen seems to be dead

Hello All,
Having a problem with the touch screen. It works just fine, except that the lower left corner isn't reacting to touch. When in the desktop screen, the left half of the task bar will not react to touch. the right half is fine along with the area right above it.
This makes using the desktop very difficult to say the least. I have tried to calabrate it multiple times. When the crosshairs are in all four positions of the lower left corner, it will not pickup your touches. The driver is the most current available, and no problems using a mouse.
Any help would be appreciated if there is a fix. I hate the thought of having to ship the unit back to HP for repair unless absolutely necessary. It is under warranty, but looking for a possible fix.
Thank you all so much for the help! I look forward to hearing from the "Real Experts".
-Kevin

Hi
- Have you tried doing the touchscreen test from F2- UEFI
Testing for Hardware Failures (Windows 8)
-before that make sure that you updated the HPSA
- and then try doing F2 test
- hope this would fix the isue
- if u find any dead pixel in the F2 test
- its a Hardware issue were a repair is required
Please click "Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the bottom right to say "Thanks" for helping!
I am an HP employee

White IPod Touch Screen

My Ipod Touch Screen has suddenly turned white and keep flicking different colours.
I've tried the 10 second restore but it still doesn't work what should I do

Try doing this, force shut down iPod by holding down the "sleep" button and the "home" button until the screen turns off. Press the on button. If that doesn't work, then do another force shut down then plug your iPod into the computer while holding the "home" button until you see a picture showing a USB cord going into a iTunes logo. iTunes will display a pop up saying your iPod is in recovery mode and you have to restore it before it can be used. Restore it, but beware that all data will be erased. Hope you have a recent backup. If you fail to enter recovery mode, or the restore fails, enter DFU mode. Google how to enter DFU mode, if that dosn't work after the restore, ur iPod might have a graphical chip failure or something and it will have to be serviced

Touch screen failure

Similar Messages

Maybe you are looking for