Touch Screen Glich

Is anyone else having a problem with their touch screen after making a phone call. After I end any phone call my touch screen is unresponsive the app I try to touch acknowledges the touch but will not open and this goes even for contacts but if I lock the screen and unlock eureka its now responsive. Some times it even does it in call, say I call apple support and need to press 1 for sales 1 lights up but never tones. I took my phone into the local Apple store and they replaced it but the new phone has the same problem.
Thanks in advance for advice.

I have had the same problem. It is intermittent, I will be on a call and then the screen is unresponsive. I can't use the keypad to end the call, or to put the call on mute. I find that it happens if I have left the phone idle for a while. Has anyone else had this problem or have suggestions? Many thanks to the community.

Similar Messages

Problem push and hold on a Surface Pro tablet's touch screen

Hi,
I tried posting this before, but I can't find my origional post so I hope I'm not spamming accidentally.
I have a problem with my program on a Windows 8.1 Surface Pro tablet. I programmed a button to be 'push-and-hold', but when I touch the tablet nothing happens until I release my finger. This briefly controls the button. When I connect a USB mouse to the tablet, it responds normally; when I press the left mouse button: the button in my program goes down until I release the mouse button. I tried about every setting in the Touch section of the Windows control panel without any succes.
Does anyone have a suggestion?
Any help would be greatly appreciated.
Chris

Previous Post.
http://forums.ni.com/t5/LabVIEW/Press-and-hold-on-a-Surface-pro-touch-screen/m-p/2816346
If you clicked on your username and looked at your profile, you can see the messages you've created or replied to in the past.

Why did my brand new Ipod 5g 32gb touch screen stop working?

So I got this ipod from the Genius Shop for about a month. A few days ago when IOS 7.1 came out, I updated it. However, the ipod seems to lag a little. Today, I was charging my ipod and for some reason, when I turn it on, the touch screen stop working (the ipod is in perfect condition). The home button, volume button and the on/off button all works fine except for the touch screen. I want to restore everything on my computer, but I can't get pass the lock screen (the touch screen seems to stop working). I just can't do anything on this ipod anymore beside turning it on and off. I can't even power it off because the touch screen is no longer touchable. So how can I restore everything, or do something about this ipod to work again. Can I still take this back to the Genius Shop and get another one without additonal charge?

If the reset does not work try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Has anyone used a touch screen monitor with scxi.I am having video lock ups while using LV and MAX

I have a PCI-MIO-16XE-50 daq card (dev1) connected to a scxi-1000 chassis address 0 ID 1, with a scxi-1102,1163,1163,1162 slots 1,2,3,4 respectively.Cable is connected to daq card to 1102 card .Micro touch screen is used on com2. Have tried other serial ports 1,5. Touch screen works fine with windows until LabView and max is installed .Video lockups,Max failures occur.MAX seems to confict with touch screen.

Max is the NI interface for all the drivers. It may be a specific driver that is causing problems, perhaps NI-VISA. I would try installing things one piece at a time. Might want to start by uninstalling everything so that you start with a clean system. First install LabVIEW with no drivers at all. See if the Micro touch screen still works. Then try installing NI-DAQ. Install each of the drivers you need one at a time. If you don't need something, leave it out.

Touch Screen unresponsive after iOS 8 update

My 1 year old 64GB iPhone 5 touch screen started to become unresponsive after iOS 8 update
It's not consistent. Touch screen functionality will seize whilst phone is being used for either answering calls, typing messges, surfing, gaming etc and won't become responsive until it is turned off and on again (via power button). Home button is functioning with no problems.
As the phone is now out of its warranty period I want to verify if it's the OS that's causing this or do I actually have a hardware issue.

I have the same issue. iPhone 5, 1 year-old, not even a scratch.
Sometimes my touch screen works, sometimes not. When it works, it is just for some seconds, then some phantom touches start to happen all over the screen, but specially, when i'm typing, it types z or m, when I try to type something in, and it receives it, it will act as z or m again....
If I switch off my screen and switch on again... sometimes it will work, sometimes it wont... veeery unstable.
I considered downgrading to 7.1.2 but since I heard it is ilegal I decided to wait for a new iOS release.... any suggestions? (already wiped it and the issue continued...)
Is it really not recommended to downgrade it and have my phone funcionalities back?

IPhone 5S touch screen issues

Hi! I have a lot of issues with the touch screen of my iPhone 5S! the touch screen have areas without response! but not always the sames areas!
each picture represent the different areas without response in the touch screen! are not the same in some cases!
I´m writing from Argentina, so we don´t have apple store here to go to replace the cellphone or repair it! I could buy the whole touch screen and replace it by my self, but I don´t know if is only a problem with the touch screen or maybe an issue with the battery or other hardware components!
Sorry for my English! thank you in advance!

Hi there Psycho_ar,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/TS1827
-Griff W.

IPhone 4 touch screen not working

iPhone 4 touch screen not working properly. Sometimes it activates icon itself. After updating to iOS 6.12, it stop working totally.

Good Morning S.GOPINADHAN,
I understand your iPhone screen is black and you are not able to turn it on. The article below will explain what to do when your iPhone is not responsive. I'll also include instructions on how to back up your iPhone when you are able to turn it on.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-us/HT201412
iCloud: Back up your iOS device to iCloud
https://support.apple.com/kb/PH12520?locale=en_US
Regards,
- Judy

HELP: iPhone 6 Keyboard/Touch Screen Not Working

Hello.
I recently acquired to an iPhone 6, which has been working properly for the last two weeks. Today, my keyboard/touch screen stopped working properly. When I am typing in iMessage, or trying to compose an email, enter a URL, or anything else that requires my touch keyboard, my "123" button that switches to numbers, punctuation, and special characters does not open. I updated my software to iOS 8.3., which switched to a new and "improved" emoji keyboard, but I did this after my keyboard had already become unresponsive. If I click on the emjoi keyboard icon to switch over, the "ABC" button to swtich back to QWERTY is unresponsive. This is REALLY frustrating! The phone is two weeks old, and I cannot use to for a huge chunk of functionality.
It's not a dead spot on the touch screen. When I am not trying to access the keyboard, that little bottom left corner works fine to open/use my Phone app.
I really don't want to reset my phone. Any other ideas?
I made a Genius Bar appointment for next Wednesday 4/15, but that seems like an eternity from now.
Please help!

To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the Touch Screen . If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

HP Spectre 13 touch screen malfunction

The touchscreen on my Ultrabook malfunctions in a seemingly random fashion.
It appears to randomly and independently trigger the touchscreen in a clearly visible vertical line about two thirds of the way across the screen.
The screen reacts as if it has been touched with a finger - but it has not.
Because these 'ghost' touches are so rapid, it completely trashes whatever I am trying to do at the time as the cursor moves to these random locations and it triggers the opening of mutliple additional webpages, changes to font sizes and screen resolution and prevents me from useing the mouse to try and close down webpages etc. The touchscreen malfunction is visible in all applications.
The only way to stop it is to press the power button until the laptop switches off.
I am not aware of a definite trigger, although at times I may have been trying to click on something with the mouse in the area where this 'flaw' appears to be located.
When I first got the laptop I thought it was some really grim virus and spent ages running and re-running scans,until I made the connection with the touch screen.
Then I wondered if it was something to do with particles or dust and spent ages cleaning the screen - but it happens when there is no visible contamination on the screen at all.
Has anyone else experience this?

Hi @Abby501
Welcome to the HP Support Forums!
I understand that you are having some trouble with your touchscreen. I am happy to assist.
It is hard to know, as yet, what the actual problem is: sensitivity, drivers, hardware, other software, etc. Please post the full product number. See the following, if you need help in finding that.
How Do I Find My Model Number or Product Number?
For now, you can see if you can try to adjust the touchscreen settings and see if it helps:
Press the Windows key which brings up the Start Screen
type "touch screen"
Click Settings
Select "Calibrate the screen for pen or touch input"
Select and configure as desired
Let me know if that helped.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

How do I turn off the tiny Shuffle-sized iPod Nano (v6 with a touch screen) when not using its iOS?

Hello and happy new year.
I decided to use this used iPod Nano (touch screen) as an eight/8 GB flash disk/storage (FAT32). I can access the files just fine. I can always restore it back to use iOS quickly and easily if needed.
However, it never seems to turn off/sleep. I tried holding down the big button on top right (next to the two volume controls [+ and -]), but it never does anything. Also, it says "OK to disconnect." when disconnected.
So, I restored its iOS v1.2 from an old 15" MacBook Pro (2008; Mac OS X 10.5.8) onto it and can turn off easily. However, I cannot access its drive since it is not a MS FS and Windows XP Pro. SP3 asked me to format. How can I turn it off and still use it as an 8 GB USB flash disk/drive without installing and using iTunes?
Thank you in advance.

Hey,
Holding in the play/pause and the menu (select) button will force the iPod into disk mode. This is the stand by mode you are talking about.
To turn your iPod off properly you will want to hold down the play/pause button until the screen goes blank and then turn the hold switch on. This is cause the iPod to go to the Apple screen when it turns back on.
Hope this helps,
Ms D.

Yoga 2 Pro Touch screen not working

I've had no problems with my yoga 2 pro for over a month, but last night I decided to do windows updates. This is the model with the i7, and 8gb of ram. I let it update and then restarted it. After it started up, I tried to swipe the cover screen up, but nothing was happening. I then decided to use the mouse, and soon realized that the touch screen was unresponsive. I've tried to restore the computer to before the updates, but it hasn't fixed the problem. I can still switch to tablet and stand mode, etc. and the screen will rotate, but I can not get the touch screen to respond to anything. I tried to install some drivers, but none of them are for the touch screen as far as I know, and nothing else seems to work. Does anyone know a fix, or maybe know of a driver I need to install?

Hey mgollery,
Sorry that you are having this issue. Do you know what might have caused this at least? Did you plug in any USB devices recently or does the touchscreen disable after you plug it in? Did you install any programs recently? Do you have the most updated drivers? Do you leave it on long enough for it to go into sleep mode?
Btw, you should check out this other thread here:
http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-touchscreen-not-working/td-p/902131/...
Some people got it working by uninstalling recently installed software, updating video card drivers, and others have just had to get it replaced.
If none of the uninstalls, updates, drivers stuff works, I would do the following (like the others have said in this list), but please be careful (stuff might break):
- Do a system restore (to a point where it worked before)
- If that doesn't work, do a windows refresh
- If that doesn't work, I'd call Lenovo and see what tech support can do to help. They will try to update stuff for you and if that doesn't work, they will literally try to reset your computer basically to factory settings (Lenovo actually has their own program that tries to reset stuff)
- If that doesn't work, and you can't live without a touchscreen, I'd call up Lenovo or if you are still on the phone with them, get them to replace it. They handle all the shipping and while it sucks to not have it for a couple of weeks, you at least get the computer you paid for.
Ultimately, what happened to me was that none of the little tricks worked. System restore didn't work. Windows refresh didn't work. Then I called them and they basically told me to do the same things. This time though, during the refresh, some bug happened where it screwed up the refresh so I couldn't even start Windows anymore and it bricked my computer. Then they even had me go through the Lenovo refresh thingy which didn't work. At the end, I ended up shipping it back to them to fix and I think they basically just gave me a new Yoga 2 Pro. The whole process sucked, but at least now my touchscreen works and I never plug my fitbit into the USB port anymore.
Hope that helps.

Omni 10 touch screen does not work / Tablet Omni 10 non funziona il touch screen

After updates to Windows, the tablet does not recognize the touch screen.
I tried all the recommendations of the forum but to no avail !! it is impossible that HP does not have a solution to the problem? I see that others have similar problems, so it is a manufacturing defect? Amazon also because I would replace the product with another Omni 10 but if this has the same problem, I take the money and make change. thanks
Dopo gli aggiornamenti a Windows, il tablet non riconosce il touch screen.
Ho provato tutti i consigli dei forum ma senza esito!! è impossibile che HP non abbia una soluzione al problema? Ho visto che altri hanno problemi simili, quindi è un difetto di fabbricazione? Anche perchè Amazon mi sostituirebbe il prodotto con un altro Omni 10 ma se anche questo ha lo stesso problema, prendo i soldi e cambio marca. Grazie

Hey @MaxAlex72 ,
Welcome to the HP Forums!
I understand you're experiencing issues with the touch screen on your Omni 10 tablet.
I would suggest following these guides:
Windows 8 System Restore Guide
Troubleshooting Touch Screen Issues in Windows 8
If neither of those options help it would be best to contact HP Phone Support for service options. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

HT1414 touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod

touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod, can anyone help or what is the cause

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Touch screen not working after system update

A few months ago, my laptop (Satelitte P55t-A5202) went through an automatic system update. Ever since then, my touch screen won't work. I followed the directions to reinstall the HDI programs several times. The first time it worked but only for a few hours. The next time I tried to reinstall, it worked for a second. Now reinstalls do nothing.
Before the system update, my touchscreen worked fine. And in reading the forums, this seems to be a common problem with the updates. I called TOSHIBA customer service for help. The FIRST thing they want to do is charge me for tech support because my laptop is out of warranty. I told the customer service rep repeatedly that my touch screen worked fine until the update. He refused to give me any help because I did not want to pay for him to tell me how to resolve...
In my opinion, this is a toshiba issue not mine so regardless if my laptop is out of warranty, Toshiba should take ownership and be accountable for the problems they cause.
Does anyone have any suggestions as to how to take care of this?
By the way, Toshiba customer service representative was rude, you could barely understand him because of his accent, I had to repeat SEVERAL times what my issue was because he couldn't get past the warranty issue and I had to ask several times to speak with a supervisor ( to which he told me a supervisor would call me instead)

See my reply in the laptop forum.
-Jerry

Touch screen does not work

I just got an HP elitebook 2760p.   Everything works...except that I cannot seem to get the touchscreen to work.   Whether the screen is up (like a regular laptop), or flipped down (like a tablet), it does not respond to fingers or to the pen that comes with the computer. I have tried using the touch screen while using internet explorer, while using the "desktop" of windows 7, and also while booting up the computer with it flipped like a tablet.
There is probably a very simple answer...and once I get it, I'll feel like a beef mind, but for the life of me I can't figure it out.   I can't seem to find any swich to turn on, whether physical or in the windows setting pages. The computer did not come with a manual, but I looked up on the online manual and there is no information on "how to use the touch screen"
Is there something that I must "turn on" in Windows 7, or a switch somewhere on the side of the computer which I need to flip to use the touch screen?   Could I be missing a driver?

Your EliteBook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forum
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Touch Screen Glich

Similar Messages

Maybe you are looking for