Touch screen in not working even after Hard Reset

My Palm Treo 750 stopped working and responding suddenly........i tried a soft rest which didn't worked i then tried hard reset but in both cases the device boots and screen pops up "Tap the Screen to Start The Device". However this is the point where my device hangs up even after resetting it several times. I have also downloaded reset software from the palm website but unfortunately it only runs/works from palm device. i have installed microsoft active sync from the palm CD and my device is detected and syncronized using USB cable which prbably shows it doesnot have a hardware issue.
Post relates to: Treo 750 (AT&T)

Remove any screen protecters or cases, then hard reset again. If the problem continues then it will need to be repaired or replaced.
Post relates to: None

Similar Messages

Iphone 4 front camera not working even after reboot,resets and restore.

i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center

I cannot get my ipod to unlock, the touch screen does not work and I cant reset it

I cannot get my ipod to unlock, the touch screen will not work and everytime i try to reset it I take a picture. any suggestions

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

IPad touch screen does not respond even after full restore and update

I have an iPad 2 64 GB
It has for a number of months intermittently stopped responding to any touch screen inputs. This issue began almost as soon as I opened the iPad for the first time. As it was happening very rarely and normally responded eventually, so I thought nothing of it.
This week the iPad will not respond to any touch input at all (Home, On/Off, Volume and Mute buttons still respond). I have tried the hard reset process a number of times and still nothing.
I backed up the device to my machine and applied the latest update 5.1.1 and still no response. I then did a factory reset and still nothing.
I have never dropped or damaged my iPad in any way.
Does anybody know of any ongoing issues with the touch screen or a solution to this problem?

Thank you.
I've already booked myself in to the Genius Bar this week.
I suspect it is a hardware failure and more specifically a loose internal connection.

Wi-fi not working even after phone reset to factory settings

My wi-fi was not working anywhere so someone at the Apple store reset my phone to factory settings and the wifi is still not working. It says Unable To Join Network when I try to join a wifi network.

I've been having problems myself since 1.1.2. I have to constantly turn off WiFi and then turn it back on again before it will find my home network, even when I'm standing right in front of it. I never had this problem with 1.1.1
I wish Apple would put in some actual features with the updates instead of just trying to one-up the hackers and screw up everything else on the system. I am glad to finally have my custom (non-financially-extorted) ringtones back though. Now, if I could have my ringtones AND working WiFi...

Email Hyperlinks not Working even after LaunchServices Reset

Had a pretty bad crash recently resulting in having to purchase and set-up a new hard drive on my G4. Did a clean install of system software then went through all the updates and was able to restore my applications, etc. from my daily back-ups.
Most things are back to normal ... except my Mail, which is somewhat funky. One thing that's no longer working are hyperlinks in email bodies. I can't simply click on them to go the the url. I have already reset the launch services files as instructed in the X Lab (http://thexlab.com/faqs/resetlaunchservices.html). Also tried doing that through Cocktail, the utility program I have.
Nothing seems to be working. Any thoughts?

I would start by doing this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Then download and install AppleJack 1.5 from VersionTracker or MacUpdate. Read its instructions carefully then use it to perform some essential maintenance routines.
Let's see how that goes.

HP Officejet Pro 8600 Plus will not copy even after hard reset

HP Officejet Pro 8600 Plus on Windows 8 OS
Will print from computer; will scan documents & save to computer; will NOT copy document on the unit.
Shut down printer; unplugged from wall and back of unit; held on/off button for 60 seconds; plugged back in; started unit.
Placed document on glass; hit copy; hit black; Unit pulls sheet of paper; unit scans document (squeaks while scanning); after period of time, it spits out paper & reads "copy cancelled", but does not clear or return to home screen.
HELP!!
This question was solved.
View Solution.

Hello,
Please check your private message inbox for the reset I'm going to send you.

PLEASE HELP IPOD NOT WORKING EVEN AFTER FACTORY RESET!!

I am having terrible problems with my ipod mini... it was my sister's earlier and I got it because she gave up on it. I have done everything in my power.. tried the 5'R's, reinstalling itunes, and everything INCLUDING the factory reset, and the same thing is persisting... the exclamation mark with file, and it just says to visit http://www.apple/support/ipod, which i've gone to several times, read everything relavent, and still nothing helped. Please someone help, any thing could work so please, i'd really appreciate it, I look foreward to your opinion!!

iPod Folder with Exclamation Point After Disconnected From Computer
iPod Folder with Exclamation Point After Turned On
Good Thread About iPod Sad icon/Folder with Exclamation Point
I hope this helps!

HT201412 iPad screen does not respond, even after several resets (both with iTunes and at the Apple Store). Apple is also unresponsive to a hardware problem once the product warranty period has expired. Does anyone have a suggestion?

It is getting very frustrating to have Apple products.
Constant software upgrades and product releases seems to be the sole focus of Apple.
Apple does not offer hardware repair services. I can understand this policy when products do not fail. But it seems that this is not the case with Apple, as it becomes frequent that products fail just after the warranty period.
New software releases also destroyed the value of a "GREAT EXPERIENCE". YouTube, Google Maps, ... all features that are deleted with the latest IOS and that Apple could not properly replace.
It seems that Apple products are not 'consummable' products but 'disposable' products.
Let's see how robust SAMSUNG tablets are

Apple has hardware repair services, on repairable hardware. Apple just doesn't repair iPads, from day one Apple has always replaced iPads, either under warranty or as a reduced cost out-of-warranty purchase.
The rest of your post is just a rant. Enjoy your Samsung products.

My iPad 2 camera is not working even after factory reset, what can I do??

Ever since I've had an update for my iPad As I've had this for nearly 2 years now and I have tried everything to fix this camera, including a factory reset and nothing has worked.. Please help me!!

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download

All iPad buttons are not working even after resetting it (hard, soft and via iTunes).

All iPad 2 buttons are not working even after I resetting it. I tried both of the hard and soft reset, and even resetting my iPad via iTunes.
The volume buttons work after I tried this method : "hold iPad in landscape mode. Push the home button while rotating it to Portrait mode, release it."

I have the same issue, nothing I did fixed the problem, I would suggest if you can visit apple store and give us your feedback with them.
for me I can't go to apple store because I don't have any store near me, I will have to wait for 2 months to travel!

What should I do if my touch screen is not working?

My touch screen is not working and I can reset my ipod because I cant turn it off. Help!

- Are you saying that yu can't do this?
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Do it if you can.
- Next connect to the computer and restore from backup via iTunes
- If problem persists, retore to factory defaults/new iPod.
If iTunes does not see the iPod try placing the iPod in recovery mode and then restoring. For recovery mode:
iPhone and iPod touch: Unable to update or restore
You can also use this program
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov

Ipod touch screen not working even after resetting to factory specs

ipod touch screen not working even after resetting to factory spec. lock symbol appears at top

That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.

My touch screen will not work at all. I cant even turn it off, so i dont know what do to?

My touch screen will not work.

Hey ajnissly25,
Thanks for the question. If I understand correctly, the touchscreen on the iPhone wont work. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
Thanks for using Apple Support Communities.
Have a great day,
Mario

I have an ipod touch 3rd generation and the whole touch screen is not working.

I have a 32gb ipod which I bought for fifty dollars and when i bought it had a pretty baddly cracked screen but thing is it worked fine. Every part of the screen worked fine; it was as senstive where the screen was cracked as the areas of the screen that were not cracked. I dropped it a couple times from like two or three feet on two a hard wood floor about four times all it did was make the cracks on the screen a little worse. Then one day I dropped it from about a foot and now the whole touch screen is not working does anyone know why this is. They told me at the ipod store to get a new one would be 130 to trade mine in. But the thing is I very mechanically inclined and I am very good with electrionics; I was planing on buying the glass for fifty bucks and putting it on myself because I read how to do it and I am more then capapble of doing it. But now since the touch screen is now working; do I need a new screen along with a new glass? See the thing is because I think both those part cost 120 together. Which would not be worth me doing that when I can go to the ipod store and they would trade me a new one for 130 bucks. But the issue is, they told me at the ipod store they would have to look and see how damaged the ipod is to see if they will exchange it. My screen is severly cracked; also I have a dent that is a half inch long and 1/8th inch deep in the back of my ipod and its very scracthed up; do you thing an ipod store would exchange it in the condition it is in. Also has anybody had this problem before and I was wondering if it would be possible for me to take it apart and fix it my self without buying any new parts.

If I were you, I would pay the $130 for a replacement. Then you can be sure that it has all the working parts it needs.

Touch screen in not working even after Hard Reset

Similar Messages

Maybe you are looking for