Touch Screen Not Calibrated

I am trying to set up my Palm TX and the touch screen is not calibrated correctly.  When I touch an icon on the right side of the screen, it looks as if I'm touching something on the left side of the screen.  This is very frustrating.  I've heard that I might need to do a hard reset on the Palm, but need assistance. Can anyone help me? 
Thnx
Post relates to: Palm TX

Hello and thank you for using the Palm Help Forums!
First I would go into your Preferences on the device. In there click "Touchscreen" then Allign Screen. Tap on the targets the most accurately you can. The target will shift 3-4 times during this process. After the allignment is complete see if you are experiencing the same issue. If so, you may need to hard reset the device.
I hope this is helpful and let me know how it works out.
-Pat
Post relates to: Treo 800w (Sprint)

Similar Messages

  • IPad touch screen not calibrated

    My iPad's having problems with its touch screen because sometimes when I type with certain keys, it enters the key twice which is very annoying.
    I'm actually typing on my iPad now and it's aautocorrect is the only thing that's fixing it right now. It seems like the lower right of my screen is very uncalibrated along with various spots. This also occurs in apps. For example, when I drag my finger across the screen to drag things it goes back to where it was at random intervals. Say I'm dragging an app to the first page, sometimes the app ggoes back to where it was when I'm a about to place it. I've tried resetting and restarting the iPad but it still has this problem. If aautocorrect wasn't on, this message would just aappear aass gibberish due to all of the double letters appearing even though I tap the key once.
    This problem appears on every aapp and is on the iPad itself.

    Try doing a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if that appears.
    If that does not help, take the iPad to an Apple store genius bar and have the techs check out the screen to see if there is a hardware fault.

  • Droid Eris Touch screen not calibrating

    I've had my Eris since December '09.  A few days ago I noticed a significant decrease in the touch screen sensitivity.  Yesterday, I noticed that part of the screen is almost completely unresponsive, unless I held it down for a long time or tapped the screen hard.
    Today, when I press the symbol to home, instead, it will select whatever is in the upper left corner, and the same for the lower right corner, selecting the upper right corner instead.
    I've tried to recalibrate it, but all I can do is recalibrate the keyboard.  Is there a way, without doing a hard reset, to fix this?

    That's most likely a hardware issue--either a component in the screen has failed or is in the process of failing. Your best bet is to bring it into a Verizon store for support--make sure to back up your data ahead of time, as they're required to try a factory reset before giving you a refurb unit. No sense in doing the reset yourself for a hardware issue when they're going to have to do it anyway.
    And if you do need a refurb, make sure to ask them to swap your current SD card into the refurb unit, so you don't lose pictures, etc.

  • IPhone 4 touch screen not working

    iPhone 4 touch screen not working properly. Sometimes it activates icon itself. After updating to iOS 6.12, it stop working totally.

    Good Morning S.GOPINADHAN,
    I understand your iPhone screen is black and you are not able to turn it on.  The article below will explain what to do when your iPhone is not responsive.  I'll also include instructions on how to back up your iPhone when you are able to turn it on.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    https://support.apple.com/en-us/HT201412
    iCloud: Back up your iOS device to iCloud
    https://support.apple.com/kb/PH12520?locale=en_US
    Regards,
    - Judy

  • LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

    Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
    Anybody know of a way round this?

    Hi @dnhowes ,
    I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Was it the Nvram reset back to factory settings that you tried or a hard reset?
    Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
    I find that on the Lab printers when I am selecting different menus.
    If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Lenovo A1 - Touch screen not working after digitizer replacemen​t

    After dropping my tablet and breaking the digitzer, I ordered a replacement digitzer from a company in China. (It took about a month to get it) After watching this video, I was able to install my new digitizer and it finally looked new again....well at least the screen!
    But.....when I powered up my tablet, the touch screen wasn't working..... I emailed back and forth with the company and they told me to install drive program, and send me a link to a site with a video, this site may have contained more than the video, but it was all in Chinese and I couldn't figure it out even with Google Translate. So I started researching. I thought I would try and load ICS on it, I thought, "Whats the worst thing that could happen?" it wasn't much more than a brick at this point anyways. 
    I found this website that let me through installing ICS on it. I had absolutly no expectations...but IT WORKED!!!! MY TOUCH SCREEN IS NOW WORKING!!!! I COULDN'T BELIEVE IT!!!
    When I was researching for this problem, there was absolutly no posts anywhere for "Touch screen not working after new digitizer". So I wanted to share my experience.

    Yea you are correct.....it must be a hardware problem. You must contact service centre of Lenovo and get help from there.
    You can say thank you by pressing the star left to my post IF I HELPED YOU

  • Touch screen not responding as it should

    Touch screen not responding properly and keeps locking up.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • 8500 All in One - touch screen not working

    One minute the touch screen with all it's functions was working fine and then, bam (!), the touch screen stopped working and I can't even use the one/off switch to power the unit off - it does not respond.  Funny thing is that the printer is still working from my computer so I can still send a print job via the wireless.   With the touch screen not working I can't use any function from the unit itself (copy a hard copy, fax a hard copy) and if the unit runs out of paper I have to unplug it to reboot since I can't hit the 'enter' on the touch screen once I've reloaded. 
    Bottom line --- nothing from the unit itself works.  Has a printer fairy locked me out or does this sound like a hardware error?  Thanks for any help ...
    Linda T

    Excellent.  Let me know how round 2 treats you.  The sad demise could have been due to a couple of things...as a side question, is the climate where you live especially dry right now?  I may request that our testers recheck how well we handle a static shock on the product if it is dry where you live. 
    Regards, CF
    I work for HP and hope to make your day Sproutastic!

  • Ipad mini- touch screen not working:(, Ipad mini- touch screen not working:(

    Ipad mini touch screen not working

    Try giving it a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and then see if your touch screen is back.

  • Ipod touch screen not working even after resetting to factory specs

    ipod touch screen not working even after resetting to factory spec.  lock symbol appears at top

    That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.

  • I have a touchsmart 320 pc and i just upgraded to windows 8 , my touch screen not working

    i have a touchsmart 320 pc and i just upgraded to windows 8 , my touch screen not working

    Just activate the Windows 8 OS via an internet connection, then install all optional, recommended and important drivers from Windows Update, reboot and it'll work.
    [Windows Key] --> Control Panel --> View by: Large icons --> Windows Update --> Scan for updates

  • Reset iPad when touch screen not working

    How can I hard reset my iPad when the touch screen is frozen?

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Ipod touch 32 GB touch screen not work

    32GB  ipod touch touch screen not work  WHAT TO DO SOME BODY HELP ME MY PHONE NUMBER 09880252978

    If your iPod is not dry, dry it before further use. To dry:
    How to fix a wet iPod or iPhone | eHow.com
    It recommends drying for seven days and changing rice every day.

  • IOS 5 Safari touch is not calibrated

    Safari on iOS 5 is not responsding to the touch. We have a website that was working fine iOS4 and with upgrade to iOS5, the website has been very unreliable. The touch is not calibrated correctly, the focus lands atleast 3-5 mm above the touch point. This happens after using the website for a while, sometimes a simple refload of the web page works but most of the time there is no work around.
       Any inputs would be very helpful, thank you.
    Thanks,
    Rob.

    My point is that it isn't an iOS 5 issue. If it were you would see threads with half a million views on the subject (like the battery life threads). It is an issue with your phone. Can you make voice calls? Is your phone jailbroken? If it was, and you updated it, you have bricked it.

  • My ipad mini ios 6.1.3 touch screen not responding

    after just a week of minor usage my brand new ipad mini touch sensor stopped working have updated it, resetted it, and restored it , it worked after the first restore then went back to the same condition restored it again and again but nothing what am i supposed to do with it now

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

Maybe you are looking for

  • How to find out if textFrame is really a table?

    Hey, I tried to find a solution for this on Google and in the forums, but I couldn't find it. I also tried different things, like "currentItem.hasOwnProperty('tables')", but of course this is true for every textFrame. I am searching for something lik

  • How to find System date in the query

    Hi, I have requirement where in the query I need to select the Document delivery date = today's date or system date. Can any once please let me know how to write the query? Murali

  • Why Are Reader Patches Not Combined?

    It is so very inconvenient to have to patch Adobe Reader multiple times, especially when first installing.  Additionally, it takes great effort to determine which patches are already applied so that the correct one(s) can be added.  Patches should be

  • Cannot create playlist with new OS

    I just updated my touch (3rd generation) to OS5.1.1 and now I cannot create a playlist on my device.  I used to be able to just right click on the music folder under my device and create a playlist that I could drag music into, but now that doesn't h

  • UIX Visual editor for OAF development??

    Hi All Please let me know if anyone has used UIX Visual editor for developing OAF pages using JDeveloper 10.1.3. Where can we find UIX editor. Is this a seperate tool that needs to be installed or its integrated with JDeveloper.